LD Systems Rackmount Kit...
This kit allows mounting a half-rack U300 Receiver into a standard 19" rack.
På lager
.
Filtrer efter
Status
Selections
Mærker
Pris
9,00 kr. - 69.529,00 kr.
Der er 875 varer.
Aktive filtre
This kit allows mounting a half-rack U300 Receiver into a standard 19" rack.
På lager
The low-capacitance U500 Series instrument cable with a rugged, highly flexible sheath for optimal signal transmission and 100% trouble-free operation are shielded and fitted with a 6.3 mm Rean® Neutrik jack plug and a 3-pin female mini XLR plug.
På lager
Antenna Split Box 4-way for all types of wireless microphone systems working in a range between 500 and 900 MHz.
På lager
Developed in Germany, the UHF diversity wireless systems from the U300® series deliver excellent audio performance. They achieve a range of 100 metres in ideal conditions and are available in five frequency bands: 584_608 MHz, 655_679 MHz, 823_832 MHz + 863_865 MHz, 470_490 MHz or 514_542 MHz. Up to six U300® systems can be used simultaneously in each frequency band. Convenient one-touch synchronisation via infrared ensures fast, problem-free wireless connection between the transmitter and receiver, while a squelch with pilot tone ensures disruption-free operation.
U300® transmitters have a 10 mW output and an operating time of 10 hours on two AA batteries. The handheld microphone_s frequency response ranges from 55 Hz to 16 KHz. With a lower cut-off frequency of 25 Hz, the bodypack is also suitable for transmitting 5-string bass guitars with a deep H string. The bodypack_s input level can be adjusted to both active and passive guitars and basses over three levels. The power switch features a handy standby mode for temporary muting. The U300® receiver is fitted with a bright LCD channel display, an LED chain for displaying audio signal strength and both two balanced XLR and two unbalanced 6.35 mm audio outputs. The audio output can also be switched to instrument level for directly connecting to guitar and bass amplifiers.
The U300® Series wireless systems have a fresh, modern look and are available with receivers and two cardioid dynamic handheld microphones (HHD2) or with two bodypacks and two headsets (BPH2). The microphone characteristic can be changed using U500®-series replaceable heads.
På lager
U506 BPH 2
The U500® Series vocal sets were developed in Germany to bring you affordable professional technology and sound quality. The radio systems for vocals and speech deliver impressive performance and high reliability, which will certainly exceed your expectations. We have designed the range specifically for professional users to ensure that your performance is an impressive and emotional experience.
Selectable transmit power up to 30 mW provides the U500® vocal sets with a free-field range of over 100 metres. They are available in three frequency bands: 584 - 608 MHz and 655 - 679 MHz, where 12 systems can be operated simultaneously, and 823 - 832 MHz + 863 - 865 MHz, where six systems can be operated at the same time. The True Diversity UHF wireless systems are equipped with an automatic scan facility to find the best free frequency, and convenient one-touch infrared synchronisation of transmitter and receiver to facilitate easy set up.
High-contrast OLED displays provide an excellent overview of functions, with indicators for group, channel, radio frequency, and signal strength and battery status. You can even enter individual usernames. In addition to the squelch function, the transmitter_s silent pilot tone ensures fail-safe operation. It protects against interference and mutes the receiver if signals without this tone are present. The U500®_s efficient technology and high-quality components provide clear, distortion-free transmission without latency or artefacts. Low power consumption means that the transmitter can run for up to 10 hours with 2 x AA batteries.
The U500® Series vocal sets are available with hand-held transmitters, headsets, lavalier microphones and single or double receivers. The hand-held transmitters feature interchangeable microphone capsules to suit singing or speaking.
Overview of frequency ranges of vocal sets:
På lager
U305 BPH
Developed in Germany, the UHF diversity wireless systems from the U300® series deliver excellent audio performance. They achieve a range of 100 metres in ideal conditions and are available in five frequency bands: 584_608 MHz, 655_679 MHz, 823_832 MHz + 863_865 MHz, 470_490 MHz or 514_542 MHz. Up to six U300® systems can be used simultaneously in each frequency band. Convenient one-touch synchronisation via infrared ensures fast, problem-free wireless connection between the transmitter and receiver, while a squelch with pilot tone ensures disruption-free operation.
