. Køb AdamHall hos CC ProShop (3) .
Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

AdamHall

AdamHall

Aktive filtre

  • Status: Disponibel
  • Status: På lager
  • Mærker: Adam Hall 19" Parts
  • Mærker: Adam Hall Stands
  • Mærker: LD Systems
LD Systems 6.5" active Installation Monitor black
search

LD Systems 6.5" active...

SAT 62 A G2

The LD Systems SAT62AG2 is the active version of the SAT62G2. The compact 2-way speaker is not only suitable for installation, but also as a home studio monitor and for other sound reinforcement tasks.

The bass-reflex design is loaded with a 6.5" custom woofer and a 1_ silk dome tweeter with wave guide, which are driven by a Class AB power amplifier with 50 W RMS power and overcurrent protection. The input is a XLR-jack combo socket, an XLR socket permits looping through of the signal. Reproduction is balanced and dynamic throughout the frequency range of 55 Hz - 20 kHz and attains a maximum sound-level pressure of 108 dB. The SAT62AG2 features a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.

The 12 mm MDF cabinet with a durable textured coating is available in black and white and equipped with M6 rigging points. An included mounting bracket offers additional possibilities for mounting; a universal joint mount is available as an accessory.

Pris 2.009,00 kr.

På fjernlager

LD Systems 2 x 6.5" passive Installation Speaker white
search

LD Systems 2 x 6.5" passive...

SAT 262 G2 W

With its slim, streamlined design, the LD Systems SAT 262 G2 is excellently suited for permanent installation and discreet integration in virtually any setting. It features two 6.5" custom woofers and a 1_ Celestion compression driver connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.

The SAT 262 G2 attains a maximum sound-level pressure of 116 dB over a frequency response curve of 65_19 kHz with a permanent load capacity of 180 watts. The reflex housing is made of 12 mm MDF and is equipped with four M8 mounting holes. A speakON-compatible socket and a terminal block provide input options, while an additional terminal block serves as an output for convenient parallel connection.

Special wall holders are available as an accessory to facilitate wall mounting. The SAT 262 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).

Pris 2.799,00 kr.

På fjernlager

LD Systems 6.5" Installation Monitor passive white (pair)
search

LD Systems 6.5"...

SAT 62 G2 W

The LD Systems SAT62G2 is an extremely compact, dependable 2-way speaker for numerous installation applications. It blends unobtrusively into practically any surroundings, e.g., in bars and restaurants, retail shops or even at home.

The bass-reflex design with a 6.5" custom woofer and a 1_ silk dome tweeter with wave guide provides for powerful and sonorous reproduction throughout a frequency range of 55 Hz - 20 kHz with a sound-level pressure of up to 108 dB. Thus the SAT62G2 is suitable for full-range operation and as a satellite in conjunction with a subwoofer from the LD installation series. It has a RMS power rating of 80 W. The impedance of 16 ohms permits parallel operation of eight SAT62G2 speakers on 2 ohms.

The 12 mm MDF cabinet with a rugged textured coating is available in black and white. The included mounting bracket and M6 rigging points offer extensive possibilities for mounting; a universal joint mount is available as an accessory. It is connected via spring terminals.

Pris 2.289,00 kr.

På fjernlager

LD Systems 6.5" Installation Monitor passive black (pair)
search

LD Systems 6.5"...

SAT 62 G2

The LD Systems SAT62G2 is an extremely compact, dependable 2-way speaker for numerous installation applications. It blends unobtrusively into practically any surroundings, e.g., in bars and restaurants, retail shops or even at home.

The bass-reflex design with a 6.5" custom woofer and a 1_ silk dome tweeter with wave guide provides for powerful and sonorous reproduction throughout a frequency range of 55 Hz - 20 kHz with a sound-level pressure of up to 108 dB. Thus the SAT62G2 is suitable for full-range operation and as a satellite in conjunction with a subwoofer from the LD installation series. It has a RMS power rating of 80 W. The impedance of 16 ohms permits parallel operation of eight SAT62G2 speakers on 2 ohms.

The 12 mm MDF cabinet with a rugged textured coating is available in black and white. The included mounting bracket and M6 rigging points offer extensive possibilities for mounting; a universal joint mount is available as an accessory. It is connected via spring terminals.

Pris 2.289,00 kr.

På fjernlager

LD Systems 4 x 4" Passive Installation Speakerwhite
search

LD Systems 4 x 4" Passive...

SAT 442 G2 W

The LD Systems SAT442G² is an extremely slim installation monitor that can be unobtrusively integrated into almost any environment.

