Recessed Extendable Handle...
Recessed extendable handle
Entire assembly mounts inside case, handle is recessed.
På fjernlager
.
Filtrer efter
Status
Selections
Mærker
Pris
9,00 kr. - 34.239,00 kr.
Der er 1193 varer.
Aktive filtre
Recessed extendable handle
Entire assembly mounts inside case, handle is recessed.
På fjernlager
Back plate for recessed handle 34082. Backing Plate for use with wood > 8 mm.
På fjernlager
Wire lid stay - flexible stainless steel wire.
På fjernlager
Piano hinge - punched at 76 mm centres
På fjernlager
Drawbolt medium, with key
Replacement key has the part number 1903KEY
På fjernlager
Recessed lever latch for service door. Black plastic (POM). Mounts into wood thickness from 7-13 mm. Stainless steel screws.
På fjernlager
This sliding latch system was developed especially for small panels, doors or similar applications. In doing so, we emphasized minimising the installed height of the latch system in order to cover as many areas of application as possible.
På fjernlager
This sliding latch system was developed especially for small panels, doors or similar applications. In doing so, we emphasized minimising the installed height of the latch system in order to cover as many areas of application as possible.
På fjernlager
Galvanized screw with integrated gear rim and washer for easy mounting of substructure rollers.
På fjernlager
Galvanized screw with integrated gear rim and washer for easy mounting of substructure rollers.
På fjernlager
The SP1 Sustain Pedal is designed to work and feel just like the sustain pedal of an acoustic piano. This highquality pedal features a polarity switch to select either the normally open or the normally closed mode. Thanks to the rubber coated housing the SP1 grips efficiently to the floor and stays put while you play. This high end damper pedal is compatible to almost any electronic keyboard featuring a 1/4_ input jack.
På fjernlager
The ah PAD series is designed to isolate studio monitors acoustically, i.e., avoid disturbing resonances with the surface on which they stand, which results in a significantly improved sound. The two-component design results in three possible combinations (horizontal placement + two different angles.
På fjernlager
Thanks to its properties, embossed Cayman imitation leather is ideal for use as a covering material in loudspeaker construction. Cayman impresses with its fine appearance and appealing quality. Its fabric backing enables a firm and durable bonding.
På fjernlager
fixed castor in 2 mm steel frame
Distance of mounting holes: 60 x 80 mm
På fjernlager
372151Swivel Castor
På fjernlager
372191Swivel Castor
På fjernlager
Handle consisting of a black plastic dish and a sturdy ring handle made of black powder-coated die-cast zinc. By virtue of the two additional handholds, extremely ergonomic and especially suitable for carrying larger speakers in front of the body.
På fjernlager
På fjernlager
Recessed steel Bar Handle for top edge mounting.
På fjernlager
Insert handle - in two parts
På fjernlager
Strap Handle, black webbing covered with black rubber.
På fjernlager
Back Plate for 5720 Cargo Restraint Track
På fjernlager
Lashing point in black anodised aluminium. Specially designed for subsequent mounting on a speaker cabinet, for example. The flexibly mountable panel has a direct tensile load-bearing capacity of up to 500 daN.
På fjernlager
På fjernlager
Cargo Restraint Track
Fixings M6 x 40 countersunk
På fjernlager
Cargo Restraint Track
Fixings M6 x 40 countersunk
På fjernlager
Insulating wadding for loudspeaker boxes and sound absorption
På fjernlager
The SM7DT is a mounting flange with 0° and 5° horizontal tilt for loudspeaker cabinets on speaker stands. Thus, the dispersion of the high frequencies can be controlled and adjusted according to the location. With the 5° tilt, the speaker can be tilted forwards as well as tilted to the rear (depending on the direction of installation of the flange). The flange has a 75 mm installation depth and is made of black powder-coated aluminium and is suitable for a 35 mm tube diameter.
På fjernlager
Die casting zinc plate may be used with distance rod SPS822.
På fjernlager
Mounting plate for 2 powerCON TRUE1 sockets
Cutout: 115 x 67 mm
På fjernlager
På fjernlager
Midi Clip white (load up to 100 kg) for mounting Molton, tarpaulins, etc. This clip is especially suitable for mounting Molton fabrics without eyelets, or for fabrics that do not have any other mounting option. The Molton fabric is easily inserted between the clip and secured, without damaging the material.
På fjernlager
På fjernlager
Vægt (Emb.) | 60g |
Rumfang (Emb.) | 0.00074025 |
Bredde (Emb.) | 94mm |
Længde (Emb.) | 225mm |
Højde (Emb.) | 35mm |
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.