MONACOR Højttalergitter 10´´ - SG-250

177,00 kr.

Inkl. moms

Decorative Speaker Grilles
With fine perforation, 2-part version with fixing ring to be screwed for the speaker and push-on grille, various sizes.

Decorative speaker grilles, two parts, for the most common standard speaker sizes. Mounting rim serves for mounting the speaker; cover rim with metal grille covers speaker and mounting completely.

Antal

På fjernlager

Ref: SG-250

Beskrivelse
Produktoplysninger

Outside Ø	Ø 267 mm
Inside Ø	Ø 232 mm
Total height	25 mm
Height inside	11 mm

Reference SG-250

Specifikke referencer

16 andre varer i den samme kategori:

MONACOR Bordmikrofon - PDM-302

PA-bordmikrofon, med svanehals.

Dynamisk, cardioid karakteristik
Støjsvag tale-/afbryderknap, låsbar/ikke-låsbar
5 m kabel med XLR stik, balanceret

659,00 kr.

På fjernlager

MONACOR Teleslynge...

Active loop amplifier,
with dynamic compressor for setting up an inductive sound reproduction system in large rooms up to 750 m².
Inductive transmission of audio signals allows users of hearing aids with a T-coil or inductive receivers, e.g. the LR-202, to receive audio signals. Wireless transmission is an advantage of inductive sound reproduction systems which makes it possible for the user to move freely within the loop.
Inductive sound reproduction systems are used for various applications, e.g. as a hearing aid for the hearing impaired in houses of worship, theatres, cinemas, waiting rooms and lounges, as interpreting systems, for lectures in museums, exhibitions, etc.
With inductive sound reproduction systems, an inductive loop made of a wire winding is laid on the floor, the wall or along the ceiling and is controlled by a constant current amplifier. Thus, a magnetic field is created within the loop which induces a voltage into the T-coil of the hearing aid or into the inductive receiver. In the receivers, this voltage is then converted again into an audio signal.

Dynamic compressor
Automatic talkover
Metal loss correction 0-3 dB/oct.
3 mic/line inputs with 40 V phantom power, to be switched on additionally
6.3 mm input for inserting external devices
Integrated SD card reader for reproduction of stored alarm messages
2-way tone control
LED level meter
482 mm (19") rack installation with supplied mounting brackets

6.189,00 kr.

På fjernlager

Phono-jack kabel 1.2m - ACA-1635 MONACOR

MONACOR Phono-jack kabel...

Audio adapterkabler

Til forbindelse af lydapparater, fx transportable multimedie-afspillere
1 x 3,5 mm stereo minijack
2 x phonostik

35,00 kr.

På lager

MONACOR Hook-and-loop bånd...

Selvklæbende hook and loop tape
Sort, til universal brug. Også velegnet til at sikre genstande under transport

224,00 kr.

På lager

Feedback destroyer - MFE-212 IMG STAGELINE

IMG STAGELINE Feedback...

Stereo DSP feedback controller

Prevents acoustic feedback appearing in PA systems
12 steep-edged precision notch filters for each stereo channel
Editable filter parameters (supplied with software)
4 factory presets, 16 user presets
Mono operation or 2-channel operation possible
AD/DA resolution: 24 bits
45 dB attenuation (with gradual reduction in variable mode)
Optionally continuous signal monitoring (auto notch) or manual setting of the required filters (manual notch)
Backlit 2 x 20 dot matrix display
Adjustable input level and output level
Bypass function
Clip LED
Balanced inputs and outputs: XLR and 6.3 mm jack
USB port (Type-A)
MIDI input and output
482 mm (19") rack installation, 1 RS

Xound 2014/6
"An interesting tool for live applications which is able to solve various tricky feedback problems. No matter whether for a monitor or for FOH, the controller MFE-212 delivers a great performance. There is no perceivable difference in sound when switching to bypass mode, i.e. the controller provides a clear and precise sound performance."

3.749,00 kr.

På fjernlager

ELA-volumekontrol 12W - ATT-512PEU MONACOR

MONACOR ELA-volumekontrol...

Wall-mounted PA Volume Controls with 24 V Emergency Priority Relay

Attenuation in 10 steps, position 0 is OFF
For 100 V line technique
White plastic front panel and knob
Also suitable for already existing series of switches with standard cover frames (cutout: 50 mm or 55 mm)
Flush mounting into standard 60 mm wall sockets
Screw terminal