. Gravity Wall-Mount Headphones Hanger .
Gravity Wall-Mount Headphones Hanger
search
  • Gravity Wall-Mount Headphones Hanger
  • Gravity Wall-Mount Headphones Hanger
  • Gravity Wall-Mount Headphones Hanger
  • Gravity Wall-Mount Headphones Hanger
  • Gravity Wall-Mount Headphones Hanger

Gravity Wall-Mount Headphones Hanger

99,00 kr.
Inkl. moms

HP HWMB 01 B

This wall-mount hanger lets you put your headphones in easy reach. It features two convenient slots to keep your headphone cables neat and tidy.

Antal
Sidste elementer på lager

Ref: GHPHWMB01B

  • Steel mounting plate with plastic hanger
  • Holds 1-2 headphones or headsets
  • 2 convenient cable slots

Product type Headphone Holder
Material Plastic
Material Steel
Mounting Wall
Color Black
Support width 60 mm
Deck depth 100 mm
Gravity
GHPHWMB01B
3 Varer

Specifikke referencer

12 andre varer i den samme kategori:

Gravity Headphones Stand
search

Gravity Headphones Stand

HP HTT 01 B

Designed for both home and professional use, this elegant table-top headphones stand securely holds up to two large sets of headphones. Convenient slots on the holder facilitate convenient and tidy routing and storage of cables or ear buds. The stand features a die-cast aluminium base and tower construction, whereby the holder itself is made of plastic with a rubberised finish.

Pris 239,00 kr.

På fjernlager

LD Systems Phono Preamplifier and Equalizer
search

LD Systems Phono...

PPA 2

The LD Systems PPA 2 is a very compact analogue phono preamplifier, which equalises the extremely low output signal of conventional turntables to RIAA standards. It allows you to connect to devices without any phono input, such as mixers, PA power amplifiers or sound cards.

The phono inputs are designed as RCA jacks, just like the line outputs; the PPA 2 also has a screw terminal for the ground conductor of the turntable and a 6.3 mm stereo jack for connecting a headset. The THD factor of the preamplifier is below 0.05% and the channel separation is -75 dB.

The LD Systems PPA 2 uses a 12 V AC adapter; a bright LED indicates the power supply on the top of the sturdy metal chassis.

Pris 289,00 kr.

På fjernlager

LD Systems Professional In-Ear Headphones black
search

LD Systems Professional...

IEHP 1

The LDIEHP1 is an extremely light, professional in-ear monitor with a broad frequency response range and a clean, balanced sound. It is very well shielded against extraneous noise and comes with three different sets of tips to fit practically any pair of ears perfectly. Additional convenience is ensured by a generously long, 1.5m-long cable. A gold-plated mini-TRS plug provides for a reliable connection.

Pris 399,00 kr.

På fjernlager

Gravity Microphone Stand Headphones-Mount Hanger
search

Gravity Microphone Stand...

HP HMS 01 B

This hanger clamps to any mic stand to put your headphones in easy reach. It features two convenient slots to keep your headphone cables neat and tidy, and the plastic set screw tip protects the stand's finish.

Pris 99,00 kr.

På fjernlager

LD Systems Amplifier for headphones and wired IEM
search

LD Systems Amplifier for...

HPA 1

The LD Systems HPA 1 is a versatile headphone amplifier with high power output for stage, studio and home recording and is the perfect solution for wired in-ear-monitoring.. The compact device in a rugged, ergonomically shaped plastic housing with soft-touch surface and practical belt clip is very extensively equipped.

In addition to locking XLR connectors for the stereo signal L/R input, the HPA 1 has a balanced 3.5 mm stereo jack as AUX input, which can be used in parallel for clicks or playback. It is protected for safe operation against excessive input levels; a hollow pin socket with negative internal contact enables the connection of a network adapter for fixed operation.

A 3.5 mm stereo jack is provided as earphone and headphone output. Volume level and balance can be set with easy-grip knobs, a push-button switches between the summed mono and stereo signals. A full-fledged limiter is integrated for distortion-free playback and as protection against feedback.

The LD Systems HPA 1 has bi-colour LEDs to facilitate the features overview, which displays the response of the limiter during peaks and the battery status. At 165 grams, the headphone amplifier is distinctly light-weight and can be operated for up to 12 hours thanks to a high quality 9 V block battery.

Pris 939,00 kr.

På fjernlager

LD Systems 19" Headphone Amplifier 6-Channel
search

LD Systems 19" Headphone...

