
MONACOR 3´´ højttaler - SP-15
- All-plastic cone with hard suspension
- Moisture-proof
- Special version for signal sounds of alarm systems
- Operating temperature range: -25 °C to +70 °C
På fjernlager
.
Active loop amplifier,
with dynamic compressor for setting up an inductive sound reproduction system in large rooms up to 750 m2.
Inductive transmission of audio signals allows users of hearing aids with a T-coil or inductive receivers, e.g. the LR-202, to receive audio signals. Wireless transmission is an advantage of inductive sound reproduction systems which makes it possible for the user to move freely within the loop.
Inductive sound reproduction systems are used for various applications, e.g. as a hearing aid for the hearing impaired in houses of worship, theatres, cinemas, waiting rooms and lounges, as interpreting systems, for lectures in museums, exhibitions, etc.
With inductive sound reproduction systems, an inductive loop made of a wire winding is laid on the floor, the wall or along the ceiling and is controlled by a constant current amplifier. Thus, a magnetic field is created within the loop which induces a voltage into the T-coil of the hearing aid or into the inductive receiver. In the receivers, this voltage is then converted again into an audio signal.
Ref: LA-402
Loop current | 14 A (peak) |
Loop resistance | 0.2-2 _ |
Room size | up to 750 m2 |
Inputs | mic 1.5 mV/6.8 k_, XLR, bal.
switchable to line 630 mV/10 k_, XLR, bal. line 630 mV/4.7 k_, RCA, unbal. alarm: 2 screw terminals for connecting a switch |
Outputs | Lloop: 2 screw terminals |
Equalizer bass | ±10 dB, 100 Hz |
Equalizer treble | ±10 dB, 10 kHz |
Frequency range | 50-8,000 Hz |
THD | < 1% |
Admiss. ambient temp. | 0-40 °C |
Power supply | _ 230 V/50 Hz/230 VA |
Dimensions | 482 x 88 x 280 mm, 2 RS |
Weight | 6.97 kg |
På fjernlager
På fjernlager
Cat. 6a panel jack
På fjernlager
På fjernlager
På fjernlager
På fjernlager
På lager
På fjernlager
På lager
På lager
På fjernlager
På fjernlager
Mini stereoforstærker, 2 x 30 W, med Bluetooth interface, NFC og fjernbetjening.
På fjernlager
På fjernlager
Protective cover for speaker systems,
for PA speaker system MOVE-10PMK2.
På fjernlager
Strømskinne til montering i rack, med 8 udtag m/jord og beskyttelse mod overspænding.
På fjernlager
Active loop amplifier,
with dynamic compressor for setting up an inductive sound reproduction system in large rooms up to 750 m2.
Inductive transmission of audio signals allows users of hearing aids with a T-coil or inductive receivers, e.g. the LR-202, to receive audio signals. Wireless transmission is an advantage of inductive sound reproduction systems which makes it possible for the user to move freely within the loop.
Inductive sound reproduction systems are used for various applications, e.g. as a hearing aid for the hearing impaired in houses of worship, theatres, cinemas, waiting rooms and lounges, as interpreting systems, for lectures in museums, exhibitions, etc.
With inductive sound reproduction systems, an inductive loop made of a wire winding is laid on the floor, the wall or along the ceiling and is controlled by a constant current amplifier. Thus, a magnetic field is created within the loop which induces a voltage into the T-coil of the hearing aid or into the inductive receiver. In the receivers, this voltage is then converted again into an audio signal.
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.