. Køb AdamHall hos CC ProShop (5) .
Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

AdamHall

AdamHall

Aktive filtre

  • Status: Disponibel
  • Mærker: Adam Hall 19" Parts
  • Mærker: Adam Hall Hardware
19
  • På tilbud!
  • -30,00 kr.
search

19" 3U ERGO Rack Drawer -...

87403 ALU ERGO

If you want to keep your rack tidy by storing accessories and cables conveniently and safely, ERGO has a sturdy rack drawer for tough everyday travel. The 1.5 mm aluminium rack drawer runs smoothly on ball bearing mounted telescopic rails and can be fully pulled out or completely removed.

The recessed handle lets you push and pull the drawer, and the drawer locks securely into place when closed.

Pris 899,00 kr. Normalpris 929,00 kr.

På fjernlager

19
  • På tilbud!
  • -60,00 kr.
search

19" 1U Rack Drawer - steel

87401 ECONOMYOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Economy" version of the standard 19" drawer from Adam Hall® with 2/3 extension, on ball bearing slide-in rails.

Pris 799,00 kr. Normalpris 859,00 kr.

På fjernlager

19
  • På tilbud!
  • -80,00 kr.
search

19" 2U Rack Drawer with 200...

87402 SHORTOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Standard" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.

Pris 499,00 kr. Normalpris 579,00 kr.

På fjernlager

19
  • På tilbud!
  • -150,00 kr.
search

19" 6U Rack Drawer with...

87406 STANDARDOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Standard" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.

Pris 1.499,00 kr. Normalpris 1.649,00 kr.

På fjernlager

19
  • På tilbud!
  • -70,00 kr.
search

19" 3U Rack Drawer with...

87403 ALUOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Alu" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.

Pris 1.299,00 kr. Normalpris 1.369,00 kr.

På fjernlager

19
  • På tilbud!
  • -80,00 kr.
search

19" 4U Rack Drawer with...

87404 ALU COMBILOCKOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Standard" range with combilock of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a combination lock for secure storage of the contents, a handle with latching function and is removable.

Pris 1.599,00 kr. Normalpris 1.679,00 kr.

På fjernlager

19
  • På tilbud!
  • -40,00 kr.
search

19" 1U ERGO Rack Drawer -...

87401 ERGO

The ERGO is a very affordable rackmount drawer with heavy-duty 1.5 mm steel construction and easy, ergonomic operation. It integrates a recessed pull handle that runs the width of the drawer and a convenient push-to-close, pull-to-open latching mechanism with 1,5 kg pull force. This economy rack drawer has a black semi-gloss powder coating finish and 10 kg load capacity. It features smooth-running full extension ball bearing slides with front disconnect for easy drawer removal.

Pris 399,00 kr. Normalpris 439,00 kr.

På fjernlager

19
  • På tilbud!
  • -100,00 kr.
search

19" 3U Rack Drawer with...

87403 STANDARDOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Standard" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.

Pris 999,00 kr. Normalpris 1.099,00 kr.

På fjernlager

19
  • På tilbud!
  • -70,00 kr.
search

19" 4U Rack Drawer with...

87404 STANDARDOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Standard" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.

Pris 1.099,00 kr. Normalpris 1.169,00 kr.

På fjernlager

19
  • På tilbud!
  • -30,00 kr.
search

19" 3HE Rack Drawer - steel

87403 ECONOMYOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Economy" version of the standard 19" drawer from Adam Hall® with 2/3 extension, on ball bearing slide-in rails.

Pris 899,00 kr. Normalpris 929,00 kr.

På fjernlager

19
  • På tilbud!
  • -40,00 kr.
search

19" 4U ERGO Rack Drawer -...

87404 ERGO

The ERGO is a very affordable rackmount drawer with heavy-duty 1.5 mm steel construction and easy, ergonomic operation. It integrates a recessed pull handle that runs the width of the drawer and a convenient push-to-close, pull-to-open latching mechanism with 1,5 kg pull force. This economy rack drawer has a black semi-gloss powder coating finish and 20 kg load capacity. It features smooth-running full extension ball bearing slides with front disconnect for easy drawer removal.

