. Køb AdamHall hos CC ProShop .
Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

AdamHall

AdamHall

Aktive filtre

  • Status: Disponibel
  • Mærker: Adam Hall 19" Parts
  • Mærker: Adam Hall Accessories
  • Mærker: NEUTRIK
Deco Cloth B1 with Burnished Grommets Hemmed 6 x 3 m
search

Deco Cloth B1 with...

0151 X 63MADE in GERMANY !

Black deco molton impregnated in flame retardant and 160-g-quality, as curtain, backdrop or for decorative purposes. The fabrics have grommets at intervals of 25 centimeters along one side are backed with an additional strip of webbing, permitting fast and secure installation both tightly stretched as well as loosely pleated. The grommets have a rustproof burnished plating and a 12-millimetre hole diameter. The outer edges are hemmed, while the bottom edge is unhemmed, so that the material can be cut to the necessary length quickly and easily.

Pris 1.519,00 kr.

På lager

Fine Rib Rubber Mat Black 0.7 x 10 m
search

Fine Rib Rubber Mat Black...

85970Economy Drop Over

The Defender® RILLS MAT is a hard wearing fine ribbed, slip-resistant styrene butadiene rubber mat for covering cable lines to prevent tripping hazards. A coarse underside pattern provides grip on a multitude of surfaces. Easily cut to size Defender® RILLS MAT is available in 10 m lengths with a choice of 70 and 100 cm widths.

Pris 769,00 kr.

På lager

Soft pvc cable crossover for floor 3m long
search

Soft pvc cable crossover...

859C 10 M3Adam Hall Accessories Rubber Cable Duct, Black

Cables of all kinds can quickly become a tripping hazard, become frayed or look aesthetically annoying in the office, at home or in public facilities. The 859 C10 M3 rubber cable duct by Adam Hall Accessories provides a solution to these common problems.

The trip protection is flexible and can be cut from its 3-metre length to any desired length. Thanks to its channel width of 10 mm and channel height of 8 mm, it protects power cables, network cables, aux cables, USB cables and other cables with a thickness of up to 8 mm. At the same time, the cable is held securely in the channel and the entire cable crossover remains slip-resistant.

The Adam Hall Accessories cable duct 859 C10 M3 protects cables, prevents falling and tripping accidents and provides a more visually appealing appearance in offices, homes and public facilities, both indoors and outdoors.

Pris 219,00 kr.

På lager

Neutrik Jack TRS Neutrik® | angled plug
search

Neutrik Jack TRS Neutrik® -...

NP3RX-BAG

3 pole 1/4" professional phone plug, nickel contacts, black shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Features & Benefits
  • Extra slim 1/4" plug for highest packing density
  • Robust diecast shell in stylish design
  • Proven chuck type strain relief for reliable cable retention
  • Sleek design for best handling convenience
  • Precision machined one-piece contacts - avoid hook up of tip contact
Pris 89,00 kr.

På lager

19" Rack Tray 2U | with pull-out rails
search

19" Rack Tray 2U - with...

87555
  • 19" Rack Tray 2 U with pull out shelf on drawer slides with a depth of 358 mm
  • inner height: 73 mm
  • effective surface (pulled out): 350 mm
Pris 839,00 kr.

På lager

19
  • På tilbud!
  • -40,00 kr.
search

19" 3U ERGO Rack Drawer -...

87403 ERGO

The ERGO is a very affordable rackmount drawer with heavy-duty 1.5 mm steel construction and easy, ergonomic operation. It integrates a recessed pull handle that runs the width of the drawer and a convenient push-to-close, pull-to-open latching mechanism with 1,5 kg pull force. This economy rack drawer has a black semi-gloss powder coating finish and 20 kg load capacity. It features smooth-running full extension ball bearing slides with front disconnect for easy drawer removal.

Pris 599,00 kr. Normalpris 639,00 kr.

På lager

19
  • På tilbud!
  • -90,00 kr.
search

19" 2U Rack Drawer - steel

87402 ECONOMYOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Economy" version of the standard 19" drawer from Adam Hall® with 2/3 extension, on ball bearing slide-in rails.

Pris 799,00 kr. Normalpris 889,00 kr.

På lager

19" U-Shaped Rack Panel 16 Sockets 1U with Tie Bar
search

19" U-Shaped Rack Panel 16...

872225

1 U rack panel with punched holes for 16 universal _D_ type XLR sockets.

  • With integral strain relief
  • Integrated tie bar including 16cable ties
Pris 149,00 kr.