U300® transmitters have a 10 mW output and an operating time of 10 hours on two AA batteries. The handheld microphone_s frequency response ranges from 55 Hz to 16 KHz. With a lower cut-off frequency of 25 Hz, the bodypack is also suitable for transmitting 5-string bass guitars with a deep H string. The bodypack_s input level can be adjusted to both active and passive guitars and basses over three levels. The power switch features a handy standby mode for temporary muting. The U300® receiver is fitted with a bright LCD channel display, an LED chain for displaying audio signal strength and both a balanced XLR and an unbalanced 6.35 mm audio output. The audio output can also be switched to instrument level for directly connecting to guitar and bass amplifiers.
U300®-series wireless systems feature a fresh, modern design and are available as vocal sets with receiver and dynamic handheld microphone with cardioid characteristic, bodypack and headset or bodypack and lavalier microphone. The microphone characteristic can be changed using U500®-series replaceable heads. U300® instrument sets are available with bodypack and clip-on microphone for wind instruments or a double-shielded low-capacitance cable for guitars and basses.
På lager
LS SUPER TB 01
If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this, such as the LS 331 B from Gravity. However, if you install a standard T-bar, the combination appears clumsy and oversized. You don't need a clavilux, just two spots.
The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm, it blends seamlessly into any environment, even museums and galleries. Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into position, removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However, despite its slimline elegance, there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two, extra spigot inserts can be installed in the additional mounting holes.
As you are probably already aware, ergonomic locking screws, interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly.
På lager
LS TBTV 28
The GLSTBTV28 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. The unbreakable height adjustment collars are made of steel for additional strength and feature safety pins to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberized T-Joint _ making the T-Bar not only easier to handle and carry but also look better than regular stands.
På lager
SWU 400 T
The SWU400T is an affordable lighting stand that features convenient height adjustment by means of a hand crank. Thanks to its high load bearing capacity of 85 kg, the removable crossbar, and the upper tube with a diameter of 35 mm, the SWU400T is also suitable for use as a speaker stand.
The sturdy steel construction has a black powder-coated finish; the upper tube and extensions are galvanized. A levelling foot ensures secure positioningof the wind up stand even on uneven surfaces. All adjustable elements are secured with spring bolts in addition to the tommy screws. The SWU400T weighs 19.7 kg and is extendable from a minimum height of 190.5 cm to a maximum of 4m.
På lager
SP 2332 TPB
The SP 2332 TPB is a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 105 to 140 cm. The SP 2332 TPB features an M20 bottom end and steel collar with safety pin to securely lock the extension pole in place. The base tube is a two-piece assembly that can be unscrewed to result in an amazingly short transport length of 54 cm only.
På lager
MIC BAG M
Universal protection and storage bag for corded microphones.
The light universal bag provides ideal protection and convenient storage for your microphones. Though compact in size, it is large enough to hold up to two microphones or accessories, such as microphone clips, spare capsules and microphone cables.
Made of durable and flexible neoprene, the bag is neat, functional and elegant in design. It is closed by means of a continuous zip fastener.
På lager
ICOA 15 A BT
This full-range loudspeaker impresses with its outstanding sound, even at low frequencies. The ICOA 15 A BT by LD Systems is a genuine all-rounder that offers unparalleled features for its class. Its coaxial design, rotating, BEM-optimised CD horn and extensive and precisely calibrated DynX DSP presets make this aktive 15" loudspeaker exceptionally flexible.
The outstanding bass reproduction from the horn-loaded woofer makes the LD ICOA 15 A BT the ideal choice for musicians, bands, entertainers and dance schools. It also allows DJs to play sets without the need for a subwoofer. Deployed vertically, the speaker impresses as a satellite; horizontally, it's excellent in suspended systems or as a floor monitor. The efficient class-D power amplifier delivers 128 dB max. SPL and 1200 W peak performance.
