Palmer Padded Softcase for...
Padded carrying bag for Palmer MI PEDALBAY® 40
På fjernlager
.
Filtrer efter
Status
Mærker
Pris
49,00 kr. - 9.909,00 kr.
Der er 80 varer.
Padded carrying bag for Palmer MI PEDALBAY® 40
På fjernlager
Padded carrying bag for Palmer MI PEDALBAY® 50 S
På fjernlager
Padded softcase for Palmer MI PEDALBAY® 60
På fjernlager
The PEDALBAY® 40 PB set combines the Palmer PEDALBAY® 40 and the Palmer WT PB 40 power supply with 8 single-isolated outputs. Due to the patented integration, the power supply can be exchanged and fixed with the rear rail of the PEDALBAY® 40. A separate transport for power supply and PEDALBAY® is no longer necessary.
På fjernlager
Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy!
This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.
På fjernlager
Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars as well as the height and the tilt of the Pedalboard can be individually adjusted. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy!
This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.
På fjernlager
Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars as well as the height and the tilt of the Pedalboard can be individually adjusted. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy!
This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.
På fjernlager
Small 1-5W amps have become very popular in recent years. They are fun items but some seem more like toys than real amplifiers. Palmers approach with the EINS was to design a serious true tube amplifier for professional purposes. The speaker simulated output allows you to connect the output of the amp directly to your audio interface. Thanks to the integrated loadbox a speaker does not need to be connected. Thanks to the unique _HiZ output_ you can connect the output of the EINS directly to the input of any amplifier! This way the EINS can be power boosted or used as a preamp or even on your pedalboard.
The Palmer EINS comes with an ECC83 preamp tube (V1) and an ECC82 (V2) power stage tube as standard. Other tube configurations are possible as follows.
På fjernlager
Protective Cover for Palmer 2 x12" Cabinets
På fjernlager
Castor set with 4 castors (2 brakes) incl. screws for bass or guitar cabinets
På fjernlager
The Palmer DUETTO is a small format active mixer. Input sensitivity and impedance are optimised for electric guitar applications but the unit also works well with other instruments and devices with line level signals.
The DUETTO allows two active sources to be mixed to a single amplifier input. Each input has a volume controller for level adjustment. The DUETTO is typically used when guitar teachers want to practise with their students through a single input amp. The DUETTO is however very versatile and can also be used, for example, as cable driver, mono merger and recording preamp.
Due to its low power consumption, the DUETTO can be powered by a 9V battery permitting extended operation. A DC input is provided for use with a power adapter.
På fjernlager
The Palmer PEABI is more than a simple switcher for two sources, it also provides level adjustment of microphone or line signals. Whether microphone or line signal, the PEABI toggles silently between the two inputs permitting fast and simple signal comparison and the connection of two sources to one input. Three slide switches select 15 dB of attenuation for input A and 6, 15 or 21 dB for input B. A ground lift switch eliminates earth loop hum. The PEABI is housed in a solid metal case with extended edges for optimum protection of the inputs and output. A red LED clearly indicates which input is active.
Pre-drilled holes permit simple and secure mounting in a rack or on a pedalboard.
The PEABI's circuitry is all-passive. A 9 V block battery is required to power the LED.
På fjernlager
Palmer PEABO is a Balanced Line Output Switch with one input and two outputs. Thus, it is the perfect choice for routing a signal to either one of two possible inputs.
Switch your vocal mic between the FOH and monitor mixing desk to communicate with the monitor mixer or the band on stage.
Two different sound configurations: to switch between different effects or sounds on your microphone, e.g. a "telephone effect" or more levels of reverb. Run the outputs of the PEABO into two channels of the mixing desk, that you can configure differently. Now you can freely toggle between them on-stage at any time.
You can also use the PEABO to route the signal to two rooms or zones and select either one.
Switching is controlled by a sturdy foot switch; the selected output is indicated by a red LED. Slide switches select 15 dB of attenuation for output A and 6, 15 or 21 dB for output B. A ground lift switch eliminates earth loop hum. The PEABO is housed in a solid metal case with extended edges for optimum protection of the input and outputs. Pre-drilled holes permit simple and secure mounting in a rack or on a pedalboard.
