. Køb AdamHall hos CC ProShop .
Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

AdamHall

AdamHall

Aktive filtre

  • Mærker: Adam Hall Accessories
  • Mærker: NEUTRIK
Deco Cloth B1 with Burnished Grommets Hemmed 6 x 3 m
search

Deco Cloth B1 with...

0151 X 63MADE in GERMANY !

Black deco molton impregnated in flame retardant and 160-g-quality, as curtain, backdrop or for decorative purposes. The fabrics have grommets at intervals of 25 centimeters along one side are backed with an additional strip of webbing, permitting fast and secure installation both tightly stretched as well as loosely pleated. The grommets have a rustproof burnished plating and a 12-millimetre hole diameter. The outer edges are hemmed, while the bottom edge is unhemmed, so that the material can be cut to the necessary length quickly and easily.

Pris 1.519,00 kr.

På lager

Fine Rib Rubber Mat Black 0.7 x 10 m
search

Fine Rib Rubber Mat Black...

85970Economy Drop Over

The Defender® RILLS MAT is a hard wearing fine ribbed, slip-resistant styrene butadiene rubber mat for covering cable lines to prevent tripping hazards. A coarse underside pattern provides grip on a multitude of surfaces. Easily cut to size Defender® RILLS MAT is available in 10 m lengths with a choice of 70 and 100 cm widths.

Pris 769,00 kr.

På lager

Soft pvc cable crossover for floor 3m long
search

Soft pvc cable crossover...

859C 10 M3Adam Hall Accessories Rubber Cable Duct, Black

Cables of all kinds can quickly become a tripping hazard, become frayed or look aesthetically annoying in the office, at home or in public facilities. The 859 C10 M3 rubber cable duct by Adam Hall Accessories provides a solution to these common problems.

The trip protection is flexible and can be cut from its 3-metre length to any desired length. Thanks to its channel width of 10 mm and channel height of 8 mm, it protects power cables, network cables, aux cables, USB cables and other cables with a thickness of up to 8 mm. At the same time, the cable is held securely in the channel and the entire cable crossover remains slip-resistant.

The Adam Hall Accessories cable duct 859 C10 M3 protects cables, prevents falling and tripping accidents and provides a more visually appealing appearance in offices, homes and public facilities, both indoors and outdoors.

Pris 219,00 kr.

På lager

Neutrik Jack TRS Neutrik® | angled plug
search

Neutrik Jack TRS Neutrik® -...

NP3RX-BAG

3 pole 1/4" professional phone plug, nickel contacts, black shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Features & Benefits
  • Extra slim 1/4" plug for highest packing density
  • Robust diecast shell in stylish design
  • Proven chuck type strain relief for reliable cable retention
  • Sleek design for best handling convenience
  • Precision machined one-piece contacts - avoid hook up of tip contact
Pris 89,00 kr.

På lager

Neutrik Adapter XLR 3-pole male to XLR 3-pole male Neutrik®
search

Neutrik Adapter XLR 3-pole...

NA3MM

3 pole XLR male - 3 pole XLR male (gender conversion adapter)

Features & Benefits
  • Versatile, pre-wired and ready to use adapters to reliably interlock various connector systems
  • Professional look and compact space saving design, based on the XX Series
  • Rugged diecast shell for best reliability.
Pris 129,00 kr.

På lager

Neutrik HDMI chassis connector
search

Neutrik HDMI chassis connector

NAHDMI-W-B

Neutrik's HDMI solution for the transmission of any digital TV and PC video format including high-definition video (HDTV) can be integrated in networks very easy.

Pris 189,00 kr.

På lager

Neutrik Jack TRS Neutrik® | angled plug with gold-plated contacts
search

Neutrik Jack TRS Neutrik® -...

NP3RX-B

3 pole right-angle 1/4" professional phone plug, gold contacts, black shel

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Pris 99,00 kr.

På lager

Neutrik Jack TS Neutrik® | angled plug
search

Neutrik Jack TS Neutrik® -...

