. Køb Studio & Recording Equipment hos CC ProShop (2) .

Studio & Recording Equipment

NULL

Studio & Recording Equipment

Aktive filtre

  • Status: Disponibel
  • Mærker: Adam Hall Accessories
  • Mærker: Adam Hall Stands
  • Mærker: Gravity
  • Mærker: Palmer
Universal stand for keyboards and equipment
  • På tilbud!
  • -50,00 kr.
search

Universal stand for...

SKS 05

The SKS 05 carries equipment such as keyboards, mixers or amplifiers safely and reliably. This versatile stand is adjustable in height and length and features a particularly solid construction which makes it suitable for loads of up to 50kg. The stand can be folded to a compact format for easy transportation.

Pris 469,00 kr. Normalpris 519,00 kr.

På fjernlager

Keyboard Stand black
  • På tilbud!
  • -30,00 kr.
search

Keyboard Stand black

SKS 01

X-frame keyboard stand

Standard, ideal for beginners

Pris 259,00 kr. Normalpris 289,00 kr.

På fjernlager

Gravity Keyboard Stand X-Form
search

Gravity Keyboard Stand...

KSX 2 W

The KSX 2 is a stable, solid keyboard stand with a double X support and a 65 kg load capacity. The height can be comfortably adjusted up to 90 cm with the quick lock. The black powder-coated steel design boasts reinforced junctures for maximum durability and long-lasting, non-slip end caps.

Pris 509,00 kr.

På fjernlager

Gravity Keyboard Stand X-Form
search

Gravity Keyboard Stand...

KSX 1

The KSX 1 is a stable, solid keyboard stand with an X support and a 55 kg load capacity. The height can be comfortably adjusted up to 90 cm with the quick lock. The black powder-coated steel design boasts reinforced junctures for maximum durability and long-lasting, non-slip end caps.

Pris 379,00 kr.

På fjernlager

Gravity Set with keyboard stand X-Form double and rapid desk
  • På tilbud!
  • -90,00 kr.
search

Gravity Set with keyboard...

KSX 2 RD

Especially on tour it is important that all instruments, equipment and accessories are compactly packed and can be easily stowed away in the bus. That's why the Gravity Rapid Desk Set combines the stable Gravity KSX2 keyboard stand with a double X-form and the Gravity Rapid Desk 1. That makes it easy for you to put up a sturdy table in a few simple steps and also to take it down into two separated flat pieces. Plus, this combination works in pretty much every situation, no matter if you're playing in the studio or practicing in the rehearsal room.

Measuring 100 cm wide and 48 cm deep, its large table surface provides you with plenty of room to arrange your laptop, DJ mixer, controller or even a small rack synthesizer just the way you like. The stand and tabletop can hold up to 60 kg in weight, whereas the vents in the powder-coated steel support plate ensure your equipment is kept perfectly cool.

In terms of set-up, all you have to do is slide the upper bars of the keyboard stand into the slots located on the bottom middle of the support plate and then open the X-stand. There's absolutely no need to fasten or screw tight the support plate.

Pris 769,00 kr. Normalpris 859,00 kr.

På fjernlager

Gravity Height Adjustable Stool with Footrest
search

Gravity Height Adjustable...

FM SEAT 1

Long rehearsals or gigs usually mean hours of standing for musicians - whether on the microphone, guitar or other instruments. A flexible, comfortable standing aid ensures increased comfort, preventing early fatigue and relieving back strain.

The standing aid FM Seat 1 by Gravity is suitable for universal use on stage, in the rehearsal room or at home while practising; for guitarists, bass players, pianists, string players, wind players and singers. It boasts several of Gravity's special hallmark features.

Let's take a look at the seat first: It has an attractive leatherette covering and can be tilted forwards or backwards at continuously variable angles.

Let's move onto the adjustment options offered by this standing aid: The frame is made of solid steel and with a generous height adjustment range of 67 cm to 97 cm, a comfortable seating position can be achieved for any body height. The continuously height-adjustable footrest additionally reliefs the back while also allowing one or both legs to be rested.

Another extremely practical aspect is the integrated levelling foot. The tubular base construction is fitted with our KS Vari-Foot® 1. This ensures a stable and secure footing even on uneven surfaces by means of a simple screw mechanism.

The FM Seat®1 is quick to assemble by means of a folding mechanism and can be folded flat for transport - so it fits into any narrow gap when loading.

And for those who are looking for even greater comfort, a practical Gravity GFMBR1 backrest is optionally available that likewise features continuously variable height adjustment.

In short, our FM SEAT 1 is the ideal standing aid for a wide range of applications!

Pris 1.299,00 kr.

På fjernlager

Gravity Tilting Tier for GKSX Keyboard Stands
search

Gravity Tilting Tier for...

KSX 2 T

Tilting tier for Gravity X-type keyboard stands. Upgrade your keyboard stand by attaching a second tier for an additional keyboard. The universal and easy to use mounting and adjustment options require no tools whatsoever. The tilting angle of the tier is adjustable in fine incremental steps _ markings on both arms help in finding the right angle. The tier is compatible with tubes measuring an inner diameter of at least 20 mm.

Pris 379,00 kr.

På fjernlager

Gravity Height-Adjustable Folding Keyboard Bench
search

Gravity Height-Adjustable...

