Defender MIDI 5 2D female...

869300 AE 2F

Midi 5 modular system - female adapter / end piece for connecting / terminating centre section / ramp with mini cable crossover (85200).

1.139,00 kr.

På fjernlager

Defender End Ramp male for...

Micro End Ramp male

End Ramp female for Cable Crossover Defender Micro

469,00 kr.

På fjernlager

Defender End Ramp yellow...

OFFICE ER YEL

End ramp for Defender Office

The 4-channel Defender Office meets all expectations and guidelines for professional cable protection, whether in offices, in your conference room or at your trade fair booth. You can adapt the length of the cable channel, as well as the 90° bend, to your individual needs at any time. For ideal fastening, you can screw down the Defender Office using the pre-drilled holes or glue it in place thanks to the smooth underside.

139,00 kr.

På fjernlager

Defender Cable Protector...

MIDI 4C BLK3 medium-sized cable channels _ 1 large channel for fire hoses

The DEFENDER® MIDI 4C cable protectors has three cable channels measuring 34 x 36 mm plus a wide hose channel (80 x 36 mm), making it the ideal solution if a pressure hose has to run parallel to individual sound, light and/or network cables. With its integrated connectors, flat profile and a capacity of 5 tonnes on an area of 25 x 30 cm (like the DEFENDER® MIDI system), MIDI 4C cable protectors perfect for heavy traffic, construction sites, warehouses, shopping centres, trade shows and exhibitions, as well as carnival and music events.

Label your cable crossovers! All DEFENDER® cable protectors can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Don_t hesitate to contact us.

1.989,00 kr.

På fjernlager

Defender 90° Curve grey for...

OFFICE C GREY

90° curve for Defender Office

The 4-channel Defender Office meets all expectations and guidelines for professional cable protection, whether in offices, in your conference room or at your trade fair booth. You can adapt the length of the cable channel, as well as the 90° bend, to your individual needs at any time. For ideal fastening, you can screw down the Defender Office using the pre-drilled holes or glue it in place thanks to the smooth underside.

149,00 kr.

På fjernlager

Defender Cable Protector...

MIDI 5 LUX

The ultimate solution for protecting your cables and for preventing people from tripping. The innovative cable crossovers in the DEFENDER® LUX Series have highly transparent, yellow-tinted lids in which LED light tubes can be inserted parallel to cables and other pipes. Based on state-of-the-art technology, DEFENDER® LUX cable protectors have been developed in collaboration with event organisers and operators of large halls and festival venues and ensure the highest possible level of safety and visibility in the dark, both indoors and outdoors. For more information, please refer to our price list for DEFENDER® LUX cable crossovers, or contact your DEFENDER® representative directly.

Cable protector, 5-channel

The highly versatile and safe DEFENDER® MIDI cable protector boasts a flat profile, a load capacity of 5 tons over a surface area of 25 x 30 cm, integrated connectors and handles as well as the possibility of combining straight sections, 45° bends and end ramps to accommodate diverse, continuous cable routes. Five 34 x 36 mm cable channels allow safe routing for single sound, light and power cables. DEFENDER® MIDI cable protectors are suitable for a wide range of applications, for example, heavy traffic, construction sites, warehouses, shopping centres, trade shows, exhibitions, carnival and music events as well as broadcasting studios.

DEFENDER® LUX cable protectors can be used with commercially available light tubes. Light tubes with a so-called neon effect are particularly recommended since the individual LEDs are less visible and this provides particularly homogeneous lighting. For outdoor use, please take care to ensure the appropriate IP classification of the light tube. The use of LED strips and other unidirectional light-emitting products or fairy lights is not recommended.

Label your cable crossovers! All DEFENDER® cable protectors can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Don_t hesitate to contact us.

2.229,00 kr.

På fjernlager

Defender Defender 3 2D...

3 2D HVDefender 3 2D modular systems for wheelchair accessibility

To provide optimal wheelchair accessibility, Defender 3 2D is a modular cable protector that is based on our popular Defender 3 cable protector with its three large channels for cables or hoses. It comprises a central section and a flat ramp, which together can be extended and combined as needed, both in length and width. Plus, it's also extremely easy to handle.

Half Middle section

'Barrier-free Accessibility' has become a topic of mounting concern for both public authorities and event organizers over the past few years. With most common cable protector systems, a compromise usually has to be made between wheelchair access and trafficability. But this is not the case with the new Defender 3 2D: each middle section can be equipped with a 6° inclined ramp that can be driven over completely without any problems. The flat incline makes it easy for wheelchair users to roll over the protectors with no trouble at all. They're also so stable that even forklifts and trucks can drive over them.

The system length and width can be expanded, and thus guarantee easy access and safety to areas where three channels are typically not enough, for example, near power generators or FOH areas. Sound, lighting, power cables and hoses can be laid out individually, effortlessly and safely. The middle sections are designed to be symmetrical all the way around to facilitate assembly so that you never have to look for the right attachment piece ever again. As such, no assembly diagrams are required. The symmetrical set-up makes it possible to achieve excellent longitudinal and lateral stability by arranging middle sections and ramps. It also means there are no loose parts which can easily be lost such as adapters and spanners. The connections have been designed to have enough space for easy installation while still providing stability. In case the cable bridges need to be installed without ramps, adapters are available to connect the middle sections with the popular Defender 3 in lengthwise direction.

1.639,00 kr.

På fjernlager

Defender Connector Plugs...

3 CP

Connector plugs are available in pairs.

289,00 kr.

På fjernlager

Defender 45° Curve for...

3 C

Cable Crossover 45 degree curve with connection

1.879,00 kr.

På fjernlager

Defender Cable Protector...

NANO LUX

The ultimate solution for protecting your cables and for preventing people from tripping. The innovative cable crossovers from the Defender LUX Series have highly transparent, yellow-tinted lids, where LED light tubes can be inserted parallel to cables and other pipes. Defender LUX cable crossovers have been developed in collaboration with event organisers and operators of large halls and festival venues according to the latest state-of-the-art technology and also ensure the highest possible level of safety and visibility in the dark, both indoors and outdoors. For more information, please refer to our price list for Defender LUX cable crossovers, or contact your Defender representative directly.

