. Brand (20) .
Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

Brand

Brand

Aktive filtre

LD Systems Padded protective cover for MON 10 A G3
search

LD Systems Padded...

MON 10 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 10 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 619,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 8 A G3
search

LD Systems Padded...

MON 8 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 8 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 559,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 15 A G3
search

LD Systems Padded...

MON 15 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 15 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 749,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 12 A G3
search

LD Systems Padded...

MON 12 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 12 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 649,00 kr.

På fjernlager

LD Systems Ring Screw Stainless Steel M8 x 30 mm Incl. Washer
search

LD Systems Ring Screw...

5430 M8

Polished stainless steel screw with fitting washer for multi-purpose use such as for hanging speaker systems or attaching safety ropes. Also suitable for full-range loudspeakers from the LD Systems Series.

Pris 49,00 kr.

På fjernlager

Screw M8 x 16 with Gear Rim
search

Screw M8 x 16 with Gear...

54M8X16

Galvanized screw with integrated gear rim and washer for easy mounting of substructure rollers.

Pris 169,00 kr.

På fjernlager

Screw M8 x 20 with Gear Rim
search

Screw M8 x 20 with Gear...

54M8X20

Galvanized screw with integrated gear rim and washer for easy mounting of substructure rollers.

Pris 179,00 kr.

På fjernlager

Bralo Pop-Rivet Multigrip 4.8 x 10.5 mm - 250 stk.
search

Bralo Pop-Rivet Multigrip...

55914811

The Bralo Multigrip blind rivet is synonymous with for adaptability and reliability.

This blind rivet is a fixing system for connecting two parts of the same or different materials, of which only one needs to be accessible. BRALO© blind rivets provide a robust and secure solution for a wide range of fixing system requirements. They have been designed to fulfill the highest quality standards and also to withstand the most demanding ambient conditions.

This is a fixing element made of an aluminium alloy, capable of covering a large clamping area. This means that you can use only one type of rivet to replace several standard rivets and reduce storage costs at the same time.

Due to the special wide fastening properties on the blind side, the load and torque forces are evenly distributed.

The Bralo Multigrip blind rivet provides a uniform riveting process, a robust and high-quality fixing which is resistant to dynamic influences.

Can be used to connect different materials such as metal to metal, aluminium, steel, stainless steel, metal to plastic or plastic to plastic Other rivet versions for special applications and requirements available in the shop.

Pris 129,00 kr.

På fjernlager

Bralo Pop-Rivet Multigrip 4.8 x 15.0 mm - 250 stk.
search

Bralo Pop-Rivet Multigrip...

55914815

The Bralo Multigrip blind rivet is synonymous with for adaptability and reliability.

This blind rivet is a fixing system for connecting two parts of the same or different materials, of which only one needs to be accessible. BRALO© blind rivets provide a robust and secure solution for a wide range of fixing system requirements. They have been designed to fulfill the highest quality standards and also to withstand the most demanding ambient conditions.

This is a fixing element made of an aluminium alloy, capable of covering a large clamping area. This means that you can use only one type of rivet to replace several standard rivets and reduce storage costs at the same time.

Due to the special wide fastening properties on the blind side, the load and torque forces are evenly distributed.

The Bralo Multigrip blind rivet provides a uniform riveting process, a robust and high-quality fixing which is resistant to dynamic influences.

Can be used to connect different materials such as metal to metal, aluminium, steel, stainless steel, metal to plastic or plastic to plastic Other rivet versions for special applications and requirements available in the shop.

Pris 149,00 kr.

På fjernlager

Gravity Mounting/ Rack Bracket for Gravity® DJ Desk
  • På tilbud!
  • -30,00 kr.
search

Gravity Mounting/ Rack...

XSP 10130

Small helpers - big impact. With the XSP 10130 rack brackets, you can use your Gravity® DJ Desk in an even more versatile and comfortable way. Whether you want to add 19'' equipment to your studio centre, attach a rack drawer for accessories or simply place a power strip firmly and securely within reach, the Gravity® rack brackets offer a multitude of possible applications.

The robust brackets are made of powder-coated steel and are quickly and easily mounted to the rear rail of the FDJ T 01 DJ table via locking screws. As they are two individual brackets, you can adjust the width and positioning as required. The mounting is done via the integrated cage nuts.

Pris 199,00 kr. Normalpris 229,00 kr.

På fjernlager

Palmer Passive Monitor Controller
search

Palmer Passive Monitor...

MONICON® L

The Palmer Monicon® L is a precise, analogue volume control that connects between a computer or audio interface and active monitor speakers. The switch is completely passive and distortion-free, the LED displays and built-in headphone amplifier are powered via the included power supply.

Symmetric combo sockets serve as stereo input. The Monicon® L_s AUX input features RCA sockets and a 3.5 mm stereo jack. The compact console offers outputs for two monitor pairs and a mono summed output via XLR sockets. The stereo or AUX input can be selected alternately, the two outputs individually and together. In addition to its large volume controller, the Monicon® L is also equipped with mono, mute and PFL switches, a 6.35 mm headphone output, and separate AUX and headphone controllers for convenient operation.