FK SEAT 1

Piano and keyboard players often have to sit for hours on end during long rehearsals, gigs or recording sessions. Having a flexible and comfortable keyboard bench enhances comfort, improves posture and prevents you from getting tired too quickly.

Gravity's FK SEAT 1 keyboard bench, which can be used for a variety of different applications on the stage, in the rehearsal studio or while practicing and composing at home, is for keyboard players, guitarists, bass players, and musicians of string and wind instruments.

It boasts several of Gravity's special hallmark features.

On the one hand, the seat has a range of functions: it is covered with a mix of leatherette and fabric to ensure the seat surface can breathe in all the right places. This provides an elevated level of comfort. The FK SEAT 1's unmistakable and appealing design is also made possible by this combo of materials.

On the other hand, it is worth noting that the bench's height can be adjusted to provide the optimal sitting position for every body size and every type of instrument. The necessary stability is provided by the solid steel frame.

The integrated leveler is another very useful element, and the tubular base construction is outfitted with our KS VARI®-Foot 1. The simple screw-lock mechanism lets the bench stay firmly and securely fixed in place, even on bumpy surfaces. The FK Seat's 1 hinge mechanism allows the bench to be quickly set up, taken down and folded flat for transport. It can thus fit into virtually any space during loading. In short, our FK SEAT 1 is the ideal keyboard bench for a wide range of applications!

Pris 1.029,00 kr.

På fjernlager

Folding Keyboard Bench With Extra Thick Padding
search

Folding Keyboard Bench With...

SKT 17

The SKT 17 is an ultra comfortable single X brace keyboard bench with a 52 x 24 cm high density foam padded seating area and adjustable height from 36 to 52 cm. The durable construction is made of black powder coated heavy duty steel. The legs feature non-slip rubber ends and fold completely flat for easy transport and space saving storage.

Pris 439,00 kr.

På fjernlager

Gravity Musician Seat with Guitar Stand
search

Gravity Musician Seat with...

FG SEAT 1

Compactness is the key word here because who isn't familiar with forgetting their guitar stand in a hurry on the way to the gig, the stool at the concert venue not being comfortable and the guitar slipping off your leg because the stool is too high. For this there is now the Gravity® FG SEAT 1 musician seat. A clever stool with integrated stand and adjustable footrest for a bar-like feeling on every stage and at home.

The guitar bar stool is a round musician seat designed for guitarists, bassists and singer-songwriters. It boasts several of Gravity's special hallmark features. Firstly, there is the design and functionality of the seat: It is made from a combination of leatherette and fabric. This ensures that the seat surface is breathable at the right places, which significantly increases sitting comfort. This combination also gives the stool a unique and appealing design.

A second highlight is the sophisticated stable body mount for your guitar. This can be folded down and can securely hold any conventional guitar, whether acoustic or electric. Further up, the neck of the guitar is held by a pull-out arm, which can be locked to protect your instrument from any falls. At the touch of a button, the arm can be elegantly retracted under the seat when not in use. For transport, the FG SEAT 1 fits into any narrow space as it can be folded flat.

A third very practical aspect is the particularly stable and height-adjustable footrest. This can be easily pulled up with your foot and enables you to quickly find the optimal leg angle. This way, you always keep your guitar in a perfect position.

In short, the FG SEAT 1 is a compact 3-in-1 solution for you and your guitar!

*Not suitable for long-term use with guitars that have a nitro lacquer finish.

Pris 989,00 kr.

På fjernlager

Gravity Height Adjustable Stool with Foot and Backrest
search

Gravity Height Adjustable...

FM SEAT1 BR

Long rehearsals or gigs usually mean hours of standing for musicians - whether on the microphone, guitar or other instruments. A flexible, comfortable standing aid ensures increased comfort, preventing early fatigue and relieving back strain.

The standing aid FM SEAT 1 BR by Gravity is suitable for universal use on stage, in the rehearsal room or at home while practising; for guitarists, bass players, pianists, string players, wind players and singers. It boasts several of Gravity's special hallmark features.

Let's take a look at the seat first: It has an attractive leatherette covering and can be tilted forwards or backwards at continuously variable angles.

Let's move onto the adjustment options offered by this standing aid: The frame is made of solid steel and with a generous height adjustment range of 67 cm to 97 cm, a comfortable seating position can be achieved for any body height. Even more comfort is provided by the FM BR 1 backrest. It is also covered in pleasant leatherette and can be flexibly adjusted in height and distance to the seat, allowing you to find your perfect sitting posture.

The continuously height-adjustable footrest additionally reliefs the back while also allowing one or both legs to be rested. Another extremely practical aspect is the integrated levelling foot. The tubular base construction is fitted with our KS Vari-Foot® 1. This ensures a stable and secure footing even on uneven surfaces by means of a simple screw mechanism.

The FM SEAT 1 BR is quick to assemble by means of a folding mechanism and can be folded flat for transport - so it fits into any narrow gap when loading.

In short, our FM SEAT 1 BR is the ideal standing aid for a wide range of applications!
Pris 1.989,00 kr.

På fjernlager

Gravity Round Musicians Stool
search

Gravity Round Musicians...

FD SEAT 1

For musicians, long rehearsals or recording sessions usually mean sitting for hours on end. Whether playing the drums or other instruments. A flexible and comfortable seat provides more endurance and a better atmosphere for everyone.

