
IMG STAGELINE XLR-jack...
- XLR plug to 6.3 mm inline jack, mono
- Length: 15 cm
På lager
.
Ref: CR-2032/6
Rated voltage | 3 V |
Type | button cell |
IEC | CR2032 |
ANSI | - |
Capacity | 210 mAh |
Technology | lithium-manganese dioxide |
Quantity | 6 |
Capacity | - |
Charging current | - |
Charging time | - |
VdS No. | - |
Panasonic No. | - |
Dimensions | Ø 20 mm x 3.2 mm |
Weight | 26 g |
Connections | |
Other features | non-rechargeable |
På lager
Active speaker with integrated Dante® module
System requirements Dante®: Windows 7/8.1/10/11 or MacOS 10.9.5/10.10.5/10.11
The brand Dante® as well as the Dante® software which may have been integrated into these products are licenced by Audinate Pty Ltd.
På lager
På fjernlager
Den nye generation af class D PA-forstærkere fra IMG STAGELINE imponerer med høj effekt og høj energieffektivitet. Andre fordele som lydløs drift og lav vægt gør denne forstærkerserie velegnet til både faste installationer og mobilt brug.
Digital stereo PA-forstærker
SOUNDCHECK 03/2015
"The STA-1000D and STA-2000D provide an unobtrusive sound reproduction of a high quality. No matter whether classical music, rock music or voice reproductions, the power amplifier perfectly meets any requirement."
tools4music 02/2015
"The power amplifiers STA-200D and STA-1000D from IMG Stage Line impress by an elaborated selection and configuration of the inner components. Due to the low weight and the mounting depth of 335 mm only, this series is suitable for both rack mounting and installation into shelves. With these test results, they are also suitable for hi-fi applications. I consider these 'lightweights' to be very well-suited for small to medium-sized entertainment applications, PA applications at conferences and for speech transmissions well as a multi-channel power amplifier for stage monitoring."
+ Operating reliability
+ Weight
+ Test results: low THD, perfect frequency response and S/N ratio
+ Low-maintenance design
+ Protective circuits
+ Very wide operating voltage range
+ Workmanship
+ Efficiency
- No XLR feedthrough connector
På fjernlager
På fjernlager
På fjernlager
Mikrofonstativ, med boom og stødabsorberende fod. Gevind: 16 mm (5/8") og 9 mm (3/8").
På fjernlager
På fjernlager
På fjernlager
Active loop amplifier,
with dynamic compressor for setting up an inductive sound reproduction system in large rooms up to 750 m2.
Inductive transmission of audio signals allows users of hearing aids with a T-coil or inductive receivers, e.g. the LR-202, to receive audio signals. Wireless transmission is an advantage of inductive sound reproduction systems which makes it possible for the user to move freely within the loop.
Inductive sound reproduction systems are used for various applications, e.g. as a hearing aid for the hearing impaired in houses of worship, theatres, cinemas, waiting rooms and lounges, as interpreting systems, for lectures in museums, exhibitions, etc.
With inductive sound reproduction systems, an inductive loop made of a wire winding is laid on the floor, the wall or along the ceiling and is controlled by a constant current amplifier. Thus, a magnetic field is created within the loop which induces a voltage into the T-coil of the hearing aid or into the inductive receiver. In the receivers, this voltage is then converted again into an audio signal.
På fjernlager
På fjernlager
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.