Pris 699,00 kr. Normalpris 739,00 kr.

På fjernlager

19
  • På tilbud!
  • -70,00 kr.
search

19" 2U Rack Drawer with...

87402 ALUOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Alu" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.

Pris 1.199,00 kr. Normalpris 1.269,00 kr.

På fjernlager

19
  • På tilbud!
  • -10,00 kr.
search

19" 2U Rack Drawer with...

87402 STANDARDOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Standard" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.

Pris 999,00 kr. Normalpris 1.009,00 kr.

På fjernlager

19
  • På tilbud!
  • -70,00 kr.
search

19" 2U ERGO Rack Drawer -...

87402 ERGO

The ERGO is a very affordable rackmount drawer with heavy-duty 1.5 mm steel construction and easy, ergonomic operation. It integrates a recessed pull handle that runs the width of the drawer and a convenient push-to-close, pull-to-open latching mechanism with 1,5 kg pull force. This economy rack drawer has a black semi-gloss powder coating finish and 20 kg load capacity. It features smooth-running full extension ball bearing slides with front disconnect for easy drawer removal.

Pris 459,00 kr. Normalpris 529,00 kr.

På fjernlager

19
search

19" LED Array Rack Light 1U...

RACK LIGHT PRO MOTION

This rack light with patented Smart Motion Sensor Technology features a strip of 18 ultra-bright white LEDs to deliver consistent illumination across the entire rack width. It is switched on by pressing and holding the power button; a motion sensor activates the LEDs. They remain lit for the period configured in the timer, and if no further movement is detected, switch automatically into sleep mode with adjustable dimmer. In this way, the energy-saving motion sensor light rack is the ideal choice for practical, adjustable rack lighting.

Pris 629,00 kr.

På fjernlager

19
search

19" Gooseneck LED Rack...

RACK LIGHT

The 87463 Ultra is a single space dimmable rack light with level memory. The dual gooseneck lamps are equipped with cold white COB LEDs providing 3 levels of illumination and flexible positioning. The 87463 Ultra is designed for both front or rear mounting and comes with a 12 volt DC power adapter.

Pris 579,00 kr.

På fjernlager

19" Gooseneck LED Rack Light | white & blue
search

19" Gooseneck LED Rack...

RACK LIGHT WHITE BLUE

The 87463 is a COB LED rack light with 1 U, dimmer controller and memory for dimmer setting.The dual gooseneck lamps are equipped with cold white blue COB LEDs and can be flexibly aligned. The 87463 can be mounted on the front or rear of racks and is supplied with a 12 V DCpower adapter.

Pris 699,00 kr.

På fjernlager

19
search

19" Gooseneck LED Rack...

RACK LIGHT COLOR

The 87463 Ultra C is a single space rack light with selectable colors and selection memory. The dual gooseneck lamps are equipped with COB LEDs providing red, green or blue plus cold or warm white illumination and flexible positioning. The 87463 Ultra C is designed for both front or rear mounting and comes with a 12 volt DC power adapter.

Pris 639,00 kr.

På fjernlager

19
search

19" LED Array Rack Light 1U...

RACK LIGHT PRO

This rack light meets the highest professional standards! Equipped with 18 ultra bright LEDs, arranged in an array, this rack light ensures a uniform light distribution over the entire width of the rack. Switching on and off is done via "push-and- hold" on a button. Also, 3 brightness levels can be adjusted with the same button.

The multi-colour version (87451PROC) offers an additional button for the colour selection _ you can choose between red, green, blue, warm white and cold white. In addition, both versions are equipped with a memory function - this means that the brightness and colour settings (for the 87451PROC) can be stored and are retained even when the device is disconnected from the power source.

