. Køb AdamHall hos CC ProShop (4) .
Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

AdamHall

AdamHall

Aktive filtre

  • Status: Disponibel
  • Status: På lager
  • Mærker: Adam Hall Accessories
  • Mærker: Adam Hall Hardware
  • Mærker: Gravity
  • Mærker: LD Systems
LD Systems 6.5" Installation Monitor passive white (pair)
search

LD Systems 6.5"...

SAT 62 G2 W

The LD Systems SAT62G2 is an extremely compact, dependable 2-way speaker for numerous installation applications. It blends unobtrusively into practically any surroundings, e.g., in bars and restaurants, retail shops or even at home.

The bass-reflex design with a 6.5" custom woofer and a 1_ silk dome tweeter with wave guide provides for powerful and sonorous reproduction throughout a frequency range of 55 Hz - 20 kHz with a sound-level pressure of up to 108 dB. Thus the SAT62G2 is suitable for full-range operation and as a satellite in conjunction with a subwoofer from the LD installation series. It has a RMS power rating of 80 W. The impedance of 16 ohms permits parallel operation of eight SAT62G2 speakers on 2 ohms.

The 12 mm MDF cabinet with a rugged textured coating is available in black and white. The included mounting bracket and M6 rigging points offer extensive possibilities for mounting; a universal joint mount is available as an accessory. It is connected via spring terminals.

Pris 2.289,00 kr.

På fjernlager

LD Systems 6.5" Installation Monitor passive black (pair)
search

LD Systems 6.5"...

SAT 62 G2

The LD Systems SAT62G2 is an extremely compact, dependable 2-way speaker for numerous installation applications. It blends unobtrusively into practically any surroundings, e.g., in bars and restaurants, retail shops or even at home.

The bass-reflex design with a 6.5" custom woofer and a 1_ silk dome tweeter with wave guide provides for powerful and sonorous reproduction throughout a frequency range of 55 Hz - 20 kHz with a sound-level pressure of up to 108 dB. Thus the SAT62G2 is suitable for full-range operation and as a satellite in conjunction with a subwoofer from the LD installation series. It has a RMS power rating of 80 W. The impedance of 16 ohms permits parallel operation of eight SAT62G2 speakers on 2 ohms.

The 12 mm MDF cabinet with a rugged textured coating is available in black and white. The included mounting bracket and M6 rigging points offer extensive possibilities for mounting; a universal joint mount is available as an accessory. It is connected via spring terminals.

Pris 2.289,00 kr.

På fjernlager

LD Systems 4 x 4" Passive Installation Speakerwhite
search

LD Systems 4 x 4" Passive...

SAT 442 G2 W

The LD Systems SAT442G² is an extremely slim installation monitor that can be unobtrusively integrated into almost any environment.

The elegant column design of the SAT442G² achieves a smooth balanced 120° horizontal dispersion with a focused 30° vertical directivity and a maximum sound pressure of 114 db. Four 4" custom-made woofers and a 1" compression driver from Celestion provide a balanced playback with a frequency response of 75 Hz to 20 kHz; spring terminals are used as connection. For a powerful, deep bass extension, we recommend the subwoofer installation series from LD Systems.

The rugged cabinet of the SAT442G², featuring a durable textured coating, is made of 12 mm MDF and is available in black or white. M6 inserts and an included universal joint mount (LDSATWMB10W) provide a wide range of possibilities for mounting.

Pris 2.799,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 10 A G3
search

LD Systems Padded...

MON 10 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 10 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 619,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 8 A G3
search

LD Systems Padded...

MON 8 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 8 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 559,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 15 A G3
search

LD Systems Padded...

MON 15 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 15 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 749,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 12 A G3
search

LD Systems Padded...

MON 12 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 12 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 649,00 kr.

På fjernlager

LD Systems Ring Screw Stainless Steel M8 x 30 mm Incl. Washer
search

LD Systems Ring Screw...

5430 M8

Polished stainless steel screw with fitting washer for multi-purpose use such as for hanging speaker systems or attaching safety ropes. Also suitable for full-range loudspeakers from the LD Systems Series.

Pris 49,00 kr.

På fjernlager

Screw M8 x 16 with Gear Rim
search

Screw M8 x 16 with Gear...

54M8X16

Galvanized screw with integrated gear rim and washer for easy mounting of substructure rollers.

Pris 169,00 kr.

På fjernlager

Screw M8 x 20 with Gear Rim
search

Screw M8 x 20 with Gear...

54M8X20

Galvanized screw with integrated gear rim and washer for easy mounting of substructure rollers.

Pris 179,00 kr.

På fjernlager

Gravity Mounting/ Rack Bracket for Gravity® DJ Desk
  • På tilbud!
  • -30,00 kr.
search

Gravity Mounting/ Rack...

XSP 10130

Small helpers - big impact. With the XSP 10130 rack brackets, you can use your Gravity® DJ Desk in an even more versatile and comfortable way. Whether you want to add 19'' equipment to your studio centre, attach a rack drawer for accessories or simply place a power strip firmly and securely within reach, the Gravity® rack brackets offer a multitude of possible applications.