HPA 6LDHPA6 6-Channel Rackmount Headphone Amplifier

The LD Systems HPA 6 is a highly flexible 1U 19_ rack format headphone amplifier with 6 fully independent channels and comprehensive features for a wide range of professional audio monitoring applications.

Each channel provides a 6.3 mm TRS headphone output on the front panel with level control, mono/stereo switching, discrete left/right muting and a 6.3 mm TRS Aux input with Main/Aux balance control for mixing in further signal sources. Four-segment LED meters permit visual output level monitoring, and two 6.3 mm TRS outputs per channel on the rear allow for connecting a total of 18 headphones.

The HPA 6's main section features a master level control with eight-segment LED metering and 6.3 mm TRS input to mix in an additional source with all channels. The rear panel provides the main stereo inputs on balanced XLR and 6.3 mm TRS connectors and stereo outputs for daisy chaining multiple units.

Pris 1.859,00 kr.

På fjernlager

Gravity Desk-Mount Headphones Hanger
search

Gravity Desk-Mount...

HP HTC 01 B

This hanger clamps to any desk with 5 to 45 mm thickness to put your headphones in easy reach. It features two convenient slots to keep your headphone cables neat and tidy, and the plastic set screw tip protects your desk's finish.

Pris 109,00 kr.

På fjernlager

LD Systems Professional In-Ear Headphones
search

LD Systems Professional...

IE HP 2

A good monitor sound in which not only the musician who plays the loudest can be heard clearly, but also your own voice and instrument, is the basis for an excellent performance. Modern in-ear monitoring systems offer a wonderful solution for optimal stage sound. They also help reduce the high volume levels that musicians' ears are often subjected to both on stage and in rehearsal rooms. The IE HP 2 is an extremely light, professional stereo in-ear headphone that boasts a wide transmission range and a clear, balanced sound.

The dynamic driver transmits distortion-free, harmonic frequencies ranging between 20 and 18,000 Hz. The optimised earpiece design ensures maximum environmental sound suppression. Thanks to the silicon and foam design that comes included in three sizes, the IE HP 2 offers maximum shielding and optimal wearing comfort for almost any ear. Its low weight of just 16 grams guarantees comfortable in-ear wear, even over extended periods. And for those who move a lot on the stage, the removable (and exchangeable) 1.55 m cable offers maximum freedom of movement. Once a performance is over, the IE HP 2 in-ear headphone can be safely stored in the included transport case until it is needed again.

Pris 929,00 kr.

På fjernlager

LD Systems Carry case for in-ear headphones
search

LD Systems Carry case for...

IE POCKET

This durable, lightweight carry case is designed for storing and transporting your in-ear headphones. The rigid outer shell with soft fleece lining provides solid protection from impact, scratches and dust. The case features an internal mesh pocket for ear tips and other accessories, a sturdy zip closure and detachable carabiner belt clip.

Pris 59,00 kr.

På fjernlager

Palmer Reference Class Headphone Amplifier - 1-Channel
search

Palmer Reference Class...

HDA 02The PHDA02 - a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes.

In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono mode, the left and right channels are summed, and the resulting mono signal is fed to both the left and right earphones. Again, volume is governed by the Stereo/Left control. In Dual Mono mode, the left and right channels can be used independently with individual level controls for the left and right earphones.

The PHDA02 operates with all headphones with an impedance of 8 up to 200 Ohms. Impedance matching is achieved by a specially designed switchable transformer. Uncommon and costly, this solution provides superior performance, dynamic range, and signal- to-noise ratio at all loads.

Combo input sockets allow for balanced XLR and unbalanced TS headphone connection while parallel XLR outputs facilitate daisy chaining multiple units. The integrated power supply operates with mains from 100 VAC to 240 VAC.

The PHDA02 is equipped with low-noise op amps, and the output amplifiers' discrete power transistors are mounted on heatsinks. Dimensions are 1 U 9.5".

Pris 4.249,00 kr.

På fjernlager

LD Systems Headphone Amplifier 4-channel
search

LD Systems Headphone...

HPA 4LD Sytems HPA 4 - a compact and powerful headphone amplifier

The LDHPA4 has small dimensions, can handle up to 4 headphones and has an output power with no equal in its class. That means high volume with no distortion. With these features the LDHPA4 is an essential tool for every project- and home studio.

Pris 469,00 kr.

På lager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.