Cable Protector 6 Channels

Defender® NANO cable crossovers are particularly flat and are easy to cross with a wheelchair. They are suitable for a wide range of indoor and outdoor applications and are available with either a yellow or black lid. These cable crossovers boast 6 cable channels for neat, orderly cable routing, T-connectors and a load capacity of 2 tonnes on an area of 20 x 20 cm, and besides pedestrian traffic, they also allow accommodate driving with light-duty vehicles, trolleys and - thanks to their flat profile - even forklift trucks and lift trucks. Separately available end ramps (male/female) ensure safe insertion and removal of cables. Defender NANO cable crossovers can be used in carnival events, trade shows, exhibitions, shopping centres and storage facilities as well as in theatres, studios and TV stations. Not suitable for road traffic.

Defender LUX cable crossovers can be used with commercially available light tubes. Light tubes with a so-called neon effect are especially recommended since the individual LEDs are less visible and this provides for particularly homogeneous lighting. For outdoor use, please mind the appropriate IP classification of the light tube. The use of LED strips and other unidirectional light-emitting products or fairy lights is not recommended.

Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text. Feel free to contact us for more information.

1.239,00 kr.

På fjernlager

Defender Cable Protector...

XXL LUX

The ultimate solution for protecting your cables and for preventing people from tripping. The innovative cable protectors from the Defender LUX Series have highly transparent, yellow-tinted lids, where LED light tubes can be inserted parallel to cables and other pipes. Defender LUX cable crossovers have been developed in collaboration with event organisers and operators of large halls and festival venues according to the latest state-of-the-art technology and also ensure the highest possible level of safety and visibility in the dark, both indoors and outdoors. For more information, please refer to our price list for Defender LUX cable crossovers, or contact your Defender representative directly.

Cable Crossover 5 Channels

Defender® XXL Heavy-Duty crossovers have been developed for extremely high loads and offer 5 large cable/hose channels, three of them for fire-C-hoses (only up to 62 mm diameter - no couplings) and power cables. Integrated connector plugs enable a quick, easy connection of individual elements to build a stable cable protectors line. The separately available end ramps ensure safe insertion and removal of cables. With its capacity of 5 tonnes on an area of 25 x 30 cm, Defender XXL cable crossovers are the ideal solution for heavy vehicle traffic, construction sites, warehouses and trade shows as well as Carnival and music events. Integrated handles for optimum handling. Integrated handles for optimum handling.

Defender LUX cable protectors can be used with commercially available light tubes. Light tubes with a so-called neon effect are especially recommended since the individual LEDs are less visible and this provides for particularly homogeneous lighting. For outdoor use, please mind the appropriate IP classification of the light tube. The use of LED strips and other unidirectional light-emitting products or fairy lights is not recommended.

Label your cable protectors! Customise the Defender cable protectors with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text. Feel free to contact us for more information.

3.569,00 kr.

På fjernlager

Defender Cable Protector...

MINI LUX

The ultimate solution for protecting your cables and for preventing people from tripping. The innovative cable crossovers from the Defender LUX Series have highly transparent, yellow-tinted lids, where LED light tubes can be inserted parallel to cables and other pipes. Defender LUX cable crossovers have been developed in collaboration with event organisers and operators of large halls and festival venues according to the latest state-of-the-art technology and also ensure the highest possible level of safety and visibility in the dark, both indoors and outdoors. For more information, please refer to our price list for Defender LUX cable crossovers, or contact your Defender representative directly.

Cable Crossover 3 Channels

The Defender® MINI cable crossovers are also available with either a black or yellow lid and are suitable for indoor and outdoor use. The flat, compact, 3-channel cable crossover with integrated connection plugs and non-slip base provides optimum support on a wide variety of floors. Separately available end ramps (male/female) ensure safe and orderly insertion and removal of cables. Defender MINI cable crossovers withstand a load of 2 tonnes on an area of 20 x 20 cm and allow crossing for light vehicles, trolleys and pedestrians. Defender MINI cable crossovers can be used in carnival events, trade shows, exhibitions, shopping centres and storage facilities as well as in theatres, studios and TV stations. Not suitable for road traffic.

Defender LUX cable crossovers can be used with commercially available light tubes. Light tubes with a so-called neon effect are especially recommended since the individual LEDs are less visible and this provides for particularly homogeneous lighting. For outdoor use, please mind the appropriate IP classification of the light tube. The use of LED strips and other unidirectional light-emitting products or fairy lights is not recommended.

Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text. Feel free to contact us for more information.

1.609,00 kr.

På fjernlager

Defender 90° Curve for...

OFFICE C

90° curve for Defender Office

The 4-channel Defender Office meets all expectations and guidelines for professional cable protection, whether in offices, in your conference room or at your trade fair booth. You can adapt the length of the cable channel, as well as the 90° bend, to your individual needs at any time. For ideal fastening, you can screw down the Defender Office using the pre-drilled holes or glue it in place thanks to the smooth underside.

149,00 kr.

På fjernlager

Defender End Ramp for 85160...

OFFICE ER

End ramp for Defender Office

The 4-channel Defender Office meets all expectations and guidelines for professional cable protection, whether in offices, in your conference room or at your trade fair booth. You can adapt the length of the cable channel, as well as the 90° bend, to your individual needs at any time. For ideal fastening, you can screw down the Defender Office using the pre-drilled holes or glue it in place thanks to the smooth underside.

139,00 kr.

På fjernlager

Defender XPRESS drop-over...

XPRESS 40 BLK RDEFENDER'S® fastest cable protector!

The XPRESS cable protector can be laid over cables and hoses that have themselves already been laid - this alone makes the laying job unbeatably fast. In addition, the lower weight - due to the lack of a base - also contributes to easier handling.

The DEFENDER® XPRESS cable protector is ideal for indoor and outdoor use at the likes of exhibitions, trade fairs, shopping centres, stages, studios, offices, and more. The cable protector measures 40 x 12 mm, making it suitable for a wide variety of cables and hoses. The dimensions mean that, for example, up to 5 microfon or power cables. With a load capacity of approx. 0.5 tonnes per 20 x 20 cm area, XPRESS cable protectors can support the weight of standard cars, trolleys, bicycles, wheelchairs, and pedestrians.

