. Køb Lighting Stands hos CC ProShop .

Lighting Stands

NULL

Lighting Stands

Aktive filtre

Lighting Stand T-Bar with 28 mm TV Spigot
  • På tilbud!
  • -20,00 kr.
search

Lighting Stand T-Bar with...

SLTS 017 CB

This square T-bar fits onto all lighting stands with 28 mm sockets and is a direct replacement for our AH-Stand SLTS017. It features 4 fixture mounting points and holds up to 45 kg evenly distributed. The 123 cm T-bar comes with a set of matted M8 x 45 mm bolts and wing nuts.

Pris 139,00 kr. Normalpris 159,00 kr.

På lager

Lighting Stand large with TV Spigot Adapter
  • På tilbud!
  • -60,00 kr.
search

Lighting Stand large with...

SLTS 017 E

Lighting Stand large with holding fixture for 28 mm TV Spigot

Pris 579,00 kr. Normalpris 639,00 kr.

På lager

Gravity Lighting Stand with Square Steel Base
  • På tilbud!
  • -200,00 kr.
search

Gravity Lighting Stand with...

LS 331 B

The LS 331 B lighting stand features a large heavy steel base providing a firm footing and a single extension for a maximum height of 2.4 m. The 35 mm pole includes a male threaded M20 insert, the base tube has a female M20 end. Two integrated base handles facilitate transport.

Pris 1.349,00 kr. Normalpris 1.549,00 kr.

På lager

Gravity Super Mini T-Bar for 35 mm Tripods
  • På tilbud!
  • -60,00 kr.
search

Gravity Super Mini T-Bar...

LS SUPER TB 01

If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this, such as the LS 331 B from Gravity. However, if you install a standard T-bar, the combination appears clumsy and oversized. You don't need a clavilux, just two spots.

The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm, it blends seamlessly into any environment, even museums and galleries. Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into position, removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However, despite its slimline elegance, there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two, extra spigot inserts can be installed in the additional mounting holes.

As you are probably already aware, ergonomic locking screws, interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly.

Pris 529,00 kr. Normalpris 589,00 kr.

På lager

Gravity Lighting Stand with T-Bar
  • På tilbud!
  • -110,00 kr.
search

Gravity Lighting Stand with...

LS TBTV 28

The GLSTBTV28 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. The unbreakable height adjustment collars are made of steel for additional strength and feature safety pins to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberized T-Joint _ making the T-Bar not only easier to handle and carry but also look better than regular stands.

Pris 909,00 kr. Normalpris 1.019,00 kr.

På lager

Wind up stand with T-Bar black
  • På tilbud!
  • -290,00 kr.
search

Wind up stand with T-Bar black

SWU 400 T

The SWU400T is an affordable lighting stand that features convenient height adjustment by means of a hand crank. Thanks to its high load bearing capacity of 85 kg, the removable crossbar, and the upper tube with a diameter of 35 mm, the SWU400T is also suitable for use as a speaker stand.

The sturdy steel construction has a black powder-coated finish; the upper tube and extensions are galvanized. A levelling foot ensures secure positioningof the wind up stand even on uneven surfaces. All adjustable elements are secured with spring bolts in addition to the tommy screws. The SWU400T weighs 19.7 kg and is extendable from a minimum height of 190.5 cm to a maximum of 4m.

Pris 2.069,00 kr. Normalpris 2.359,00 kr.

På lager

Lighting Stand large with TV Spigot Adapter
  • På tilbud!
  • -60,00 kr.
search

Lighting Stand large with...

SLTS 017

  • Large lighting stand with crossbar and TV spigot adaptors (length 123 cm).
  • Including set of 4 screws with washer, safety disc and wing nuts
Pris 659,00 kr. Normalpris 719,00 kr.

På lager

Lighting Stand
  • På tilbud!
  • -20,00 kr.
search

Lighting Stand

SLS 6

  • Lightweight lighting stand with crossbeam and 2-stage boom arm
  • Including set of 4 screws with washer, safety disc and wing nuts
Pris 359,00 kr. Normalpris 379,00 kr.

På lager

Lighting Stand T-Bar with 16 mm TV Spigot
  • På tilbud!
  • -15,00 kr.
search

Lighting Stand T-Bar with...

SLS 6 CB

This square T-bar fits onto all lighting stands with 16 mm sockets and is a direct replacement for our AH-Stand SLS6. It features 4 fixture mounting points and holds up to 25 kg evenly distributed. The 92 cm T-bar comes with a set of matted M8 x 45 mm bolts and wing nuts.

Pris 84,00 kr. Normalpris 99,00 kr.

