Cage Nut M6 for 3 mm - 100...
- Cage nut M6 for 6150 (aluminium rear rail punched)
På lager
.
Filtrer efter
Status
Selections
Mærker
Pris
19,00 kr. - 69.529,00 kr.
Der er 917 varer.
Aktive filtre
På lager
Windscreen for LDWS100MH1 Headset Microphone
På lager
To extend a speakON cable, you need a straight-through adapter, as the two ends of the cable always consist of female connectors and it is not possible to plug them together as with XLR cables, for example. For this purpose, you can get the NL8MMXX from Neutrik (R), for example. The adapter is made of sturdy die-cast zinc and comes with two male sockets and is only suitable for 8-pole speakON. This adapter is also available for the 4-pole version.
På fjernlager
Dynamic handheld microphone for LD Systems ROADBUDDY 6
På fjernlager
Available in three versions operating in the 554 - 586 MHz, 662 - 694 MHz or 823 - 832 MHz & 863 - 865 MHz frequency bands, the U500® conference microphone base sports a combination power and mute switch, high contrast OLED display, adjustable gain and a 130 Hz low cut filter to eliminate low frequency rumble. It provides a 3-pin XLR input for the U 500® Gooseneck Conference Microphone (sold separately, item no. LDU500GM530CC).
På fjernlager
Available in three versions operating in the 554 - 586 MHz, 662 - 694 MHz or 823 - 832 MHz & 863 - 865 MHz frequency bands, the U500® conference microphone base sports a combination power and mute switch, high contrast OLED display, adjustable gain and a 130 Hz low cut filter to eliminate low frequency rumble. It provides a 3-pin XLR input for the U 500® Gooseneck Conference Microphone (sold separately, item no. LDU500GM530CC).
På fjernlager
Available in three versions operating in the 554 - 586 MHz, 662 - 694 MHz or 823 - 832 MHz & 863 - 865 MHz frequency bands, the U500® conference microphone base sports a combination power and mute switch, high contrast OLED display, adjustable gain and a 130 Hz low cut filter to eliminate low frequency rumble. It provides a 3-pin XLR input for the U 500® Gooseneck Conference Microphone (sold separately, item no. LDU500GM530CC).
På fjernlager
Providing a 70 Hz - 18 kHz frequency response, the U 500 Conference Microphone features a cardioid back-electret condenser capsule on a 45.6 cm gooseneck with luminous ring and 3-pin XLR connector. It requires the U 500 microphone base (sold separately, item no. , LDU505CST, LDU506CST, or LDU508CST).
På fjernlager
We have developed the U500® in Germany to meet all of your requirements of a wireless conference system. It offers a professionally equipped solution for effective communication and interaction with advanced technology, excellent speech intelligibility and an elegant appearance. The user-friendly True Diversity UHF system with 60 channels in 6 groups facilitates easier installations and turns conferences, meetings and round tables into successful events.
The U500® terminals feature a gooseneck condenser microphone with cardioid characteristic and a light ring to display status. The heavy table stand features an XLR microphone input, 28 V phantom power, an on-off-mute switch, as well as a gain control and a selectable 130 Hz high-pass filter to effectively reduce proximity effect and structure-borne sound. A high-contrast OLED display shows radio frequency, battery status, terminal number, group and channel. The audio transmission range is 60 Hz - 16 kHz.
For simple, fast configuration, the 4-channel U500® conference system receiver features automatic frequency and channel scanning, infrared synchronisation, a digital encoder and 4 buttons to directly access the individual channels. The high-contrast OLED display provides a comprehensive overview of all functions and settings such as audio and radio signal strength, and priority and battery status of the terminals. The number of simultaneously-live microphones can be configured in order to eliminate crosstalk, feedback and comb filter effects. Selectable automatic or manual gate settings and a pilot tone ensure that the U500® conference system delivers superb sound quality with excellent noise immunity. In addition to its individual channel outputs, the receiver also has a master output, an access lock to prevent unauthorised adjustment of settings, and the RS-232 interface to facilitate integration into external control systems.
For system expansion, up to five U500® receivers can be cascaded and used in master-slave mode, making a maximum of 20 terminals possible. The U500® conference system is available in three versions which work in the following frequency areas: 554 - 586 MHz, 662 - 694 MHz or 823 - 832 MHz + 863 - 865 MHz
På fjernlager
We have developed the U500® in Germany to meet all of your requirements of a wireless conference system. It offers a professionally equipped solution for effective communication and interaction with advanced technology, excellent speech intelligibility and an elegant appearance. The user-friendly True Diversity UHF system with 60 channels in 6 groups facilitates easier installations and turns conferences, meetings and round tables into successful events.
