. Gravity Traveler Microphonestand .
Gravity Traveler Microphonestand
search
  • Gravity Traveler Microphonestand
  • Gravity Traveler Microphonestand
  • Gravity Traveler Microphonestand
  • Gravity Traveler Microphonestand
  • Gravity Traveler Microphonestand
  • Gravity Traveler Microphonestand
  • Gravity Traveler Microphonestand
  • Gravity Traveler Microphonestand
  • Gravity Traveler Microphonestand
  • Gravity Traveler Microphonestand
  • Gravity Traveler Microphonestand

Gravity Traveler Microphonestand

239,00 kr.
Inkl. moms
MS 5311 BThe Traveler Series' Microphone Stand

Every bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed.

The Gravity® MS 5311 B microphone stand can be taken everywhere you go. It's so light, there's absolutely no need for you to worry about weight or availability.

Despite its light weight, the stand is still sturdy and strong. Its robust leg construction withstands heavy loads and gives the stand a solid foundation. The position and tilt of the boom can be adjusted quickly and easily at the joint with only one clamping screw. The handle, used for smoothly and securely adjusting the stand's height, and the clamping screw are made of exceptionally durable ABS plastic and covered with a non-slip soft-touch thermoplastic coating for comfortable operation.

Gravity® has once again delivered a useful and reliable product for you to round off your collection of stands.
Antal
På fjernlager

Ref: GMS5311B

  • Lightweight construction
  • 1-point boom adjustment
  • Ergonomic handling
  • Solid, steady and compact leg construction
  • Solid and durable construction

Product typeStands and Tripods
TypeMicrophone Stands
Tube materialSteel
Tubing surfacePowder-coated
Min. height950 mm
Max. height1630 mm
Transport length950 mm
Height adjustmentYes
Base typeTripod
Boom model1-point adjustment
Boom length790 mm
Interchangeable rings1 x 15 mm
Interchangeable rings1 x 25 mm
Interchangeable rings4 x 20 mm
Weight1,738 kg
Gravity
GMS5311B

Specifikke referencer

16 andre varer i den samme kategori:

Gravity Microphone Stand with Folding Tripod Base and 2-Point Adjustment Telescoping Boom
search

Gravity Microphone Stand...

MS 4322 W

The MS 4322 is a premium microphone stand which features heavy-duty construction, powder coating and a maximum height of 169 cm. The extremely stable base features a zinc die-cast bell and generously proportioned, precision-folding steel legs with durable rubber caps to protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick-release adjuster enables variable extension to a maximum length of 88 cm, facilitating flexible microphone placement. The smooth yet robust height adjustment grip and screw knobs of the MS 4322 are made from highly durable ABS with a non-slip, soft-touch thermoplastic coating for comfortable use. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

An additional set of black coding rings is included with the MS 4322; more ring packs are available in a wide array of colours for instant personalisation.

Pris 519,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod Base and 2-Point Adjustment Boom
search

Gravity Microphone Stand...

MS 4321 B

The MS 4321 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

The boom hub features precision 2-point tilt and position adjustment of the 79 cm boom arm. For easy height adjustment the MS 4321 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4321 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 489,00 kr.

På fjernlager

Gravity Cab Clamp Microphone Holder for Guitar Cabinets
search

Gravity Cab Clamp...

MS CAB CL 01

This universal clamping system allows you to mic up a guitar cabinet in an easy and revolutionary way. The spring-loaded clamping arm makes the clamp suitable for almost any type of cabinet and securely fastens to the side or top of a cabinet or combo amplifier. Thanks to its adjustable edge grip, the clamp can be adjusted to fit snugly onto recessed edges. The rigid boom is finely adjustable in both boom angle and microphone depth _ this ensures a far more precise and secure mic placement as opposed to using a gooseneck-based clamping system or conventional mic stand.

Pris 409,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base and One-Hand Clutch
search

Gravity Microphone Stand...

MS 231 HB

The GMS 231 HB is a premium-quality microphone stand with thick walled tubing, black powder-coated finish and 175 cm maximum height. The exceptionally stable round base is made of heavy-duty cast iron, while a rubber ring on the bottom ensures acoustic isolation and surface protection.

The GMS 231 HB features a new and especially convenient single-handed height adjustment function fitted with a non-slip ergonomic handle that makes it very easy to use at all times. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

VARIWEIGHT® compatible _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

An additional set of black coding rings is included with the GMS 231 HB; more ring packs are available in a wide array of colours for clear personalization. For increased stability, a 2.3 kg weight disc is available as an accessory (article no. GWS2WP) that is easy to assemble without tools.

Pris 519,00 kr.

På fjernlager

Gravity Cab Clamp - Mic Holder for Guitar Cabs
search

Gravity Cab Clamp - Mic...

MS CAB CL 01 S

This universal clamping system allows you to mic up a guitar cabinet in an easy and revolutionary way. The spring-loaded clamping arm makes the clamp suitable for almost any type of cabinet and securely fastens to the side or top of a cabinet or combo amplifier. Thanks to its adjustable edge grip, the clamp can be adjusted to fit snugly onto recessed edges. The rigid boom is finely adjustable in both boom angle and microphone depth _ this ensures a far more precise and secure mic placement as opposed to using a gooseneck-based clamping system or conventional mic stand.