Drawing on DynX DSP technology by LD Systems, the speaker delivers perfect performance with maximum clarity and power under all conditions. 4 presets, a 3-band EQ and a delay function facilitate optimal adjustment of the sound to the venue conditions. The 2 line/mic input channels with individual gain controllers, plus mono mix output, allow a variety of signal sources to be connected. The BT version offers Bluetooth® streaming and the wireless connection of playback devices - ideal for playing content from a phone or tablet.
Thanks to its shock-resistant front grille and ideal 55° tilt angle, the LD ICOA 15 A BT is also outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment.
Extensive and smart accessories for installation and transport are optionally available. 4 aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.
På lager
HP HWMB 01 B
This wall-mount hanger lets you put your headphones in easy reach. It features two convenient slots to keep your headphone cables neat and tidy.
På lager
SLED 2 PRO
The SLED2Pro is a compact, handy light with a patented design intended for music stands. The 4 bright and efficient LEDs can be switched individually between 2 brightness levels. Also, the light cone is adjustable thanks to the flexible 220 mm long goosenecks.
Due to its long operating time, it is also suitable as a mobile reading lamp and multifunctional clip light for all lighting needs at home and on the go.
På lager
The MS 4322 HD is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height.
It sports a heavy duty leg collar of die-cast zinc and three weighted folding legs of solid steel with hefty rubber caps for surface protection.
The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4322 HD sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.
A set of black coding rings is included with the MS 4322 HD, additional ring packs are available in a wide array of colors for instant personalization.
På lager
SP 3332 B
The SP 3332 B is a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 82 to 140 cm. The SP 3332 B features a 35 mm bottom end and steel collar with set screw and safety pin to lock the extension pole in place. It comes with a convenient rubber retainer to secure the safety pin during transport.
På lager
DEEP2 600
The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products.
The DEEP2 series features a Clip Limiter as well as every common protection circuits. These amps are 2 Ohm and 4 Ohm (bridge) stable in continuous operation. On the rear panel you will find all the common In- and Outputs.
The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design.
The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
På lager
SP 3202
The Gravity GSP 3202 studio monitor stand has a heavy, triangular cast iron base. And the monitor tray is 250 mm x 250 mm in size with foam pads for damping. It is height-adjustable from 930 mm to 1500 mm for optimum speaker positioning and comes with a set of spikes. Mounted to the integrated large rubber feet, they achieve an effective coupling to the floor.
På lager
SS 5211 B SET 1
This set includes two Gravity GSP5211B tripod speaker stands and the padded heavy duty GBGSS2B carry bag for convenient, easy transport.
På lager
ICOA 12 A BT
This full-range loudspeaker impresses with its outstanding sound, even at low frequencies. The ICOA 12 A BT by LD Systems is a genuine all-rounder that offers unparalleled features for its class. Its coaxial design, rotating, BEM-optimised CD horn and extensive and precisely calibrated DynX DSP presets make this powered 12" loudspeaker exceptionally flexible.
The outstanding bass reproduction from the horn-loaded woofer makes the LD ICOA 12 A BT the ideal choice for musicians, bands, entertainers and dance schools. It also allows DJs to play sets without the need for a subwoofer. Deployed vertically, the speaker impresses as a satellite; horizontally, it's excellent in suspended systems or as a floor monitor. The efficient class-D power amplifier delivers 126 dB max. SPL and 1200 W peak performance.
Drawing on DynX DSP technology by LD Systems, the speaker delivers perfect performance with maximum clarity and power under all conditions. 4 presets, a 3-band EQ and a delay function facilitate optimal adjustment of the sound to the venue conditions. The 2 line/mic input channels with individual gain controllers, plus mono mix output, allow a variety of signal sources to be connected. The BT version offers Bluetooth® streaming and the wireless connection of playback devices - ideal for playing content from a phone or tablet.
Thanks to its shock-resistant front grille and ideal 55° tilt angle, the LD ICOA 12 A BT is also outstanding as a floor monitor. Placed vertically, the 36 mm dual tilt stand attachment offers the choice of a 0° or 5° tilt angle for optimally adapting the system to the local acoustic environment.