The U500® terminals feature a gooseneck condenser microphone with cardioid characteristic and a light ring to display status. The heavy table stand features an XLR microphone input, 28 V phantom power, an on-off-mute switch, as well as a gain control and a selectable 130 Hz high-pass filter to effectively reduce proximity effect and structure-borne sound. A high-contrast OLED display shows radio frequency, battery status, terminal number, group and channel. The audio transmission range is 60 Hz - 16 kHz.
For simple, fast configuration, the 4-channel U500® conference system receiver features automatic frequency and channel scanning, infrared synchronisation, a digital encoder and 4 buttons to directly access the individual channels. The high-contrast OLED display provides a comprehensive overview of all functions and settings such as audio and radio signal strength, and priority and battery status of the terminals. The number of simultaneously-live microphones can be configured in order to eliminate crosstalk, feedback and comb filter effects. Selectable automatic or manual gate settings and a pilot tone ensure that the U500® conference system delivers superb sound quality with excellent noise immunity. In addition to its individual channel outputs, the receiver also has a master output, an access lock to prevent unauthorised adjustment of settings, and the RS-232 interface to facilitate integration into external control systems.
For system expansion, up to five U500® receivers can be cascaded and used in master-slave mode, making a maximum of 20 terminals possible. The U500® conference system is available in three versions which work in the following frequency areas: 554 - 586 MHz, 662 - 694 MHz or 823 - 832 MHz + 863 - 865 MHz
På fjernlager
We have developed the U500® in Germany to meet all of your requirements of a wireless conference system. It offers a professionally equipped solution for effective communication and interaction with advanced technology, excellent speech intelligibility and an elegant appearance. The user-friendly True Diversity UHF system with 60 channels in 6 groups facilitates easier installations and turns conferences, meetings and round tables into successful events.
The U500® terminals feature a gooseneck condenser microphone with cardioid characteristic and a light ring to display status. The heavy table stand features an XLR microphone input, 28 V phantom power, an on-off-mute switch, as well as a gain control and a selectable 130 Hz high-pass filter to effectively reduce proximity effect and structure-borne sound. A high-contrast OLED display shows radio frequency, battery status, terminal number, group and channel. The audio transmission range is 60 Hz - 16 kHz.
For simple, fast configuration, the 4-channel U500® conference system receiver features automatic frequency and channel scanning, infrared synchronisation, a digital encoder and 4 buttons to directly access the individual channels. The high-contrast OLED display provides a comprehensive overview of all functions and settings such as audio and radio signal strength, and priority and battery status of the terminals. The number of simultaneously-live microphones can be configured in order to eliminate crosstalk, feedback and comb filter effects. Selectable automatic or manual gate settings and a pilot tone ensure that the U500® conference system delivers superb sound quality with excellent noise immunity. In addition to its individual channel outputs, the receiver also has a master output, an access lock to prevent unauthorised adjustment of settings, and the RS-232 interface to facilitate integration into external control systems.
For system expansion, up to five U500® receivers can be cascaded and used in master-slave mode, making a maximum of 20 terminals possible. The U500® conference system is available in three versions which work in the following frequency areas: 554 - 586 MHz, 662 - 694 MHz or 823 - 832 MHz + 863 - 865 MHz
På fjernlager
The LDSUB10A is a very compact and powerful 10" subwoofer and a genuine multitalent that can be used as an additional bass cabinet in conjunction with full-range speakers (Stinger 8" or Stinger 10") and is also suitable for permanent installations.
This subwoofer features an integrated 3-channel power amplifier (3 x 120 W RMS), thus permitting connection of additional passive full-range speakers or installation speakers such as those in the LD SAT series.
Possible combinations for permanent installations:
På fjernlager
The Contractor CIWS 52 is an elegant wall speaker for installation in walls. It is equipped with a 5.25" woofer and 1.42" tweeter that feature a frequency response up to 20 kHz and provide high speech intelligibility and a straight sound. The CIWS 52 achieves a sound pressure level of 88 dB at 1 W / 1 m with a power capacity of 40 watts of continuous power. Stable swivels allow for easy, secure installation. The in-wall speaker is designed for a wide scope of applications, providing a discreet sound in hotels, restaurants, bars, lounges, training and conference rooms, shopping centres and at home.