NP2RX

1/4" professional right-angle phone plug, 2 pole, nickel contacts, nickel shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Features & Benefits
  • All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protection
  • Extra slim 1/4" plug for highest packing density
  • Robust diecast shell in stylish design
  • Proven chuck type strain relief for reliable cable retention
  • Sleek design for best handling convenience
  • Precision machined one-piece contacts - avoid hook up of tip contact
Pris 59,00 kr.

På lager

Neutrik 3-pole XLR panel jack combined with 6.35 mm jack socket
search

Neutrik 3-pole XLR panel...

NCJ6FA V 0

3-pole XLR panel jack combined with 6.35 mm jack in the smallest XLR housing available, stereo, vertical PCB mounting, retention spring

Pris 29,00 kr.

På lager

Neutrik 7-Way Adjustable Angled XLR Connector
search

Neutrik 7-Way Adjustable...

NC3MRX

3 pole right angle male cable connector, nickel housing, silver contacts

The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features & Benefits
  • Extra slim right-angle connector
  • 7 selectable cable outlet positions
  • Male connector with improved locking recess without "window", more stringent housing increases durability
  • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
  • Boot with polyurethane gland gives high protection to cable bending stresses
  • Coloured rings and boots available for coding or identification
  • Sleek and ergonomic design - valuable and handy
  • Branded with unique hologram - guarantees genuine and authentic Neutrik product
Pris 99,00 kr.

På lager

Neutrik XLR plug 3-pole female  Neutrik® | angled plug
search

Neutrik XLR plug 3-pole...

NC3FRX

3 pole right angle female cable connector, nickel housing, silver contacts

The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features & Benefits
  • Extra slim right-angle connector
  • 5 selectable cable outlet positions
  • Unique cage design of female contact for low contact resistance and high integrity
  • Female contact incorporates a solder barrier to prevent solder running into the contact mating area
  • Female connector with improved solid metal latch which is larger and easier to handle
  • Additional ground spring contacts for better shell ground continuity
  • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
  • Boot with polyurethane gland gives high protection to cable bending stresses
  • Coloured rings and boots available for coding or identification
  • Sleek and ergonomic design - valuable and handy
  • Branded with unique hologram - guarantees genuine and authentic Neutrik product
Pris 109,00 kr.

På lager

Neutrik XLR plug 3-pole female  Neutrik®
search

Neutrik XLR plug 3-pole...

NC3FX

3 pole female cable connector with Nickel housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

Features & Benefits
  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
  • Coloured rings and boots available for coding and marking
  • UL recognized components
Pris 59,00 kr.

På lager

Neutrik Dummy Plug for XLR male Receptacles
search

Neutrik Dummy Plug for XLR...

NDM

The dummyPLUG NDM for Neutrik male XLR receptacles enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

Pris 19,00 kr.

På lager

Acoustic Molton B1 Creme 500g/m²
search

Acoustic Molton B1 Creme...

0160 WH

Acoustic molton impregnated in flame retardant and 500-g-quality, for rehearsal room , studios and stages with excellent sound absorption coefficient.

Pris 319,00 kr.

På lager

Neutrik XLR plug 3-pole female  Neutrik®
search

Neutrik XLR plug 3-pole...

NC3FX-BAG

3 pole female cable connector, black metal housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

Features & Benefits
  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
  • Coloured rings and boots available for coding and marking
  • UL recognized components
Pris 59,00 kr.

På lager

Universal Hook Clamp with Clamping Lever Black - VERSION 2
search

Universal Hook Clamp with...

SUPER CLAMP MK2

When you face challenges like mounting lighting equipment, positioning cameras or loudspeakers at the proper angle, hanging Molton and backdrops, or mounting other equipment safely on a truss, you need just the right companion you can trust in.

The new Super Clamp now offers you the possibility to fix heavy objects such as lighting equipment easily with one click. The "One-Click Auto-Lock", snaps the fixing bolt directly into place.

Whether working as a photographer, a YouTuber in a home studio, or as a lighting technician attaching lights to a truss, the Super Clamp gives your creativity the freedom it requires.

As well as having an impressive load capacity, the rugged Super Clamp can be used in practically any situation and on any surface - curved or flat. Your new clamping companion can support up to 20 kg and enjoys German TÜV certification.

