. Køb AdamHall hos CC ProShop (4) .
Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

AdamHall

AdamHall

Aktive filtre

  • Mærker: Adam Hall Hardware
  • Mærker: Adam Hall Stands
Microphone Filter
search

Microphone Filter

RF1RF1 "Microphone Screen"for mounting behind the microphone

The RF1 is designed to help minimizing the undesirable hall reflections, noises and echos in order to obtain a very _dry_ vocal or instrumental recording signal. This filter allows good recording results even under unfavorable ambient conditions without having to take complicated measures to reproduce studio conditions or an acoustical insulation. It features a lightweight and rugged construction with high quality soundproofing materials and can be mounted on all conventional microphone stands.

The microphone holder of the RF1 is adjustable for both depth and height and thus permits excellent acoustic isolation of all types of microphones, even with large-diaphragm microphones.

Pris 1.189,00 kr.

På fjernlager

Angled 3-pin XLR Gooseneck Light with 4 COB LEDs
search

Angled 3-pin XLR Gooseneck...

SLED 1 ULTRA XLR 3 A

The SLED 1 ULTRA XLR 3 A is a matt black gooseneck light with 4 extra bright white COB LEDs and 3-pin male angled XLR plug that works on dedicated 12 volt task light and 48 volt phantom power. The 400 mm gooseneck is easily flexible yet stays put where you bend it, the power switch is conveniently located on top of the lamp.

Pris 209,00 kr.

På fjernlager

4-pin XLR Gooseneck Light with 4 COB LEDs
search

4-pin XLR Gooseneck Light...

SLED 1 ULTRA XLR 4

The SLED 1 ULTRA XLR 4 is a matte-black gooseneck light with 4 especially bright COB LEDs and a 4-pin XLR connector. It operates on either 12-volt or 48-volt phantom power. The 30 cm gooseneck is both flexible and sturdy; the on/off switch is easily accessible on the lamp head.

Pris 189,00 kr.

På fjernlager

3-pin XLR Gooseneck Light with 4 COB LEDs
search

3-pin XLR Gooseneck Light...

SLED 1 ULTRA XLR 3

The SLED 1 ULTRA XLR 3 is a matt black gooseneck light with 4 extra bright white COB LEDs and 3-pin male XLR plug that works on dedicated 12 volt task light connectors and 48 volt phantom powered mic inputs. The 300 mm gooseneck is easily flexible yet stays put where you bend it, the power switch is conveniently located on top of the lamp.

Pris 179,00 kr.

På fjernlager

BNC Gooseneck Light with 4 COB LEDs
search

BNC Gooseneck Light with 4...

SLED 1 ULTRA BNC

The SLED 1 ULTRA BNC is a matt black gooseneck light with 4 extra bright white COB LEDs and male BNC connector that works on dedicated 12 volt task light and 48 volt phantom power. The 300 mm gooseneck is easily flexible yet stays put where you bend it, the power switch is conveniently located on top of the lamp.

Pris 189,00 kr.

På fjernlager

Gooseneck Lamp
search

Gooseneck Lamp, USB...

SLED 1 ULTRA USB C

The SLED 1 ULTRA USB C is a matt black gooseneck light with 4 extra bright white COB LEDs with selectable colour and USB connector. The 300 mm gooseneck is easily flexible yet stays put where you bend it, the colour is conveniently adjustable in warm white, cold white, red, green and blue.

Pris 139,00 kr.

På fjernlager

Angled 4-pin XLR Gooseneck Light with 4 COB LEDs
search

Angled 4-pin XLR Gooseneck...

SLED 1 ULTRA XLR 4 A

The SLED 1 ULTRA XLR 4 A is a matt black gooseneck light with 4 extra bright white COB LEDs and 4-pin male angled XLR plug that works on dedicated 12 volt task light and 48 volt phantom power. The 400 mm gooseneck is easily flexible yet stays put where you bend it, the power switch is conveniently located on top of the lamp.

Pris 209,00 kr.

På fjernlager

Universal Wall mount for speakers up to 10kg black
search

Universal Wall mount for...

SUWMB 10 BWall & ceiling bracket for loudspeaker systems up to 10 kg

The SUWMB10 is fully adjustable on all axes and can be individually aligned. It is compatible with all speakers with an appropriate hole pattern or is suitable for direct installation in wood or plastic housing.

It comes with a 20 cm long steel safety cable, with which the mounted speakers can be secured against falling, in accordance with BGV-C1 § 7.

Please note:

On account of statutory regulations (BGV-C1 §7 "Protection against falling objects"), loudspeakers, in addition to being attached to a wall bracket, must be secured against falling with a device such as a wire rope.

