. Køb Network & DMX Splitters hos CC ProShop .

Filtrer efter

  • 1.869,00 kr. - 3.889,00 kr.

Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

Network & DMX Splitters

NULL

Network & DMX Splitters

Aktive filtre

Cameo 8-Channel DMX Splitter / Booster (3-pin)
search

Cameo 8-Channel DMX...

SB8.3

The Cameo CLSB83 is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 8 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB83 and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.

The Cameo DMX splitter and booster is also available in 5-pin design (art. No CLSB85).

Pris 1.869,00 kr.

På fjernlager

Cameo 6-Output DMX/RDM Splitter/Booster with 3 and 5-Pin Connectors
search

Cameo 6-Output DMX/RDM...

SB 6 T RDM

Designed for professional applications and supporting bi-directional communication, the Cameo SB 6T RDM is a 6-output DMX/RDM splitter with two inputs and two parallel thru outputs. It sends the incoming DMX/RDM signal to six separate output ports that are electronically and optically isolated. Each output channel has its own driver to boost the DMX/RDM signal to its original level. All inputs and outputs are fitted with both 3-pin and 5-pin Neutrik® connectors for maximum flexibility and reliability. Front and rear panel LEDs indicate the power and DMX status, and three M10 female threaded inserts facilitate truss mounting. The Cameo SB 6T RDM comes with a powerCON power cord.

Pris 3.889,00 kr.

På fjernlager

Cameo 6-Channel DMX Splitter / Booster (3 Pin and 5 Pin)
search

Cameo 6-Channel DMX...

SB 6 DUAL

The Cameo CLSB6D is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 6 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB6D and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.

Pris 1.869,00 kr.

På fjernlager

Tilbage til toppen

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.