. Sustain Pedal (Foot Switch) .
Sustain Pedal (Foot Switch)
search
  • Sustain Pedal (Foot Switch)

Sustain Pedal (Foot Switch)

349,00 kr.
Inkl. moms
SP 1

The SP1 Sustain Pedal is designed to work and feel just like the sustain pedal of an acoustic piano. This highquality pedal features a polarity switch to select either the normally open or the normally closed mode. Thanks to the rubber coated housing the SP1 grips efficiently to the floor and stays put while you play. This high end damper pedal is compatible to almost any electronic keyboard featuring a 1/4_ input jack.

Antal
På fjernlager

Ref: SLDSP1

Product typeOther Studio and Recording Equipment
Cabinet materialPlastic
Bottom of the housingNon-slip Rubber Surface
Pedalchromium plated
ControlsSwitcher normally closed/normally open
Cable length2 m
Connection type6.3 mm TS
Weight0,96 kg
Adam Hall Accessories
SLDSP1

Specifikke referencer

9 andre varer i den samme kategori:

Rack Stand 12 U
  • På tilbud!
  • -20,00 kr.
search

Rack Stand 12 U

STRS 12 U

  • Rack stand 12 units high
  • Black finish, drilled tapped for M5 screws
  • 24 screws included
Pris 159,00 kr. Normalpris 179,00 kr.

På fjernlager

Gravity Studio Monitor Speaker Stand
  • På tilbud!
  • -60,00 kr.
search

Gravity Studio Monitor...

SP 3102

A mix's sound and feel is heavily influenced by having your monitors placed in the proper position. In a home studio, however, where space is at a premium, it's not always possible to put your studio monitors right next to a table using suitable stands. The Gravity SP 3102 is the solution to this problem. The flexible, powder-coated steel stand squeezes onto pretty much any desk. The edge of the solid base is only 25 cm in length. Monitor boxes weighing up to 25 kg can be flexibly positioned at the height you want, and EVA padding and tilting protection make it possible to vertically angle them by up to 15° and horizontally rotate them 360°, meaning you can always find the perfect position for your studio monitors. The colourful G-rings make a clear design statement and can be swapped out in mere seconds. An additional black ring set is also supplied with the product.

Pris 529,00 kr. Normalpris 589,00 kr.

På fjernlager

Palmer Passive Monitor Controller
search

Palmer Passive Monitor...

MONICON® L

The Palmer Monicon® L is a precise, analogue volume control that connects between a computer or audio interface and active monitor speakers. The switch is completely passive and distortion-free, the LED displays and built-in headphone amplifier are powered via the included power supply.

Symmetric combo sockets serve as stereo input. The Monicon® L_s AUX input features RCA sockets and a 3.5 mm stereo jack. The compact console offers outputs for two monitor pairs and a mono summed output via XLR sockets. The stereo or AUX input can be selected alternately, the two outputs individually and together. In addition to its large volume controller, the Monicon® L is also equipped with mono, mute and PFL switches, a 6.35 mm headphone output, and separate AUX and headphone controllers for convenient operation.

Pris 2.129,00 kr.

På fjernlager

Isolation Pad for Studio Monitors 170 x 300 mm
search

Isolation Pad for Studio...

PAD ECO 1

The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.

Pris 129,00 kr.

På lager

Isolation Pad for Studio Monitors 265 x 330 mm
search

Isolation Pad for Studio...

PAD ECO 2

The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.

Pris 179,00 kr.

På fjernlager

Gravity Absorber pucks for loudspeakers ( 4 pcs.)
  • På tilbud!
  • -40,00 kr.
search

Gravity Absorber pucks for...

SA SM IF 01

Those who do not place their studio monitors on a table surface, but use dedicated stands and mounts for monitoring in their own studio, are already doing a lot of things correct. Nevertheless, studio monitors also generate oscillations and vibrations here, which are transferred to the supporting surface and can thus impair the stereo image of the speakers. Usually, the larger the surface, the more energy transfer takes place. With the SA SM IF 01 absorber pucks, Gravity has a solution ready that can have a big impact with small means.

The Gravity Absorber pucks can be placed freely under a loudspeaker (e.g. studio monitor) and achieve a decoupling of the loudspeaker cabinet and the installation surface due to their silica gel surface. This significantly reduces vibrations and oscillations and makes the stereo image more precise by reducing acoustic smearing and discolouration.

The load capacity is 36 kg when using four Gravity SASMIF01 absorber pucks, which means that most speakers on the market can be used without any problems.

Pris 199,00 kr. Normalpris 239,00 kr.

På fjernlager

Rack Stand 6 U
search

Rack Stand 6 U

STRS 6 U
  • Rack stand 6 units high
  • Black finish, drilled tapped for M5 screws
  • 12 screws included
Pris 129,00 kr.

På fjernlager

Gravity Mounting/ Rack Bracket for Gravity® DJ Desk
  • På tilbud!
  • -30,00 kr.
search

Gravity Mounting/ Rack...

XSP 10130

Small helpers - big impact. With the XSP 10130 rack brackets, you can use your Gravity® DJ Desk in an even more versatile and comfortable way. Whether you want to add 19'' equipment to your studio centre, attach a rack drawer for accessories or simply place a power strip firmly and securely within reach, the Gravity® rack brackets offer a multitude of possible applications.

The robust brackets are made of powder-coated steel and are quickly and easily mounted to the rear rail of the FDJ T 01 DJ table via locking screws. As they are two individual brackets, you can adjust the width and positioning as required. The mounting is done via the integrated cage nuts.

Pris 199,00 kr. Normalpris 229,00 kr.

På fjernlager

Gravity DJ Desk
search

Gravity DJ Desk

F T 01

Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ Desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes.

The DJ Desk offers enough space to place two decks and a mixing console or your DJ controller. Your performance setup with samplers, sequencers and synthesizers will also find enough room thanks to a surface depth of 50 cm and a width of 119 cm.

In case you need additional space, simply expand the Gravity® DJ Desk with an optionally available laptop holder or two studio monitor holders. The rear rail also offers further flexible expansion options that are tailored to your individual needs as a DJ, producer or instrumentalist.

You will have no trouble adapting the desk to your individual height. It can be set between 68 cm and 109 cm

More stability is provided by the adjustable levelling feet, which compensate for any unevenness of the floor, and the mountable cross bar, which significantly strengthens the table.

Pris 2.509,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.