
BLICKLE Hjul m/bremse -...
- Castor wheels with plain bearing and ball bearing guidance
- All-rubber castor wheels
- Zinc-plated metal parts
På fjernlager
.
Ref: TXA-1020MT
Type | multifrequency transmitter module |
Carrier frequency range | 863.1-864.9 MHz |
Audio frequency range | - |
Channels | 1 |
THD | - |
Dynamic range | - |
RF S/N ratio | - |
Operating time | - |
Admiss. ambient temp. | 0-40 °C |
Power supply | - |
Dimensions | - |
Total weight | - |
Connections | - |
Transmitting power | _ 10 mW |
Operating range | approx. 30 m |
Power supply transmitter | DC current 12 V/140 mA |
Width transmitter | 91 mm |
Height transmitter | 43 mm |
Depth transmitter | 103 mm |
Weight transmitter | 220 g |
Connections transmitter | - |
Audio signal receiver | - |
Power supply receiver | - |
Width receiver | - |
Height receiver | - |
Depth receiver | - |
Weight receiver | - |
Connections receiver | - |
På fjernlager
På fjernlager
Mono class D PA mixing amplifier
På fjernlager
På fjernlager
På fjernlager
Protective cover,
suitable for portable amplifier systems TXA-820, TXA-820CD and TXA-822CD.
Supplied w/o device.
På fjernlager
Frontplade til rack, med ventilation.
RCP-8721U: 1 U, 483 x 44,5 mm
RCP-8722U: 2 U, 483 x 89 mm
På fjernlager
På fjernlager
På fjernlager
På fjernlager
Active loop amplifier,
with dynamic compressor for setting up an inductive sound reproduction system in large rooms up to 750 m2.
Inductive transmission of audio signals allows users of hearing aids with a T-coil or inductive receivers, e.g. the LR-202, to receive audio signals. Wireless transmission is an advantage of inductive sound reproduction systems which makes it possible for the user to move freely within the loop.
Inductive sound reproduction systems are used for various applications, e.g. as a hearing aid for the hearing impaired in houses of worship, theatres, cinemas, waiting rooms and lounges, as interpreting systems, for lectures in museums, exhibitions, etc.
With inductive sound reproduction systems, an inductive loop made of a wire winding is laid on the floor, the wall or along the ceiling and is controlled by a constant current amplifier. Thus, a magnetic field is created within the loop which induces a voltage into the T-coil of the hearing aid or into the inductive receiver. In the receivers, this voltage is then converted again into an audio signal.
På fjernlager
På lager
På fjernlager
På fjernlager
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.