For ELA systems, the CIWS 52 is available as a 100 Volt version (CIWS 52 100 V) with three taps for 6, 12, and 24 watts.
På fjernlager
The LD Systems SAT442G² is an extremely slim installation monitor that can be unobtrusively integrated into almost any environment.
The elegant column design of the SAT442G² achieves a smooth balanced 120° horizontal dispersion with a focused 30° vertical directivity and a maximum sound pressure of 114 db. Four 4" custom-made woofers and a 1" compression driver from Celestion provide a balanced playback with a frequency response of 75 Hz to 20 kHz; spring terminals are used as connection. For a powerful, deep bass extension, we recommend the subwoofer installation series from LD Systems.
The rugged cabinet of the SAT442G², featuring a durable textured coating, is made of 12 mm MDF and is available in black or white. M6 inserts and an included universal joint mount (LDSATWMB10B) provide a wide range of possibilities for mounting.
På fjernlager
The LD Systems SAT42G2 is an ultracompact 2-way speaker that is suitable for smaller installations and unobtrusive integration in practically any surroundings, e.g., in bars and restaurants, retail shops or even at home.
A balanced sound with a 60° x 60° dispersion angle and a maximum sound-level pressure of 103dB is ensured by the 4" custom woofers and a 1_ silk dome tweeter with wave guide. The impedance of 16 ohms permits parallel operation of eight SAT42G2 speakers on 2 ohms. For a deeper bass foundation with powerful drive, the subwoofers in the LD installation series are the ideal addition.
The cabinet with a rugged textured coatingis made of 12 mm MDF and is available in black and white. M6 inserts and an included mounting bracket provide varied possibilities for mounting; a universal joint mount is available as an accessory. It is connected via spring terminals.
På fjernlager
With its slim, streamlined design, the LD Systems SAT 262 G2 is excellently suited for permanent installation and discreet integration in virtually any setting. It features two 6.5" custom woofers and a 1_ Celestion compression driver connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 262 G2 attains a maximum sound-level pressure of 116 dB over a frequency response curve of 65_19 kHz with a permanent load capacity of 180 watts. The reflex casing made of 12 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 262 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).
På fjernlager
^
The closed design of the sleek, compact speaker is loaded with 4" custom woofers and a 1_ silk dome tweeter with wave guide, which provide for a maximum sound-level pressure of 108 dB. The LD SAT242G2 is rated for 100 W RMS power can can be used alone as a full-range speaker or with a subwoofer in the in the LD installation series for bass expansion.
The cabinet of the SAT242G2 is made of 12mm MDF with a durable textured finish and is available in black and white. It is connected via spring terminals. M6 inserts and an included mounting bracket provide numerous possibilities for mounting; a universal joint mount is available as an accessory.
På fjernlager
^
The closed design of the sleek, compact speaker is loaded with 4" custom woofers and a 1_ silk dome tweeter with wave guide, which provide for a maximum sound-level pressure of 108 dB. The LD SAT242G2 is rated for 100 W RMS power can can be used alone as a full-range speaker or with a subwoofer in the in the LD installation series for bass expansion.
The cabinet of the SAT242G2 is made of 12mm MDF with a durable textured finish and is available in black and white. It is connected via spring terminals. M6 inserts and an included mounting bracket provide numerous possibilities for mounting; a universal joint mount is available as an accessory.
På fjernlager
The LD Systems SAT62AG2 is the active version of the SAT62G2. The compact 2-way speaker is not only suitable for installation, but also as a home studio monitor and for other sound reinforcement tasks.
The bass-reflex design is loaded with a 6.5" custom woofer and a 1_ silk dome tweeter with wave guide, which are driven by a Class AB power amplifier with 50 W RMS power and overcurrent protection. The input is a XLR-jack combo socket, an XLR socket permits looping through of the signal. Reproduction is balanced and dynamic throughout the frequency range of 55 Hz - 20 kHz and attains a maximum sound-level pressure of 108 dB. The SAT62AG2 features a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The 12 mm MDF cabinet with a durable textured coating is available in black and white and equipped with M6 rigging points. An included mounting bracket offers additional possibilities for mounting; a universal joint mount is available as an accessory.
