. Køb AdamHall hos CC ProShop .
Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

AdamHall

AdamHall

Aktive filtre

  • Mærker: Adam Hall Accessories
  • Mærker: Adam Hall Connectors
  • Mærker: Adam Hall Stands
  • Mærker: NEUTRIK
Isolation Pad for Studio Monitors 170 x 300 mm
search

Isolation Pad for Studio...

PAD ECO 1

The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.

Pris 129,00 kr.

På lager

Deco Cloth B1 with Burnished Grommets Hemmed 6 x 3 m
search

Deco Cloth B1 with...

0151 X 63MADE in GERMANY !

Black deco molton impregnated in flame retardant and 160-g-quality, as curtain, backdrop or for decorative purposes. The fabrics have grommets at intervals of 25 centimeters along one side are backed with an additional strip of webbing, permitting fast and secure installation both tightly stretched as well as loosely pleated. The grommets have a rustproof burnished plating and a 12-millimetre hole diameter. The outer edges are hemmed, while the bottom edge is unhemmed, so that the material can be cut to the necessary length quickly and easily.

Pris 1.519,00 kr.

På lager

Fine Rib Rubber Mat Black 0.7 x 10 m
search

Fine Rib Rubber Mat Black...

85970Economy Drop Over

The Defender® RILLS MAT is a hard wearing fine ribbed, slip-resistant styrene butadiene rubber mat for covering cable lines to prevent tripping hazards. A coarse underside pattern provides grip on a multitude of surfaces. Easily cut to size Defender® RILLS MAT is available in 10 m lengths with a choice of 70 and 100 cm widths.

Pris 769,00 kr.

På lager

Soft pvc cable crossover for floor 3m long
search

Soft pvc cable crossover...

859C 10 M3Adam Hall Accessories Rubber Cable Duct, Black

Cables of all kinds can quickly become a tripping hazard, become frayed or look aesthetically annoying in the office, at home or in public facilities. The 859 C10 M3 rubber cable duct by Adam Hall Accessories provides a solution to these common problems.

The trip protection is flexible and can be cut from its 3-metre length to any desired length. Thanks to its channel width of 10 mm and channel height of 8 mm, it protects power cables, network cables, aux cables, USB cables and other cables with a thickness of up to 8 mm. At the same time, the cable is held securely in the channel and the entire cable crossover remains slip-resistant.

The Adam Hall Accessories cable duct 859 C10 M3 protects cables, prevents falling and tripping accidents and provides a more visually appealing appearance in offices, homes and public facilities, both indoors and outdoors.

Pris 219,00 kr.

På lager

Neutrik Jack TRS Neutrik® | angled plug
search

Neutrik Jack TRS Neutrik® -...

NP3RX-BAG

3 pole 1/4" professional phone plug, nickel contacts, black shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Features & Benefits
  • Extra slim 1/4" plug for highest packing density
  • Robust diecast shell in stylish design
  • Proven chuck type strain relief for reliable cable retention
  • Sleek design for best handling convenience
  • Precision machined one-piece contacts - avoid hook up of tip contact
Pris 89,00 kr.

På lager

Cabinet Flange
search

Cabinet Flange

SM 707
  • Adjustable Angle Speaker Stand Receptacle for Loudspeaker Boxes
  • Angle adjustable up to +/- 13,5º in 4,5º steps
  • Fits SPS56B and most other standard speaker stands
  • For speakers with a maximum weight of 25 kg and a minimum weight of 4.5 kg.
  • Patented
Pris 109,00 kr.

På lager

Neutrik Adapter XLR 3-pole male to XLR 3-pole male Neutrik®
search

Neutrik Adapter XLR 3-pole...

NA3MM

3 pole XLR male - 3 pole XLR male (gender conversion adapter)

Features & Benefits
  • Versatile, pre-wired and ready to use adapters to reliably interlock various connector systems
  • Professional look and compact space saving design, based on the XX Series
  • Rugged diecast shell for best reliability.
Pris 129,00 kr.

På lager

Neutrik HDMI chassis connector
search

Neutrik HDMI chassis connector

NAHDMI-W-B

Neutrik's HDMI solution for the transmission of any digital TV and PC video format including high-definition video (HDTV) can be integrated in networks very easy.

Pris 189,00 kr.

På lager

Neutrik Jack TRS Neutrik® | angled plug with gold-plated contacts
search

Neutrik Jack TRS Neutrik® -...

NP3RX-B

3 pole right-angle 1/4" professional phone plug, gold contacts, black shel

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Pris 99,00 kr.