The elegant column design of the SAT442G² achieves a smooth balanced 120° horizontal dispersion with a focused 30° vertical directivity and a maximum sound pressure of 114 db. Four 4" custom-made woofers and a 1" compression driver from Celestion provide a balanced playback with a frequency response of 75 Hz to 20 kHz; spring terminals are used as connection. For a powerful, deep bass extension, we recommend the subwoofer installation series from LD Systems.

The rugged cabinet of the SAT442G², featuring a durable textured coating, is made of 12 mm MDF and is available in black or white. M6 inserts and an included universal joint mount (LDSATWMB10W) provide a wide range of possibilities for mounting.

Pris 2.799,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 10 A G3
search

LD Systems Padded...

MON 10 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 10 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 619,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 8 A G3
search

LD Systems Padded...

MON 8 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 8 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 559,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 15 A G3
search

LD Systems Padded...

MON 15 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 15 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 749,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 12 A G3
search

LD Systems Padded...

MON 12 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 12 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 649,00 kr.

På fjernlager

LD Systems Ring Screw Stainless Steel M8 x 30 mm Incl. Washer
search

LD Systems Ring Screw...

5430 M8

Polished stainless steel screw with fitting washer for multi-purpose use such as for hanging speaker systems or attaching safety ropes. Also suitable for full-range loudspeakers from the LD Systems Series.

Pris 49,00 kr.

På fjernlager

Isolation Pad for Studio Monitors 265 x 330 mm
search

Isolation Pad for Studio...

PAD ECO 2

The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.

Pris 179,00 kr.

På fjernlager

Dual-tilt flange (0°/5°)
search

Dual-tilt flange (0°/5°)

SM 7 DT

The SM7DT is a mounting flange with 0° and 5° horizontal tilt for loudspeaker cabinets on speaker stands. Thus, the dispersion of the high frequencies can be controlled and adjusted according to the location. With the 5° tilt, the speaker can be tilted forwards as well as tilted to the rear (depending on the direction of installation of the flange). The flange has a 75 mm installation depth and is made of black powder-coated aluminium and is suitable for a 35 mm tube diameter.

Pris 119,00 kr.

På fjernlager

LD Systems Padded Bag for FX300
search

LD Systems Padded Bag for...

FX 300 BAG

As the proud owner of an FX 300 effects pedal, you want it to last for as long as possible. The matching padded bag will protect it from getting scratched during the day-to-day touring use.

This bag does so much more though: its water-resistant 1680D nylon protects your FX 300 from splashing water during transport, and there is an extra compartment for the power supply unit so that you always have it by your side and neatly tucked away.

You can also easily carry cables or other accessories in the large inside pocket. Have fun and enjoy using the FX 300 for a long time!

Pris 249,00 kr.

På fjernlager

LD Systems Power Supply for  FX 300
search

LD Systems Power Supply for...

FX 300 PS

To make sure you always have the right and necessary power for your FX 300, we highly recommend its suitable power supply - FX 300 PS.

It runs center-negative at 9V DC / 500 mA and features a common 2.1 mm plug with negative tip and positive shaft.

Pris 169,00 kr.

På fjernlager

Guitar Footrest
search

Guitar Footrest

SGS 017

Guitar foot rest with non-slip rubber surface

Pris 89,00 kr.

På fjernlager

Adapter 3/8" to 5/8"
search

Adapter 3/8" to 5/8"

D 801

Thread adapter for mic holder 5/8" to 3/8" chrome plated

Pris 29,00 kr.

På fjernlager

Drink Holder
search

Drink Holder

SDH 1

Drink holder for stands with diameter up to 23 mm for bottles, cups or glasses.

Pris 89,00 kr.

På fjernlager

Adapter 5/8" to 3/8"
search

Adapter 5/8" to 3/8"

D 800

Thread adapter for mic holder 5/8" to 3/8" chrome plated

Pris 19,00 kr.

På fjernlager

Camera Adapter 5/8" to 1/4"
search

Camera Adapter 5/8" to 1/4"

DCAM 1

Microphone stand adapter for camera, camcorder, mobile audio recorder or any other compatible gear with a 1/4" thread. Can be mounted on all microphone stands with 5/8" thread. The ball-head allows independent pan and tilt with 360° pan movement and 180°tilt.

Rubber padded platform to protect your device

Pris 79,00 kr.

På fjernlager

Gooseneck Mounting Plate
search

Gooseneck Mounting Plate

D 921 BLK

Gooseneck mounting plate with 3/8" thread to attach microphone goosenecks, such as offered by Gravity.