Extensive and smart accessories for installation and transport are optionally available. 4 aluminium handles with an ergonomic rubber surface provide optimal grip when carrying the speaker.
På lager
SLTS 017
På lager
BG SS 1 XLB
The BGSS 1 XLB is a heavy duty speaker stand bag with 10 mm padding that holds a single stand. The bag is made from tough 1680D nylon that is water repellent and easy to clean. The bottom and all other points of stress are reinforced for extra strength, two carry straps with comfortable wrap-around handle and the heavy gauge single pull zipper closure of the lid provide handling convenience.
På lager
LDI 02
Active DI box in a sturdy metal housing (aluminium/steel) with protective corners, silver-blue metallic, internal battery (9 V flashes during operation) is switched off automatically when phantom power is used (LED permanently illuminated),
extremely low battery consumption. Battery: 9 V block (not included).
På lager
U506 MD
På lager
ICOA 15 PC
This padded protective cover is made of durable, water-repellent 1680D nylon and lined 8mm thick to protect the ICOA speaker. The handle cut-outs are reinforced at the edges and are covered by a flap with Velcro fastener. A practical outside pocket offers plenty of space for accessories.
På lager
SLS 6
På lager
Universal guitar stand for acoustic and electric guitars with soft padding.
På lager
SOLO-G ACOUSTIC
With its Solo-G series Gravity introduces three new stands for acoustic and classical guitars, for electric and bass guitars and a universal design that accommodates most body shapes. The A-frame stands are made of heavy-duty steel tubing with black powder coating finish, soft rubber backrest and TPU support arm padding to protect the instrument's finish and nonslip rubber feet. Providing two splay angle options, the tilt back Solo-G design folds up to compact dimensions nicely for easy portability.
*Not suitable for long-term use with guitars that have a nitro lacquer finish.
På lager
SA VESA 1
This universal bracket is suitable for all flat screen monitors with VESA standard mounting hole patterns from 75 x 75 to 400 x 400 and securely clamps to 35 mm speaker poles. The heavy duty steel construction with black powder coating finish has a maximum load capacity of 30 kg and comes complete with sets of M8 and M6 monitor mounting screws.
På lager
The MS 4322 is a premium microphone stand which features heavy-duty construction, powder coating and a maximum height of 169 cm. The extremely stable base features a zinc die-cast bell and generously proportioned, precision-folding steel legs with durable rubber caps to protect surfaces.
The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick-release adjuster enables variable extension to a maximum length of 88 cm, facilitating flexible microphone placement. The smooth yet robust height adjustment grip and screw knobs of the MS 4322 are made from highly durable ABS with a non-slip, soft-touch thermoplastic coating for comfortable use. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.
An additional set of black coding rings is included with the MS 4322; more ring packs are available in a wide array of colours for instant personalisation.
På lager
D 1006
Professional dynamic microphone with On/Off switch. Very robust construction and excellent value-for-money. 4,5 m XLR male / XLR female cable included.
På lager
BG KS 1 B
This lightweight carry bag protects your keyboard stand from dust and scratches during transport and storage. It is made of durable, water-repellent neoprene fabric and features a rugged two-way zipper for easy access.
På lager
This metal body coaxial adapter permits connecting a TNC plug to a BNC jack.
På lager
This padded protective cover is made of durable, water-repellent 1680D nylon and lined 8mm thick to protect the ICOA speaker. The handle cut-outs are reinforced at the edges and are covered by a flap with Velcro fastener. A practical outside pocket offers plenty of space for accessories.
På lager
U506 R2
We have developed the U500® Series and incorporated some of your suggestions to provide sophisticated and affordable wireless systems that are tailored to suit the needs of professional users. Whether for voice, instruments or as a wireless conference system, sets from the U500® Series will meet your expectations of quality sound, reliability and ease of operation.