Pris 289,00 kr.

På fjernlager

Universal Wall mount for speakers up to 10kg white
search

Universal Wall mount for...

SUWMB 10 WWall & ceiling bracket for loudspeaker systems up to 10 kg

The SUWMB10 is fully adjustable on all axes and can be individually aligned. It is compatible with all speakers with an appropriate hole pattern or is suitable for direct installation in wood or plastic housing.

It comes with a 20 cm long steel safety cable, with which the mounted speakers can be secured against falling, in accordance with BGV-C1 § 7.

Please note:

On account of statutory regulations (BGV-C1 §7 "Protection against falling objects"), loudspeakers, in addition to being attached to a wall bracket, must be secured against falling with a device such as a wire rope.

Pris 289,00 kr.

På fjernlager

Wall Mount for Speakers
search

Wall Mount for Speakers, White

SMBS 5 W

Wall mount speaker bracket with mounting pole

  • Adjustable tilt

Please note:

On account of statutory regulations (BGV-C1 §7 "Protection against falling objects"), loudspeakers, in addition to being attached to a wall bracket, must be secured against falling with a device such as a wire rope (e.g., Adam Hall S53102B or S53100).

Pris 279,00 kr.

På fjernlager

Lighting Stand T-Bar with 16 mm TV Spigot
  • På tilbud!
  • -15,00 kr.
search

Lighting Stand T-Bar with...

SLS 6 CB

This square T-bar fits onto all lighting stands with 16 mm sockets and is a direct replacement for our AH-Stand SLS6. It features 4 fixture mounting points and holds up to 25 kg evenly distributed. The 92 cm T-bar comes with a set of matted M8 x 45 mm bolts and wing nuts.

Pris 84,00 kr. Normalpris 99,00 kr.

På fjernlager

Lighting Stand
  • På tilbud!
  • -60,00 kr.
search

Lighting Stand, Medium

SLTS 09

  • Medium lighting stand with crossbeam
  • Including set of 4 screws with washer, safety disc and wing nuts
Pris 459,00 kr. Normalpris 519,00 kr.

På fjernlager

Tour Label plastic white self-adhesive 130 x 85mm
search

Tour Label plastic white...

88000

Self Adhesive Tour Label, white, laminated with protective clear foil surface. Can be easily cleaned and re-used without print fade.

Pris 69,00 kr.

På fjernlager

Tour Label plastic white self-adhesive 220 x 150mm
search

Tour Label plastic white...

88002

Self Adhesive Tour Label, white, laminated with protective clear foil surface. Can be easily cleaned and re-used without print fade.

Pris 99,00 kr.

På fjernlager

Rack Table Leg Set 75 - 78 cm
search

Rack Table Leg Set 75 - 78 cm

87990

2-Leg system with steel mounting plates, incl. holding clamps to mount inside case lid.

  • Leg with 30 mm height adjustment.
Pris 489,00 kr.

På fjernlager

Drawer Slide for Sliding Doors
search

Drawer Slide for Sliding Doors

873901

Sliding-door drawer for building a sliding door system in cases. To be mounted on the sides, top or bottom. Best used with top edge capping 6145 and sprung sliding latch 16540.

Pris 469,00 kr.

På fjernlager

Rack Stand 6 U
search

Rack Stand 6 U

STRS 6 U
  • Rack stand 6 units high
  • Black finish, drilled tapped for M5 screws
  • 12 screws included
Pris 129,00 kr.

På fjernlager

Rack Stand 12 U
  • På tilbud!
  • -20,00 kr.
search

Rack Stand 12 U

STRS 12 U

  • Rack stand 12 units high
  • Black finish, drilled tapped for M5 screws
  • 24 screws included
Pris 159,00 kr. Normalpris 179,00 kr.

På fjernlager

Corner for Lid Location male dark grey
search

Corner for Lid Location...

Q 4502 MDG

The EasyCase System of aluminium extrusions and interlocking plastic corners allow fast assembly of cases without the need for rivets.

Corners, extrusions and 7mm wood or plastic materials can be easily glued together or tacked, using a compressed air Tacker and 6mm double prong tacks.

EasyCase Aluminium Extrusions for 7mm material are available in mill finish or anodised (A) and EasyCase plastic corners are available in black and three shades of grey.

Slight color variations between different batches possible.

Pris 29,00 kr.

På fjernlager

Corner for Casemaker
search

Corner for Casemaker, Black

Q 4506 BLK

The EasyCase System of aluminium extrusions and interlocking plastic corners allow fast assembly of cases without the need for rivets.