The FD SEAT 1 from Gravity is a round musician's chair for universal use: In the studio, on stage, in the rehearsal room or at home practicing. For drummers, guitarists, bassists, pianists, strings or wind instruments. It boasts special characteristics typical of Gravity. On the one hand, the functionality of the seat: In contrast to most current models from other manufacturers, it is not only made of leather/ imitation leather or fabric, but of a mix of materials. This ensures that the seat surface is breathable at the right places, significantly increasing comfort. In addition, this mix gives the FD SEAT 1 an unmistakable and appealing design that sets it apart from the crowd.

A second highlight is the ingenious height adjustment: It is based on a threaded rod, but with a certain twist. For fine adjustment, simply loosen the locking screw and turn the seat in the appropriate direction. For larger height adjustments, however, the seat surface can simply be pulled up or down and then tightened with the knurled nut. This saves time and nerves! And thirdly, the Gravity chair has a particularly sturdy leg construction made entirely of metal. The legs are double-braced and the feet are large enough to ensure stability and reliability.

Pris 879,00 kr.

På fjernlager

Gravity Studio Monitor Speaker Stand
  • På tilbud!
  • -60,00 kr.
search

Gravity Studio Monitor...

SP 3102

A mix's sound and feel is heavily influenced by having your monitors placed in the proper position. In a home studio, however, where space is at a premium, it's not always possible to put your studio monitors right next to a table using suitable stands. The Gravity SP 3102 is the solution to this problem. The flexible, powder-coated steel stand squeezes onto pretty much any desk. The edge of the solid base is only 25 cm in length. Monitor boxes weighing up to 25 kg can be flexibly positioned at the height you want, and EVA padding and tilting protection make it possible to vertically angle them by up to 15° and horizontally rotate them 360°, meaning you can always find the perfect position for your studio monitors. The colourful G-rings make a clear design statement and can be swapped out in mere seconds. An additional black ring set is also supplied with the product.

Pris 529,00 kr. Normalpris 589,00 kr.

På fjernlager

Gravity 2-Point Adjustment Boom Arm
search

Gravity 2-Point Adjustment...

MS B 21

This 80 cm boom arm features a cast aluminium hub with precision 2-point tilt and position adjustment and 3/8" male thread. The ergonomic set screw knobs are made from high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation.

Pris 199,00 kr.

På fjernlager

Tripod Microphone Stand with Boom Arm and Locking Leg
  • På tilbud!
  • -30,00 kr.
search

Tripod Microphone Stand...

S 10 B

This microphone boom stand is made of hardwearing steel tubing with black powder coating finish. It features a durable tripod base with locking leg that eliminates the need for a set screw. Folding the locking leg halfway allows you to slide the leg collar up and down the shaft, folding it to the upper or lower stop locks the collar in place for quick setup or compact transport.

Pris 249,00 kr. Normalpris 279,00 kr.

På fjernlager

Gravity 2-Point Adjustment Telescoping Boom Arm
search

Gravity 2-Point Adjustment...

MS B 22

This telescoping boom arm features a cast aluminium hub with precision 2-point tilt and position adjustment and 3/8" male thread.

The ergonomic set screw knobs are made from high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation.

A convenient quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement.

Pris 239,00 kr.

På fjernlager

Microphone Stand with Boom Arm
  • På tilbud!
  • -30,00 kr.
search

Microphone Stand with Boom...

S 9 B

Small microstand black for guitar, amp, drum, brass a.s.o.

Pris 229,00 kr. Normalpris 259,00 kr.

På fjernlager

Table Microphone Arm with Built-In XLR Cable
  • På tilbud!
  • -40,00 kr.
search

Table Microphone Arm with...

S TBA 01

No matter if you're a podcaster, content creator, or home producer looking to equip your creative workspace with a microphone arm and keep your cables tidy and out of the way, the Adam Hall Stands S TBA 01 is just what you need.

The freely movable and robust microphone arm can be easily attached to any tabletop using the supplied table clamp.

Cables won't get tangled up thanks to the 3 m XLR microphone cable that's integrated inside the arm.

The Adam Hall Stands S TBA 01 microphone arm is perfect for your home studio or multimedia workstation.

Pris 279,00 kr. Normalpris 319,00 kr.

På fjernlager

Tabletop Microphone Stand
  • På tilbud!
  • -20,00 kr.
search

Tabletop Microphone Stand

S 8 BB

Stable microphone stand with base plate made of cast steel. The round base is equipped with rubber feet for soundproofing. The tripod tube can be unscrewed and has a 3/8" thread.

Pris 139,00 kr. Normalpris 159,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base
search

Gravity Microphone Stand...

MS 23 W

The MS 23 is a premium-quality microphone stand with thick walled tubing, white powder-coated finish and 160 cm maximum height. The exceptionally stable round base, made of cast iron, is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

For smooth, durable height adjustment, the MS 23_s handle is made of high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

VARIWEIGHT® compatible _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

An additional set of black coding rings is included with the MS 23; more ring packs are available in a wide array of colours for instant personalization.

Pris 439,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod Base and 2-Point Adjustment Telescoping Boom
search

Gravity Microphone Stand...