Our 3D LaserGrip® surface features a special structure and a unique, innovative design that ensures slip and tread resistance. The unbreakable and extremely robust TPU material delivers unmatched stability and durability. In addition, the XPRESS series - like all DEFENDER® cable protection systems - is particularly user-friendly and 100% "made in Germany"

499,00 kr.

På fjernlager

Defender Cable Protector...

MICRO 2 LUX

The ultimate solution for protecting cables and avoiding trip hazards. The innovative cable bridges of the Defender LUX series have highly transparent, yellow-tinted covers in which LED light tubes can be laid parallel to cables and other lines. Defender LUX cable bridges were developed in collaboration with eventwith event organisers and operators of large halls and festival grounds and guarantee the highest possible safety and visibility, even in the dark. safety and visibility in the dark, both indoors and outdoors. For more information, see our price list for Defender LUX cable bridges, or contact your Defender representative directly.

With a load capacity of 2 tonnes per 20 x 20 cm area, MICRO cable bridges support smaller trucks, vehicles, trolleys, bicycles, wheelchairs and pedestrians. The LaserGrip® surface with its special structure and unique design ensures special slip and tread resistance. Extremely break-proof TPU material ensures the durability of the robust cable bridge.

Even greater safety thanks to the new 3D LaserGrip® surface

The innovative design of the 3D LaserGrip® surface significantly increases tread and slip resistance. Due to the special shape and surface structure, the risk of moving an entire line of Defender® MICRO cable protectors is significantly reduced - even when driven over by heavy vehicles.

Label your cable protectors! All Defender cable protectors can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Feel free to get in touch with us.

1.289,00 kr.

På fjernlager

Defender XPRESS drop-over...

XPRESS 100 YELDEFENDER'S® fastest cable protector!

The XPRESS cable protector can be laid over cables and hoses that have themselves already been laid - this alone makes the laying job unbeatably fast. In addition, the lower weight - due to the lack of a base - also contributes to easier handling.

The DEFENDER® XPRESS cable protector is ideal for indoor and outdoor use at the likes of exhibitions, trade fairs, shopping centres, stages, studios, offices, and more. The cable protector measures 100 x 30 mm, making it suitable for a wide variety of cables and hoses. The dimensions mean that, for example, up to 30 microfon or power cables, or up to five garden hoses can be protected. With a load capacity of approx. 0.5 tonnes per 20 x 20 cm area, XPRESS cable protectors can support the weight of standard cars, trolleys, bicycles, wheelchairs, and pedestrians.

Our 3D LaserGrip® surface features a special structure and a unique, innovative design that ensures slip and tread resistance. The unbreakable and extremely robust TPU material delivers unmatched stability and durability. In addition, the XPRESS series - like all DEFENDER® cable protection systems - is particularly user-friendly and 100% "made in Germany"

929,00 kr.

På fjernlager

Defender Short ramp for the...

MIDI 5 2D RS

The DEFENDER® 2D modular cable protectors have been developed with focus on optimum accessibility, on the basis of our popular cable protector DEFENDER® MIDI. The modular system consists of a middle section and a wheelchair accessible ramp, compatible with the DEFENDER® MIDI series, as well as a short ramp and middle section. The system can be extended and combined as required, both in length and in width. Extremely easy handling.

639,00 kr.

På fjernlager

Defender End Ramp for 85300...

Midi ER

End ramp for Defender MIDI

759,00 kr.

På fjernlager

Defender End Ramp for 85002...

3 ER

End ramp for cable outlet reduces the risk of tripping.

939,00 kr.

På fjernlager

Defender Cable Protector...

3 LUX

The ultimate solution for protecting your cables and for preventing people from tripping. The innovative cable protctors from the Defender LUX Series have highly transparent, yellow-tinted lids, where LED light tubes can be inserted parallel tocables and other pipes. Defender LUX cable protectors have been developed in collaboration with event organisers and operators of large halls and festival venues according to the latest state-of-the-art technology and also ensure the highest possiblelevel of safety and visibility in the dark, both indoors and outdoors. For more information, please refer to our price list for Defender LUX cable crossovers, or contact your Defender representative directly.

3 Big Channels - Most Popular

Featuring a 73 mm profile, 45° curve and end ramps with detachable dovetail connectors the Defender® 3 cable protection system provides versatile cable routing and safe crossing for vehicles and pedestrians. With 3 medium large channels, built-in handles for easy portability and a 5 t per 25 x 30 cm load capacity the 73 mm profile Defender® 3 cable protectors are the perfect all-round choice for a wide variety of applications including heavy wheeled traffic, construction sites, warehouses, carnivals, fairs, trade shows, exhibitions, shopping malls and music events.

Defender LUX cable protectors can be used with commercially available light tubes. Light tubes with a so-called neon effect are especially recommended since the individual LEDs are less visible and this provides for particularly homogeneous lighting.For outdoor use, please mind the appropriate IP classification of the light tube. The use of LED strips and other unidirectional light-emitting products or fairy lights is not recommended.

Label your cable protectors! Customise the Defender cable protectors with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text. Feel free to contact us for more information.

3.279,00 kr.

På fjernlager

Defender XPRESS drop-over...

XPRESS 40 YELDEFENDER'S® fastest cable protector!

The XPRESS cable protector can be laid over cables and hoses that have themselves already been laid - this alone makes the laying job unbeatably fast. In addition, the lower weight - due to the lack of a base - also contributes to easier handling.

The DEFENDER® XPRESS cable protector is ideal for indoor and outdoor use at the likes of exhibitions, trade fairs, shopping centres, stages, studios, offices, and more. The cable protector measures 40 x 12 mm, making it suitable for a wide variety of cables and hoses. The dimensions mean that, for example, up to 5 microfon or power cables. With a load capacity of approx. 0.5 tonnes per 20 x 20 cm area, XPRESS cable protectors can support the weight of standard cars, trolleys, bicycles, wheelchairs, and pedestrians.