På lager

Neutrik Adapter XLR 3-pole male to XLR 3-pole male Neutrik®
search

Neutrik Adapter XLR 3-pole...

NA3MM

3 pole XLR male - 3 pole XLR male (gender conversion adapter)

Features & Benefits
  • Versatile, pre-wired and ready to use adapters to reliably interlock various connector systems
  • Professional look and compact space saving design, based on the XX Series
  • Rugged diecast shell for best reliability.
Pris 129,00 kr.

På lager

Neutrik HDMI chassis connector
search

Neutrik HDMI chassis connector

NAHDMI-W-B

Neutrik's HDMI solution for the transmission of any digital TV and PC video format including high-definition video (HDTV) can be integrated in networks very easy.

Pris 189,00 kr.

På lager

Neutrik Jack TRS Neutrik® | angled plug with gold-plated contacts
search

Neutrik Jack TRS Neutrik® -...

NP3RX-B

3 pole right-angle 1/4" professional phone plug, gold contacts, black shel

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Pris 99,00 kr.

På lager

Neutrik Jack TS Neutrik® | angled plug
search

Neutrik Jack TS Neutrik® -...

NP2RX

1/4" professional right-angle phone plug, 2 pole, nickel contacts, nickel shell

The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch).

The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip.

The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Features & Benefits
  • All metal housing eliminates the plastic cover of the predecessor NP*RCS and improves further durability and EMI protection
  • Extra slim 1/4" plug for highest packing density
  • Robust diecast shell in stylish design
  • Proven chuck type strain relief for reliable cable retention
  • Sleek design for best handling convenience
  • Precision machined one-piece contacts - avoid hook up of tip contact
Pris 59,00 kr.

På lager

Neutrik 3-pole XLR panel jack combined with 6.35 mm jack socket
search

Neutrik 3-pole XLR panel...

NCJ6FA V 0

3-pole XLR panel jack combined with 6.35 mm jack in the smallest XLR housing available, stereo, vertical PCB mounting, retention spring

Pris 29,00 kr.

På lager

19" Rack Tray 1U | with pull-out rails
search

19" Rack Tray 1U - with...

87556

19" Rackmount pull-out tray 1 U. Drawer with slides mounted on both sides with.The rack brackets on the front and back are extendable, allowing the unit to be fitted with rear support to racks of varying depths.

  • Mounting depth: Adjustable 360-480 mm
  • Usable surface 412 mm wide, 380 mm deep
Pris 709,00 kr.

På lager

Neutrik 7-Way Adjustable Angled XLR Connector
search

Neutrik 7-Way Adjustable...

NC3MRX

3 pole right angle male cable connector, nickel housing, silver contacts

The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features & Benefits
  • Extra slim right-angle connector
  • 7 selectable cable outlet positions
  • Male connector with improved locking recess without "window", more stringent housing increases durability
  • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
  • Boot with polyurethane gland gives high protection to cable bending stresses
  • Coloured rings and boots available for coding or identification
  • Sleek and ergonomic design - valuable and handy
  • Branded with unique hologram - guarantees genuine and authentic Neutrik product
Pris 99,00 kr.

På lager

19
  • På tilbud!
  • -30,00 kr.
search

19" 2U ERGO Rack Drawer -...

87402 ALU ERGO

If you want to keep your rack tidy by storing accessories and cables conveniently and safely, ERGO has a sturdy rack drawer for tough everyday travel. The 1.5 mm aluminium rack drawer runs smoothly on ball bearing mounted telescopic rails and can be fully pulled out or completely removed.

The recessed handle lets you push and pull the drawer, and the drawer locks securely into place when closed.

Pris 799,00 kr. Normalpris 829,00 kr.

På lager

Neutrik XLR plug 3-pole female Neutrik® | angled plug
search

Neutrik XLR plug 3-pole...

NC3FRX

3 pole right angle female cable connector, nickel housing, silver contacts

The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

Features & Benefits
  • Extra slim right-angle connector
  • 5 selectable cable outlet positions
  • Unique cage design of female contact for low contact resistance and high integrity
  • Female contact incorporates a solder barrier to prevent solder running into the contact mating area
  • Female connector with improved solid metal latch which is larger and easier to handle
  • Additional ground spring contacts for better shell ground continuity
  • Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
  • Boot with polyurethane gland gives high protection to cable bending stresses
  • Coloured rings and boots available for coding or identification
  • Sleek and ergonomic design - valuable and handy
  • Branded with unique hologram - guarantees genuine and authentic Neutrik product
Pris 109,00 kr.