Corners, extrusions and 7mm wood or plastic materials can be easily glued together or tacked, using a compressed air Tacker and 6mm double prong tacks.

EasyCase Aluminium Extrusions for 7mm material are available in mill finish or anodised (A) and EasyCase plastic corners are available in black and three shades of grey.

Slight color variations between different batches possible.

Pris 29,00 kr.

På fjernlager

Keeper Plate Steel Galvanized
search

Keeper Plate Steel Galvanized

16543

Bracket for simple attachment of lid to the flush lid system extrusion on the opposite side of the lid to the sliding latch.

Pris 29,00 kr.

På fjernlager

Protection Dish for large and medium butterfly catches
search

Protection Dish for large...

17300
  • Surface mount protection dish to be used for butterfly catches 17290C and 17250C
  • 1.5 mm steel, zinc plated
Pris 39,00 kr.

På fjernlager

Compression Latch with Hex Wrench
search

Compression Latch with Hex...

1671

Features

  • 4.5mm compression.
  • The closing process is always clockwise.
  • By turning the insert 90° the cam is first put into closed position.
  • By turning an additional 90°, the cam will be pulled towards the frame.
  • The H-dimension can be easily adjusted by the adjusting screw.
  • Vibration-proof according to DIN EN 61373.
  • IP65 according to DIN EN 60529.
  • RH / LH application.
  • A pre-assembled quarter-turn can be fitted through the cutout.

Materials

  • Housing, insert shaft and cam: zinc die, black
  • T-handle: PA, black
  • Adjusting screw and nut: steel, zinc plated
Pris 199,00 kr.

På fjernlager

Compression Latch with Wing Knob
search

Compression Latch with Wing...

1670

Features

  • 4.5mm compression.
  • The closing process is always clockwise.
  • By turning the insert 90° the cam is first put into closed position.
  • By turning an additional 90°, the cam will be pulled towards the frame.
  • The H-dimension can be easily adjusted by the adjusting screw.
  • Vibration-proof according to DIN EN 61373.
  • IP65 according to DIN EN 60529.
  • RH / LH application.
  • A pre-assembled quarter-turn can be fitted through the cutout.

Materials

  • Housing, insert shaft and cam: zinc die, black
  • T-handle: PA, black
  • Adjusting screw and nut: steel, zinc plated
Pris 199,00 kr.

På fjernlager

Lever Latch
search

Lever Latch, black

16552
  • Lever lock for service flaps, doors and drawers
  • With swing-out handle for opening.
  • Adjustable to wood thicknesses up to 18 mm.
Pris 249,00 kr.

På fjernlager

Sliding Latch
search

Sliding Latch

16540Sliding Latch System

This sliding latch system was developed especially for small panels, doors or similar applications. In doing so, we emphasized minimising the installed height of the latch system in order to cover as many areas of application as possible.

Pris 99,00 kr.

På fjernlager

Universal catch plate
search

Universal catch plate

1640 UKEEP

Universal catch plate matching with 17290C, 17290CL, 17250C und 17250CL.

Pris 19,00 kr.

På fjernlager

Butterfly Latch medium non cranked 14 mm deep padlockable - 50 stk.
search

Butterfly Latch medium non...

17280 P

Our V3, V4 and V5 Butterflies have a patented ´push-down` mechanism that lifts the hook out of the keeper plate on opening and leads it back into the dish on closing. This offers an ideal handling and minimises risk of injury and damage.

Pris 6.849,00 kr.

På fjernlager

Bag of 2 Butterfly Latch short Cranked 14 mm deep with Split Dish
search

Bag of 2 Butterfly Latch...

SPLIT-LID

The Split-Lid -Butterfly from Adam Hall makes building flight cases with split lids or hoods really easy. For one, the number of required butterflies can in many cases be reduced from four to two; also, the elaborate lid location transition is eliminated at the corners. Last but not least, there are also handling benefits, since fewer closures need to be operated.

Pris 429,00 kr.

På fjernlager

Butterfly Latch medium non cranked 12 mm deep padlockable
search

Butterfly Latch medium non...

17281 P

Our V3, V4 and V5 Butterflies have a patented ´push-down` mechanism that lifts the hook out of the keeper plate on opening and leads it back into the dish on closing. This offers an ideal handling and minimises risk of injury and damage.

Pris 149,00 kr.

På fjernlager

Butterfly Latch large with Spring lockable non cranked 14 mm deep
search

Butterfly Latch large with...