MS 4322 W

The MS 4322 is a premium microphone stand which features heavy-duty construction, powder coating and a maximum height of 169 cm. The extremely stable base features a zinc die-cast bell and generously proportioned, precision-folding steel legs with durable rubber caps to protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick-release adjuster enables variable extension to a maximum length of 88 cm, facilitating flexible microphone placement. The smooth yet robust height adjustment grip and screw knobs of the MS 4322 are made from highly durable ABS with a non-slip, soft-touch thermoplastic coating for comfortable use. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

An additional set of black coding rings is included with the MS 4322; more ring packs are available in a wide array of colours for instant personalisation.

Pris 519,00 kr.

På fjernlager

Gravity Short Microphone Stand with Folding Tripod Base and 2-Point Adjustment Boom
search

Gravity Short Microphone...

MS 4221 B

The MS 4221 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the 50 cm boom arm. For easy height adjustment the MS 4221 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4221 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 449,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base and 2-Point Adjustment Boom
search

Gravity Microphone Stand...

MS 2321 B

The MS 2321 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 168 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features convenient 1-point tilt and position adjustment of the 79 cm boom arm. For easy height adjustment the MS 2321 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 2321 B, additional ring packs are available in a wide array of colours for instant personalization.

Pris 529,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod Base
search

Gravity Microphone Stand...

MS 43

The MS 43 is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

For easy height adjustment the MS 43 sports a smooth, durable clutch with an ergonomic threaded handle made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 43, additional ring packs are available in a wide array of colours for instant personalization.

Pris 379,00 kr.

På fjernlager

Gravity Short Microphone Stand with Round Base and 2-Point Adjustment Telescoping Boom
search

Gravity Short Microphone...

MS 2222 B

The MS 2222 B is a premium-quality microphone stand with thick walled tubing, black powder-coated finish and 73 cm maximum height. The exceptionally stable round base, made of cast iron, is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The position and angle of the boom is precisely adjusted with 2 tensioning knobs on the bracket. A quick fastener allows for variable extension to a maximum length of 88 cm, facilitating flexible mic placement. For smooth, durable height adjustment, the MS 4222 B_s handle and knobs are made of high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

An additional set of black coding rings is included with the MS 2222 B; more ring packs are available in a wide array of colours for instant personalization.

VARIWEIGHT® compatible _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

Pris 519,00 kr.

På fjernlager

Microphone Stand with Boom Arm
  • På tilbud!
  • -30,00 kr.
search

Microphone Stand with Boom Arm

S 6 B

Microphone stand black

  • telescopic boom arm
  • plastic-covered metal base with folding legs
Pris 309,00 kr. Normalpris 339,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod and One-Hand Clutch
search

Gravity Microphone Stand...

MS 431 HB

The GMS 431 HB is a premium quality microphone stand with thick walled tubing, powder coated finish and 179 cm maximum height. The heavy duty tripod base is made of die-cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

The GMS 431 HB sports a slim, innovative clutch for convenient one-handed height adjustment. The ergonomic design and soft touch surface of the clutch handle provide a secure grip in all situations. The custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the GMS 431 HB, additional ring packs are available in a wide array of colors for instant personalization.

Pris 469,00 kr.

På fjernlager

Gravity Cab Clamp Microphone Holder for Guitar Cabinets
search

Gravity Cab Clamp...

MS CAB CL 01

This universal clamping system allows you to mic up a guitar cabinet in an easy and revolutionary way. The spring-loaded clamping arm makes the clamp suitable for almost any type of cabinet and securely fastens to the side or top of a cabinet or combo amplifier. Thanks to its adjustable edge grip, the clamp can be adjusted to fit snugly onto recessed edges. The rigid boom is finely adjustable in both boom angle and microphone depth _ this ensures a far more precise and secure mic placement as opposed to using a gooseneck-based clamping system or conventional mic stand.

Pris 409,00 kr.

På fjernlager

Gravity Table-Top Microphone Stand
search

Gravity Table-Top...

MS T 01 B

This table top microphone stand consists of a heavy yet compact die-cast base and a steel tube. Thick rubber covering the whole circumference of the base isolates it from the table and helps to minimise unwanted noise.

Pris 229,00 kr.

På fjernlager

Gravity Cab Clamp - Mic Holder for Guitar Cabs
search

Gravity Cab Clamp - Mic...

MS CAB CL 01 S

This universal clamping system allows you to mic up a guitar cabinet in an easy and revolutionary way. The spring-loaded clamping arm makes the clamp suitable for almost any type of cabinet and securely fastens to the side or top of a cabinet or combo amplifier. Thanks to its adjustable edge grip, the clamp can be adjusted to fit snugly onto recessed edges. The rigid boom is finely adjustable in both boom angle and microphone depth _ this ensures a far more precise and secure mic placement as opposed to using a gooseneck-based clamping system or conventional mic stand.

Pris 409,00 kr.

På fjernlager

Gravity Traveler Microphonestand
search

Gravity Traveler...

MS 5311 BThe Traveler Series' Microphone Stand

Every bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed.

The Gravity® MS 5311 B microphone stand can be taken everywhere you go. It's so light, there's absolutely no need for you to worry about weight or availability.