With automatic channel scanning, convenient infrared synchronisation, intuitive menu navigation and an easily-readable OLED display featuring battery status indicator and user name assignment, the U500® Series True Diversity UHF radio systems are ready to use in an instant. The selectable transmit power of up to 30 mW and squelch control with pilot tone ensure optimum audio and transmission quality without artefacts and a free-field range of over 100 m.
Interchangeable microphone capsules enable the hand-held transmitter to be tailored to suit different speaking or singing voices. For direct connection to guitar and bass amps, the outputs of the single and double receiver are switchable to instrument level. The wide frequency range of 30 - 16,000 Hz also handles the lowest bass notes.
U500® vocal and instrument sets are available in three frequency bands: 584 - 608 MHz and 655 - 679 MHz, where 12 systems can be operated simultaneously, and 823 - 832 MHz + 863 - 865 MHz, where six systems can be operated at the same time.
The U500® conference system can be extended to a maximum of 20 terminals and provides effective communication with excellent speech intelligibility.
På lager
The LDSATWMB10 is fully adjustable on all axes and can therefore be individually aligned. It is compatible with all SAT G2 speakers, Dave 8 and DAVE 10 G4X satellites. But is also suitable for direct installation in the wood or plastic housing of other speakers.
It comes with a 20 cm long steel safety cable, with which the mounted speakers can be secured against falling, in accordance with BGV-C1 § 7.
Note:
Under the statutory provisions (BGV C1 § 7 "Protection against falling objects") speakers must additionally be secured for attachment to a wall bracket by means of a steel rope, for example.
På lager
Light, easy-to-wear, beige-coloured headset condenser microphone with 3-pin mini XLR connector
På lager
U506 BP
We have developed the U500® Series and incorporated some of your suggestions to provide sophisticated and affordable wireless systems that are tailored to suit the needs of professional users. Whether for voice, instruments or as a wireless conference system, sets from the U500® Series will meet your expectations of quality sound, reliability and ease of operation.
With automatic channel scanning, convenient infrared synchronisation, intuitive menu navigation and an easily-readable OLED display featuring battery status indicator and user name assignment, the U500® Series True Diversity UHF radio systems are ready to use in an instant. The selectable transmit power of up to 30 mW and squelch control with pilot tone ensure optimum audio and transmission quality without artefacts and a free-field range of over 100 m.
Interchangeable microphone capsules enable the hand-held transmitter to be tailored to suit different speaking or singing voices. For direct connection to guitar and bass amps, the outputs of the single and double receiver are switchable to instrument level. The wide frequency range of 30 - 16,000 Hz also handles the lowest bass notes.
U500® vocal and instrument sets are available in three frequency bands: 584 - 608 MHz and 655 - 679 MHz, where 12 systems can be operated simultaneously, and 823 - 832 MHz + 863 - 865 MHz, where six systems can be operated at the same time.
The U500® conference system can be extended to a maximum of 20 terminals and provides effective communication with excellent speech intelligibility.
På lager
The castor board for the DDQ SUB 18 and DAVE 18 G3 subwoofer and the GT SUB 18A is equipped with high-quality wheels from Adam Hall, which ensure smooth and quiet running. With the help of the brake and 2 locking wheels, safe manoeuvring and installation are made easy. 2 milled slots allow for easy carrying. The platform of the castor board is made of sturdy birch.
På lager
We have developed the U500® Series and incorporated some of your suggestions to provide sophisticated and affordable wireless systems that are tailored to suit the needs of professional users. Whether for voice, instruments or as a wireless conference system, sets from the U500® Series will meet your expectations of quality sound, reliability and ease of operation.
With automatic channel scanning, convenient infrared synchronisation, intuitive menu navigation and an easily-readable OLED display featuring battery status indicator and user name assignment, the U500® Series True Diversity UHF radio systems are ready to use in an instant. The selectable transmit power of up to 30 mW and squelch control with pilot tone ensure optimum audio and transmission quality without artefacts and a free-field range of over 100 m.
Interchangeable microphone capsules enable the hand-held transmitter to be tailored to suit different speaking or singing voices. For direct connection to guitar and bass amps, the outputs of the single and double receiver are switchable to instrument level. The wide frequency range of 30 - 16,000 Hz also handles the lowest bass notes.
