. Køb 19" Rack Accessories hos CC ProShop .

19" Rack Accessories

19" Rack Accessories

Aktive filtre

19" Power Strip 1U 8-way with French standard
search

19" Power Strip 1U 8-way...

87478
  • Mountable Power Strip from our 19" PDU range
  • Recessed, illuminated switch
  • 8 sockets rotated 45° with French standard
  • Permanently installed mounting brackets
  • 1.4 m PVC cable with angled Schuko plug
Pris 469,00 kr.

På lager

19" Rack Tray 2U | with pull-out rails
search

19" Rack Tray 2U - with...

87555
  • 19" Rack Tray 2 U with pull out shelf on drawer slides with a depth of 358 mm
  • inner height: 73 mm
  • effective surface (pulled out): 350 mm
Pris 839,00 kr.

På lager

19
  • På tilbud!
  • -40,00 kr.
search

19" 3U ERGO Rack Drawer -...

87403 ERGO

The ERGO is a very affordable rackmount drawer with heavy-duty 1.5 mm steel construction and easy, ergonomic operation. It integrates a recessed pull handle that runs the width of the drawer and a convenient push-to-close, pull-to-open latching mechanism with 1,5 kg pull force. This economy rack drawer has a black semi-gloss powder coating finish and 20 kg load capacity. It features smooth-running full extension ball bearing slides with front disconnect for easy drawer removal.

Pris 599,00 kr. Normalpris 639,00 kr.

På lager

19
  • På tilbud!
  • -90,00 kr.
search

19" 2U Rack Drawer - steel

87402 ECONOMYOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Economy" version of the standard 19" drawer from Adam Hall® with 2/3 extension, on ball bearing slide-in rails.

Pris 799,00 kr. Normalpris 889,00 kr.

På lager

19" U-Shaped Rack Panel 16 Sockets 1U with Tie Bar
search

19" U-Shaped Rack Panel 16...

872225

1 U rack panel with punched holes for 16 universal _D_ type XLR sockets.

  • With integral strain relief
  • Integrated tie bar including 16cable ties
Pris 149,00 kr.

På lager

19" Rack Tray 1U | with pull-out rails
search

19" Rack Tray 1U - with...

87556

19" Rackmount pull-out tray 1 U. Drawer with slides mounted on both sides with.The rack brackets on the front and back are extendable, allowing the unit to be fitted with rear support to racks of varying depths.

  • Mounting depth: Adjustable 360-480 mm
  • Usable surface 412 mm wide, 380 mm deep
Pris 709,00 kr.

På lager

19
  • På tilbud!
  • -30,00 kr.
search

19" 2U ERGO Rack Drawer -...

87402 ALU ERGO

If you want to keep your rack tidy by storing accessories and cables conveniently and safely, ERGO has a sturdy rack drawer for tough everyday travel. The 1.5 mm aluminium rack drawer runs smoothly on ball bearing mounted telescopic rails and can be fully pulled out or completely removed.

The recessed handle lets you push and pull the drawer, and the drawer locks securely into place when closed.

Pris 799,00 kr. Normalpris 829,00 kr.

På lager

19
  • På tilbud!
  • -10,00 kr.
search

19" Power Strip 1U 8-way...

87471 C20

Professional and stable 8-way socket strip in 19" format with 1 U. Perfectly suited for installation in racks and the associated power distribution of devices. For a maximum current of 16 A in connection with an IEC cable, there is the IEC C20 connection, which is installed here. The mains cable with IEC C19 on angled Schuko connection and 2 m length is included. The power distributor has an on/off switch at the front and the sockets at the rear are rotated by 45°.

Pris 609,00 kr. Normalpris 619,00 kr.

På lager

19" Front Panel with Plexiglass Insert 1 U
search

19" Front Panel with...

87441
  • 19" Cover with plexiglass front for protecting settings on effects units, etc
Pris 219,00 kr.

På lager

19" Rack Tray 1U
search

19" Rack Tray 1U

8754

If you want to install devices in the rack that do not correspond to the standard 19" dimensions, here is the right tray for you. The universal hole pattern is suitable for mounting many different devices.

Pris 249,00 kr.

På lager

19" Rack Tray 2U | 375 mm depth
search

19" Rack Tray 2U - 375 mm...

87552

19" Rack Tray extra deep for mounting non standard equipment with a depth of up to 375 mm

  • Rear edge is folded up 10 mm for extra stability
  • Internal width: 435mm
  • Ventilation slots in sides
Pris 309,00 kr.

På lager

LD Systems 19" Antenna Rackmount Kit with 2 BNC Connectors
search

LD Systems 19" Antenna...

ANT RK 2

If you are a musician or technician who uses wireless systems or in-ear monitoring systems and want to place the transmitter in a rack, the LD ANT RK antenna rack mount gives you several advantages.