Despite its light weight, the stand is still sturdy and strong. Its robust leg construction withstands heavy loads and gives the stand a solid foundation. The position and tilt of the boom can be adjusted quickly and easily at the joint with only one clamping screw. The handle, used for smoothly and securely adjusting the stand's height, and the clamping screw are made of exceptionally durable ABS plastic and covered with a non-slip soft-touch thermoplastic coating for comfortable operation.

Gravity® has once again delivered a useful and reliable product for you to round off your collection of stands.
Pris 239,00 kr.

På fjernlager

Gravity Short Heavy Duty Microphone Stand with Folding Tripod Base
search

Gravity Short Heavy Duty...

MS 3122 HDB

Ideal for bass drum micing, the GMS 3122 HDB is a premium quality microphone stand with thick walled tubing, powder coated finish and 32 cm height. The tripod base is made of die cast zinc while the legs are made of strong and heavy folding steel. Hefty rubber cabs for surface protection complete the picture of the stand.

The boom hub features precision 2-point tilt and position adjustment of the telescoping arm. A quick fastener allows for easily variable extension to a maximum length of 88 cm, and the custom designed retainer requires no tools for quick and secure mic clip attachment.

A set of black coding rings is included with the GMX 3122 HDB, additional ring packs are available in a wide array of colors for instant personalization.

Pris 489,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base and One-Hand Clutch
search

Gravity Microphone Stand...

MS 231 HB

The GMS 231 HB is a premium-quality microphone stand with thick walled tubing, black powder-coated finish and 175 cm maximum height. The exceptionally stable round base is made of heavy-duty cast iron, while a rubber ring on the bottom ensures acoustic isolation and surface protection.

The GMS 231 HB features a new and especially convenient single-handed height adjustment function fitted with a non-slip ergonomic handle that makes it very easy to use at all times. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

VARIWEIGHT® compatible _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

An additional set of black coding rings is included with the GMS 231 HB; more ring packs are available in a wide array of colours for clear personalization. For increased stability, a 2.3 kg weight disc is available as an accessory (article no. GWS2WP) that is easy to assemble without tools.

Pris 519,00 kr.

På fjernlager

Gravity Short Microphone Stand with Folding Tripod Base and 2-Point Adjustment Telescoping Boom
search

Gravity Short Microphone...

MS 4222 B

The MS 4222 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The folding tripod base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4222 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4222 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 469,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base and 2-Point Adjustment Telescoping Boom
search

Gravity Microphone Stand...

MS 2322 B

The MS 2322 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 168 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 2322 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 2322 B, additional ring packs are available in a wide array of colours for instant personalization.

Pris 559,00 kr.

På fjernlager

Gravity Microphone Stand with XLR Connector and Gooseneck
  • På tilbud!
  • -90,00 kr.
search

Gravity Microphone Stand...

MS 23 XLR B

Enabling ultra flexible microphone orientation, this premium quality stand features a 36.5 cm gooseneck on a thick walled 114.5 cm tube and a heavy duty round base made of cast iron.

The gooseneck integrates a 3-pin female XLR connector for directly attaching a microphone while the tube sports a lateral XLR mic cable connector at the bottom end. This permits quick, clean setup without mic clips and running the cable up the stand.

To extend the stand's height and increase stability, additional XLR goosenecks and a weight disc are available as accessories.

Pris 699,00 kr. Normalpris 789,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod Base and 2-Point Adjustment Boom
search

Gravity Microphone Stand...

MS 4321 B

The MS 4321 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

The boom hub features precision 2-point tilt and position adjustment of the 79 cm boom arm. For easy height adjustment the MS 4321 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4321 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 489,00 kr.

På fjernlager

Palmer Passive 2-channel DI box
search

Palmer Passive 2-channel DI...

RIVER elde

Are you looking to pick up the raw signal from a guitar, bass or keyboard without noise and tonal loss, even over long cable runs? That's exactly what the Palmer elde does - simply and reliably. Especially since the elde is a classic passive DI box, and it even has a dual-channel design. This means you can use it for stereo signals as well as for two different instruments.

The inputs are each looped to a THRU Out, allowing the signal to be passed on to the guitar/bass amplifier. For very high level signals, each channel has its own pad switch (-30 dB), so you can also insert the elde between the amplifier output and the loudspeaker. The output signals are balanced and with low impedance, so that they can withstand even longer cable runs without damage. Impedance conversion and balancing is done passively via a transformer, which also provides galvanic isolation. Each channel has its own ground lift switch to eliminate ground loops.

The Palmer elde is a high-quality two-channel DI box that is extremely easy to use. Due to its passive design, it requires neither batteries nor phantom power. This makes it extremely reliable and failure-proof. With its robust aluminium/steel housing, the Palmer elde easily withstands rough everyday use on stage, and with its clean, unaltered sound, it also excels perfectly in the recording studio.

Pris 1.259,00 kr.

På fjernlager

Palmer Reversed DI box
search

Palmer Reversed DI box

DI-REVERSE

People often try to connect a DI box in reverse, aiming to supply a balanced signal into an unbalanced input. Nevertheless, this approach often results in suboptimal outcomes due to mismatching. Enter the PDIR01 (DI-REVERSE), a solution designed to address this issue seamlessly, eliminating the need for adapters and ensuring optimal performance.

Pris 909,00 kr.

På fjernlager

Palmer 19" DI box 4-channel active
search

Palmer 19" DI box 4-channel...

