. Bakkamera Interface til C1/108/Aygo .
Bakkamera Interface til C1/108/Aygo
search
  • Bakkamera Interface til C1/108/Aygo

Bakkamera Interface til C1/108/Aygo

449,00 kr.
Inkl. moms
Antal
På fjernlager

Ref: 27-226

Med dette bakkamera interface kan der monteres et eftermarkeds bakkamera på OE radioen i Citroen, Peugeot og Toyota biler med X-Touch/ X-Nav system.
 

Passer på:

Citroen C1 (2014 ->)

Peugeot 108 (2014 ->)

Toyota Aygo (2014 ->)

 

Bemærk:

Fremtidige ændringer/opdateringer af køretøjets software kan forårsage funktionsfejl i interfacet.

Det kan muligvis klares ved en softwareopdatering af interfacet men det kan vi ikke garantere.

En evt. opdatering koster 500,- og interfacet skal indsendes for egen regning. Arbejdsomkostninger for og andre udgifter forbundet med softwareopdateringerne refunderes ikke.

Derfor anbefales det ikke at opdatere bilens multimedie system.

 

NB: Kun til biler med X-Touch/ X-Nav radio enhed.

27-226%20connection%20diagram.jpg

Vær opmærksom på:

Power of the additionally installed rear view camera should be taken from the ACC line (first key turn) otherwise camera input will not be active.

- Supporter kun NTSC kamera

1. Ensure the vehicle_s ignition is off and the key has been removed.

2. Remove the standard Head Unit with reference to the manufacturer_s instructions.

3. Disconnect the 8-pin from the rear of the Head Unit. And Connect the 8-pin female connector of 27-226 to the connector just removed from the Head Unit.

4. Connect the male 8-pin of 27-226 connector to the Head Unit.

5. Only connect the red and black 6V wires if the camera being using needs an 6V power supply. The camera being used is a 12V camera an alternative ignition live; fused power supply will need to be used.

6. Test the camera fully before re-installing the Head Unit

27-226

Specifikke referencer