U500® vocal and instrument sets are available in three frequency bands: 584 - 608 MHz and 655 - 679 MHz, where 12 systems can be operated simultaneously, and 823 - 832 MHz + 863 - 865 MHz, where six systems can be operated at the same time.
The U500® conference system can be extended to a maximum of 20 terminals and provides effective communication with excellent speech intelligibility.
På lager
WS 100 MH 1Headset Microphone for WS 100, WS 1000, WS 1616 and WS ECO Series
På lager
The spacious universal bag by LD measures 30 x 30 cm, offering plenty of space for diverse storage options. It also provides ideal protection for your equipment from soiling, damp and damage. The bag holds up to ten microphones as well as various accessories such as microphone clips, cables and other equipment.
Made of durable and flexible neoprene, it is neat, functional and elegant in design. The bag is closed with a robust, continuous zip fastener. A separating web divides the interior to protect the equipment.
A removable strap keeps your hands free while carrying the bag and also serves as a convenient hanger.
På lager
Windscreen for LDWS100MH1 Headset Microphone
På lager
Dynamic handheld microphone for LD Systems ROADBUDDY 6
På fjernlager
WB 431 B
This large heavy steel base for M20 poles provides a firm footing and three female threads that allow you to mount extra weights off centre. Two integrated handles facilitate transport while felt- covered feet prevent scratches and marks on the floor.
På fjernlager
XSP 1057
Additional clip to expand the Gravity VARI®-G guitar stand series
På fjernlager
WB 123 WPB
Adding 5 kg extra weight for increased stability this cast iron plate installs to our speaker pole base part no. GWB123B without the need for tools.
På fjernlager
In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.
With the VARI®-ARM M 14, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from an action cam to a mobile recorder - almost anywhere and in any direction in a matter of seconds.
The VARI®-ARM M 14 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position. Its main feature: Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM M 14 is held tight and safe.
Both ends of the VARI®-ARM M 14 have 1/4" threads on which you can attach almost any camera, handheld recorder or smartphone holder on the market. You can then screw the VARI®-ARM to a Super Clamp with a 1/4" mount and fix your equipment to a truss in the studio or on stage.
As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM M 14's usability.
På fjernlager
In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.
With the VARI®-ARM L TV, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from microphone clamps to super clamps and lighting equipment - almost anywhere and in any direction in a matter of seconds.
The VARI®-ARM L TV is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position. Its main feature: Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM L TV is held tight and safe.
Perfect for truss mountingBoth ends of the VARI®-ARM L TV have a 16 mm TV spigot for attaching the VARI®-ARM to a Super Clamp. You can unscrew the two TV16 spigots. This frees up a 1/4" thread to which you can attach a microphone clamp, pop filter and more.
As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM L TV's usability.
På fjernlager
In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.
With the VARI®-ARM M 38, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from a microphone clamp to a tablet or an action cam - almost anywhere and in any direction in a matter of seconds.
The VARI®-ARM M 38 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position. Its main feature: Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM M 38 is held tight and safe. Thanks to the 3-kilogram load capacity, you can even mount a DSLM camera including a standard lens or a heavyweight microphone such as the broadcast classic RE-20.
There is a 3/8" thread at the head of the VARI®-ARM for you to screw on a microphone clip, a pop filter and more. The included adapter (3/8" to 1/4" reduction thread) gives you complete flexibility, allowing you to use almost any camera, handheld recorder or smartphone mount on the market with the VARI®- ARM M 38. Thanks to the solid clamp at the bottom of the VARI®-ARM and its large clamping range from 15 to 35 mm, the VARI®-ARM can also be easily attached to most tables and poles (e.g. to tripods). The clamp can also be unscrewed to reveal a 3/8" thread for mounting the VARI®-ARM onto other equipment.
As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM M 38's usability.
På fjernlager
In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.
With the VARI®-ARM L 38, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from a microphone clamp to a tablet or an action cam - almost anywhere and in any direction in a matter of seconds.
The VARI®-ARM L 38 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position.