PAN 03

Active 4-channel DI box. Each channel has a jack input with a parallel output for passing through the signal. An attenuation switch (-30 dB) allows either a line or loudspeaker signal to be connected.Active 4 x DI box, 19" format. Technical specitications identicl to the PAN-02, however, the PAN-03 is built for mains operation. All connections and switches are located on the front panel, an additional parallel XLR output is located in back. 19 inch rack-mount format, 1 rack space, 90 mm front to back.

Pris 3.499,00 kr.

På fjernlager

Palmer 19" DI box 4-channel passive
search

Palmer 19" DI box 4-channel...

PAN 03 PASS

Passive 4-channel DI box in a 19" housing. Each channel has a jack input with a parallel output for looping the signal through. An attenuation switch (-30 dB) permits connection of a line or speaker signal at the user's choice. The specifications are identical with those of the PAN 01. All connections and switches are on the 1 U front panel; the XLR output is additionally present as a parallel socket on the rear panel.

Pris 2.189,00 kr.

På fjernlager

Palmer Passive re-amplification box
search

Palmer Passive...

RIVER trave

Reamping is a valuable recording technique used by many sound engineers.

It lets you experiment at leisure by running guitar, bass, keyboard, drum and even vocal tracks through amplifiers and effects pedals. As with many other techniques, you need the right tools.

The Palmer trave is a passive reamping box that requires no external power supply. Inside is a specially developed transformer that converts the balanced line signal into an unbalanced Hi-Z signal with perfectly matched impedance for your guitar amplifier or effect pedal. At the same time, the trave prevents ground loops, which are otherwise almost unavoidable when you combine an audio interface or mixer output with a guitar amp or effects pedal. The input of this reamping box allows you to switch between consumer (-10 dBV) and professional (+4 dBu) levels, and the output level is continuously adjustable, so you can drive your amp or pedals just the way you like it.

With the Palmer trave passive re-amplification box, you can add new creative sounds and timbres to your music and ultimately be true to your sound.

Pris 979,00 kr.

På fjernlager

Palmer Active 2-channel DI box
search

Palmer Active 2-channel DI box

PAN 04 A

The Palmer PAN04A is 2-channel DI box for feeding asymmetrical and high impedance electric instrument signals into a mixing desk_s microphone inputs. It delivers a transformer balanced, low impedance signal to the outputs and eliminates mains hum and interference caused by ground loops. The active switch leaves the frequency response unaffected and achieves a high dynamic range. In addition to 6.35 mm direct outputs and -30 dB switchable input attenuation, the DI box also features a mono output that sums both channels. The PAN04A is designed to be exceptionally robust and is suitable for both stage and studio. It can be powered with 9 to 24 V DC mains adapters or phantom power when two outputs are connected to a mixer.

Pris 1.729,00 kr.

På fjernlager

Palmer DI box active
search

Palmer DI box active

PAN 02

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "floating ground" circuitry enables ground lift even during phantom power operation. Metal case 110 x 73 x 42 mm.

Pris 769,00 kr.

På fjernlager

Palmer 19" DI box 8 channels passive
search

Palmer 19" DI box 8...

PAN 16

The Palmer PAN16 is an 8 channel passive DI box in a 19" 1U rack format. Through the special MERGE LINK/IN function, the front LINK output can be used as a second input.The signal is then mono merged with the one from the INPUT jack through to the output. Thus, the PAN16 offers a maximum of 16 inputs. Two PAD buttons enable an attenuation of 10, 20 or 30 dB. The XLR outputs are electrically isolated and balanced via transformer. 8 additional LINK-sockets are also available on the rear panel of the device.

Pris 3.179,00 kr.

På fjernlager

Palmer DI box passive
search

Palmer DI box passive

PAN 01

Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.

Pris 569,00 kr.

På fjernlager

Palmer DI box 2-channel passive
search

Palmer DI box 2-channel...

PAN 04

The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This _stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell _THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals.

Pris 949,00 kr.

På fjernlager

Palmer Passive Line Isolation Box
search

Palmer Passive Line...

RIVER wupper

The more complex the setup, the higher the chance of ground loops. With the Palmer wupper Line Isolation Box, everything is quiet again so you can enjoy your audio without humming and buzzing.

The Palmer wupper is an isolation transformer in a robust aluminium and steel housing. It separates the ground potentials of two devices so that equalising currents are prevented and only your sound is transmitted - clean and without interference.

The Palmer wupper was developed for guitar and bass applications, but its brilliant, unaltered sound is just as suitable for keyboards and hi-fi equipment. The inputs and outputs with jack connections can be balanced or unbalanced. This means that the Palmer wupper can also be used to balance unbalanced signals, which allows longer cable runs without affecting the sound. Due to its passive design, the wupper requires neither batteries nor phantom power. This makes it extremely failure-proof.

The Palmer wupper is a simple, efficient humming killer: Connect it between two devices and the interference is gone. Sometimes it can be that simple!

Pris 949,00 kr.

På fjernlager

Palmer Passive Line Isolation Box with Combo Input
search

Palmer Passive Line...

RIVER iller

The more complex the setup, the higher the chance of ground loops. With the Palmer iller Line Isolation Box, everything is quiet again so you can enjoy your audio without humming and buzzing.