På lager

Neutrik Jack TS Neutrik® | angled plug
search

Neutrik Jack TS Neutrik® -...

NP2RX

1/4" professional right-angle phone plug, 2 pole, nickel contacts, nickel shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Features & Benefits
  • All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protection
  • Extra slim 1/4" plug for highest packing density
  • Robust diecast shell in stylish design
  • Proven chuck type strain relief for reliable cable retention
  • Sleek design for best handling convenience
  • Precision machined one-piece contacts - avoid hook up of tip contact
Pris 59,00 kr.

På lager

Neutrik 3-pole XLR panel jack combined with 6.35 mm jack socket
search

Neutrik 3-pole XLR panel...

NCJ6FA V 0

3-pole XLR panel jack combined with 6.35 mm jack in the smallest XLR housing available, stereo, vertical PCB mounting, retention spring

Pris 29,00 kr.

På lager

Music Stand
  • På tilbud!
  • -30,00 kr.
search

Music Stand

SMS 11Space saving collapsible music stand - ideal for taking along with your instrument case.

Pris 209,00 kr. Normalpris 239,00 kr.

På lager

Height-Adjustable Studiomonitor Stand
  • På tilbud!
  • -30,00 kr.
search

Height-Adjustable...

SKDB 039

This universal studio monitor stand consists of 35/40 mm black powder-coated tubes and holds speakers weighing up to 35 kg. The height is adjustable in 12 cm increments, while a T-screw and a locking pin ensure increased safety.

The standing space required measures 230 x 230 mm and also provides space for your monitor speakers. The stand_s upper tube is fitted with a plastic clip for discreet cable guidance. The triangular foot can be fitted with three adjustable plastic feet or with steel spikes. Removing the stand_s shelf allows the stand to be used with any speaker in combination with a 36 mm standard flange.

Pris 319,00 kr. Normalpris 349,00 kr.

På lager

Lighting Stand T-Bar with 28 mm TV Spigot
  • På tilbud!
  • -20,00 kr.
search

Lighting Stand T-Bar with...

SLTS 017 CB

This square T-bar fits onto all lighting stands with 28 mm sockets and is a direct replacement for our AH-Stand SLTS017. It features 4 fixture mounting points and holds up to 45 kg evenly distributed. The 123 cm T-bar comes with a set of matted M8 x 45 mm bolts and wing nuts.

Pris 139,00 kr. Normalpris 159,00 kr.

På lager

Lighting Stand large with TV Spigot Adapter
  • På tilbud!
  • -60,00 kr.
search

Lighting Stand large with...

SLTS 017 E

Lighting Stand large with holding fixture for 28 mm TV Spigot

Pris 579,00 kr. Normalpris 639,00 kr.

På lager

Neutrik 7-Way Adjustable Angled XLR Connector
search

Neutrik 7-Way Adjustable...

NC3MRX

3 pole right angle male cable connector, nickel housing, silver contacts

The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features & Benefits
  • Extra slim right-angle connector
  • 7 selectable cable outlet positions
  • Male connector with improved locking recess without "window", more stringent housing increases durability
  • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
  • Boot with polyurethane gland gives high protection to cable bending stresses
  • Coloured rings and boots available for coding or identification
  • Sleek and ergonomic design - valuable and handy
  • Branded with unique hologram - guarantees genuine and authentic Neutrik product
Pris 99,00 kr.

På lager

Neutrik XLR plug 3-pole female Neutrik® | angled plug
search

Neutrik XLR plug 3-pole...

NC3FRX

3 pole right angle female cable connector, nickel housing, silver contacts

The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features & Benefits
  • Extra slim right-angle connector
  • 5 selectable cable outlet positions
  • Unique cage design of female contact for low contact resistance and high integrity
  • Female contact incorporates a solder barrier to prevent solder running into the contact mating area
  • Female connector with improved solid metal latch which is larger and easier to handle
  • Additional ground spring contacts for better shell ground continuity
  • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
  • Boot with polyurethane gland gives high protection to cable bending stresses
  • Coloured rings and boots available for coding or identification
  • Sleek and ergonomic design - valuable and handy
  • Branded with unique hologram - guarantees genuine and authentic Neutrik product
Pris 109,00 kr.

På lager

Neutrik XLR plug 3-pole female Neutrik®
search

Neutrik XLR plug 3-pole...

NC3FX

3 pole female cable connector with Nickel housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

Features & Benefits
  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
  • Coloured rings and boots available for coding and marking
  • UL recognized components
Pris 59,00 kr.