Pris 2.129,00 kr.

På fjernlager

Sustain Pedal (Foot Switch)
search

Sustain Pedal (Foot Switch)

SP 1

The SP1 Sustain Pedal is designed to work and feel just like the sustain pedal of an acoustic piano. This highquality pedal features a polarity switch to select either the normally open or the normally closed mode. Thanks to the rubber coated housing the SP1 grips efficiently to the floor and stays put while you play. This high end damper pedal is compatible to almost any electronic keyboard featuring a 1/4_ input jack.

Pris 349,00 kr.

På fjernlager

Gravity Absorber pucks for loudspeakers ( 4 pcs.)
  • På tilbud!
  • -40,00 kr.
search

Gravity Absorber pucks for...

SA SM IF 01

Those who do not place their studio monitors on a table surface, but use dedicated stands and mounts for monitoring in their own studio, are already doing a lot of things correct. Nevertheless, studio monitors also generate oscillations and vibrations here, which are transferred to the supporting surface and can thus impair the stereo image of the speakers. Usually, the larger the surface, the more energy transfer takes place. With the SA SM IF 01 absorber pucks, Gravity has a solution ready that can have a big impact with small means.

The Gravity Absorber pucks can be placed freely under a loudspeaker (e.g. studio monitor) and achieve a decoupling of the loudspeaker cabinet and the installation surface due to their silica gel surface. This significantly reduces vibrations and oscillations and makes the stereo image more precise by reducing acoustic smearing and discolouration.

The load capacity is 36 kg when using four Gravity SASMIF01 absorber pucks, which means that most speakers on the market can be used without any problems.

Pris 199,00 kr. Normalpris 239,00 kr.

På fjernlager

Gravity DJ Desk
search

Gravity DJ Desk

F T 01

Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ Desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes.

The DJ Desk offers enough space to place two decks and a mixing console or your DJ controller. Your performance setup with samplers, sequencers and synthesizers will also find enough room thanks to a surface depth of 50 cm and a width of 119 cm.

In case you need additional space, simply expand the Gravity® DJ Desk with an optionally available laptop holder or two studio monitor holders. The rear rail also offers further flexible expansion options that are tailored to your individual needs as a DJ, producer or instrumentalist.

You will have no trouble adapting the desk to your individual height. It can be set between 68 cm and 109 cm

More stability is provided by the adjustable levelling feet, which compensate for any unevenness of the floor, and the mountable cross bar, which significantly strengthens the table.

Pris 2.509,00 kr.

På fjernlager

Isolation Pad for Studio Monitors 265 x 330 mm
search

Isolation Pad for Studio...

PAD ECO 2

The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.

Pris 179,00 kr.

På fjernlager

Gravity DJ Desk with Adjustable Loudspeaker and Laptop Trays
search

Gravity DJ Desk with...

FDJT 01

Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes.

Your trusty monitors can be placed on the height-adjustable, 360° rotatable and 15° tiltable trays. The precise positioning and inclination of your loudspeakers is made much easier for you by a precise scale on the tubes.

Your laptop is enthroned at the heart of your set-up in the middle of the table, held firmly in place by the integrated pins so that even if tilted extremely, it is always secure. Both loudspeaker and laptop trays can be adjusted precisely along the rear rail of the Gravity® FDJT 01 DJ Desk by shifting them to the left or right.

You will have no trouble adapting the desk to your individual height. It can be set between 680 mm and 1090 mm and offers you plenty of space for your equipment - with a usable depth of 500 mm and a width of 1190 mm.

More stability is provided by the adjustable levelling feet, which compensate for any unevenness of the floor, and the mountable cross bar, which significantly strengthens the table.

Pris 2.809,00 kr.

På fjernlager

Palmer Passive Monitor Controller White Limited Edition
search

Palmer Passive Monitor...

MONICON® WPalmer Monicon®, and the volume is right!

With Palmer Monicon®, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.

The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon® is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.

Pris 779,00 kr.

På fjernlager

Palmer Powered 5" Nearfield Studio Monitor
search

Palmer Powered 5" Nearfield...

STUDIMON 5POWERED 5" NEARFIELD STUDIO MONITOR

When producing and mixing your music or editing your videos you_ll need studio monitors with absolutely honest sound reproduction where all elements can be heard separately from each other. The STUDIMON5 nearfield studio monitors offer accurate sound reproduction, two powerful 30-watt class AB power bi-amplifiers and an elegant design that seamlessly complements every studio environment _ even at home.

With its 3/4" silk dome tweeter, you_ll hear every detail in the stereo field of your mix up to 20 kHz. The magnetically shielded 5" woofer and, rear bass-reflex aperture will give you deep and defined bass frequencies down to 50 Hz. This is all you need to make your low end clear and pop out on most consumer systems, including smartphones.

The back panel provides all needed connections in every Home- and professional Studio environment. Balanced XLR and 6.35 mm stereo jack inputs guarantee disruption-free signal transmission, while a practical volume controller rounds off the loudspeaker's features.