Pris 49,00 kr.

På fjernlager

28 mm TV Spigot with M10 Thread
search

28 mm TV Spigot with M10...

SLS TV28 M10

The SLSTV28M10 is a standard long shank 28 mm TV spigot with 10 mm thread and 34 mm thread depth. It is made of aluminium and comes with M10 hex bolt, washer and spring lock washer.

Pris 89,00 kr.

På fjernlager

Gooseneck Mounting Plate
search

Gooseneck Mounting Plate

D 921

Gooseneck mounting plate with 3/8" thread to attach microphone goosenecks such as those offered by Gravity.

Pris 49,00 kr.

På fjernlager

Mounting Bracket for Speakers
search

Mounting Bracket for Speakers

SPS 57
  • Speaker cabinet mounting flange
  • Black plastic
  • For speaker cabinets without built-in pole mounts
  • Requires no space inside the speaker cabinet
  • Fits all tripods with a diameter of 35 mm
Pris 49,00 kr.

På fjernlager

Adapter 28 mm (TV Spigot) to 35 mm
search

Adapter 28 mm (TV Spigot)...

SLS 36 TV 28

The adapter is ideally suited to position speakers, for example, on elevating tripods with TV28.

Pris 229,00 kr.

På fjernlager

Mounting fork for speaker stands
  • På tilbud!
  • -40,00 kr.
search

Mounting fork for speaker...

SPS 823

Loudspeaker mounting fork. Steel tube combination for 2 speakers fit into all 36 mm diameter top hats, with adjustable from 310 - 490 mm.

Pris 269,00 kr. Normalpris 309,00 kr.

På fjernlager

Guitar Stands
search

Guitar Stands

SGS 101

Universal guitar stand, black, for acoustic, bass and electric guitars, with anti-tip fastener

  • Very stable stand
  • Soft padding is suitable for all guitar finishes
  • Not suitable for long-term use with guitars that have a nitro lacquer finish
Pris 139,00 kr.

På fjernlager

Laptop Stand with Clamp
search

Laptop Stand with Clamp

SLT 001Thanks to its adjustable Height & Width the Adam Hall Laptop Stand will offer every DJ flexibility to the fullest!
Pris 319,00 kr.

På fjernlager

Universal Tablet Holder with Mutlifunctional Bracket
search

Universal Tablet Holder...

THMS 1

The THMS 1 is suitable for all standard tablets with screen sizes from 7.9 to 12.3 inches and can be easily attached to all round stand poles with a diameter of up to 35 mm and square-section tubes with a diameter of up to 25 mm. Adjustable arms keep your tablet stable and secure. The clever ball joint design is extremely flexible, enabling positioning for the perfect viewing angle. The durable, light design includes a useful, adjustable receptacle that can be used as a power bank repository or attached to the ball joint as a smartphone holder.

Pris 229,00 kr.

På fjernlager

Laptop Stand
search

Laptop Stand

SLT 003
  • Extremely rugged tripod laptop stand
  • Adjustable height
  • Adjustable-tilt mounting plate
Pris 459,00 kr.

På fjernlager

Laptop Stand
search

Laptop Stand

SLT 001 E

This tabletop stand is ideal to place your laptop, CD player or lighting controller into a convenient operating position. It holds equipment with a width of 22.5 cm or greater and is easily height adjustable from 17 to 34 cm. The stand is made of steel with a powder coat finish and fully collapsible for space-saving transport.

Pris 209,00 kr.

På fjernlager

Music Stand with LED Light
  • På tilbud!
  • -40,00 kr.
search

Music Stand with LED Light

SMS 17 SET 1

Professional, very stable, sturdy music stand for use in bands, orchestras or on the stage.

The SLED2Pro is a compact, handy light with a patented design intended for music stands. The 4 bright and efficient LEDs can be switched individually between 2 brightness levels. Also, the light cone is adjustable thanks to the flexible 220 mm long goosenecks.

Due to its long operating time, it is also suitable as a mobile reading lamp and multifunctional clip light for all lighting needs at home and on the go.

  • 2 flexible goosenecks
  • Clip fastening for music stand
  • Incl. Batteries (3 x AAA)
  • Dimensions (folded): 110 x 60 x 50 mm
Pris 329,00 kr. Normalpris 369,00 kr.