The system enables you to position the antennas optimally outside the rack, thereby improving the wireless signal reception or transmission quality. The antennas are well-housed and protected, and the cables are neatly concealed inside the rack.

So now, there is nothing standing in the way of a successful wireless event experience.

Pris 439,00 kr.

På fjernlager

Tool for Installing and removing Cage Nuts
search

Tool for Installing and...

565 XTOOL

This tool is an indispensable aid for technicians and installers who want to install or remove captive nuts, such as in 19" (48 cm) rack rails. Designed for easy use, it reduces the risk of injury in comparison to using a screwdriver or other tool. Using the pliers also helps avoid damage to the rack or installation parts.

Pris 119,00 kr.

På fjernlager

LD Systems 19" Antenna Rackmount Kit with 4 BNC Connectors
search

LD Systems 19" Antenna...

ANT RK 4

If you are a musician or technician who uses wireless systems or in-ear monitoring systems and want to place the transmitter in a rack, the LD ANT RK antenna rack mount gives you several advantages.

The system enables you to position the antennas optimally outside the rack, thereby improving the wireless signal reception or transmission quality. The antennas are well-housed and protected, and the cables are neatly concealed inside the rack.

So now, there is nothing standing in the way of a successful wireless event experience.

Pris 599,00 kr.

På fjernlager

3-Digit Combination Lock for Rack Drawers
search

3-Digit Combination Lock...

1643

Quickly installed and secured: This high-quality zinc alloy combination lock can be installed in the standard 19 mm sections of conventional rack drawers in a few easy steps. Anyone who doesn_t have a section can have one cut.

This combination lock adds an extra benefit: On the one hand, it_s easy to use, quick to install and protects your personal papers. On the other, it saves you the bother of keeping track of the (right) key. Simply set the desired combination in just a few seconds and protect valuables stored in rack drawers and lockers from unauthorised access.

Pris 129,00 kr.

På fjernlager

Nonslip Drawer Liner
search

Nonslip Drawer Liner

87 INLAY

This nonslip drawer liner provides a gripping, cushioning surface to prevent your tools and gear from sliding and scratching. It is also perfect for rack cradles, shelves, tool boxes and can easily be cut to size.

Pris 39,00 kr.

På fjernlager

LD Systems Rackmount Kit for U500 Receiver
search

LD Systems Rackmount Kit...

U500 RK

This kit allows mounting a half-rack U500 Receiver into a standard 19_ rack. It comes with two BNC cables and two BNC adapters to front-mount the antennas for improved reception.

Pris 469,00 kr.

På fjernlager

2U Headphones Holder
search

2U Headphones Holder

87530
  • swivels flat against rack for transport or can be removed entirely
  • Also useful for patch cords, etc.
  • with soft PVC covering
Pris 129,00 kr.

På fjernlager

Rack Stand 6 U
search

Rack Stand 6 U

STRS 6 U
  • Rack stand 6 units high
  • Black finish, drilled tapped for M5 screws
  • 12 screws included
Pris 129,00 kr.

På fjernlager

Rack Stand 12 U
  • På tilbud!
  • -20,00 kr.
search

Rack Stand 12 U

STRS 12 U

  • Rack stand 12 units high
  • Black finish, drilled tapped for M5 screws
  • 24 screws included
Pris 159,00 kr. Normalpris 179,00 kr.

På fjernlager

19" Power Strip 1U 6-way with 3 power circuits
search

19" Power Strip 1U 6-way...

87473
  • Mountable Power Strip from our 19" PDU range
  • With 3 separate power circuits
  • 3 x 2 Schuko sockets rotated 45°
  • With 2-way adjustable mounting brackets
  • 2 m PVC cable with CEE 16A plug / 400 V per phase
Pris 1.399,00 kr.

På fjernlager

19" Power Strip 1U 10-way with C13 cold device sockets
search

19" Power Strip 1U 10-way...

87471 IEC

This 1 U rackmount power strip provides ten IEC C13 grounded outlets on the rear of a 19" aluminum enclosure. The front panel features a C14 male inlet, an illuminated master on/off switch and a resettable circuit breaker for overload protection.

Pris 919,00 kr.

På fjernlager

19" Power Strip 1U 7-way with switch & protection cap
search

19" Power Strip 1U 7-way...

87471 X7

The practical solution for your 19" rack. Our 87471 X7 with 8-way adjustable stable mounting ears and 7 Schuko sockets comes with a protective cap for the switch. This prevents the power distributor from being switched off accidentally. The cable routing on the side is supplied with a PVC cable (H05VV-F) with 3 x 1.5 mm² inner conductor and an angled Schuko plug.

Pris 349,00 kr.

På fjernlager

19" Power Strip 2U 9-way with 2 switches
search

19" Power Strip 2U 9-way...