På lager

Laptop Stand
search

Laptop Stand, White

SLT 001 EWThanks to its adjustable Height & Width the Adam Hall Laptop Stand will offer every DJ flexibility to the fullest!
Pris 209,00 kr.

På lager

Keyboard stands
  • På tilbud!
  • -30,00 kr.
search

Keyboard stands

SKS 03

Stable keyboard stand with square section double bracing and quick adjustment

High-quality rubber feet

  • protect the floor from damage
  • non-slip (feet and support arms)
Pris 299,00 kr. Normalpris 329,00 kr.

På lager

Wind up stand with T-Bar black
  • På tilbud!
  • -290,00 kr.
search

Wind up stand with T-Bar black

SWU 400 T

The SWU400T is an affordable lighting stand that features convenient height adjustment by means of a hand crank. Thanks to its high load bearing capacity of 85 kg, the removable crossbar, and the upper tube with a diameter of 35 mm, the SWU400T is also suitable for use as a speaker stand.

The sturdy steel construction has a black powder-coated finish; the upper tube and extensions are galvanized. A levelling foot ensures secure positioningof the wind up stand even on uneven surfaces. All adjustable elements are secured with spring bolts in addition to the tommy screws. The SWU400T weighs 19.7 kg and is extendable from a minimum height of 190.5 cm to a maximum of 4m.

Pris 2.069,00 kr. Normalpris 2.359,00 kr.

På lager

Adapter XLR 3-pole female to XLR 5-pole male
search

Adapter XLR 3-pole female...

4 STAR A XF3 XM5

If you want to quickly adapt a normal 3-pole XLR cable to a 5-pole connection, this small adapter helps without having to make any structural changes to the cable. This little helper should not be missing from any adapter case.

Pris 79,00 kr.

På lager

Neutrik Dummy Plug for XLR male Receptacles
search

Neutrik Dummy Plug for XLR...

NDM

The dummyPLUG NDM for Neutrik male XLR receptacles enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

Pris 19,00 kr.

På lager

Acoustic Molton B1 Creme 500g/m²
search

Acoustic Molton B1 Creme...

0160 WH

Acoustic molton impregnated in flame retardant and 500-g-quality, for rehearsal room , studios and stages with excellent sound absorption coefficient.

Pris 319,00 kr.

På lager

Neutrik XLR plug 3-pole female Neutrik®
search

Neutrik XLR plug 3-pole...

NC3FX-BAG

3 pole female cable connector, black metal housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

Features & Benefits
  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
  • Coloured rings and boots available for coding and marking
  • UL recognized components
Pris 59,00 kr.

På lager

LED Light for Music Stand
search

LED Light for Music Stand

SLED 2 PRO

The SLED2Pro is a compact, handy light with a patented design intended for music stands. The 4 bright and efficient LEDs can be switched individually between 2 brightness levels. Also, the light cone is adjustable thanks to the flexible 220 mm long goosenecks.

Due to its long operating time, it is also suitable as a mobile reading lamp and multifunctional clip light for all lighting needs at home and on the go.

  • 2 flexible goosenecks
  • Clip fastening for music stand
  • Incl. Batteries (3 x AAA)
  • Dimensions (folded): 110 x 60 x 50 mm
Pris 129,00 kr.

På lager

Universal Hook Clamp with Clamping Lever Black - VERSION 2
search

Universal Hook Clamp with...

SUPER CLAMP MK2

When you face challenges like mounting lighting equipment, positioning cameras or loudspeakers at the proper angle, hanging Molton and backdrops, or mounting other equipment safely on a truss, you need just the right companion you can trust in.

The new Super Clamp now offers you the possibility to fix heavy objects such as lighting equipment easily with one click. The "One-Click Auto-Lock", snaps the fixing bolt directly into place.

Whether working as a photographer, a YouTuber in a home studio, or as a lighting technician attaching lights to a truss, the Super Clamp gives your creativity the freedom it requires.

As well as having an impressive load capacity, the rugged Super Clamp can be used in practically any situation and on any surface - curved or flat. Your new clamping companion can support up to 20 kg and enjoys German TÜV certification.

See for yourself how quick and easy it is to mount your equipment securely using the Super Clamp.

Pris 269,00 kr.

På lager

Lighting Stand large with TV Spigot Adapter
  • På tilbud!
  • -60,00 kr.
search

Lighting Stand large with...

SLTS 017

  • Large lighting stand with crossbar and TV spigot adaptors (length 123 cm).
  • Including set of 4 screws with washer, safety disc and wing nuts
Pris 659,00 kr. Normalpris 719,00 kr.