På fjernlager
The LD Systems SAT42G2 is an ultracompact 2-way speaker that is suitable for smaller installations and unobtrusive integration in practically any surroundings, e.g., in bars and restaurants, retail shops or even at home.
A balanced sound with a 60° x 60° dispersion angle and a maximum sound-level pressure of 103dB is ensured by the 4" custom woofers and a 1_ silk dome tweeter with wave guide. The impedance of 16 ohms permits parallel operation of eight SAT42G2 speakers on 2 ohms. For a deeper bass foundation with powerful drive, the subwoofers in the LD installation series are the ideal addition.
The cabinet with a rugged textured coatingis made of 12 mm MDF and is available in black and white. M6 inserts and an included mounting bracket provide varied possibilities for mounting; a universal joint mount is available as an accessory. It is connected via spring terminals.
På fjernlager
The LD Systems SAT62AG2 is the active version of the SAT62G2. The compact 2-way speaker is not only suitable for installation, but also as a home studio monitor and for other sound reinforcement tasks.
The bass-reflex design is loaded with a 6.5" custom woofer and a 1_ silk dome tweeter with wave guide, which are driven by a Class AB power amplifier with 50 W RMS power and overcurrent protection. The input is a XLR-jack combo socket, an XLR socket permits looping through of the signal. Reproduction is balanced and dynamic throughout the frequency range of 55 Hz - 20 kHz and attains a maximum sound-level pressure of 108 dB. The SAT62AG2 features a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The 12 mm MDF cabinet with a durable textured coating is available in black and white and equipped with M6 rigging points. An included mounting bracket offers additional possibilities for mounting; a universal joint mount is available as an accessory.
På fjernlager
With its slim, streamlined design, the LD Systems SAT 262 G2 is excellently suited for permanent installation and discreet integration in virtually any setting. It features two 6.5" custom woofers and a 1_ Celestion compression driver connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 262 G2 attains a maximum sound-level pressure of 116 dB over a frequency response curve of 65_19 kHz with a permanent load capacity of 180 watts. The reflex housing is made of 12 mm MDF and is equipped with four M8 mounting holes. A speakON-compatible socket and a terminal block provide input options, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 262 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).
På fjernlager
The LD Systems SAT62G2 is an extremely compact, dependable 2-way speaker for numerous installation applications. It blends unobtrusively into practically any surroundings, e.g., in bars and restaurants, retail shops or even at home.
The bass-reflex design with a 6.5" custom woofer and a 1_ silk dome tweeter with wave guide provides for powerful and sonorous reproduction throughout a frequency range of 55 Hz - 20 kHz with a sound-level pressure of up to 108 dB. Thus the SAT62G2 is suitable for full-range operation and as a satellite in conjunction with a subwoofer from the LD installation series. It has a RMS power rating of 80 W. The impedance of 16 ohms permits parallel operation of eight SAT62G2 speakers on 2 ohms.
The 12 mm MDF cabinet with a rugged textured coating is available in black and white. The included mounting bracket and M6 rigging points offer extensive possibilities for mounting; a universal joint mount is available as an accessory. It is connected via spring terminals.
På fjernlager
The LD Systems SAT62G2 is an extremely compact, dependable 2-way speaker for numerous installation applications. It blends unobtrusively into practically any surroundings, e.g., in bars and restaurants, retail shops or even at home.
The bass-reflex design with a 6.5" custom woofer and a 1_ silk dome tweeter with wave guide provides for powerful and sonorous reproduction throughout a frequency range of 55 Hz - 20 kHz with a sound-level pressure of up to 108 dB. Thus the SAT62G2 is suitable for full-range operation and as a satellite in conjunction with a subwoofer from the LD installation series. It has a RMS power rating of 80 W. The impedance of 16 ohms permits parallel operation of eight SAT62G2 speakers on 2 ohms.
The 12 mm MDF cabinet with a rugged textured coating is available in black and white. The included mounting bracket and M6 rigging points offer extensive possibilities for mounting; a universal joint mount is available as an accessory. It is connected via spring terminals.
På fjernlager
The LD Systems SAT442G² is an extremely slim installation monitor that can be unobtrusively integrated into almost any environment.
The elegant column design of the SAT442G² achieves a smooth balanced 120° horizontal dispersion with a focused 30° vertical directivity and a maximum sound pressure of 114 db. Four 4" custom-made woofers and a 1" compression driver from Celestion provide a balanced playback with a frequency response of 75 Hz to 20 kHz; spring terminals are used as connection. For a powerful, deep bass extension, we recommend the subwoofer installation series from LD Systems.