Our 3D LaserGrip® surface features a special structure and a unique, innovative design that ensures slip and tread resistance. The unbreakable and extremely robust TPU material delivers unmatched stability and durability. In addition, the XPRESS series - like all DEFENDER® cable protection systems - is particularly user-friendly and 100% "made in Germany"

569,00 kr.

På fjernlager

Defender Midi 5 2D Blu...

MIDI 5 2D BLU HVDEFENDER® MIDI 5 2D blue modular systems for wheelchair accessibility

For optimal wheelchair accessibility, the modular cable protector DEFENDER® 2D HV blue was developed on the basis of our popular DEFENDER® MIDI cable protector. The modular system comprises a MIDI-compatible middle section and a flat ramp, which can be expanded and combined as needed, both in terms of length and width. Plus, it's also extremely easy to handle.

Middle section blue half version

'Accessibility' has become a topic of mounting concern for both public authorities and event organizers over the past few years. With most common cable protector systems, a compromise usually has to be made between wheelchair access and trafficability. But this is not the case with the new DEFENDER® 2D HV : each middle section can be equipped with a 6° inclined, wheelchair ramp that can be driven over completely without any problems. The flat incline makes it easy for wheelchair users to roll over the protectors with no trouble at all. They're also so stable that even forklifts and trucks can drive over them.

The system length and width can be expanded, and thus guarantee easy access and safety to areas where five channels are typically not enough, for example, near power generators or FOH areas. Sound, lighting and mains cables can be laid out individually, effortlessly and safely. The middle sections are designed to be symmetrical all the way around to facilitate assembly so that you never have to look for the right attachment piece ever again. As such no assembly diagrams are required. The symmetrical set-up makes it possible to achieve excellent longitudinal and lateral stability by arranging middle sections and ramps. It also means there are no loose parts which can easily be lost such as adapters and spanners. The connections were engineered to provide enough room to play around for simple assembly but also to offer a sufficient level of stability. Adapters for joining middle sections longitudinally are also available should the cable protectors need be installed without ramps.

1.279,00 kr.

På fjernlager

Defender XPRESS drop-over...

XPRESS 100 BLKDEFENDER'S fastest cable protector!

The XPRESS cable protector can be laid over cables and hoses that have themselves already been laid - this alone makes the laying job unbeatably fast. In addition, the lower weight - due to the lack of a base - also contributes to easier handling.

The DEFENDER® XPRESS cable protector is ideal for indoor and outdoor use at the likes of exhibitions, trade fairs, shopping centres, stages, studios, offices, and more. The cable protector measures 100 x 30 mm, making it suitable for a wide variety of cables and hoses. The dimensions mean that, for example, up to 30 microfon or power cables, or up to five garden hoses can be protected. With a load capacity of approx. 0.5 tonnes per 20 x 20 cm area, XPRESS cable protectors can support the weight of standard cars, trolleys, bicycles, wheelchairs, and pedestrians.

Our 3D LaserGrip® surface features a special structure and a unique, innovative design that ensures slip and tread resistance. The unbreakable and extremely robust TPU material delivers unmatched stability and durability. In addition, the XPRESS series - like all DEFENDER® cable protection systems - is particularly user-friendly and 100% "made in Germany"

869,00 kr.

På fjernlager

Defender 45° Curve for...

MIDI C

45° curve for Defender MIDI

1.829,00 kr.

På fjernlager

Defender Cable Bridge 5...

MIDI 5 BLK5 Medium Channels - The Solution for Nearly Anything

The DEFENDER® MIDI cable protection system has been designed for maximum routing versatility and secure crossing. Featuring a low profile, 5 t per 25 x 30 cm load capacity, integrated connectors and handles the straight ramp, 45° curve and end ramps are easily linked to form a continuous cable guard while five 34 x 36 mm channels allow for individual sound, lighting and power line arrangement. DEFENDER® MIDI cable protectors are ideal for a multitude of usages such as heavy wheeled traffic, construction sites, warehouses, carnivals, fairs, trade shows, exhibitions, shopping malls, broadcasting and music events.

Label your cable protectors! Customise the DEFENDER® cable protectors with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text. Feel free to contact us for more information.

2.169,00 kr.

På fjernlager

Defender MIDI 5 2D...

869300 AE M

Midi 5 modular system - adapter/end piece male for connecting/terminating the middle section/ramp with Midi cable bridge (85300/301) or Midi 5 2D set

1.349,00 kr.

På fjernlager

Defender Cable Protector...

MICRO 2 BLK

The compact Defender® MICRO cable protector is ideally suited to indoor and outdoor use such as at exhibitions and trade fairs and in shopping centres, stages or studios. It has two 35 x 30 mm cable guides for high-power cables and water hoses. With a maximum load capacity of 2 tons per 20 x 20 cm area, MICRO cable protectors are able to withstand vehicles, trolleys and pedestrians. Their high level of tread and slip resistance is derived from the LaserGrip® surface with its special structure and unique design. Extremely breakage-resistant TPU material ensures the durability of the robust cable protector.

Even greater safety thanks to the new 3D LaserGrip® surface

The innovative design of the 3D LaserGrip® surface significantly increases tread and slip resistance. Due to the special shape and surface structure, the risk of moving an entire line of Defender® MICRO cable protectors is significantly reduced - even when driven over by heavy vehicles.

Label your cable protectors! All Defender cable protectors can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Feel free to get in touch with us.

1.109,00 kr.

På fjernlager

Defender Cable Duct...

OFFICE YEL4 Mini Channels - Indoor & Design Solution

Available with a choice of black, grey and yellow colors the Defender® OFFICE cable protection system is the elegant solution for secure pedestrian traffic in conference facilities, exhibitions, public buildings, retail outlets, shopping malls, trade shows and offices. Featuring straight, 90° and end ramps with cutting guides for length adjustment, zigzag connection and bolt holes for ground fixing the Defender® OFFICE system provides versatile cable routing while preventing tripping hazards.

389,00 kr.

På fjernlager

Defender Midi 5 2D set blue...

MIDI 5 2D SET BLUBlue DEFENDER® 2D M Set, modular system, wheelchair friendly.