Its main feature:Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM L 38 is held tight and safe. The included adapter (3/8" to 1/4" reduction thread) gives you complete flexibility, allowing you to use almost any camera, handheld recorder or smartphone mount on the market with the VARI®- ARM L 38.
Thanks to the solid clamp at the bottom of the VARI®-ARM and its large clamping range from 15 to 35 mm, the VARI®-ARM can also be easily attached to most tables and poles (e.g. to tripods). The clamp can also be unscrewed to reveal a 3/8" thread for mounting the VARI®-ARM onto other equipment.
As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM L 38's usability.
På fjernlager
Available in three versions operating in the 554 - 586 MHz, 662 - 694 MHz or 823 - 832 MHz & 863 - 865 MHz frequency bands, the U500® conference microphone base sports a combination power and mute switch, high contrast OLED display, adjustable gain and a 130 Hz low cut filter to eliminate low frequency rumble. It provides a 3-pin XLR input for the U 500® Gooseneck Conference Microphone (sold separately, item no. LDU500GM530CC).
På fjernlager
Available in three versions operating in the 554 - 586 MHz, 662 - 694 MHz or 823 - 832 MHz & 863 - 865 MHz frequency bands, the U500® conference microphone base sports a combination power and mute switch, high contrast OLED display, adjustable gain and a 130 Hz low cut filter to eliminate low frequency rumble. It provides a 3-pin XLR input for the U 500® Gooseneck Conference Microphone (sold separately, item no. LDU500GM530CC).
På fjernlager
Available in three versions operating in the 554 - 586 MHz, 662 - 694 MHz or 823 - 832 MHz & 863 - 865 MHz frequency bands, the U500® conference microphone base sports a combination power and mute switch, high contrast OLED display, adjustable gain and a 130 Hz low cut filter to eliminate low frequency rumble. It provides a 3-pin XLR input for the U 500® Gooseneck Conference Microphone (sold separately, item no. LDU500GM530CC).
På fjernlager
Providing a 70 Hz - 18 kHz frequency response, the U 500 Conference Microphone features a cardioid back-electret condenser capsule on a 45.6 cm gooseneck with luminous ring and 3-pin XLR connector. It requires the U 500 microphone base (sold separately, item no. , LDU505CST, LDU506CST, or LDU508CST).
På fjernlager
We have developed the U500® in Germany to meet all of your requirements of a wireless conference system. It offers a professionally equipped solution for effective communication and interaction with advanced technology, excellent speech intelligibility and an elegant appearance. The user-friendly True Diversity UHF system with 60 channels in 6 groups facilitates easier installations and turns conferences, meetings and round tables into successful events.
The U500® terminals feature a gooseneck condenser microphone with cardioid characteristic and a light ring to display status. The heavy table stand features an XLR microphone input, 28 V phantom power, an on-off-mute switch, as well as a gain control and a selectable 130 Hz high-pass filter to effectively reduce proximity effect and structure-borne sound. A high-contrast OLED display shows radio frequency, battery status, terminal number, group and channel. The audio transmission range is 60 Hz - 16 kHz.
For simple, fast configuration, the 4-channel U500® conference system receiver features automatic frequency and channel scanning, infrared synchronisation, a digital encoder and 4 buttons to directly access the individual channels. The high-contrast OLED display provides a comprehensive overview of all functions and settings such as audio and radio signal strength, and priority and battery status of the terminals. The number of simultaneously-live microphones can be configured in order to eliminate crosstalk, feedback and comb filter effects. Selectable automatic or manual gate settings and a pilot tone ensure that the U500® conference system delivers superb sound quality with excellent noise immunity. In addition to its individual channel outputs, the receiver also has a master output, an access lock to prevent unauthorised adjustment of settings, and the RS-232 interface to facilitate integration into external control systems.