The Palmer iller is an isolation transformer in a robust aluminium and steel housing. It separates the ground potentials of two devices so that equalising currents are prevented and only your sound is transmitted - clean and without interference. The only difference to its sister model wupper is that the Palmer iller is equipped with a combo socket on the input side that can accept both jack and XLR connectors. This eliminates the need for adapter cables.

The Palmer iller was developed for guitar and bass applications; however, due to its high-quality sound characteristics, it is just as suitable for keyboards and hi-fi equipment. The input (XLR/jack) can be balanced or unbalanced and the output (XLR) is balanced. This means that the Palmer iller can also be used to balance unbalanced signals, which allows longer cable runs without affecting the sound. Because of its passive design, the iller requires neither batteries nor phantom power. This makes it extremely failure-proof.

The Palmer iller is a simple, efficient hum killer: you connect it between two devices and the noise is gone. Sometimes it can be that simple!

Pris 989,00 kr.

På fjernlager

Palmer 19" DI/Line Isolation box 4 channels active
search

Palmer 19" DI/Line...

PAN 08

The PAN08 is a multifunctional device. Each of the four channels can be used independently as an active DI box, line isolation box or booster. The combination socket input accepts unbalanced and balanced signals. The output has dual transformer balanced XLR jacks (front and rear).

The signal level can be attenuated by 20 dB for microphone inputs, but can also be boosted in three stages by up to 18 dB for LINE inputs if necessary. With an output level of +12 dBu on a load of 600 Ohms with 0.05 % THD / 40 Hz and an output noise level of less than -110 dBu, the unit meets even high professional standards. One special feature that is worthy of mention is battery power. The supply voltage may range from 9 to 18 V. Thus the PAN08 can also be used without mains power outdoors.

Pris 4.369,00 kr.

På fjernlager

Palmer Two Channel Unbalanced Line Isolation Box
search

Palmer Two Channel...

RIVER enz

When connecting a media player or a laptop to a HiFi- or PA system, you often experience noise such as hum and buzz caused by ground loops. With the Palmer enz,

With the Palmer enz, you can be sure that such annoying interference signals do not occur anymore!

The cause of this interference lies mostly in ground potential differences, which result in stray DC currents via the audio lines. The solution is to place a transformer between the two devices to isolate the ground line. Palmer enz has two of these transformers for its two channels. Its inputs and outputs are RCA sockets, which are common for HiFi and consumer equipment. However, the sound quality will also satisfy professionals, since the sound remains unaltered.

This makes the enz Line Isolation Box a useful problem solver for home or car HiFi systems and PA systems from conference rooms to nightclubs. A Line Isolation box simply belongs in every DJ's kit. Whenever there is buzzing and humming, the Palmer enz brings silence with a touch of a button.

Pris 1.199,00 kr.

På fjernlager

Palmer Channel Merge Line Isolation Box
search

Palmer Channel Merge Line...

RIVER vils

We've all had the same experience before:

At home the sound was crisp and clean but during the presentation it hums and buzzes and there is no time to figure out the cause.

Here is where the Palmer vils comes in handy as it safely isolates the ground potentials of the laptop, media devices and PA systems from each other. (Calm returns and the audience and you can concentrate fully on your presentation again.)

The Palmer vils has two unbalanced RCA inputs. You can use a standard Y cable with 3.5 mm jack to connect to the headphones output on the laptop. The vils sums both stereo channels to mono so that you only require one free microphone input for the connection to the PA.

The Palmer vils is extremely easy to use and its passive operation means it does not need a power supply. A resistor network and a transformer, which simultaneously balances the signal, ensure an optimal adjustment of level and impedance. This means that there is no interference even with longer cable runs.

With the Palmer vils, you can be sure that your presentations are as crisp and clear as they sound at home.

Pris 1.049,00 kr.

På fjernlager

Palmer Line Isolation Box 2 Channel
search

Palmer Line Isolation Box 2...

LI 05

Balanced or unbalanced? That_s not a problem with the BALUN/PLI05. BALUN stands for balanced-unbalanced. This means that because the PLI05 uses TRS (stereo) jack sockets, both the input and output can be operated balanced or unbalanced. The PLI05 is the PLI02_s little sister. Both speakers can be used to convert from balanced to unbalanced. Both speakers include line isolation transformers for galvanic isolation. They are connected between mains-operated audio devices to prevent ground loop hum. The PLI02 is designed for using XLR connectors and built for low impedances (600 ohm). In contrast, the use of jack sockets means that the PLI05 is better suited to higher impedances. It can be operated in the broad range of 600 ohm to over 10 kilo ohm. However, in order to minimise level loss, the input impedance should not be lower than the output impedance.

Pris 1.299,00 kr.

På fjernlager

Palmer Passive 2-channel Line Isolation box
search

Palmer Passive 2-channel...

RIVER kyll

Consumer devices, as well as many professional keyboards such as synthesisers and digital pianos as well as some small mixers have unbalanced outputs. In order to connect them to a professional sound system and to avoid interfering noise over long cable runs, balanced signal routing is needed. For this purpose, the Palmer kyll handles the necessary signal balancing.

Due to the galvanic isolation via a transformer, the kyll also eliminates ground loops. To do this, simply engage the ground lift switch. Devices that already have balanced outputs also benefit from this, since noise can occur even here. The Palmer kyll reliably eliminates hum and buzz.