For optimal wheelchair accessibility, the modular cable protector DEFENDER® 2D M Blue was developed on the basis of our popular DEFENDER® MIDI cable protector. It consists of a blue middle section that is compatible with the MIDI and two flat blue ramps that can be combined and extended as required, both in length and width. Plus, it's also extremely easy to handle.

DEFENDER® MIDI 5 2D Set with a blue cover 'Barrier-free accessibility' has become a topic of mounting concern for both public authorities and event organisers over the past few years. Conventional cable protector systems often mean having to make a compromise between accessibility and passability. But this is not the case with the new Blue DEFENDER® 2D M: each middle section can be equipped with two 6° inclined ramps that can be driven over completely without any problems. The flat incline makes it easy for wheelchair users to roll over the protectors with no trouble at all. They're also so stable that even forklifts and lorries can drive over them. Easy access and safety to areas where five channels are typically not enough, for example, near power generators or FOH areas, are thus also guaranteed. Sound, lighting and power cables can be laid out individually, effortlessly and safely. The middle sections are designed to be symmetrical all the way around to facilitate assembly so that you never have to look for the right attachment piece ever again. As such, no detailed assembly diagrams are required. The connections have been designed to have enough space for easy installation.

7.109,00 kr.

På fjernlager

Defender XPRESS drop-over...

XPRESS 40 BLKDEFENDER'S® fastest cable protector!

The XPRESS cable protector can be laid over cables and hoses that have themselves already been laid - this alone makes the laying job unbeatably fast. In addition, the lower weight - due to the lack of a base - also contributes to easier handling.

The DEFENDER® XPRESS cable protector is ideal for indoor and outdoor use at the likes of exhibitions, trade fairs, shopping centres, stages, studios, offices, and more. The cable protector measures 40 x 12 mm, making it suitable for a wide variety of cables and hoses. The dimensions mean that, for example, up to 5 microfon or power cables. With a load capacity of approx. 0.5 tonnes per 20 x 20 cm area, XPRESS cable protectors can support the weight of standard cars, trolleys, bicycles, wheelchairs, and pedestrians.

Our 3D LaserGrip® surface features a special structure and a unique, innovative design that ensures slip and tread resistance. The unbreakable and extremely robust TPU material delivers unmatched stability and durability. In addition, the XPRESS series - like all DEFENDER® cable protection systems - is particularly user-friendly and 100% "made in Germany"

479,00 kr.

På fjernlager

Defender Midi 5 2D module...

MIDI 5 2D BLUDefender 2D M modular systems for wheelchair accessibility

In order to ensure the greatest level of accessibility, the modular DEFENDER® 2DM cable protector was inspired by our popular DEFENDER® MIDI cable protector. The modular system comprises a MIDI-compatible middle section and a flat ramp, which can be expanded and combined as needed, both in terms of length and width. Plus, it's also extremely easy to handle.

Middle section

'Accessibility' has become a topic of mounting concern for both public authorities and event organizers over the past few years. With most common cable protector systems, a compromise usually has to be made between wheelchair access and trafficability. But this is not the case with the new DEFENDER® 2D M: each middle section can be equipped with a 6° inclined, wheelchair ramp that can be driven over completely without any problems. The flat incline makes it easy for wheelchair users to roll over the protectors with no trouble at all. They're also so stable that even forklifts and trucks can drive over them.

The system length and width can be expanded, and thus guarantee easy access and safety to areas where five channels are typically not enough, for example, near power generators or FOH areas. Sound, lighting and mains cables can be laid out individually, effortlessly and safely. The middle sections are designed to be symmetrical all the way around to facilitate assembly so that you never have to look for the right attachment piece ever again. As such no assembly diagrams are required. The symmetrical set-up makes it possible to achieve excellent longitudinal and lateral stability by arranging middle sections and ramps. It also means there are no loose parts which can easily be lost such as adapters and spanners. The connections were engineered to provide enough room to play around for simple assembly but also to offer a sufficient level of stability. Adapters for joining middle sections longitudinally are also available should the cable protectors need be installed without ramps.

2.009,00 kr.

På fjernlager

Defender Midi 5 2D blue...

MIDI 5 2D R BLUDEFENDER® 2D M modular systems for barrier-free accessibility

For optimal wheelchair accessibility, the modular cable protector DEFENDER® 2D M Blue was developed on the basis of our popular DEFENDER® MIDI cable protector. It comprises a MIDI-compatible middle section and a flat ramp, which can be expanded and combined as needed, both in terms of length and width. Plus, it's also extremely easy to handle.

Ramp blue

'Accessibility' has become a topic of mounting concern for both public authorities and event organisers over the past few years. With most common cable protector systems, a compromise usually has to be made between wheelchair access and trafficability. But that's not the case with the new DEFENDER® 2D M: each middle section is equipped with a 6° inclined, wheelchair ramp that can be driven over completely without any problems. The ramp has the same load capacity as the middle section and can accommodate loads of approx. 5 tonnes per 25 x 30 cm. The flat incline makes it much easier for wheelchair users to roll over the protectors since the footrests don't touch the ramp, and forklifts and trucks also have an easy time driving over the cable protectors because of it.

The ramps are designed to be symmetrical all the way around to facilitate assembly so that you never have to look for the right attachment piece ever again. The sections can be used in several directions as there are no right or left elements. As such no assembly diagrams are required. The symmetrical set-up makes it possible to achieve excellent longitudinal and lateral stability by arranging middle sections and ramps. It also means there are no loose parts which can easily be lost such as adapters and spanners.

The connections were engineered to provide enough room to play around for simple assembly but also to offer a sufficient level of stability. To connect ramps lengthwise, for example, there's a small protrusion that snaps into place by pressing down on it from above. Elements don't have to be lifted up again after the cross-connector has been attached. Furthermore, the ramps feature an ergonomic handle to simplify handling, too.

2.559,00 kr.

På fjernlager

Defender Cable Protector...