See for yourself how quick and easy it is to mount your equipment securely using the Super Clamp.

Pris 269,00 kr.

På lager

Neutrik USB chassis connector 2.0 Adapter (Typ A & B)
search

Neutrik USB chassis...

NAUSB-W-B

Due to the rising digitisation the interface problems between audio/video networks, IT equipment, MP3 camcorders, etc. increase. A rugged solution is needed.

Neutrik's reversible USB gender changer, mounted in the standardized D-shape housing, and the rugged patch cables solve this problem.

Pris 99,00 kr.

På lager

16 mm Bolt with M10 Internal Thread for SCP710B
search

16 mm Bolt with M10...

SS 019

The SS019 is a 16 mm bolt with M10 thread designed for the SCP710B universal clamp. It is made of stainless steel with a thread depth of 25 mm.

Pris 49,00 kr.

På lager

Neutrik speakON® chassis connector 4-pole male Neutrik®
search

Neutrik speakON® chassis...

NL4MPXX

4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16" flat tabs

The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate.

Pris 49,00 kr.

På lager

Universal Hook Clamp with Toggle black
search

Universal Hook Clamp with...

SUPER CLAMP
  • Perfect for lighting and multimedia applications
  • Adjustable clamping lever - can be operated in any position
  • Full metal (stainless steel and die-cast aluminium alloy)
  • For mounting on round and square tubes as well as on flat objects
  • Clamping range: 13 _ 55 mm
  • 5/8" (16 mm) hexagonal or circular pin insert
  • 1 x M6 and 2 x M5 thread
  • TÜV certified
  • Max. load capacity: 20 kg
  • Not oxidising
  • Various mounting bolts available as an option
Pris 249,00 kr.

På lager

Neutrik Adapter Speakon 2/4-pole to Speakon 2/4-pole
search

Neutrik Adapter Speakon...

NL4MMX

Lockable 4 pole speakON adapter

Links two NL2/4F*s together for cable extension. Changes gender to male when permanently locked on the cable.

Features permanent secure connection on a speakON cable connector using 2nd lock. Can be permanently attached to NL2/4F*.

Pris 89,00 kr.

På lager

Neutrik Dummy Plug for XLR Chassis Connectors
search

Neutrik Dummy Plug for XLR...

NDF

The dummyPLUG NDF for Neutrik female XLR receptacles enable you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

Pris 19,00 kr.

På lager

Neutrik 8-pole speakON to 8-pole speakON adapter
search

Neutrik 8-pole speakON to...

NL8MMXX

To extend a speakON cable, you need a straight-through adapter, as the two ends of the cable always consist of female connectors and it is not possible to plug them together as with XLR cables, for example. For this purpose, you can get the NL8MMXX from Neutrik (R), for example. The adapter is made of sturdy die-cast zinc and comes with two male sockets and is only suitable for 8-pole speakON. This adapter is also available for the 4-pole version.

Pris 279,00 kr.

På fjernlager

Sustain Pedal (Foot Switch)
search

Sustain Pedal (Foot Switch)

SP 1

The SP1 Sustain Pedal is designed to work and feel just like the sustain pedal of an acoustic piano. This highquality pedal features a polarity switch to select either the normally open or the normally closed mode. Thanks to the rubber coated housing the SP1 grips efficiently to the floor and stays put while you play. This high end damper pedal is compatible to almost any electronic keyboard featuring a 1/4_ input jack.

Pris 349,00 kr.

På fjernlager

Holdon Midi Clip white - 250 stk.
search

Holdon Midi Clip white -...

MIDI CLIP WHITE

Midi Clip white (load up to 100 kg) for mounting Molton, tarpaulins, etc. This clip is especially suitable for mounting Molton fabrics without eyelets, or for fabrics that do not have any other mounting option. The Molton fabric is easily inserted between the clip and secured, without damaging the material.

Pris 2.969,00 kr.

På fjernlager

Schackle with Bolt
search

Schackle with Bolt, Nut and...

SH2 B 0325

High-strength tempered shackle, hot-dip galvanised, curved, with bolt, nut, and split pin.