På lager

Neutrik XLR plug 3-pole female Neutrik®
search

Neutrik XLR plug 3-pole...

NC3FX

3 pole female cable connector with Nickel housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

Features & Benefits
  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
  • Coloured rings and boots available for coding and marking
  • UL recognized components
Pris 59,00 kr.

På lager

Neutrik Dummy Plug for XLR male Receptacles
search

Neutrik Dummy Plug for XLR...

NDM

The dummyPLUG NDM for Neutrik male XLR receptacles enables you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

Pris 19,00 kr.

På lager

Acoustic Molton B1 Creme 500g/m²
search

Acoustic Molton B1 Creme...

0160 WH

Acoustic molton impregnated in flame retardant and 500-g-quality, for rehearsal room , studios and stages with excellent sound absorption coefficient.

Pris 319,00 kr.

På lager

Neutrik XLR plug 3-pole female Neutrik®
search

Neutrik XLR plug 3-pole...

NC3FX-BAG

3 pole female cable connector, black metal housing and silver contacts.

The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables.

Features & Benefits
  • Rugged zinc diecast shell, long lasting and durable
  • Chuck type strain relief system for secure clamping of cables
  • Boot with rubber gland gives high protection against bending stresses
  • Coloured rings and boots available for coding and marking
  • UL recognized components
Pris 59,00 kr.

På lager

Universal Hook Clamp with Clamping Lever Black - VERSION 2
search

Universal Hook Clamp with...

SUPER CLAMP MK2

When you face challenges like mounting lighting equipment, positioning cameras or loudspeakers at the proper angle, hanging Molton and backdrops, or mounting other equipment safely on a truss, you need just the right companion you can trust in.

The new Super Clamp now offers you the possibility to fix heavy objects such as lighting equipment easily with one click. The "One-Click Auto-Lock", snaps the fixing bolt directly into place.

Whether working as a photographer, a YouTuber in a home studio, or as a lighting technician attaching lights to a truss, the Super Clamp gives your creativity the freedom it requires.

As well as having an impressive load capacity, the rugged Super Clamp can be used in practically any situation and on any surface - curved or flat. Your new clamping companion can support up to 20 kg and enjoys German TÜV certification.

See for yourself how quick and easy it is to mount your equipment securely using the Super Clamp.

Pris 269,00 kr.

På lager

19" Front Panel with Plexiglass Insert 1 U
search

19" Front Panel with...

87441
  • 19" Cover with plexiglass front for protecting settings on effects units, etc
Pris 219,00 kr.

På lager

Neutrik USB chassis connector 2.0 Adapter (Typ A & B)
search

Neutrik USB chassis...

NAUSB-W-B

Due to the rising digitisation the interface problems between audio/video networks, IT equipment, MP3 camcorders, etc. increase. A rugged solution is needed.

Neutrik's reversible USB gender changer, mounted in the standardized D-shape housing, and the rugged patch cables solve this problem.

Pris 99,00 kr.

På lager

19" Rack Tray 1U
search

19" Rack Tray 1U

8754

If you want to install devices in the rack that do not correspond to the standard 19" dimensions, here is the right tray for you. The universal hole pattern is suitable for mounting many different devices.

Pris 249,00 kr.

På lager

16 mm Bolt with M10 Internal Thread for SCP710B
search

16 mm Bolt with M10...

SS 019

The SS019 is a 16 mm bolt with M10 thread designed for the SCP710B universal clamp. It is made of stainless steel with a thread depth of 25 mm.

Pris 49,00 kr.

På lager

Neutrik speakON® chassis connector 4-pole male Neutrik®
search

Neutrik speakON® chassis...

NL4MPXX

4 pole chassis connector, black D-size flange, countersunk thru holes, 3/16" flat tabs

The speakON panel mount connectors are the standard chassis connectors for loudspeaker / amplifier interconnections. They feature a unique metal locking system, making contact only once fully locked. The speakON receptacles are robust, versatile and easy to terminate.

Pris 49,00 kr.

På lager

Universal Hook Clamp with Toggle black
search

Universal Hook Clamp with...

SUPER CLAMP
  • Perfect for lighting and multimedia applications
  • Adjustable clamping lever - can be operated in any position
  • Full metal (stainless steel and die-cast aluminium alloy)
  • For mounting on round and square tubes as well as on flat objects
  • Clamping range: 13 _ 55 mm
  • 5/8" (16 mm) hexagonal or circular pin insert
  • 1 x M6 and 2 x M5 thread
  • TÜV certified
  • Max. load capacity: 20 kg
  • Not oxidising
  • Various mounting bolts available as an option
Pris 249,00 kr.