The PEABO's circuitry is all-passive. A 9V block battery is required to power the LED.
På fjernlager
"When I run my guitar into two amps simultaneously, I always get a loud hum". This is a rather common problem, often discussed in the technology section of relevant industry magazines. The Palmer Y box is the solution. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended.
The PGA03 Y-box can also be used as a line driver for long cable runs. Also, the PGA03 features a phase reverse switch for the AMP 2 output when using pre-amps or amps that are out of phase.
På fjernlager
Ambitious guitarists often use two amplifiers in order to obtain different basic sounds. However, transport, space restrictions and the decrease in output associated with PA speakers can be very inconvenient. This is where TINO S promises to help. The switcher system allows you to use two amplifiers with only one box as an alternative. Regardless of whether you use tube amplifiers that require getting a load, or transistor models. Even a mixed combination is possible without any problems.
The switch-over between the amplifiers can be operated via a pressure switch on the device or via an optional standard foot switch or switching system. If the switch cannot be done with a switching system, a standard foot switch can be connected to the corresponding 6.3 mm jack. (Requires a switch, not push-buttons!)
TINOS routes the guitar signal to the chosen amplifier, while the second unused amplifier is turned off to prevent unwanted interference. (As if the potentiometer on the guitar was switched off). The gain from the instrument input to output is one (Unity Gain). The built-in buffer only converts the impedance, so that a high-impedance guitar becomes less prone to interference. When the guitar signal is switched, the speaker is switched simultaneously, while the speaker output from the mute amplifier is connected to a load (Dummy Load). Therefore, tube amplifiers are absolutely safe from dangerous idling.
If you connect two amplifiers with one another, a heavy buzzing sound often overlays the guitar signal. This undesirable effect is known as ground loop and occurs between mains-operated devices because of double grounding. The TWO IN ONE prevents this from happening by decoupling the outputs to the amplifiers using high-quality isolating repeaters.A smooth switching between the amplifiers also ensures that the process takes place without crackling in the loudspeaker. The power supply is provided via the supplied 9V power adapter.
På fjernlager
The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM!
In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way.
På fjernlager
Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds.
På fjernlager
Special DI box with loadbox for guitars. The integrated load resistor permits tube amplifiers up to approximately 120 W to be connected to the PGA04, bypassing a loudspeaker. A jack socket (unbalanced) and balanced XLR connector are available for direct pickup of the signal. The extensive filter section provides for a realistic simulation of classic guitar loudspeaker sounds.
På fjernlager
The PDI06 is a power attenuator for live applications. The device is connected between the amplifier output and the speaker cabinet. It makes it possible to use the popular power stage distortion of tube amplifiers while reducing the associated high volume level. This permits practical volume reduction in five increments from 100% to 18% for stage and practice room situations. An additional level makes the speaker completely mute; the PDI06 then functions as a LOAD BOX and absorbs the entire output power of the amplifier.
This mode of operation is useful, for example, when connecting an amplifier equipped with a speaker cabinet emulation directly to the mixing desk using an existing line-out and loud volume levels in the recording booth are undesirable. The unit has an input for the speaker signal from the amplifier and two outputs for connecting speaker cabinets.
The total impedance of the speakers must equal the value shown on the PDI06. Example: the outputs of a PDI06, that is specified for 8 ohms, can be connected to one 8 ohm cabinet or two 16 ohm cabinets (the 16 ohm version has only one output). The output of the (tube) amplifier is also set to 8 ohms.
På fjernlager
The PDI 03 JB Speaker Simulator is a professional passive DI box for guitar amps. Providing a frequency compensated, transformer balanced direct feed to mixing consoles or soundcards it connects between the amplifier output and loudspeaker or equivalent dummy load. The PDI 03 JB has been developed for live, studio and home recording applications to eliminate the need for time consuming mic placement and mic-related problems.