17250 LS

Large butterfly spring catch with a shallow cylinder lock in the wing, mounted in a 14 mm deep dish. Provides tidy security and a visual deterrent to would-be pilferers.

Pris 259,00 kr.

På fjernlager

Butterfly Latch small in medium Dish 9 mm deep
search

Butterfly Latch small in...

17213

Small butterfly catch mounted in 9 mm deep dish.Heavy Duty Version.

Heavy Duty version 17210

Pris 99,00 kr.

På fjernlager

Butterfly latch short cranked 14 mm deep with split dish - 40 stk.
search

Butterfly latch short...

SPLIT-LID

The Split-Lid -Butterfly from Adam Hall makes building flight cases with split lids or hoods really easy. For one, the number of required butterflies can in many cases be reduced from four to two; also, the elaborate lid location transition is eliminated at the corners. Last but not least, there are also handling benefits, since fewer closures need to be operated.

Pris 9.069,00 kr.

På fjernlager

Butterfly Latch medium with Spring non cranked 7 mm deep padlockable
search

Butterfly Latch medium with...

17292 SP

The butterfly is only 7 mm deep so that it does not protrude into the case. The mechanism, which therefore protrudes further, is protected from damage by a circumferential edge.

The closing mechanism of the butterfly is equipped with a counter pressure spring to be automatically guided out at its opening position of approx. 30º. If additional requirements arise, the closing hook can also be moved further out.

Pris 149,00 kr.

På fjernlager

Butterfly Latch medium with Spring non cranked 14 mm deep padlockable
search

Butterfly Latch medium with...

17290 SP

The closing mechanism of the butterfly is equipped with a counter pressure spring to be automatically guided out at its opening position of approx. 30º. If additional requirements arise, the closing hook can also be moved further out.

Pris 139,00 kr.

På fjernlager

Flightcase Latch cranked 9.5 mm deep
search

Flightcase Latch cranked...

CLAPLOCKLock Smarter _ the ClapLock flight case lock by Adam Hall

With the ClapLock, Adam Hall is unveiling an innovative (patent pending) solution for locking flight cases that is not only especially practical, but also extremely elegant.

It is used primarily in conference technology, in the AV sector, and in industrial applications: in short, wherever not only sound functionality, but also design plays a role. Unlike the classic "butterfly" clasp, the ClapLock opens simply and intuitively with the press of a button. Inadvertent release of the locking mechanism is virtually impossible thanks to the recessed design. It is flush with both the inside and the outside of the case. Moreover, the proven design protects the heads of the rivets against damage. Extremely simple operation and a stylish look make the ClapLock the perfect flight case lock for special demands.

Pris 199,00 kr.

På fjernlager

Butterfly Latch large with Spring lockable cranked 14 mm deep
search

Butterfly Latch large with...

17251 LS

Large spring butterfly catch with a shallow cylinder lock in the wing, mounted in a 14 mm deep dish cranked to fit flush with aluminium location. Provides tidy security and a visual deterrent to would-be pilferers.

Pris 259,00 kr.

På fjernlager

Butterfly Latch large with Spring non cranked 10 mm deep padlockable
search

Butterfly Latch large with...

17254 SP

Butterfly large, with eyelet for a padlock. The closing mechanism of the butterfly is equipped with a counter pressure spring to be automatically guided out at its opening position of approx. 30º. If required, the closing hook can also be moved further out.

Pris 179,00 kr.

På fjernlager

Butterfly Latch medium with Spring non cranked 7 mm deep
search

Butterfly Latch medium with...

17292 S

The butterfly is only 7 mm deep so that it does not protrude into the case. The mechanism, which therefore protrudes further, is protected from damage by a circumferential edge.

The closing mechanism of the butterfly is equipped with a counter pressure spring to be automatically guided out at its opening position of approx. 30º. If additional requirements arise, the closing hook can also be moved further out.

Pris 129,00 kr.

På fjernlager

Butterfly Latch medium with Spring half cranked 14 mm deep padlockable
search

Butterfly Latch medium with...

17293 SP

Medium butterfly in dish padlockable.

All large and medium butterfly latches now stop at approx. «30°» and can be fitted with a kick-out spring to automatically push them out to this point. The latch can be opened further outward if necessary.

Pris 149,00 kr.

På fjernlager

Tilbage til toppen

Mest solgte

AFMONTERINGSNØGLER BLAUPUNKT 2 STK.
search

AFMONTERINGSNØGLER...

Vægt (Emb.) 60g
Rumfang (Emb.) 0.00074025
Bredde (Emb.) 94mm
Længde (Emb.) 225mm
Højde (Emb.) 35mm
Pris 19,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.