ULTRA L2 extra-large cable crossovers _ the heavy-duty giant

Defender® Ultra L heavy-duty cable crossovers are designed for the most demanding applications and feature two extra-large cable channels (two channels of 120 x 113 mm plus two channels of 33 x 50 mm) as well as integrated connector plugs for easy coupling of several elements. The load-bearing capacity is approx. 5 tons on a 25 x 30 cm surface area. This makes Ultra L cable crossovers the ideal solution for heavy traffic, construction sites, warehouses, trade shows, carnival and music events, as well as other applications involving particularly heavy use.

Label your cable crossovers! All Defender cable crossovers can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Don_t hesitate to contact us.

3.539,00 kr.

På fjernlager

Defender Cable Duct...

OFFICE GREY4 Mini Channels - Indoor & Design Solution

Available with a choice of black, grey and yellow colors the Defender® OFFICE cable protection system is the elegant solution for secure pedestrian traffic in conference facilities, exhibitions, public buildings, retail outlets, shopping malls, trade shows and offices. Featuring straight, 90° and end ramps with cutting guides for length adjustment, zigzag connection and bolt holes for ground fixing the Defender® OFFICE system provides versatile cable routing while preventing tripping hazards.

369,00 kr.

På fjernlager

Defender Base for 85100...

COMPACT BASEDefender® Compact with Base

Attached to the optional 5-channel base the Defender® COMPACT drop-over cable protector transforms into a heavy-duty guard with high load capacity to support trucks, forklifts and other vehicles. The ribbed surface provides excellent traction while integrated connectors on the base and drop-over facilitate lining up to form a rigid continuous protection system. The range of applications includes construction sites, carnivals, fairs, trade shows, exhibitions, warehouses, shopping malls and music events.

679,00 kr.

På fjernlager

Defender Cable Protector...

COMPACT7 Small Channels - The Drop Over Solution

The Defender® COMPACT drop-over cable protector is a durable light-duty solution to guard cable lines and prevent tripping hazards. Featuring a ribbed surface for excellent traction and integrated dovetail connectors Defender® COMPACT drop-over cable ramps are suitable for pedestrian traffic in offices, shopping malls, conference facilities, trade shows and markets as well as stage and studio applications.

Label your cable crossovers! Customise the Defender cable crossovers with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text. Feel free to contact us for more information.

679,00 kr.

På fjernlager

Defender Cable Protector...

MIDI 4C3 medium-sized cable channels _ 1 large channel for fire hoses

The DEFENDER® MIDI 4C cable protector has three cable channels measuring 34 x 36 mm plus a wide hose channel (80 x 36 mm), making it the ideal solution if a pressure hose has to run parallel to individual sound, light and/or network cables. With its integrated connectors, flat profile and a capacity of 5 tonnes on an area of 25 x 30 cm (like the DEFENDER® MIDI system), MIDI 4C cable protectors are perfect for heavy traffic, construction sites, warehouses, shopping centres, trade shows and exhibitions, as well as carnival and music events.

Label your cable crossovers! All DEFENDER® cable protectors can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Don_t hesitate to contact us.

1.989,00 kr.

På fjernlager

Defender Cable Protector...

NANO BLK6 narrow cable channels _ discreet cable protection for indoor and outdoor use

Defender® NANO cable crossovers are particularly flat and easy to cross with a wheelchair. They are suitable for a wide range of indoor and outdoor applications and are available with either a yellow or black lid. These cable crossovers boast 6 cable channels for neat, orderly cable routing, T-connectors and a load capacity of 2 tonnes on an area of 20 x 20 cm; besides pedestrian traffic, they also take light-duty vehicles, trolleys and _ thanks to their flat profile _ even forklift and pallet trucks. Separately available end ramps (male/female) ensure safe insertion and removal of cables. Defender NANO cable crossovers can be used at carnival events, trade shows, exhibitions, shopping centres and storage facilities as well as in theatres, studios and TV stations. Not suitable for road traffic.

Label your cable crossovers! All Defender cable crossovers can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Don_t hesitate to contact us.

1.109,00 kr.

På fjernlager

Defender Cable Protector...

MICRO 2

The compact Defender® MICRO cable protector is ideally suited to indoor and outdoor use such as at exhibitions and trade fairs and in shopping centres, stages or studios. It has two 35 x 30 mm cable guides for high-power cables and water hoses. With a maximum load capacity of 2 tons per 20 x 20 cm area, MICRO cable protectors are able to withstand vehicles, trolleys and pedestrians. Their high level of tread and slip resistance is derived from the LaserGrip® surface with its special structure and unique design. Extremely breakage-resistant TPU material ensures the durability of the robust cable protector.

Even greater safety thanks to the new 3D LaserGrip® surface

The innovative design of the 3D LaserGrip® surface significantly increases tread and slip resistance. Due to the special shape and surface structure, the risk of moving an entire line of Defender® MICRO cable protectors is significantly reduced - even when driven over by heavy vehicles.

Label your cable protectors! All Defender cable protectors can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Feel free to get in touch with us.

1.109,00 kr.

På fjernlager

Defender Midi 5 2D ramp -...

MIDI 5 2D RDEFENDER® 2D M modular systems for wheelchair accessibility

In order to ensure the greatest level of accessibility, the design of the modular DEFENDER® 2D M cable protector system was inspired by our popular DEFENDER® MIDI cable protector. It comprises a MIDI-compatible middle section and a flat ramp, which can be expanded and combined as needed, both in terms of length and width. Plus, it's also extremely easy to handle.

Ramp

'Accessibility' has become a topic of mounting concern for both public authorities and event organisers over the past few years. With most common cable protector systems, a compromise usually has to be made between wheelchair access and trafficability. But that's not the case with the new DEFENDER® 2D M: each middle section is equipped with a 6° inclined, wheelchair accessible ramp that can be driven over completely without any problems. The ramp has the same load capacity as the middle section and can accommodate loads of approx. 5 tonnes per 25 x 30 cm. The flat incline makes it much easier for wheelchair users to roll over the protectors since the footrests don't touch the ramp, and forklifts and trucks also have an easy time driving over the cable protectors because of it.