The robust brackets are made of powder-coated steel and are quickly and easily mounted to the rear rail of the FDJ T 01 DJ table via locking screws. As they are two individual brackets, you can adjust the width and positioning as required. The mounting is done via the integrated cage nuts.

Pris 199,00 kr. Normalpris 229,00 kr.

På fjernlager

Sustain Pedal (Foot Switch)
search

Sustain Pedal (Foot Switch)

SP 1

The SP1 Sustain Pedal is designed to work and feel just like the sustain pedal of an acoustic piano. This highquality pedal features a polarity switch to select either the normally open or the normally closed mode. Thanks to the rubber coated housing the SP1 grips efficiently to the floor and stays put while you play. This high end damper pedal is compatible to almost any electronic keyboard featuring a 1/4_ input jack.

Pris 349,00 kr.

På fjernlager

Gravity Absorber pucks for loudspeakers ( 4 pcs.)
  • På tilbud!
  • -40,00 kr.
search

Gravity Absorber pucks for...

SA SM IF 01

Those who do not place their studio monitors on a table surface, but use dedicated stands and mounts for monitoring in their own studio, are already doing a lot of things correct. Nevertheless, studio monitors also generate oscillations and vibrations here, which are transferred to the supporting surface and can thus impair the stereo image of the speakers. Usually, the larger the surface, the more energy transfer takes place. With the SA SM IF 01 absorber pucks, Gravity has a solution ready that can have a big impact with small means.

The Gravity Absorber pucks can be placed freely under a loudspeaker (e.g. studio monitor) and achieve a decoupling of the loudspeaker cabinet and the installation surface due to their silica gel surface. This significantly reduces vibrations and oscillations and makes the stereo image more precise by reducing acoustic smearing and discolouration.

The load capacity is 36 kg when using four Gravity SASMIF01 absorber pucks, which means that most speakers on the market can be used without any problems.

Pris 199,00 kr. Normalpris 239,00 kr.

På fjernlager

Gravity DJ Desk
search

Gravity DJ Desk

F T 01

Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ Desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes.

The DJ Desk offers enough space to place two decks and a mixing console or your DJ controller. Your performance setup with samplers, sequencers and synthesizers will also find enough room thanks to a surface depth of 50 cm and a width of 119 cm.

In case you need additional space, simply expand the Gravity® DJ Desk with an optionally available laptop holder or two studio monitor holders. The rear rail also offers further flexible expansion options that are tailored to your individual needs as a DJ, producer or instrumentalist.

You will have no trouble adapting the desk to your individual height. It can be set between 68 cm and 109 cm

More stability is provided by the adjustable levelling feet, which compensate for any unevenness of the floor, and the mountable cross bar, which significantly strengthens the table.

Pris 2.509,00 kr.

På fjernlager

Gravity DJ Desk with Adjustable Loudspeaker and Laptop Trays
search

Gravity DJ Desk with...

FDJT 01

Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes.

Your trusty monitors can be placed on the height-adjustable, 360° rotatable and 15° tiltable trays. The precise positioning and inclination of your loudspeakers is made much easier for you by a precise scale on the tubes.

Your laptop is enthroned at the heart of your set-up in the middle of the table, held firmly in place by the integrated pins so that even if tilted extremely, it is always secure. Both loudspeaker and laptop trays can be adjusted precisely along the rear rail of the Gravity® FDJT 01 DJ Desk by shifting them to the left or right.

You will have no trouble adapting the desk to your individual height. It can be set between 680 mm and 1090 mm and offers you plenty of space for your equipment - with a usable depth of 500 mm and a width of 1190 mm.

More stability is provided by the adjustable levelling feet, which compensate for any unevenness of the floor, and the mountable cross bar, which significantly strengthens the table.

Pris 2.809,00 kr.

På fjernlager

Faux leather "Cayman" - embossed
search

Faux leather "Cayman" -...

0155

Thanks to its properties, embossed Cayman imitation leather is ideal for use as a covering material in loudspeaker construction. Cayman impresses with its fine appearance and appealing quality. Its fabric backing enables a firm and durable bonding.

Pris 159,00 kr.

På fjernlager

Swivel Castor 100 mm with blue Wheel
  • På tilbud!
  • -30,00 kr.
search

Swivel Castor 100 mm with...

372151Swivel Castor

  • double ball race swivel
  • 2 mm steel frame
  • distance of mounting holes: 60 x 80 mm
Pris 99,00 kr. Normalpris 129,00 kr.

På fjernlager

Swivel Castor 100 mm with blue Wheel and Brake
  • På tilbud!
  • -30,00 kr.
search

Swivel Castor 100 mm with...

372191Swivel Castor

  • double ball race swivel
  • 2 mm steel frame
  • distance of mounting holes: 60 x 80 mm
Pris 159,00 kr. Normalpris 189,00 kr.