På fjernlager

Floor and Wall Mounting Plate for all PAR16/36/56/64 PAR Spots
  • På tilbud!
  • -15,00 kr.
search

Floor and Wall Mounting...

38163

Floor and wall mounting plate for all PAR16/36/56/64 Flood and Spotlights. Easy to use with bolt and butterfly nut through center mounting hole. Three mounting holes ( Ø 5 mm) to fix the plate to the wall or floor if required. Simple, elegant and inexpensive method for mounting PAR cans!

  • - Including suitable bolt M8 x 35 and butterfly nut
Pris 94,00 kr. Normalpris 109,00 kr.

På fjernlager

Lighting Stand
  • På tilbud!
  • -60,00 kr.
search

Lighting Stand, Medium

SLTS 09

  • Medium lighting stand with crossbeam
  • Including set of 4 screws with washer, safety disc and wing nuts
Pris 459,00 kr. Normalpris 519,00 kr.

På fjernlager

Gravity Floor Stand for Spots
search

Gravity Floor Stand for...

LS FLOORX B

The LS FLOORX B is a compact stand for placing light fixtures on the stage floor. The folding design of powder coated steel with ergonomic locking screw enables space saving storage, hefty rubber feet prevent marring of the floor while providing a secure grip.

Pris 119,00 kr.

På fjernlager

Gravity Universal T-Bar for 35 mm Stands
  • På tilbud!
  • -30,00 kr.
search

Gravity Universal T-Bar for...

LS TB 01

This universal crossbar quickly converts stands with a 35 mm tube diameter into light stands. It is made with light but robust aluminium and is installed quickly and safely using the robust flange with ergonomic adjustment screw.

Pris 199,00 kr. Normalpris 229,00 kr.

På fjernlager

Gravity Lighting Stand with Square Steel Base and Excentric Mounting Option
  • På tilbud!
  • -210,00 kr.
search

Gravity Lighting Stand with...

LS 431 W

The GLS 431 W lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.

Pris 1.669,00 kr. Normalpris 1.879,00 kr.

På fjernlager

Gravity Lighting Stand with T-Bar
search

Gravity Lighting Stand with...

LS TBTV 17

The GLSTBTV17 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity.

The unbreakable height adjustment collars are made of steel for additional strength to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberised T-Joint _ making the T-Bar not only easier to handle and carry but also better looking than regular stands.

Pris 689,00 kr.

På fjernlager

Gravity Clamping Pole VARI®-POLE
search

Gravity Clamping Pole...

LS VARI®-POLE 01 B

Made of lightweight, black anodized aluminium tubing with a secure locking mechanism, the Gravity VARI®-POLE extends from 210 cm to 370 cm and quickly mounts between floors and ceilings. It is held in place by pressure, and strong rubber on both sides for a variety of other applications.

Pris 819,00 kr.

På fjernlager

Gravity Twin Extension Speaker and Lighting Stand
search

Gravity Twin Extension...

SP 5522 B

The SP 5522 B is a classic tripod speaker and lighting stand made from thick walled, yet lightweight powder coated steel tubing with a load capacity of 30 kg and twin extensions for a maximum height of 3 m.

The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. The unbreakable height adjustment collars are made of steel for additional strength featuring safety pins to securely lock the extensions in place.

The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. A set of black coding rings is included with the SP 5522 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 759,00 kr.

På fjernlager

Gravity Touring-Lighting Stand with Square Steel Base
  • På tilbud!
  • -210,00 kr.
search

Gravity Touring-Lighting...

TLS 431 B

Well equipped to handle the daily grind and time constraints of touring: That's the TLS 431 B light stand from the Gravity Touring Series. Its heavy steel base featuring three M20 female threads for off-centre installation guarantees a firm footing in all circumstances, whereas two integrated handles make it easy to transport. In comparison to the standard series, the base is slightly smaller, but it still offers the same amount of stability. The added bonus here is that it can now also be used as a divider in Transflex cases. The base-to-pole connection has been made stronger by adding a reinforcing sleeve to prevent wobbling. With the 35 mm extension tube featuring a M10 female thread, the stand can be extended in height up to 2.40 meters. Thanks to the automatic LockPin® technology, it has never been easier to adjust the height of a stand. Because the pin automatically snaps into the holes when adjusting upwards, a separate locking pin is no longer necessary.

Pris 1.939,00 kr. Normalpris 2.149,00 kr.

På fjernlager

Gravity Lighting Stand with Square Steel Base and Excentric Mounting Option
search

Gravity Lighting Stand with...

LS 431 B

The GLS 431 B lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.

Pris 1.769,00 kr.

På fjernlager

Tilbage til toppen

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.