Designed to Joe Bonamassa's high standards for a huge but tightly focused tone the exclusive JB switch brings the output signal to the fore and takes it "right in your face." The PDI 03 JB's dual speaker simulation filters are carefully voiced to authentically replicate the frequency response of classic and contemporary loudspeakers and cabinets. The unit's input sensitivity is adjustable for amps up to 200 watts or line and instrument level equipment.
Delivering consistent guitar tone from show to show the PDI-03 JB can also be used to add realistic speaker flavors to preamps and dirt boxes in direct recording applications. The rugged powder coated steel enclosure features high quality Amphenol connectors and a ground lift to remove hum resulting from earth loops.
For amp DI WITHOUT speakers a dummy load with matching impedance must be connected. We recommend the Palmer Power Attenuator PDI06 and the Palmer Dual Load Box PLB2X8.
På fjernlager
The PDI06 is a power attenuator for live applications. The device is connected between the amplifier output and the speaker cabinet. It makes it possible to use the popular power stage distortion of tube amplifiers while reducing the associated high volume level. This permits practical volume reduction in six increments from 100% to 18% for stage and practice room situations. An additional setting mutes the speaker completely; the PDI06 then functions as a LOAD BOX and absorbs the entire output power of the amplifier.
This mode of operation is useful, for example, when connecting an amplifier equipped with a speaker cabinet emulation directly to the mixing desk using an existing line-out and loud volume levels in the recording booth are undesirable. The unit has an input for the speaker signal from the amplifier and two outputs for connecting speaker cabinets.
The total impedance of the speakers must equal the value shown on the PDI06. For example: the outputs of a PDI06 that is specified for 8 ohms can be connected to one 8 ohm cabinet or two 16 ohm cabinets (the 16 ohm version has only one output). The output of the (tube) amplifier is also set to 8 ohms.
På fjernlager
The Supreme Soaker allows guitar players to maximise the potential of their tube amps in a way that has never been possible - until now. As a reactive attenuator and load box with a finely tuned analogue speaker simulator built in, the Supreme Soaker allows guitarists to permanently dial in their amp's sweet spot - at any volume - and it will quickly become their go-to device in any musical situation, from playing and recording at home to rehearsing with a band, and even playing live_ without sacrificing one iota of their precious guitar tone.
Whether it's for jamming at home, recording their own music or playing with others - or all of the above - the Supreme Soaker is the perfect way to do that, while keeping the guitar/amp signal pristine and analogue at all times.
Here are just some of the Supreme Soaker's key benefits:- Reactive attenuator and load box: dial in a tube guitar amp's sweet spot at any volume, from zero (either by using headphones or recording silently) to room levels, to the boundaries of what's acceptable noise-wise_ with no speaker cabinet required!
- Finely-tuned analogue speaker simulator: tweak the guitar rig's tone as necessary to reveal its ultimate tones - no need to mic up a cab ever again!
- Speaker output with unique tone control: shift the tonal palette of the speaker cabinet to conjure up new iconic worlds of sound.
- Microphone/line input (blendable with speaker simulator): blend a miked up cab with the Supreme Soaker's speaker simulator for a supreme analogue sound experience.
- Front panel headphone output: perfect for silent practice any time inspiration strikes.
- Stereo FX Loop: for guitar players who love their FX pedals, the Supreme Soaker features a stereo FX Loop for creating otherworldly soundscapes with delays, reverbs and so on.
- Front panel aux input: for jamming along to backing tracks, or even playing to a click! It couldn't be any easier with the Supreme Soaker.
- Balanced stereo XLR Line Outputs: when it comes to recording the sounds of a guitar amp, it doesn't get any easier.
- Compatible with 8 and 16-ohm setups:works flawlessly with 99% of tube amps.
- Rated for amps up to 150 Watts: perfect for taming even the stadium filling full-size tube amp heads of yore! With the Supreme Soaker, every guitar player has a reason to dust off that full stack again!
- Amp protecting circuit with permanent amp load: never worry about plugging in an amp without a speaker connected again!