The power supply is equipped with an unusually long cable (2m). Through a small cut-out on the back of the Racklight, a strain relief can be provided - thus ensuring a safe operation.

Pris 499,00 kr.

På fjernlager

19
search

19" LED Array Rack Light 1U...

RACK LIGHT PRO MOTION COLOR

This rack light with patented Smart Motion Sensor Technology features a strip of 18 ultra-bright LEDs to deliver consistent illumination across the entire rack width. It is switched on by pressing and holding the power button; a motion sensor activates the LEDs. They remain lit for the period configured in the timer, and if no further movement is detected, switch automatically into sleep mode with adjustable dimmer. In this way, the energy-saving motion sensor light rack is the ideal choice for practical, adjustable rack lighting.

Pris 729,00 kr.

På fjernlager

19
search

19" LED Array Rack Light 1U...

RACK LIGHT PRO MULTICOLOR

This rack light meets the highest professional standards! Equipped with 18 ultra bright LEDs, arranged in an array, this rack light ensures a uniform light distribution over the entire width of the rack. Switching on and off is done via "push-and- hold" on a button. Also, 3 brightness levels can be adjusted with the same button.

The multi-colour version (87451PROC) offers an additional button for the colour selection _ you can choose between red, green, blue, warm white and cold white. In addition, both versions are equipped with a memory function - this means that the brightness and colour settings (for the 87451PROC) can be stored and are retained even when the device is disconnected from the power source.

The power supply is equipped with an unusually long cable (2m). Through a small cut-out on the back of the Racklight, a strain relief can be provided - thus ensuring a safe operation.

Pris 599,00 kr.

På fjernlager

Corner for Lid Location male dark grey
search

Corner for Lid Location...

Q 4502 MDG

The EasyCase System of aluminium extrusions and interlocking plastic corners allow fast assembly of cases without the need for rivets.

Corners, extrusions and 7mm wood or plastic materials can be easily glued together or tacked, using a compressed air Tacker and 6mm double prong tacks.

EasyCase Aluminium Extrusions for 7mm material are available in mill finish or anodised (A) and EasyCase plastic corners are available in black and three shades of grey.

Slight color variations between different batches possible.

Pris 29,00 kr.

På fjernlager

Corner for Casemaker
search

Corner for Casemaker, Black

Q 4506 BLK

The EasyCase System of aluminium extrusions and interlocking plastic corners allow fast assembly of cases without the need for rivets.

Corners, extrusions and 7mm wood or plastic materials can be easily glued together or tacked, using a compressed air Tacker and 6mm double prong tacks.

EasyCase Aluminium Extrusions for 7mm material are available in mill finish or anodised (A) and EasyCase plastic corners are available in black and three shades of grey.

Slight color variations between different batches possible.

Pris 29,00 kr.

På fjernlager

Keeper Plate Steel Galvanized
search

Keeper Plate Steel Galvanized

16543

Bracket for simple attachment of lid to the flush lid system extrusion on the opposite side of the lid to the sliding latch.

Pris 29,00 kr.

På fjernlager

Protection Dish for large and medium butterfly catches
search

Protection Dish for large...

17300
  • Surface mount protection dish to be used for butterfly catches 17290C and 17250C
  • 1.5 mm steel, zinc plated
Pris 39,00 kr.

På fjernlager

Compression Latch with Hex Wrench
search

Compression Latch with Hex...

1671

Features

  • 4.5mm compression.
  • The closing process is always clockwise.
  • By turning the insert 90° the cam is first put into closed position.
  • By turning an additional 90°, the cam will be pulled towards the frame.
  • The H-dimension can be easily adjusted by the adjusting screw.
  • Vibration-proof according to DIN EN 61373.
  • IP65 according to DIN EN 60529.
  • RH / LH application.
  • A pre-assembled quarter-turn can be fitted through the cutout.

Materials

  • Housing, insert shaft and cam: zinc die, black
  • T-handle: PA, black
  • Adjusting screw and nut: steel, zinc plated
Pris 199,00 kr.