87472
  • Mountable Power Strip from our 19" PDU range
  • With two illuminated switches for front and rear
  • 3 Schuko sockets with cover at the front and 8 45° rotated sockets at the rear
  • Permanently installed mounting brackets
  • With 3 m PVC cable and angled Schuko plug
Pris 1.029,00 kr.

På fjernlager

19" Power Strip 2U 3 phases § 32A CEE
search

19" Power Strip 2U 3 phases...

87480

These power distributors are cost-optimised powerhouses. Designed for everyday stage use, they provide a basic supply of conventional electricity requirements. The components have been selected based upon their fulfilment of the relevant safety requirements and a favourable price/performance ratio.

  • 3 x indicator lamps for phase control L1, L2, L3
  • Input via 32 A CEE panel mounted receptacles 5-pin red
  • Output parallel to input 32 A CEE socket 5-pin red
  • Protection via 3 x C16 circuit breakers
  • Front output via 3 x panel mounted receptacles with hinged lids grey
  • Rear output via 6 x panel mounted receptacles with hinged lids grey
  • Quality Made in Germany
Pris 5.529,00 kr.

På fjernlager

19" Power Strip 1U 8-way with switch & 2 x USB
search

19" Power Strip 1U 8-way...

87471 USB

The 87471USB features eight type F grounded Schuko outlets plus two type A USB ports to charge most USB devices. This professional 19" power strip comes in a rugged aluminium housing with permanently attached 2 m power cord, illuminated on/off rocker switch and reversible rackmount angle brackets.

Pris 649,00 kr.

På fjernlager

19" Power Strip 1U 8-way with IP65 power cable
search

19" Power Strip 1U 8-way...

87471 T

The 87471T provides 8 type F grounded outlets on the rear of a 19" aluminum enclosure. The front panel features a black and yellow power twist power inlet and illuminated on/off switch. The 1 U rackmount power strip comes with a 2 m straight CEE 7/7 plug power cord.

Pris 639,00 kr.

På fjernlager

Power Conditioner with rack lighting
search

Power Conditioner with rack...

PCL 10

In addition to providing a central power supply to racks and installations, the 19" AH Power Conditioner with only 1 ns response time offers effective protection against power surges and spikes. High frequency filters ensure a high interference immunity and prevent interference with connected devices. The 8 female power sockets on the back panel are activated with a large rocker switch with integrated status LED; on the front panel, the AH Power Conditioner also has an unswitched power socket and an easily resettable 10 A automatic circuit breaker. The sturdy construction and the rugged 1U steel housing provide you with a reliable and long-lasting operation in mobile and stationary applications.

The AH PCL 10 also has two pull-out rack lights with 5 LEDs, dimmer and automatic on and off switch, as well as a detachable LED gooseneck lamp with USB connection for the lighting of the rack.

All AH power conditioners are supplied with four IEC connection cables.

Pris 1.769,00 kr.

På fjernlager

19" Power Strip 1U 16-way with 2 switches
search

19" Power Strip 1U 16-way...

874716

The 874716 provides 16 type F grounded outlets in a 19" aluminum enclosure with permanently attached 2 m cord and angled CEE 7/7 power plug. The 1 U rackmount power strip features individual illuminating on/off switches for the 8 front and rear outlets each plus overload protection with individual circuit breakers and reset buttons.

Pris 799,00 kr.

På fjernlager

Power Conditioner with voltmeter and ammeter and rack lighting
search

Power Conditioner with...

PCL 10 PRO

In addition to providing a central power supply to racks and installations, the 19" AH Power Conditioner with only 1 ns response time offers effective protection against power surges and spikes. High frequency filters ensure a high interference immunity and prevent interference with connected devices. The 8 female power sockets on the back panel are activated with a large rocker switch with integrated status LED; on the front panel, the AH Power Conditioner also has an unswitched power socket and an easily resettable 10 A automatic circuit breaker. The sturdy construction and the rugged 1U steel housing provide you with a reliable and long-lasting operation in mobile and stationary applications.

The AH PCL 10 PRO has two rack lights, a gooseneck lamp as well as a voltmeter and ammeter with individual, easy-to-read display for monitoring the voltage values and power consumption.

All AH power conditioners are supplied with four IEC connection cables.

Pris 2.689,00 kr.

På fjernlager

Power Conditioner
search

Power Conditioner

PCS 10

In addition to providing a central power supply to racks and installations, the 19" AH Power Conditioner with only 1 ns response time offers effective protection against power surges and spikes. High frequency filters ensure a high interference immunity and prevent interference with connected devices. The 8 female power sockets on the back panel are activated with a large rocker switch with integrated status LED; on the front panel, the AH Power Conditioner also has an unswitched power socket and an easily resettable 10 A automatic circuit breaker. The sturdy construction and the rugged 1U steel housing provide you with a reliable and long-lasting operation in mobile and stationary applications.

All AH power conditioners are supplied with four IEC connection cables.

Pris 1.479,00 kr.

På fjernlager

Tilbage til toppen

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.