Pris 139,00 kr.

På fjernlager

Bag Article Midi Clip for Molton Black ( 50 Pcs. )
search

Bag Article Midi Clip for...

MIDI CLIP BLK M50 AH

Midi Clip black (holds up to 100 kg) for fastening molton, canvas, covers etc. This clip is particularly suited for fastening materials that do not have eyelets or other fastening possibilities. The material is simply clamped down by the clip, so that the material itself does not get damaged.

Pris 549,00 kr.

På fjernlager

Holdon Midi Clip black - 250 stk.
search

Holdon Midi Clip black -...

MIDI CLIP BLACK

Midi Clip black (holds up to 100 kg) for fastening molton, canvas, covers etc. This clip is particularly suited for fastening materials that do not have eyelets or other fastening possibilities. The material is simply clamped down by the clip, so that the material itself does not get damaged.

Pris 2.969,00 kr.

På fjernlager

Truss Stacker Interface Eurotrussing plastic
search

Truss Stacker Interface...

38210 P

The TrussStacker system allows trussing to be easily and securely loaded onto castor boards and stacked together using notched interfaces for safe transport.

Note: the plastic variant is not suitable for 3-point truss systems.

Pris 189,00 kr.

På fjernlager

Adjustable Tent Clamp
search

Adjustable Tent Clamp, Black

TENTCLAMP B

Easily create suspension points for audio and lighting equipment using this adjustable tent clamp. Designed specifically for clear span keder beam tents, it accomodates beam widths from 50 to 100 mm and supports weights of up to 150 kg. The clamp features five built-in attachment points for eye bolts and other rigging hardware.

Pris 339,00 kr.

På fjernlager

Adjustable Tent Clamp
search

Adjustable Tent Clamp,...

TENTCLAMP S

Easily create suspension points for audio and lighting equipment using this adjustable tent clamp. Designed specifically for clear span keder beam tents, it accomodates beam widths from 50 to 100 mm and supports weights of up to 150 kg. The clamp features five built-in attachment points for eye bolts and other rigging hardware.

Pris 339,00 kr.

På fjernlager

EUROTRUSS Roll Board with 2 x 100 mm Rolls
search

EUROTRUSS Roll Board with 2...

EUROTRUSS ROLL BOARD 381022

The Truss Stacker roller board system combined with the 382100 stacker interface facilitates easy, effortless traverse stacking for safer transport. The birch ply roller boards are available in versions with 2 x 2, 3 and 4 rollers and are suitable for 3 and 4 point traverses.

Pris 719,00 kr.

På fjernlager

EUROTRUSS Roll Board with 3 x 100 mm Rolls
search

EUROTRUSS Roll Board with 3...

EUROTRUSS ROLL BOARD 381033

The Truss Stacker Roller Board System combined with the 'Interface Stacker 382100' enables easy and trouble-free stacking of trusses for safe transport. The birch plywood roller boards are available in versions with 2 x 2.3, 3 and 4 castors and are suitable for 3 and 4 point trusses.

Pris 899,00 kr.

På fjernlager

Stacker Interface for Eurotruss Roll Board
search

Stacker Interface for...

TRUSS STACKER INTERFACE EUROTRUSS

The Truss Stacker System enables easy and trouble-free stacking of trusses directly onto specially designed roller boards for safe transport with these 'Interface Stackers'. The corresponding roller boards are available in 2-roller, 3-roller and 4-roller versions and are universally usable for 2 x 2, 3 and 4 point trusses with an outer pipe dimension of 288 - 291 mm.

Pris 99,00 kr.

På fjernlager

Schackle with Bolt
search

Schackle with Bolt, Nut and...

SH 20325

High-strength tempered shackle, hot-dip galvanised, curved, with bolt, nut, and split pin.

Pris 139,00 kr.

På fjernlager

Bag Article Midi Clip for Molton White ( 50 Pcs. )
search

Bag Article Midi Clip for...