På fjernlager

Compression Latch with Wing Knob
search

Compression Latch with Wing...

1670

Features

  • 4.5mm compression.
  • The closing process is always clockwise.
  • By turning the insert 90° the cam is first put into closed position.
  • By turning an additional 90°, the cam will be pulled towards the frame.
  • The H-dimension can be easily adjusted by the adjusting screw.
  • Vibration-proof according to DIN EN 61373.
  • IP65 according to DIN EN 60529.
  • RH / LH application.
  • A pre-assembled quarter-turn can be fitted through the cutout.

Materials

  • Housing, insert shaft and cam: zinc die, black
  • T-handle: PA, black
  • Adjusting screw and nut: steel, zinc plated
Pris 199,00 kr.

På fjernlager

Lever Latch
search

Lever Latch, black

16552
  • Lever lock for service flaps, doors and drawers
  • With swing-out handle for opening.
  • Adjustable to wood thicknesses up to 18 mm.
Pris 249,00 kr.

På fjernlager

Sliding Latch
search

Sliding Latch

16540Sliding Latch System

This sliding latch system was developed especially for small panels, doors or similar applications. In doing so, we emphasized minimising the installed height of the latch system in order to cover as many areas of application as possible.

Pris 99,00 kr.

På fjernlager

Universal catch plate
search

Universal catch plate

1640 UKEEP

Universal catch plate matching with 17290C, 17290CL, 17250C und 17250CL.

Pris 19,00 kr.

På fjernlager

Butterfly Latch medium non cranked 14 mm deep padlockable - 50 stk.
search

Butterfly Latch medium non...

17280 P

Our V3, V4 and V5 Butterflies have a patented ´push-down` mechanism that lifts the hook out of the keeper plate on opening and leads it back into the dish on closing. This offers an ideal handling and minimises risk of injury and damage.

Pris 6.849,00 kr.

På fjernlager

Bag of 2 Butterfly Latch short Cranked 14 mm deep with Split Dish
search

Bag of 2 Butterfly Latch...

SPLIT-LID

The Split-Lid -Butterfly from Adam Hall makes building flight cases with split lids or hoods really easy. For one, the number of required butterflies can in many cases be reduced from four to two; also, the elaborate lid location transition is eliminated at the corners. Last but not least, there are also handling benefits, since fewer closures need to be operated.

Pris 429,00 kr.

På fjernlager

Butterfly Latch medium non cranked 12 mm deep padlockable
search

Butterfly Latch medium non...

17281 P

Our V3, V4 and V5 Butterflies have a patented ´push-down` mechanism that lifts the hook out of the keeper plate on opening and leads it back into the dish on closing. This offers an ideal handling and minimises risk of injury and damage.

Pris 149,00 kr.

På fjernlager

Butterfly Latch large with Spring lockable non cranked 14 mm deep
search

Butterfly Latch large with...

17250 LS

Large butterfly spring catch with a shallow cylinder lock in the wing, mounted in a 14 mm deep dish. Provides tidy security and a visual deterrent to would-be pilferers.

Pris 259,00 kr.

På fjernlager

Butterfly Latch small in medium Dish 9 mm deep
search

Butterfly Latch small in...

17213

Small butterfly catch mounted in 9 mm deep dish.Heavy Duty Version.

Heavy Duty version 17210

Pris 99,00 kr.

På fjernlager

Butterfly latch short cranked 14 mm deep with split dish - 40 stk.
search

Butterfly latch short...

SPLIT-LID

The Split-Lid -Butterfly from Adam Hall makes building flight cases with split lids or hoods really easy. For one, the number of required butterflies can in many cases be reduced from four to two; also, the elaborate lid location transition is eliminated at the corners. Last but not least, there are also handling benefits, since fewer closures need to be operated.

Pris 9.069,00 kr.

På fjernlager

Butterfly Latch medium with Spring non cranked 7 mm deep padlockable
search

Butterfly Latch medium with...