Whether you're making music, creating content or your next live stream, STUDIMON5 ensures a true representation of your mix, so you can make confident mixing decisions to be true to your sound.

Pris 2.099,00 kr.

På fjernlager

Palmer Reference Class Headphone Amplifier - 1-Channel
search

Palmer Reference Class...

HDA 02The PHDA02 - a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes.

In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono mode, the left and right channels are summed, and the resulting mono signal is fed to both the left and right earphones. Again, volume is governed by the Stereo/Left control. In Dual Mono mode, the left and right channels can be used independently with individual level controls for the left and right earphones.

The PHDA02 operates with all headphones with an impedance of 8 up to 200 Ohms. Impedance matching is achieved by a specially designed switchable transformer. Uncommon and costly, this solution provides superior performance, dynamic range, and signal- to-noise ratio at all loads.

Combo input sockets allow for balanced XLR and unbalanced TS headphone connection while parallel XLR outputs facilitate daisy chaining multiple units. The integrated power supply operates with mains from 100 VAC to 240 VAC.

The PHDA02 is equipped with low-noise op amps, and the output amplifiers' discrete power transistors are mounted on heatsinks. Dimensions are 1 U 9.5".

Pris 4.249,00 kr.

På fjernlager

Faux leather "Cayman" - embossed
search

Faux leather "Cayman" -...

0155

Thanks to its properties, embossed Cayman imitation leather is ideal for use as a covering material in loudspeaker construction. Cayman impresses with its fine appearance and appealing quality. Its fabric backing enables a firm and durable bonding.

Pris 159,00 kr.

På fjernlager

Guitel Castor 100 mm with Blue Wheel
  • På tilbud!
  • -20,00 kr.
search

Guitel Castor 100 mm with...

37022100 mm Fixed Castor "Guitel Blue Wheel"

  • 2.4 mm Steel frame, zinc plated
  • blue Resilex tyre on roller race hub bearing
Pris 159,00 kr. Normalpris 179,00 kr.

På fjernlager

Swivel Castor 100 mm with blue Wheel
  • På tilbud!
  • -30,00 kr.
search

Swivel Castor 100 mm with...

372151Swivel Castor

  • double ball race swivel
  • 2 mm steel frame
  • distance of mounting holes: 60 x 80 mm
Pris 99,00 kr. Normalpris 129,00 kr.

På fjernlager

Swivel Castor 100 mm with blue Wheel and Brake
  • På tilbud!
  • -30,00 kr.
search

Swivel Castor 100 mm with...

372191Swivel Castor

  • double ball race swivel
  • 2 mm steel frame
  • distance of mounting holes: 60 x 80 mm
Pris 159,00 kr. Normalpris 189,00 kr.

På fjernlager

Ergonomic installation "Evolution" handle in set (2 pieces)".
search

Ergonomic installation...

EVOLUTIVE HANDLE

Handle consisting of a black plastic dish and a sturdy ring handle made of black powder-coated die-cast zinc. By virtue of the two additional handholds, extremely ergonomic and especially suitable for carrying larger speakers in front of the body.

Pris 429,00 kr.

På fjernlager

Insert Handle plastic black
search

Insert Handle plastic black

3403

Insert handle - in two parts

  • Can be used to lift a box from all four directions
  • With holes for water drain.
Pris 119,00 kr.

På fjernlager

Flying Plate
search

Flying Plate, Aluminium...

5725 B

Lashing point in black anodised aluminium. Specially designed for subsequent mounting on a speaker cabinet, for example. The flexibly mountable panel has a direct tensile load-bearing capacity of up to 500 daN.

Pris 89,00 kr.

På fjernlager

D-Ring black
search

D-Ring black

5710
  • Roping eye with no moving parts
  • No rattle or hum at low frequencies
  • Easily rotated through 90 degrees to suit suspension orientation
  • 2 mm steel with Ø 7 mm dia. pin.
Pris 59,00 kr.

På fjernlager

D-Ring
search

D-Ring

5801

Roping eye/snap-back spring shackle

Pris 129,00 kr.

På fjernlager

Dual-tilt flange (0°/5°)
search

Dual-tilt flange (0°/5°)

SM 7 DT

The SM7DT is a mounting flange with 0° and 5° horizontal tilt for loudspeaker cabinets on speaker stands. Thus, the dispersion of the high frequencies can be controlled and adjusted according to the location. With the 5° tilt, the speaker can be tilted forwards as well as tilted to the rear (depending on the direction of installation of the flange). The flange has a 75 mm installation depth and is made of black powder-coated aluminium and is suitable for a 35 mm tube diameter.

Pris 119,00 kr.

På fjernlager

Tilbage til toppen

Mest solgte

AFMONTERINGSNØGLER BLAUPUNKT 2 STK.
search

AFMONTERINGSNØGLER...

Vægt (Emb.) 60g
Rumfang (Emb.) 0.00074025
Bredde (Emb.) 94mm
Længde (Emb.) 225mm
Højde (Emb.) 35mm
Pris 19,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.