På lager

Lighting Stand
  • På tilbud!
  • -20,00 kr.
search

Lighting Stand

SLS 6

  • Lightweight lighting stand with crossbeam and 2-stage boom arm
  • Including set of 4 screws with washer, safety disc and wing nuts
Pris 359,00 kr. Normalpris 379,00 kr.

På lager

Neutrik USB chassis connector 2.0 Adapter (Typ A & B)
search

Neutrik USB chassis...

NAUSB-W-B

Due to the rising digitisation the interface problems between audio/video networks, IT equipment, MP3 camcorders, etc. increase. A rugged solution is needed.

Neutrik's reversible USB gender changer, mounted in the standardized D-shape housing, and the rugged patch cables solve this problem.

Pris 99,00 kr.

På lager

16 mm Bolt with M10 Internal Thread for SCP710B
search

16 mm Bolt with M10...

SS 019

The SS019 is a 16 mm bolt with M10 thread designed for the SCP710B universal clamp. It is made of stainless steel with a thread depth of 25 mm.

Pris 49,00 kr.

På lager

Y-adapter 2 x RCA female to 6.3 mm jack TRS male
search

Y-adapter 2 x RCA female to...

4 STAR AY RF2 JM3

Ready for immediate use and the perfect addition to any adapter case. The little helpers of the 4 Star series of our adapters are perfectly suited to react quickly in cases of missing connections. So you are perfectly equipped for situations in which the right connection is needed.

Pris 29,00 kr.

På lager

Adapter mini jack female stereo to 6.3 mm jack male stereo
search

Adapter mini jack female...

4 STAR A MF3 JM3 GOLD

Our 4 STAR A MF3 JM3 GOLD is used to adapt 3.5 mm jack plugs to 6.3 mm. From time to time, you have to change from a mini jack to a normal jack, for example, if the headphones do not fit into the jack socket. This way, you can use your favourite headphones with any interface. No adapter case should be without such a cool helper.

Pris 49,00 kr.

På lager

Adapter Minijack female TRS to Jack TRS
search

Adapter Minijack female TRS...

3 STAR A MF3 JM3

Our 3 STAR A MF3 JM3 is used to adapt 3.5 mm jack plugs to 6.3 mm. From time to time, you have to change from a mini jack to a normal jack, for example, if the headphones do not fit into the jack socket. This way, you can use your favourite headphones with any interface. No adapter case should be without such a cool helper.

Pris 19,00 kr.

På lager

Neutrik speakON® chassis connector 4-pole male Neutrik®
search

Neutrik speakON® chassis...

NL4MPXX

4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16" flat tabs

The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate.

Pris 49,00 kr.

På lager

Universal Guitar Stand
search

Universal Guitar Stand

SGS 103

Universal guitar stand for acoustic and electric guitars with soft padding.

  • Not suitable for long-term use with guitars that have a nitro lacquer finish
Pris 159,00 kr.

På lager

Adapter RCA female to 6.3 mm jack mono male
search

Adapter RCA female to 6.3...

4 STAR A RF2 JM2

Ready to go! The perfect addition to every adapter case. In case you have to adapt from RCA to Jack, this one is the perfect solution. With its robust housing made of metal, you are well equipped for such occasions.

Pris 19,00 kr.

På lager

Universal Hook Clamp with Toggle black
search

Universal Hook Clamp with...

SUPER CLAMP
  • Perfect for lighting and multimedia applications
  • Adjustable clamping lever - can be operated in any position
  • Full metal (stainless steel and die-cast aluminium alloy)
  • For mounting on round and square tubes as well as on flat objects
  • Clamping range: 13 _ 55 mm
  • 5/8" (16 mm) hexagonal or circular pin insert
  • 1 x M6 and 2 x M5 thread
  • TÜV certified
  • Max. load capacity: 20 kg
  • Not oxidising
  • Various mounting bolts available as an option
Pris 249,00 kr.

På lager

Twin Adapter 2 x RCA female to 2 x RCA female
search

Twin Adapter 2 x RCA female...

4 STAR AT RF2 RF2

Sound enigeers little helper, such as our 4 STAR AT RF2 RF2 are indispensable for every adapter case. You will be happy to have one if you need a gender-changer all of a sudden.

Pris 29,00 kr.

På lager

XLR plug 3-pole male | Winkelstecker
search

XLR plug 3-pole male -...