MIDI CLIP WHI M50 AH

Midi Clip white (load up to 100 kg) for mounting Molton, tarpaulins, etc. This clip is especially suitable for mounting Molton fabrics without eyelets, or for fabrics that do not have any other mounting option. The Molton fabric is easily inserted between the clip and secured, without damaging the material.

Pris 549,00 kr.

På fjernlager

Holdon Mini clip for molleton
search

Holdon Mini clip for...

VX TRAC WHI

Holdon® Xtra is a reusable clip that has been specially developed for extremely fast attachment to thinner, but also thicker, compressible materials. Examples of flexible materials, e.g. as banner clips for banners and signage materials or as camping clips for gauze, molleton as well as for sleeping mats, tents, nets, windbreaks, tarpaulins in the garden, but also for stage applications in the event sector. With Holdon® Xtra, you get a cleaner, faster and smarter alternative to conventional eyelets, with simple manual assembly directly on site.

Pris 2.199,00 kr.

På fjernlager

Holdon Mini clip for molleton
search

Holdon Mini clip for...

VX TRAC BLK

Holdon® Xtra is a reusable clip that has been specially developed for extremely fast attachment to thinner, but also thicker, compressible materials. Examples of flexible materials, e.g. as banner clips for banners and signage materials or as camping clips for gauze, molleton as well as for sleeping mats, tents, nets, windbreaks, tarpaulins in the garden, but also for stage applications in the event sector. With Holdon® Xtra, you get a cleaner, faster and smarter alternative to conventional eyelets, with simple manual assembly directly on site.

Pris 2.199,00 kr.

På fjernlager

Holdon Mini Clip white
search

Holdon Mini Clip white

VMINC WHI

Mini Clip white for fastening molton, canvas, covers etc. This clip is particularly suited for fastening materials that do not have eyelets or other fastening possibilities. The material is simply clamped down by the clip, so that the material itself does not get damaged.

Pris 19,00 kr.

På fjernlager

Holdon Mini Clip black - 250 stk.
search

Holdon Mini Clip black -...

VMINC BLK

Mini Clip black for fastening molton, canvas, covers etc. This clip is particularly suited for fastening materials that do not have eyelets or other fastening possibilities. The material is simply clamped down by the clip, so that the material itself does not get damaged.

Pris 2.219,00 kr.

På fjernlager

Ratchet Lashing Strap 50 mm - 8.0 m
search

Ratchet Lashing Strap 50 mm...

SR 508

The lashings consist of high - tensile polyester (PES) webbing with an average tension of only 4% combined with a high quality push-ratchet. They come with the mandatory bluelabel, marked with length and admissible drag force. Manufactured in accordance with DIN60060/ VDI 2701, they are controlled by the Test-and Certification Authority (Technical Expert Committee) for traffic concerning quality and safety. Other types and lengths can be supplied anytime upon request on short notice.

Pris 349,00 kr.

På fjernlager

Ratchet Lashing Strap 25 mm - 10.0 m
search

Ratchet Lashing Strap 25 mm...

SR 2510

The lashings consist of high - tensile polyester (PES) webbing with an average tension of only 4% combined with a high quality push-ratchet. They come with the mandatory bluelabel, marked with length and admissible drag force. Manufactured in accordance with DIN60060/ VDI 2701, they are controlled by the Test-and Certification Authority (Technical Expert Committee) for traffic concerning quality and safety. Other types and lengths can be supplied anytime upon request on short notice.

Pris 149,00 kr.

På fjernlager

Ratchet Lashing Strap 35 mm - 10.0 m
search

Ratchet Lashing Strap 35 mm...

SR 3510

The lashings consist of high - tensile polyester (PES) webbing with an average tension of only 4% combined with a high quality push-ratchet. They come with the mandatory bluelabel, marked with length and admissible drag force. Manufactured in accordance with DIN60060/ VDI 2701, they are controlled by the Test-and Certification Authority (Technical Expert Committee) for traffic concerning quality and safety. Other types and lengths can be supplied anytime upon request on short notice.

Pris 219,00 kr.

På fjernlager

Lashing Strap with Clamp 25 mm
search

Lashing Strap with Clamp 25...