The rugged cabinet of the SAT442G², featuring a durable textured coating, is made of 12 mm MDF and is available in black or white. M6 inserts and an included universal joint mount (LDSATWMB10W) provide a wide range of possibilities for mounting.
På fjernlager
With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 10 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.
The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.
På fjernlager
With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 8 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.
The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.
På fjernlager
With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 15 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.
The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.
På fjernlager
With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 12 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.
The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.
På fjernlager
Polished stainless steel screw with fitting washer for multi-purpose use such as for hanging speaker systems or attaching safety ropes. Also suitable for full-range loudspeakers from the LD Systems Series.
På fjernlager
As the proud owner of an FX 300 effects pedal, you want it to last for as long as possible. The matching padded bag will protect it from getting scratched during the day-to-day touring use.
This bag does so much more though: its water-resistant 1680D nylon protects your FX 300 from splashing water during transport, and there is an extra compartment for the power supply unit so that you always have it by your side and neatly tucked away.
You can also easily carry cables or other accessories in the large inside pocket. Have fun and enjoy using the FX 300 for a long time!
På fjernlager
To make sure you always have the right and necessary power for your FX 300, we highly recommend its suitable power supply - FX 300 PS.
It runs center-negative at 9V DC / 500 mA and features a common 2.1 mm plug with negative tip and positive shaft.
På fjernlager
For extending network cables, you need an adapter or straight-through-coupling. As this adapter is of course also a component of the set-up, you should use a plug for Cat.6a connections that can also pass on this bandwidth.
We now offer the Cat.6a coupling from Neutrik® for this purpose. Very light, very small and compact. Perfect fit for any adapter case.
På fjernlager
etherCON RJ45 feedthrough coupler for cable extensions
På fjernlager
powerCON NAC3MPA-1 (power in) - powerCON NAC3MPB-1 (power out), coupler for linking cables
The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!
På fjernlager
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Hand tool for tightening the socket of the powerCON TRUE1 TOP, FXX and speakON FXX series.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
The G-shaped rubber sealing cap protects the powerCON TRUE1 TOP built-in connectors NAC3FPX* from dust and water in accordance with protection class IP65. User-friendly and easy to install, the compact frame enables a high packing density on the housing.
På fjernlager
The SCNAC-04 rubber sealing caps with two caps (power-in / power-out) protect the powerCON TRUE1 TOP built-in connectors NAC3PX-TOP against dust and water in accordance with protection class IP65. The compact frame is user-friendly, easy to install and enables a high packing density on the housing.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Colored coding rings with labeling block. Insert must not be unsoldered to change ring.
Box of 100 pcs.
På fjernlager
The D-shaped rubber sealing cap protects the powerCON TRUE1 TOP NAC3MPX* and powerCON 20A NAC3MPXXA* and NAC3MPA-* against dust and water in accordance with protection class IP 65. The compact frame is user-friendly, easy to install and enables a high packing density.
På fjernlager
Colored marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series) Easy handling as the insert does not have to be desoldered to change the ring.
Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Colored coding rings. Insert must not be unsoldered to change the color coding. Box of 100 pcs.
På fjernlager
Colored marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series) Easy handling as the insert does not have to be desoldered to change the ring.
Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Colored marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series) Easy handling as the insert does not have to be desoldered to change the ring.
Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Colored marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series) Easy handling as the insert does not have to be desoldered to change the ring.
Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series)
Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Phillips-head Screw with Nut for XLR Sockets
På fjernlager
The cable connector protection for pre-assembled RJ45 cable connectors consists of a black chrome-plated housing, stop washer, collet chuck, clamping sleeve and kink protection. It is supplied with two kink protection elements for cable diameters up to 5 mm or 8 mm. An RJ45 cable connector is not included in the scope of delivery.
The etherCON cable connector protection upgrades a conventional RJ45 connector to an extremely robust and lockable solution.
Attention! Not compatible with the CAT6 panel jacks NE8FDY-C6 and NE8FDY-C6-B.
På fjernlager
Vægt (Emb.) | 60g |
Rumfang (Emb.) | 0.00074025 |
Bredde (Emb.) | 94mm |
Længde (Emb.) | 225mm |
Højde (Emb.) | 35mm |
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.