The ramps are designed to be symmetrical all the way around to facilitate assembly so that you never have to look for the right attachment piece ever again. The sections can be used in several directions as there are no right or left elements. As such no assembly diagrams are required. The symmetrical set-up makes it possible to achieve excellent longitudinal and lateral stability by arranging middle sections and ramps. It also means there are no loose parts which can easily be lost such as adapters and spanners.

The connections were engineered to provide enough room to play around for simple assembly but also to offer a sufficient level of stability. To connect ramps lengthwise, for example, there's a small protrusion that snaps into place by pressing down on it from above. Elements don't have to be lifted up again after the cross-connector has been attached. Furthermore, the ramps feature an ergonomic handle to simplify handling, too.

1.869,00 kr.

På fjernlager

Defender Cable Protector...

MINI BLK

Small but sturdy. Light, professional and universally useable. The new DEFENDER Mini meets all expectations when it comes to professional cable protection, expanding the DEFENDER series to include a compact, very light (only 5 kg!) cable crossover capable of supporting vehicle traffic.

Sporting three cable channels with a channel cross-section of 35 mm and an installation height of 48 mm, this crossover is mainly used indoors, but with a capacity of more than 2 tonnes it can easily withstand road traffic, too. The base of the DEFENDER Mini has a non-slip surface so as to guarantee optimum support on as many different floor types as possible. Like all of the DEFENDER cable crossovers, the DEFENDER Mini is resistant to oil, acids & petrol and has a patented self-cleaning hinged closure.

Label your cable crossovers! We are now able to customise all Defender cable crossovers with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area.

1.439,00 kr.

På fjernlager

Defender Cable Protector...

NANO6 narrow cable channels _ discreet cable protection for indoor and outdoor use

Defender® NANO cable crossovers are particularly flat and easy to cross with a wheelchair. They are suitable for a wide range of indoor and outdoor applications and are available with either a yellow or black lid. These cable crossovers boast 6 cable channels for neat, orderly cable routing, T-connectors and a load capacity of 2 tonnes on an area of 20 x 20 cm; besides pedestrian traffic, they also take light-duty vehicles, trolleys and _ thanks to their flat profile _ even forklift and pallet trucks. Separately available end ramps (male/female) ensure safe insertion and removal of cables. Defender NANO cable crossovers can be used at carnival events, trade shows, exhibitions, shopping centres and storage facilities as well as in theatres, studios and TV stations. Not suitable for road traffic.

Label your cable crossovers! All Defender cable crossovers can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Don_t hesitate to contact us.

1.109,00 kr.

På fjernlager

Defender Cable Protector...

XXL5 extra-large channels _ the heavy-duty all-rounder

Defender® XXL heavy-duty cable crossovers have been developed for extremely high loads and offer 5 large cable/hose channels, three of them for fire C hoses (only up to 62 mm diameter _ no couplings) and power cables. Integrated connector plugs enable a quick, easy connection of individual elements to build a stable cable crossover line. The separately available end ramps ensure safe insertion and removal of cables. With a capacity of 5 tonnes on an area of 25 x 30 cm, Defender XXL cable protectors are the ideal solution for heavy vehicle traffic, construction sites, warehouses and trade shows, as well as carnival and music events. Integrated handles for optimum handling. Integrated handles for optimum handling.

Label your cable crossovers! All Defender cable protectors can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Don_t hesitate to contact us.

3.179,00 kr.

På fjernlager

Defender Midi 5 2D module...

MIDI 5 2DDEFENDER® 2D M modular systems for wheelchair accessibility

In order to ensure the greatest level of accessibility, the modular DEFENDER® 2D M cable protector was inspired by our popular DEFENDER® MIDI cable protector. The modular system comprises a MIDI-compatible middle section and a flat ramp, which can be expanded and combined as needed, both in terms of length and width. Plus, it's also extremely easy to handle.

Middle section

'Accessibility' has become a topic of mounting concern for both public authorities and event organizers over the past few years. With most common cable protector systems, a compromise usually has to be made between wheelchair accessibility and trafficability. But this is not the case with the new DEFENDER® 2D M: each middle section can be equipped with a 6° inclined, wheelchair accessible ramp that can be driven over completely without any problems. The flat incline makes it easy for wheelchair users to roll over the protectors with no trouble at all. They're also so stable that even forklifts and trucks can drive over them.

The system length and width can be expanded, and thus guarantee easy access and safety to areas where five channels are typically not enough, for example, near power generators or FOH areas. Sound, lighting and mains cables can be laid out individually, effortlessly and safely. The middle sections are designed to be symmetrical all the way around to facilitate assembly so that you never have to look for the right attachment piece ever again. As such no assembly diagrams are required. The symmetrical set-up makes it possible to achieve excellent longitudinal and lateral stability by arranging middle sections and ramps. It also means there are no loose parts which can easily be lost such as adapters and spanners. The connections were engineered to provide enough room to play around for simple assembly but also to offer a sufficient level of stability. Adapters for joining middle sections longitudinally are also available should the cable protectors need be installed without ramps.

1.909,00 kr.

På fjernlager

Defender Cable Duct...

OFFICE4 Mini Channels - Indoor & Design Solution

Available with a choice of black, grey and yellow colors the Defender® OFFICE cable protection system is the elegant solution for secure pedestrian traffic in conference facilities, exhibitions, public buildings, retail outlets, shopping malls, trade shows and offices. Featuring straight, 90° and end ramps with cutting guides for length adjustment, zigzag connection and bolt holes for ground fixing the Defender® OFFICE system provides versatile cable routing while preventing tripping hazards.

379,00 kr.

På fjernlager

Defender Cable Protector...

MIDI 55 Medium Channels - The Solution for Nearly Anything

The DEFENDER® MIDI cable protection system has been designed for maximum routing versatility and secure crossing. Featuring a low profile, 5 t per 25 x 30 cm load capacity, integrated connectors and handles the straight ramp, 45° curve and end ramps are easily linked to form a continuous cable guard while five 34 x 36 mm channels allow for individual sound, lighting and power line arrangement. DEFENDER® MIDI cable protectors are ideal for a multitude of usages such as heavy wheeled traffic, construction sites, warehouses, carnivals, fairs, trade shows, exhibitions, shopping malls, broadcasting and music events.