4 STAR C XM3 A

Sometimes it just has to be angled... Our XLR connectors from the 4 Star series are not only available in many different colours, but also in an angled version. Perfectly suited for little space, e.g. in the rack, in the case or on the pedalboard. The 4 STAR C XM3 A is suitable for symmetrical cables with a diameter of 5 - 7 mm.

Pris 49,00 kr.

På lager

Neutrik Adapter Speakon 2/4-pole to Speakon 2/4-pole
search

Neutrik Adapter Speakon...

NL4MMX

Lockable 4 pole speakON adapter

Links two NL2/4F*s together for cable extension. Changes gender to male when permanently locked on the cable.

Features permanent secure connection on a speakON cable connector using 2nd lock. Can be permanently attached to NL2/4F*.

Pris 89,00 kr.

På lager

Standard speaker connector 4-pole female
search

Standard speaker connector...

4 STAR C SF4

The standard for connecting loudspeakers. A true classic if it comes to speaker connectors that need to be compatible with speakON sockets. Screwable and solderable.

Pris 49,00 kr.

På lager

Neutrik Dummy Plug for XLR Chassis Connectors
search

Neutrik Dummy Plug for XLR...

NDF

The dummyPLUG NDF for Neutrik female XLR receptacles enable you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

Pris 19,00 kr.

På lager

Neutrik 8-pole speakON to 8-pole speakON adapter
search

Neutrik 8-pole speakON to...

NL8MMXX

To extend a speakON cable, you need a straight-through adapter, as the two ends of the cable always consist of female connectors and it is not possible to plug them together as with XLR cables, for example. For this purpose, you can get the NL8MMXX from Neutrik (R), for example. The adapter is made of sturdy die-cast zinc and comes with two male sockets and is only suitable for 8-pole speakON. This adapter is also available for the 4-pole version.

Pris 279,00 kr.

På fjernlager

Adapter 4-pole loudspeaker connector coupling
search

Adapter 4-pole loudspeaker...

4 STAR A SM4 SM4

Everybody knows the pain: Suddenly you have to extend your speaker cable. Lengthen a Standard Speaker Connector and speakON cable is roughly as compatible as extending jack cables: actually not at all! With our K4 A SM4 SM4 you have the right buddy with you doing the job.

Pris 89,00 kr.

På fjernlager

Sustain Pedal (Foot Switch)
search

Sustain Pedal (Foot Switch)

SP 1

The SP1 Sustain Pedal is designed to work and feel just like the sustain pedal of an acoustic piano. This highquality pedal features a polarity switch to select either the normally open or the normally closed mode. Thanks to the rubber coated housing the SP1 grips efficiently to the floor and stays put while you play. This high end damper pedal is compatible to almost any electronic keyboard featuring a 1/4_ input jack.

Pris 349,00 kr.

På fjernlager

Isolation Pad for Studio Monitors 265 x 330 mm
search

Isolation Pad for Studio...

PAD ECO 2

The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.

Pris 179,00 kr.

På fjernlager

Dual-tilt flange (0°/5°)
search

Dual-tilt flange (0°/5°)

SM 7 DT

The SM7DT is a mounting flange with 0° and 5° horizontal tilt for loudspeaker cabinets on speaker stands. Thus, the dispersion of the high frequencies can be controlled and adjusted according to the location. With the 5° tilt, the speaker can be tilted forwards as well as tilted to the rear (depending on the direction of installation of the flange). The flange has a 75 mm installation depth and is made of black powder-coated aluminium and is suitable for a 35 mm tube diameter.

Pris 119,00 kr.

På fjernlager

Guitar Footrest
search

Guitar Footrest

SGS 017

Guitar foot rest with non-slip rubber surface

Pris 89,00 kr.

På fjernlager

Holdon Midi Clip white - 250 stk.
search

Holdon Midi Clip white -...

MIDI CLIP WHITE

Midi Clip white (load up to 100 kg) for mounting Molton, tarpaulins, etc. This clip is especially suitable for mounting Molton fabrics without eyelets, or for fabrics that do not have any other mounting option. The Molton fabric is easily inserted between the clip and secured, without damaging the material.

Pris 2.969,00 kr.

På fjernlager

Tilbage til toppen

Mest solgte

AFMONTERINGSNØGLER BLAUPUNKT 2 STK.
search

AFMONTERINGSNØGLER...

Vægt (Emb.) 60g
Rumfang (Emb.) 0.00074025
Bredde (Emb.) 94mm
Længde (Emb.) 225mm
Højde (Emb.) 35mm
Pris 19,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.