På fjernlager

Perforated Music Stand
  • På tilbud!
  • -30,00 kr.
search

Perforated Music Stand

SMS 2

The SMS 2 features a perforated sheet music support and folding tripod base of hard-wearing steel with durable black powder coating finish. Stand height and desk tilt angle are fully adjustable for use when seated or standing. The folding design and detachable desk tray facilitate storage and transport.

Pris 259,00 kr. Normalpris 289,00 kr.

På fjernlager

Telescopic music stand
  • På tilbud!
  • -30,00 kr.
search

Telescopic music stand,...

SMS 11 PRO

Professional and very stable, sturdy music stand for use by bands, orchestras or on stage. Thanks to its well designed compactness, it is very versatile and also the ideal companion for travelling.

Pris 229,00 kr. Normalpris 259,00 kr.

På fjernlager

LED Light for Music Stand
search

LED Light for Music Stand

SLED 24 PRO

Folding to ultra compact dimensions, the SLED 24 PRO music stand light provides uniform, glare-free illumination from a total of 24 warm white LEDs. The pivoting LED bar adjusts easily for optimum coverage, and the power switch includes three brightness level settings. Elegant and unobtrusive, the SLED 24 PRO features two padded spring clips for quick, secure attachment and can be mains and battery powered. It comes with a 5 V DC adapter, three size AAA batteries and fits into any accessory pouch.

Pris 499,00 kr.

På fjernlager

LED Dual Gooseneck Lamp With USB Connector
search

LED Dual Gooseneck Lamp...

SLED 2 ULTRA USB

The flexible light can be operated via any USB type A socket, and is perfect for mixers or racks. Both its goosenecks are 45 cm long and can be flexibly aligned to where the light is needed. Each is equipped with 4 particularly bright COB LEDs and individual on/off switches.

Pris 159,00 kr.

På fjernlager

LED Light for Music Stand
search

LED Light for Music Stand

SLED 1 PRO

The SLED1Pro is a compact, handy light with a patented design intended for music stands. The 2 bright and efficient LEDs can be switched individually between 2 brightness levels. Also, the light cone is adjustable thanks to the flexible 220 mm long gooseneck.

Due to its long operating time, it is also suitable as a mobile reading lamp and multifunctional clip light for all lighting needs at home and on the go.

Pris 99,00 kr.

På fjernlager

Gooseneck Lamp
search

Gooseneck Lamp, USB...

SLED 1 ULTRA USB

The SLED 1 ULTRA USB is a matt black gooseneck light with 4 extra bright white COB LEDs and USB connector. The 300 mm gooseneck is easily flexible yet stays put where you bend it, brightness is conveniently adjustable in 3 levels.

Pris 89,00 kr.

På fjernlager

LED Light for Music Stand
search

LED Light for Music Stand

SLED 10

The SLED10 is a very compact and handy light with a patented design intended for music stands. The 10 bright and efficient LEDs can be switched individually between 2 brightness levels. Also, the light cone is adjustable thanks to the flexible 220

mm long gooseneck.

Due to its long operating time, it is also suitable as a mobile reading lamp and multifunctional clip light for all lighting problems at home and on the go.

  • 10 white LEDs
  • Flexible gooseneck
  • Two-way adjustable brightness
  • Significantly lower power / battery consumption than other music stand lights
  • Clip mount
  • Incl. power pack, carrying case and batteries (3 x 1.5 V AA)
  • Dimensions (folded): 215 x 165 x 125 mm
Pris 329,00 kr.

På fjernlager

Music Stand
  • På tilbud!
  • -40,00 kr.
search

Music Stand

SMS 17

Professional, very stable, sturdy music stand for use in bands, orchestras or on the stage.

Pris 259,00 kr. Normalpris 299,00 kr.

På fjernlager

LED Light for Music Stand
search

LED Light for Music Stand,...

SLED 2 PRO W

The SLED2Pro is a compact, handy light with a patented design intended for music stands. The 4 bright and efficient LEDs can be switched individually between 2 brightness levels. Also, the light cone is adjustable thanks to the flexible 220 mm long goosenecks.

Due to its long operating time, it is also suitable as a mobile reading lamp and multifunctional clip light for all lighting needs at home and on the go.

  • 2 flexible goosenecks
  • Clip fastening for music stand
  • Incl. Batteries (3 x AAA)
  • Dimensions (folded): 110 x 60 x 50 mm
Pris 129,00 kr.

På fjernlager

USB Gooseneck Lamp with 2 LEDs
search

USB Gooseneck Lamp with 2 LEDs

SLED 1 USB PRO

The SLED1USBPRO is a compact, USB Goosebeck Light with 2 LEDs.