17292 SP

The butterfly is only 7 mm deep so that it does not protrude into the case. The mechanism, which therefore protrudes further, is protected from damage by a circumferential edge.

The closing mechanism of the butterfly is equipped with a counter pressure spring to be automatically guided out at its opening position of approx. 30º. If additional requirements arise, the closing hook can also be moved further out.

Pris 149,00 kr.

På fjernlager

Butterfly Latch medium with Spring non cranked 14 mm deep padlockable
search

Butterfly Latch medium with...

17290 SP

The closing mechanism of the butterfly is equipped with a counter pressure spring to be automatically guided out at its opening position of approx. 30º. If additional requirements arise, the closing hook can also be moved further out.

Pris 139,00 kr.

På fjernlager

Flightcase Latch cranked 9.5 mm deep
search

Flightcase Latch cranked...

CLAPLOCKLock Smarter _ the ClapLock flight case lock by Adam Hall

With the ClapLock, Adam Hall is unveiling an innovative (patent pending) solution for locking flight cases that is not only especially practical, but also extremely elegant.

It is used primarily in conference technology, in the AV sector, and in industrial applications: in short, wherever not only sound functionality, but also design plays a role. Unlike the classic "butterfly" clasp, the ClapLock opens simply and intuitively with the press of a button. Inadvertent release of the locking mechanism is virtually impossible thanks to the recessed design. It is flush with both the inside and the outside of the case. Moreover, the proven design protects the heads of the rivets against damage. Extremely simple operation and a stylish look make the ClapLock the perfect flight case lock for special demands.

Pris 199,00 kr.

På fjernlager

Butterfly Latch large with Spring lockable cranked 14 mm deep
search

Butterfly Latch large with...

17251 LS

Large spring butterfly catch with a shallow cylinder lock in the wing, mounted in a 14 mm deep dish cranked to fit flush with aluminium location. Provides tidy security and a visual deterrent to would-be pilferers.

Pris 259,00 kr.

På fjernlager

Butterfly Latch large with Spring non cranked 10 mm deep padlockable
search

Butterfly Latch large with...

17254 SP

Butterfly large, with eyelet for a padlock. The closing mechanism of the butterfly is equipped with a counter pressure spring to be automatically guided out at its opening position of approx. 30º. If required, the closing hook can also be moved further out.

Pris 179,00 kr.

På fjernlager

Butterfly Latch medium with Spring non cranked 7 mm deep
search

Butterfly Latch medium with...

17292 S

The butterfly is only 7 mm deep so that it does not protrude into the case. The mechanism, which therefore protrudes further, is protected from damage by a circumferential edge.

The closing mechanism of the butterfly is equipped with a counter pressure spring to be automatically guided out at its opening position of approx. 30º. If additional requirements arise, the closing hook can also be moved further out.

Pris 129,00 kr.

På fjernlager

Butterfly Latch medium with Spring half cranked 14 mm deep padlockable
search

Butterfly Latch medium with...

17293 SP

Medium butterfly in dish padlockable.

All large and medium butterfly latches now stop at approx. «30°» and can be fitted with a kick-out spring to automatically push them out to this point. The latch can be opened further outward if necessary.

Pris 149,00 kr.

På fjernlager

Butterfly Latch medium non cranked 14 mm deep
search

Butterfly Latch medium non...

17280

Our V3, V4 and V5 Butterflies have a patented ´push-down` mechanism that lifts the hook out of the keeper plate on opening and leads it back into the dish on closing. This offers an ideal handling and minimises risk of injury and damage.

Pris 129,00 kr.

På fjernlager

Tilbage til toppen

Mest solgte

AFMONTERINGSNØGLER BLAUPUNKT 2 STK.
search

AFMONTERINGSNØGLER...

Vægt (Emb.) 60g
Rumfang (Emb.) 0.00074025
Bredde (Emb.) 94mm
Længde (Emb.) 225mm
Højde (Emb.) 35mm
Pris 19,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.