SZK 256

Durable 25 mm wide ratchet strap with sturdy clamping fastener. Manufactured in accordance with EN 12195-2 PES. Bears the compulsory blue label with details of length, reliable lashing capacity and verification ID. Boasting a maximum lashing capacity of LC 250 daN (approx. 0.25 t), this is a secure and verified fastening system for many different applications.

Pris 99,00 kr.

På fjernlager

Ratchet Lashing Strap 50 mm - 4.0 m
search

Ratchet Lashing Strap 50 mm...

SR 504

The lashings consist of high - tensile polyester (PES) webbing with an average tension of only 4% combined with a high quality push-ratchet. They come with the mandatory bluelabel, marked with length and admissible drag force. Manufactured in accordance with DIN60060/ VDI 2701, they are controlled by the Test-and Certification Authority (Technical Expert Committee) for traffic concerning quality and safety. Other types and lengths can be supplied anytime upon request on short notice.

Pris 249,00 kr.

På fjernlager

Lashing Strap with Clamp 25 mm
search

Lashing Strap with Clamp 25...

SZK 258

Durable 25 mm wide ratchet strap with sturdy clamping fastener. Manufactured in accordance with EN 12195-2 PES. Bears the compulsory blue label with details of length, reliable lashing capacity and verification ID. Boasting a maximum lashing capacity of LC 250 daN (approx. 0.25 t), this is a secure and verified fastening system for many different applications.

Pris 109,00 kr.

På fjernlager

Ratchet Lashing Strap 50 mm - 10.0 m
search

Ratchet Lashing Strap 50 mm...

SR 5010

The lashings consist of high - tensile polyester (PES) webbing with an average tension of only 4% combined with a high quality push-ratchet. They come with the mandatory bluelabel, marked with length and admissible drag force. Manufactured in accordance with DIN60060/ VDI 2701, they are controlled by the Test-and Certification Authority (Technical Expert Committee) for traffic concerning quality and safety. Other types and lengths can be supplied anytime upon request on short notice.

Pris 389,00 kr.

På fjernlager

Lashing Strap with Clamp 25 mm
search

Lashing Strap with Clamp 25...

SZK 251

Durable 25 mm wide ratchet strap with sturdy clamping fastener. Manufactured in accordance with EN 12195-2 PES. Bears the compulsory blue label with details of length, reliable lashing capacity and verification ID. Boasting a maximum lashing capacity of LC 250 daN (approx. 0.25 t), this is a secure and verified fastening system for many different applications.

Pris 49,00 kr.

På fjernlager

Ratchet Lashing Strap 35 mm - 2.0 m
search

Ratchet Lashing Strap 35 mm...

SR 352

The lashings consist of high - tensile polyester (PES) webbing with an average tension of only 4% combined with a high quality push-ratchet. They come with the mandatory bluelabel, marked with length and admissible drag force. Manufactured in accordance with DIN60060/ VDI 2701, they are controlled by the Test-and Certification Authority (Technical Expert Committee) for traffic concerning quality and safety. Other types and lengths can be supplied anytime upon request on short notice.

Pris 149,00 kr.

På fjernlager

Lashing Strap with Clamp 25 mm
search

Lashing Strap with Clamp 25...

SZK 254

Durable 25 mm wide ratchet strap with sturdy clamping fastener. Manufactured in accordance with EN 12195-2 PES. Bears the compulsory blue label with details of length, reliable lashing capacity and verification ID. Boasting a maximum lashing capacity of LC 250 daN (approx. 0.25 t), this is a secure and verified fastening system for many different applications.

Pris 79,00 kr.

På fjernlager

Ratchet Lashing Strap 35 mm - 4.0 m
search

Ratchet Lashing Strap 35 mm...

SR 354

The lashings consist of high - tensile polyester (PES) webbing with an average tension of only 4% combined with a high quality push-ratchet. They come with the mandatory bluelabel, marked with length and admissible drag force. Manufactured in accordance with DIN60060/ VDI 2701, they are controlled by the Test-and Certification Authority (Technical Expert Committee) for traffic concerning quality and safety. Other types and lengths can be supplied anytime upon request on short notice.

Pris 189,00 kr.

På fjernlager