The Palmer kyll is capable of very high levels. Compared to conventional line isolators for media applications, it can process much "hotter" input signals without unwanted distortion being audible: up to + 20 dBu! But the kyll can also process quieter signals without causing any sound alteration or noise, because it works purely passively with large isolating transformers. This makes the Palmer kyll extremely easy to use and fail-safe, as it requires neither batteries nor phantom power. Conveniently, the inputs are designed as combo sockets that accept jack or XLR connectors. Adapters are unnecessary! The balanced outputs are designed as professional XLR sockets.

The kyll line isolation box is a universal problem solver for eliminating humming ground loops. When connecting unbalanced equipment, the signal is simultaneously balanced. Whether at home, at lectures, in the rehearsal room, on stage, in clubs or at large events, the Palmer kyll ensures a clean sound without noise.

Pris 2.199,00 kr.

På fjernlager

Palmer Passive 2-channel media DI box
search

Palmer Passive 2-channel...

RIVER naab

If you connect a laptop to a sound system, in many cases the sound quality leaves a lot to be desired. It hums and crackles, sometimes there is also a loss of sound in the low and high frequencies. The Palmer naab, a two-channel media DI box, provides a reliable solution for this situation.

Its best in class isolating transformers and the switchable hard or soft ground lifts prevent any humming. The transformers also ensure a perfect level and impedance adjustment. The result is clean sound without any noise.

If necessary, the Palmer naab can be switched from stereo to mono, which is often very useful in practice. The mono sum signal is then available at both XLR outputs at the same time; this way, the naab can also be used as a split box.

On the input side, there is a wide range of connections: 2 x 6.3 mm jack sockets, which can be balanced or unbalanced, as well as 2x RCA and 1x 3.5mm mini jack (stereo). This eliminates the need for adapter cables - which you always forget to take with you anyway! The outputs are professional XLR sockets; their balanced wiring allows even longer cable runs without any noise.

Due to its passive mode of operation, the Palmer naab does not need a power supply; this makes it extremely failure-proof, especially as the robust metal housing can withstand a lot. The Palmer naab is the ace up the sleeve for every lecture traveller, DJ and sound engineer.

Pris 2.119,00 kr.

På fjernlager

Palmer Dual Channel Line Merger Active
search

Palmer Dual Channel Line...

MB L A

The PMBL-ACTIVE is a 2-channel stereo line level merge box that can be used to merge two stereo line signals into one stereo output. One classic application: routing two mixing desks to one PA system. The unit has enough amplification to boost even semi-professional levels accordingly. The input channels are galvanically isolated from one another. Each channel offers a mute switch and the ability to mix the stereo signal down to mono. The unit is housed in a 1 U/9.5" case and has a built-in power supply.

Pris 5.149,00 kr.

På fjernlager

Palmer Passive Microphone Merge Box
search

Palmer Passive Microphone...

RIVER tauber

Do you have two microphones, but just one free microphone input?

This problem has existed for as long as there have been PA systems! The Palmer tauber Microphone Merge Box solves the problem in a simple way. It has two balanced microphone inputs that are summed via a resistor matrix to a balanced mono signal which is routed to a single XLR output. It's as easy as it sounds!

It can be used for two dynamic microphones or two condenser microphones. Ideally, they should be identical or similar microphone types to avoid any undesirable level differences. Phantom power is passed through to both inputs.

Due to its passive circuitry, the tauber works without any sound colouration and does not require a power supply. The casing and sockets are extremely robust and longlasting.

Pris 599,00 kr.

På fjernlager

Palmer Passive 2-Channel Line Merger
search

Palmer Passive 2-Channel...

RIVER main

Sometimes it is necessary to send two stereo signals to one device, for example, when two mixing consoles have to drive a stereo power amplifier. In practice, this is rarely possible without ground loops occurring. The Palmer main solves this type of problem. It mixes two stereo input signals via a resistor matrix, whereby the input pair A is galvanically isolated by a transformer in order to avoid ground loops.

The Palmer main works purely passively. The result is a particularly low noise floor and a neutral sound. Thanks to large transformers, it can handle high-level signals up to +20 dBu without distortion. The transformers also make it possible to assign the input pair A unbalanced while the output signal remains balanced.

The passive mode of operation without a power supply makes the Palmer main particularly reliable and failure-proof. The aluminium/steel housing and XLR sockets are also best suited to the rough everyday life on stage. The Palmer main merge box solves typical sound reinforcement problems in the simplest way with uncompromised sound quality.

Pris 2.949,00 kr.

På fjernlager

Palmer Professional DI box active
search

Palmer Professional DI box...

PAN 02 PRO

The Palmer PAN02 PRO is an active DI box with outstanding additional functions. These include an unbalanced XLR input, in addition to the 3-way attenuator -10, -20, -30 dB and a switchable gain of 12 dB, connected with a maximum output voltage of +20 dBu. The ground lift switch has a "lift" position allowing adjustments between a "soft and hard grounding" . The balanced output is achieved with a high quality transformer in the Mumetall housingthat was specially developed for this purpose. The PAN02 PRO can be powered either with a 9 V battery or 48 V phantom power. A two-colour LED indicates which source supplies the power.

Pris 2.359,00 kr.

På fjernlager

Tilbage til toppen

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.