På fjernlager

Ergonomic installation "Evolution" handle in set (2 pieces)".
search

Ergonomic installation...

EVOLUTIVE HANDLE

Handle consisting of a black plastic dish and a sturdy ring handle made of black powder-coated die-cast zinc. By virtue of the two additional handholds, extremely ergonomic and especially suitable for carrying larger speakers in front of the body.

Pris 429,00 kr.

På fjernlager

Insert Handle plastic black
search

Insert Handle plastic black

3403

Insert handle - in two parts

  • Can be used to lift a box from all four directions
  • With holes for water drain.
Pris 119,00 kr.

På fjernlager

Flying Plate
search

Flying Plate, Aluminium...

5725 B

Lashing point in black anodised aluminium. Specially designed for subsequent mounting on a speaker cabinet, for example. The flexibly mountable panel has a direct tensile load-bearing capacity of up to 500 daN.

Pris 89,00 kr.

På fjernlager

D-Ring black
search

D-Ring black

5710
  • Roping eye with no moving parts
  • No rattle or hum at low frequencies
  • Easily rotated through 90 degrees to suit suspension orientation
  • 2 mm steel with Ø 7 mm dia. pin.
Pris 59,00 kr.

På fjernlager

D-Ring
search

D-Ring

5801

Roping eye/snap-back spring shackle

Pris 129,00 kr.

På fjernlager

LD Systems Padded Bag for FX300
search

LD Systems Padded Bag for...

FX 300 BAG

As the proud owner of an FX 300 effects pedal, you want it to last for as long as possible. The matching padded bag will protect it from getting scratched during the day-to-day touring use.

This bag does so much more though: its water-resistant 1680D nylon protects your FX 300 from splashing water during transport, and there is an extra compartment for the power supply unit so that you always have it by your side and neatly tucked away.

You can also easily carry cables or other accessories in the large inside pocket. Have fun and enjoy using the FX 300 for a long time!

Pris 249,00 kr.

På fjernlager

Gravity Guitar Footrest
search

Gravity Guitar Footrest

GS FB 01

Designed to support the proper posture for playing classical guitar, this Gravity footrest offers 6 adjustable height levels from 18 to 255 mm to perfectly adapt to any player. The rubber tipped feet are angled outwards to increase stability and prevent tipping over, and the extra wide construction with non-slip rubber pad provides a secure grip of any foot.

Pris 129,00 kr.

På fjernlager

LD Systems Power Supply for FX 300
search

LD Systems Power Supply for...

FX 300 PS

To make sure you always have the right and necessary power for your FX 300, we highly recommend its suitable power supply - FX 300 PS.

It runs center-negative at 9V DC / 500 mA and features a common 2.1 mm plug with negative tip and positive shaft.

Pris 169,00 kr.

På fjernlager

Holdon Midi Clip white - 250 stk.
search

Holdon Midi Clip white -...

MIDI CLIP WHITE

Midi Clip white (load up to 100 kg) for mounting Molton, tarpaulins, etc. This clip is especially suitable for mounting Molton fabrics without eyelets, or for fabrics that do not have any other mounting option. The Molton fabric is easily inserted between the clip and secured, without damaging the material.

Pris 2.969,00 kr.

På fjernlager

Gravity Robust work gloves size L
  • På tilbud!
  • -20,00 kr.
search

Gravity Robust work gloves...

XW GLOVE L

Everything today is done digitally: lights, audio and video operate on networks and can be controlled from everywhere and at any time using touchscreens. Hybrid events even sometimes take audiences into the virtual world. Yet no stage in the world can be put up at the touch of a button. The heavy lifting still needs to be done manually. Speakers, spotlights, mixing consoles and many other things still have to be pre-loaded into cases and trucks by hand. And that's why Gravity developed the XW GLOVE working gloves to make the work of anyone who has to turn events into a physical reality: safer, efficient and more comfortable.

The XW GLOVE gloves feature two types of materials: the fingers and palm are made of durable goat leather and the back of the hand of elastic jersey. A good fit is ensured by the rubber band and the velcro fastener. Goat leather sets itself apart from other types of leather because it has no oily residues, helping it to remain soft and be more resilient and tear-resistant than other kinds of leather.

There is also an opening for the thumb and index finger on the XW GLOVE that allows digital applications to be accessed at any time, even when toiling away on the stage and in the warehouse. Apps and remote software on smartphones and tablets required for taking care of daily business in all fields can thus be used quickly and freely without always having to remove your gloves. Carrying out high-precision work by hand is also made easier at the same time: small parts can be grabbed, turned and pulled, tape can be ripped, etc.

The Gravity XW GLOVE gloves are available in black in sizes M, L and XL.

Pris 139,00 kr. Normalpris 159,00 kr.

På fjernlager

Schackle with Bolt
search

Schackle with Bolt, Nut and...

SH2 B 0325

High-strength tempered shackle, hot-dip galvanised, curved, with bolt, nut, and split pin.

Pris 139,00 kr.

På fjernlager

Tilbage til toppen

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.