The 2 bright and efficient LEDs can be switched individually between 2 brightness levels. Also, the light cone is adjustable thanks to the flexible 200 mm long gooseneck.

Works on any PC or MAC USB port and is therefore also ideal for working on the laptop, if you do not want to illuminate the whole room.

  • Flexible gooseneck 200 mm
  • 2 pcs white LED
  • USB connector
Pris 59,00 kr.

På fjernlager

Keyboard Stand
  • På tilbud!
  • -150,00 kr.
search

Keyboard Stand, Black - 8 stk.

SKS 04

This stable, very compact X-keyboard stand made from black powder-coated steel is conveniently adjustable in 5 increments from 64 to 98 cm in height. The broad surfaces provide a good grip of the instrument with ridged rubber rings.

The SKS04 is offered in packs of 8 individually wrapped units including an attractive POS packing box.

Pris 1.859,00 kr. Normalpris 2.009,00 kr.

På fjernlager

Double keyboard stand
  • På tilbud!
  • -150,00 kr.
search

Double keyboard stand

SKS 22 XB

Designed for 2 professional keyboards

Heavy load capacity

Base plate is made of steel

  • SKS22XBAG gig bag available
  • SKS22MB optional mic. boom arm available
Pris 1.709,00 kr. Normalpris 1.859,00 kr.

På fjernlager

Universal stand for keyboards and equipment
  • På tilbud!
  • -50,00 kr.
search

Universal stand for...

SKS 05

The SKS 05 carries equipment such as keyboards, mixers or amplifiers safely and reliably. This versatile stand is adjustable in height and length and features a particularly solid construction which makes it suitable for loads of up to 50kg. The stand can be folded to a compact format for easy transportation.

Pris 469,00 kr. Normalpris 519,00 kr.

På fjernlager

Keyboard Stand black
  • På tilbud!
  • -30,00 kr.
search

Keyboard Stand black

SKS 01

X-frame keyboard stand

Standard, ideal for beginners

Pris 259,00 kr. Normalpris 289,00 kr.

På fjernlager

Folding Keyboard Bench With Extra Thick Padding
search

Folding Keyboard Bench With...

SKT 17

The SKT 17 is an ultra comfortable single X brace keyboard bench with a 52 x 24 cm high density foam padded seating area and adjustable height from 36 to 52 cm. The durable construction is made of black powder coated heavy duty steel. The legs feature non-slip rubber ends and fold completely flat for easy transport and space saving storage.

Pris 439,00 kr.

På fjernlager

LD Systems Speaker pole with mounting fork for DAVE 10 G4X
  • På tilbud!
  • -50,00 kr.
search

LD Systems Speaker pole...

DAVE 10 G4X DUAL STAND

The custom-fit set of distance pole and stand fork, in conjunction with the cluster mode of the DAVE G4X system, enables interference-free clustering of the DAVE 10 G4X satellites.

How does it work?

For this purpose, there is a special preset (Cluster Mode) with a special M/S distribution to reproduce the stereo signal without interference. This way, you also get more headroom and directivity.

The T-Stand allows two DAVE 10 G4X satellites to be mounted close together on to the subwoofer. The speaker pole is made of powder coated steel with an M20 bottom end thread. It features a steel collar with set screw and safety pin for secure height adjustment. With the simple height adjustment, the stand can be quickly and easily set to the desired height, offering a maximum height of 1.45 metres (excl. subwoofer). The base tube can be disassembled for a transport length of 58 cm only.

For larger events, the set can also be used to build a larger stereo setup by connecting two DAVE 10 G4X systems in cluster mode through a mixing console.

Pris 449,00 kr. Normalpris 499,00 kr.

På fjernlager

LD Systems Speaker Cable 8 m for CURV 500
search

LD Systems Speaker Cable 8...

CURV 500 CABLE 4

Speaker Cable Standard Speaker Connector to Standard Speaker Connector 8 m for CURV 500®

Pris 259,00 kr.

På fjernlager

LD Systems Speaker Cable 2.2 m for CURV 500
search

LD Systems Speaker Cable...

CURV 500 CABLE 1

Speaker Cable Standard Speaker Connector to Standard Speaker Connector 2.2 m for CURV 500®

Pris 159,00 kr.

På fjernlager

LD Systems Speaker Cable with Terminal Block 3 m for CURV 500
search

LD Systems Speaker Cable...

CURV 500 CABLE 2

Speaker cable with standard speaker plugs on terminal block 3 m for CURV 500®

Pris 189,00 kr.

På fjernlager