På lager

Neutrik Adapter Speakon 2/4-pole to Speakon 2/4-pole
search

Neutrik Adapter Speakon...

NL4MMX

Lockable 4 pole speakON adapter

Links two NL2/4F*s together for cable extension. Changes gender to male when permanently locked on the cable.

Features permanent secure connection on a speakON cable connector using 2nd lock. Can be permanently attached to NL2/4F*.

Pris 89,00 kr.

På lager

19" Rack Tray 2U | 375 mm depth
search

19" Rack Tray 2U - 375 mm...

87552

19" Rack Tray extra deep for mounting non standard equipment with a depth of up to 375 mm

  • Rear edge is folded up 10 mm for extra stability
  • Internal width: 435mm
  • Ventilation slots in sides
Pris 309,00 kr.

På lager

Neutrik Dummy Plug for XLR Chassis Connectors
search

Neutrik Dummy Plug for XLR...

NDF

The dummyPLUG NDF for Neutrik female XLR receptacles enable you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

Pris 19,00 kr.

På lager

Neutrik 8-pole speakON to 8-pole speakON adapter
search

Neutrik 8-pole speakON to...

NL8MMXX

To extend a speakON cable, you need a straight-through adapter, as the two ends of the cable always consist of female connectors and it is not possible to plug them together as with XLR cables, for example. For this purpose, you can get the NL8MMXX from Neutrik (R), for example. The adapter is made of sturdy die-cast zinc and comes with two male sockets and is only suitable for 8-pole speakON. This adapter is also available for the 4-pole version.

Pris 279,00 kr.

På fjernlager

Sustain Pedal (Foot Switch)
search

Sustain Pedal (Foot Switch)

SP 1

The SP1 Sustain Pedal is designed to work and feel just like the sustain pedal of an acoustic piano. This highquality pedal features a polarity switch to select either the normally open or the normally closed mode. Thanks to the rubber coated housing the SP1 grips efficiently to the floor and stays put while you play. This high end damper pedal is compatible to almost any electronic keyboard featuring a 1/4_ input jack.

Pris 349,00 kr.

På fjernlager

Holdon Midi Clip white - 250 stk.
search

Holdon Midi Clip white -...

MIDI CLIP WHITE

Midi Clip white (load up to 100 kg) for mounting Molton, tarpaulins, etc. This clip is especially suitable for mounting Molton fabrics without eyelets, or for fabrics that do not have any other mounting option. The Molton fabric is easily inserted between the clip and secured, without damaging the material.

Pris 2.969,00 kr.

På fjernlager

Schackle with Bolt
search

Schackle with Bolt, Nut and...

SH2 B 0325

High-strength tempered shackle, hot-dip galvanised, curved, with bolt, nut, and split pin.

Pris 139,00 kr.

På fjernlager

Bag Article Midi Clip for Molton Black ( 50 Pcs. )
search

Bag Article Midi Clip for...

MIDI CLIP BLK M50 AH

Midi Clip black (holds up to 100 kg) for fastening molton, canvas, covers etc. This clip is particularly suited for fastening materials that do not have eyelets or other fastening possibilities. The material is simply clamped down by the clip, so that the material itself does not get damaged.

Pris 549,00 kr.

På fjernlager

Holdon Midi Clip black - 250 stk.
search

Holdon Midi Clip black -...

MIDI CLIP BLACK

Midi Clip black (holds up to 100 kg) for fastening molton, canvas, covers etc. This clip is particularly suited for fastening materials that do not have eyelets or other fastening possibilities. The material is simply clamped down by the clip, so that the material itself does not get damaged.

Pris 2.969,00 kr.

På fjernlager

Truss Stacker Interface Eurotrussing plastic
search

Truss Stacker Interface...

38210 P

The TrussStacker system allows trussing to be easily and securely loaded onto castor boards and stacked together using notched interfaces for safe transport.

Note: the plastic variant is not suitable for 3-point truss systems.

Pris 189,00 kr.

På fjernlager

Tilbage til toppen

Mest solgte

AFMONTERINGSNØGLER BLAUPUNKT 2 STK.
search

AFMONTERINGSNØGLER...

Vægt (Emb.) 60g
Rumfang (Emb.) 0.00074025
Bredde (Emb.) 94mm
Længde (Emb.) 225mm
Højde (Emb.) 35mm
Pris 19,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.