For system expansion, up to five U500® receivers can be cascaded and used in master-slave mode, making a maximum of 20 terminals possible. The U500® conference system is available in three versions which work in the following frequency areas: 554 - 586 MHz, 662 - 694 MHz or 823 - 832 MHz + 863 - 865 MHz
På fjernlager
We have developed the U500® in Germany to meet all of your requirements of a wireless conference system. It offers a professionally equipped solution for effective communication and interaction with advanced technology, excellent speech intelligibility and an elegant appearance. The user-friendly True Diversity UHF system with 60 channels in 6 groups facilitates easier installations and turns conferences, meetings and round tables into successful events.
The U500® terminals feature a gooseneck condenser microphone with cardioid characteristic and a light ring to display status. The heavy table stand features an XLR microphone input, 28 V phantom power, an on-off-mute switch, as well as a gain control and a selectable 130 Hz high-pass filter to effectively reduce proximity effect and structure-borne sound. A high-contrast OLED display shows radio frequency, battery status, terminal number, group and channel. The audio transmission range is 60 Hz - 16 kHz.
For simple, fast configuration, the 4-channel U500® conference system receiver features automatic frequency and channel scanning, infrared synchronisation, a digital encoder and 4 buttons to directly access the individual channels. The high-contrast OLED display provides a comprehensive overview of all functions and settings such as audio and radio signal strength, and priority and battery status of the terminals. The number of simultaneously-live microphones can be configured in order to eliminate crosstalk, feedback and comb filter effects. Selectable automatic or manual gate settings and a pilot tone ensure that the U500® conference system delivers superb sound quality with excellent noise immunity. In addition to its individual channel outputs, the receiver also has a master output, an access lock to prevent unauthorised adjustment of settings, and the RS-232 interface to facilitate integration into external control systems.
For system expansion, up to five U500® receivers can be cascaded and used in master-slave mode, making a maximum of 20 terminals possible. The U500® conference system is available in three versions which work in the following frequency areas: 554 - 586 MHz, 662 - 694 MHz or 823 - 832 MHz + 863 - 865 MHz
På fjernlager
We have developed the U500® in Germany to meet all of your requirements of a wireless conference system. It offers a professionally equipped solution for effective communication and interaction with advanced technology, excellent speech intelligibility and an elegant appearance. The user-friendly True Diversity UHF system with 60 channels in 6 groups facilitates easier installations and turns conferences, meetings and round tables into successful events.
The U500® terminals feature a gooseneck condenser microphone with cardioid characteristic and a light ring to display status. The heavy table stand features an XLR microphone input, 28 V phantom power, an on-off-mute switch, as well as a gain control and a selectable 130 Hz high-pass filter to effectively reduce proximity effect and structure-borne sound. A high-contrast OLED display shows radio frequency, battery status, terminal number, group and channel. The audio transmission range is 60 Hz - 16 kHz.
For simple, fast configuration, the 4-channel U500® conference system receiver features automatic frequency and channel scanning, infrared synchronisation, a digital encoder and 4 buttons to directly access the individual channels. The high-contrast OLED display provides a comprehensive overview of all functions and settings such as audio and radio signal strength, and priority and battery status of the terminals. The number of simultaneously-live microphones can be configured in order to eliminate crosstalk, feedback and comb filter effects. Selectable automatic or manual gate settings and a pilot tone ensure that the U500® conference system delivers superb sound quality with excellent noise immunity. In addition to its individual channel outputs, the receiver also has a master output, an access lock to prevent unauthorised adjustment of settings, and the RS-232 interface to facilitate integration into external control systems.
For system expansion, up to five U500® receivers can be cascaded and used in master-slave mode, making a maximum of 20 terminals possible. The U500® conference system is available in three versions which work in the following frequency areas: 554 - 586 MHz, 662 - 694 MHz or 823 - 832 MHz + 863 - 865 MHz
På fjernlager
The LDSUB10A is a very compact and powerful 10" subwoofer and a genuine multitalent that can be used as an additional bass cabinet in conjunction with full-range speakers (Stinger 8" or Stinger 10") and is also suitable for permanent installations.
This subwoofer features an integrated 3-channel power amplifier (3 x 120 W RMS), thus permitting connection of additional passive full-range speakers or installation speakers such as those in the LD SAT series.
Possible combinations for permanent installations:
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.