Pris 409,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base and 2-Point Adjustment Boom
search

Gravity Microphone Stand...

MS 2321 B

The MS 2321 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 168 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features convenient 1-point tilt and position adjustment of the 79 cm boom arm. For easy height adjustment the MS 2321 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 2321 B, additional ring packs are available in a wide array of colours for instant personalization.

Pris 529,00 kr.

På fjernlager

Gravity Microphone Stand with XLR Connector and Gooseneck
  • På tilbud!
  • -90,00 kr.
search

Gravity Microphone Stand...

MS 23 XLR B

Enabling ultra flexible microphone orientation, this premium quality stand features a 36.5 cm gooseneck on a thick walled 114.5 cm tube and a heavy duty round base made of cast iron.

The gooseneck integrates a 3-pin female XLR connector for directly attaching a microphone while the tube sports a lateral XLR mic cable connector at the bottom end. This permits quick, clean setup without mic clips and running the cable up the stand.

To extend the stand's height and increase stability, additional XLR goosenecks and a weight disc are available as accessories.

Pris 699,00 kr. Normalpris 789,00 kr.

På fjernlager

Table Microphone Arm with Built-In XLR Cable
  • På tilbud!
  • -40,00 kr.
search

Table Microphone Arm with...

S TBA 01

No matter if you're a podcaster, content creator, or home producer looking to equip your creative workspace with a microphone arm and keep your cables tidy and out of the way, the Adam Hall Stands S TBA 01 is just what you need.

The freely movable and robust microphone arm can be easily attached to any tabletop using the supplied table clamp.

Cables won't get tangled up thanks to the 3 m XLR microphone cable that's integrated inside the arm.

The Adam Hall Stands S TBA 01 microphone arm is perfect for your home studio or multimedia workstation.

Pris 279,00 kr. Normalpris 319,00 kr.

På fjernlager

Microphone Stand with Boom Arm
  • På tilbud!
  • -30,00 kr.
search

Microphone Stand with Boom Arm

S 6 B

Microphone stand black

  • telescopic boom arm
  • plastic-covered metal base with folding legs
Pris 309,00 kr. Normalpris 339,00 kr.

På fjernlager

Tripod Microphone Stand with Boom Arm and Locking Leg
  • På tilbud!
  • -30,00 kr.
search

Tripod Microphone Stand...

S 10 B

This microphone boom stand is made of hardwearing steel tubing with black powder coating finish. It features a durable tripod base with locking leg that eliminates the need for a set screw. Folding the locking leg halfway allows you to slide the leg collar up and down the shaft, folding it to the upper or lower stop locks the collar in place for quick setup or compact transport.

Pris 249,00 kr. Normalpris 279,00 kr.

På fjernlager

Gravity Short Microphone Stand with Folding Tripod Base and 2-Point Adjustment Telescoping Boom
search

Gravity Short Microphone...

MS 4222 B

The MS 4222 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The folding tripod base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4222 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4222 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 469,00 kr.

På fjernlager

Gravity 2-Point Adjustment Telescoping Boom Arm
search

Gravity 2-Point Adjustment...

MS B 22

This telescoping boom arm features a cast aluminium hub with precision 2-point tilt and position adjustment and 3/8" male thread.

The ergonomic set screw knobs are made from high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation.

A convenient quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement.

Pris 239,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod and One-Hand Clutch
search

Gravity Microphone Stand...

MS 431 HB

The GMS 431 HB is a premium quality microphone stand with thick walled tubing, powder coated finish and 179 cm maximum height. The heavy duty tripod base is made of die-cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

The GMS 431 HB sports a slim, innovative clutch for convenient one-handed height adjustment. The ergonomic design and soft touch surface of the clutch handle provide a secure grip in all situations. The custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the GMS 431 HB, additional ring packs are available in a wide array of colors for instant personalization.

Pris 469,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod Base and 2-Point Adjustment Telescoping Boom
search

Gravity Microphone Stand...

MS 4322 B

The MS 4322 is a premium microphone stand which features heavy-duty construction, powder coating and a maximum height of 169 cm. The extremely stable base features a zinc die-cast bell and generously proportioned, precision-folding steel legs with durable rubber caps to protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick-release adjuster enables variable extension to a maximum length of 88 cm, facilitating flexible microphone placement. The smooth yet robust height adjustment grip and screw knobs of the MS 4322 are made from highly durable ABS with a non-slip, soft-touch thermoplastic coating for comfortable use. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

An additional set of black coding rings is included with the MS 4322; more ring packs are available in a wide array of colours for instant personalisation.

Pris 509,00 kr.

På lager

Gravity Short Microphone Stand with Round Base and 2-Point Adjustment Telescoping Boom
search

Gravity Short Microphone...

MS 2222 B

The MS 2222 B is a premium-quality microphone stand with thick walled tubing, black powder-coated finish and 73 cm maximum height. The exceptionally stable round base, made of cast iron, is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The position and angle of the boom is precisely adjusted with 2 tensioning knobs on the bracket. A quick fastener allows for variable extension to a maximum length of 88 cm, facilitating flexible mic placement. For smooth, durable height adjustment, the MS 4222 B_s handle and knobs are made of high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

An additional set of black coding rings is included with the MS 2222 B; more ring packs are available in a wide array of colours for instant personalization.

VARIWEIGHT® compatible _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

Pris 519,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.