. Sliding Latch .
Sliding Latch
search
  • Sliding Latch
  • Sliding Latch

Sliding Latch

99,00 kr.
Inkl. moms
16540Sliding Latch System

This sliding latch system was developed especially for small panels, doors or similar applications. In doing so, we emphasized minimising the installed height of the latch system in order to cover as many areas of application as possible.

Antal
På fjernlager

Ref: 16540

Product typeCatches
TypeSliding Latches
MaterialSteel
Surfacegalvanized
Width82 mm
Height88 mm
Weight0,096 kg
Adam Hall Hardware
16540

Specifikke referencer

5 andre varer i den samme kategori:

Lever Latch
search

Lever Latch, black

16552
  • Lever lock for service flaps, doors and drawers
  • With swing-out handle for opening.
  • Adjustable to wood thicknesses up to 18 mm.
Pris 249,00 kr.

På fjernlager

Lever Latch plastic black
search

Lever Latch plastic black

1656

Recessed lever latch for service door. Black plastic (POM). Mounts into wood thickness from 7-13 mm. Stainless steel screws.

Pris 179,00 kr.

På fjernlager

Compression Latch with Wing Knob
search

Compression Latch with Wing...

1670

Features

  • 4.5mm compression.
  • The closing process is always clockwise.
  • By turning the insert 90° the cam is first put into closed position.
  • By turning an additional 90°, the cam will be pulled towards the frame.
  • The H-dimension can be easily adjusted by the adjusting screw.
  • Vibration-proof according to DIN EN 61373.
  • IP65 according to DIN EN 60529.
  • RH / LH application.
  • A pre-assembled quarter-turn can be fitted through the cutout.

Materials

  • Housing, insert shaft and cam: zinc die, black
  • T-handle: PA, black
  • Adjusting screw and nut: steel, zinc plated
Pris 199,00 kr.

På fjernlager

Compression Latch with Hex Wrench
search

Compression Latch with Hex...

1671

Features

  • 4.5mm compression.
  • The closing process is always clockwise.
  • By turning the insert 90° the cam is first put into closed position.
  • By turning an additional 90°, the cam will be pulled towards the frame.
  • The H-dimension can be easily adjusted by the adjusting screw.
  • Vibration-proof according to DIN EN 61373.
  • IP65 according to DIN EN 60529.
  • RH / LH application.
  • A pre-assembled quarter-turn can be fitted through the cutout.

Materials

  • Housing, insert shaft and cam: zinc die, black
  • T-handle: PA, black
  • Adjusting screw and nut: steel, zinc plated
Pris 199,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.