Label your cable protectors! Customise the DEFENDER® cable protectors with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text. Feel free to contact us for more information.

1.989,00 kr.

På fjernlager

Defender Cable Protector...

33 Big Channels - Most Popular

Featuring a 73 mm profile, 45° curve and end ramps with detachable dovetail connectors the Defender® 3 cable protection system provides versatile cable routing and safe crossing for vehicles and pedestrians. With 3 medium large channels, built-in handles for easy portability and a 5 t per 25 x 30 cm load capacity the 73 mm profile Defender® 3 cable protectors are the perfect all-round choice for a wide variety of applications including heavy wheeled traffic, construction sites, warehouses, carnivals, fairs, trade shows, exhibitions, shopping malls and music events.

Label your cable protector! Customise the Defender cable protector with your company logo for orders ex 30 pieces for each product. You will find the format requirements in the download pool above the text. Feel free to contact us for more information.

2.939,00 kr.

På fjernlager

Defender Cable Protector...

MINI3 small cable channels _ light and robust

The Defender® MINI cable crossovers are also available with either a black or yellow lid and are suitable for indoor and outdoor use. The flat, compact, 3-channel cable crossover with integrated connector plugs and non-slip base provides optimum support on a wide variety of floors. Separately available end ramps (male/female) ensure safe and orderly insertion and removal of cables. Defender MINI cable crossovers withstand a load of 2 tonnes on an area of 20 x 20 cm, so they are suitable for light vehicles, trolleys and pedestrians. Defender MINI cable crossovers can be used at carnival events, trade shows, exhibitions, shopping centres and storage facilities as well as in theatres, studios and TV stations. Not suitable for road traffic.

Label your cable crossovers! All Defender cable crossovers can be customised with your company logo from a minimum order of just 30 units per model. The format requirements are available in the download area. Don_t hesitate to contact us.

1.439,00 kr.

På fjernlager

Hook and Loop Cable Tie 800...

VR 5080 RED

Customise and personalise your cable ties!

You can order Adam Hall cable ties with your individual imprint on the tongue.

Choose between economy printing in black or white and attractive high quality multicolour transfer printing.

We also offer full customisation for larger quantities, e.g. cable ties with your custom dimensions and tongue colours.

Please contact your sales representative or sales@adamhall.com for more information.

389,00 kr.

På fjernlager

Hook and Loop Cable Tie 800...

VR 5080 BLU

Customise and personalise your cable ties!

You can order Adam Hall cable ties with your individual imprint on the tongue.

Choose between economy printing in black or white and attractive high quality multicolour transfer printing.

We also offer full customisation for larger quantities, e.g. cable ties with your custom dimensions and tongue colours.

Please contact your sales representative or sales@adamhall.com for more information.

389,00 kr.

På fjernlager

Cable Ties 360 mm - 100 stk.

VP 48360

VP Cable Ties

Available only in 100 packs per type and colour! Other lenghts and colours on inquiry!

209,00 kr.

På fjernlager

Hook and Loop Cable Tie 500...

VR 5050 RED

Customise and personalise your cable ties!

You can order Adam Hall cable ties with your individual imprint on the tongue.

Choose between economy printing in black or white and attractive high quality multicolour transfer printing.

We also offer full customisation for larger quantities, e.g. cable ties with your custom dimensions and tongue colours.

Please contact your sales representative or sales@adamhall.com for more information.

279,00 kr.

På fjernlager

Back to Back Hook and Loop...

5815

Back-to-Back tape, one side hooks, other side loops.

Good solution to manufacture strong and custom made cable ties, also to be used for many purposes in speaker cabinet and case building.

259,00 kr.

På fjernlager

Cable Ties 165 mm black -...

VP 26135 BLK

VP Cable Ties

Available only in 100 packs per type and colour! Other lenghts and colours on inquiry!

49,00 kr.

På fjernlager

Hook and Loop Cable Tie 160...

VR 1616 GRN

Customise and personalise your cable ties!

You can order Adam Hall cable ties with your individual imprint on the tongue.

Choose between economy printing in black or white and attractive high quality multicolour transfer printing.

We also offer full customisation for larger quantities, e.g. cable ties with your custom dimensions and tongue colours.

Please contact your sales representative or sales@adamhall.com for more information.

79,00 kr.

På fjernlager

Hook and Loop Cable Tie 400...

VR 4040 RED

Customise and personalise your cable ties!

You can order Adam Hall cable ties with your individual imprint on the tongue.

Choose between economy printing in black or white and attractive high quality multicolour transfer printing.

We also offer full customisation for larger quantities, e.g. cable ties with your custom dimensions and tongue colours.

Please contact your sales representative or sales@adamhall.com for more information.

219,00 kr.

På fjernlager

Hook and Loop Cable Tie 500...

VR 5050 BLU

Customise and personalise your cable ties!

You can order Adam Hall cable ties with your individual imprint on the tongue.

Choose between economy printing in black or white and attractive high quality multicolour transfer printing.

We also offer full customisation for larger quantities, e.g. cable ties with your custom dimensions and tongue colours.

Please contact your sales representative or sales@adamhall.com for more information.

279,00 kr.

På fjernlager

Hook and Loop Cable Tie 300...

VR 2530 RED

Customise and personalise your cable ties!

You can order Adam Hall cable ties with your individual imprint on the tongue.

Choose between economy printing in black or white and attractive high quality multicolour transfer printing.

We also offer full customisation for larger quantities, e.g. cable ties with your custom dimensions and tongue colours.

Please contact your sales representative or sales@adamhall.com for more information.

129,00 kr.

På fjernlager

Hook and Loop Cable Tie 200...

VR 2020 GRN

Customise and personalise your cable ties!

You can order Adam Hall cable ties with your individual imprint on the tongue.

Choose between economy printing in black or white and attractive high quality multicolour transfer printing.

We also offer full customisation for larger quantities, e.g. cable ties with your custom dimensions and tongue colours.

Please contact your sales representative or sales@adamhall.com for more information.

99,00 kr.

På fjernlager

AdamHall

AdamHall