- All-analogue experience, with no App required! Perhaps most importantly of all, the Supreme Soaker is simple, direct and pure: the guitarist's analogue tone is preserved at all times, and all the controls they need are on the unit itself, so they can focus on the most important thing: making music!
And that's just the start. The Supreme Soaker will quickly become an indispensable tool for guitar players everywhere when it comes to their music making and creative endeavours. Its unparalleled tonal response, user experience and connectivity options are sure to make it the cornerstone of many a rig from now on - and family members, neighbours and audiences will thank Supreme Soaker players too!
Finally, for us - the Palmer team - this is the culmination of a long-term goal, the realisation of a decades-long dream in sound. We've been the industry leader in analogue tonal solutions for musicians and sound engineers for over 40 years. Now, building on the legacy of the award-winning PDI-09 and PDI-03 speaker simulators and the PDI-06 Attenuator and Load Box, our designers and engineers have applied their decades of experience to the development of the Supreme Soaker.
På fjernlager
Keep your microphones, in-ear monitors, effect pedals and other battery-powered devices operational at all times with the professional 19" Palmer BC 400 9V V1 battery charger . It is controlled by a micro-controller and charges up to eight 9V block batteries at the same time. including a combination of each. Charging stations for two 9-volt blocks are available as accessories, and can be combined as needed with the AA/AAA charging stations.
The Palmer 19" quick charger monitors the charging status of each individual battery, identifies defective batteries, and protects against overcharging and short-circuiting. The built-in multi-voltage power supply facilitates worldwide use. The Palmer BC 400 9V V1 includes eight rechargeable Varta 9V block batteries
På fjernlager
The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.
Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.
Attention:The MACHT 402 is unsuitable for direct connection to a guitar. Please include a preamp, modeller or an effect pedal in between.
På fjernlager
Keep your microphones, in-ear monitors, effect pedals and other battery-powered devices operational at all times with the professional 19" Palmer BC 400 AAA V1 battery charger. It is controlled by a micro-controller and charges up to 16 AAA or AA batteries at the same time, including a combination of each. Charging stations for two 9-volt blocks are available as accessories, and can be combined as needed with the AA/AAA charging stations.
The Palmer 19" quick charger monitors the charging status of each individual battery, identifies defective batteries, and protects against overcharging and short-circuiting. The built-in multi-voltage power supply facilitates worldwide use. The Palmer BC 400 AAA V1 includes 16 rechargeable Varta AAA batteries.
På fjernlager
Working with effects units and patchbays in the studio opens up creative possibilities for discovering new sounds. If it weren't for the hassle of power supply and the accompanying cable clutter.
For this very reason, Palmer® offers the Powerbar WT PB 40 RK, which you can install in a 19" rack and thus always have a 9V DC output at hand.
The rack-mountable power supply helps you keep the studio table tidy and your signal chain stable. Eight separately insulated centre-negative outputs make sure that digital noise does not sneak into your recordings. Two of these individually isolated outputs can be switched to either 9, 12 or 18 volts for additional flexibility.
The Palmer® WT PB 40 RK simplifies the creative work with your effects devices and helps keep your studio desk or live rack organised.
På fjernlager
With the PWC6 you can power up to 6 units from one single power outlet. Considering that most common effects have a power consumption of approx. 20mA, a 300mA power supply such as the Palmer PW9V can thus often suffice to power 6 units.
På fjernlager
Attention stage-musicians: The Palmer Powerbar greatly reduces your gig set-up time thanks to the universal power supply which can be completely and discreetly integrated into the pedalboard. Simply replace the first crossbar with the power supply to experience the familiar high quality: Eight single isolated centre-negative outputs of which two are switchable outputs of 9, 12 or 18 volts for added flexibility. Optimum performance is provided by a total current of 2,000 mA. The best thing: no more forgotten power supplies or unnecessary cable clutter on-stage means no more stress.
På fjernlager
Leave the noise behind!
A pedalboard can be a noisy place, and choosing the right power supply can make a big difference to the noise level and clarity of your guitar tone. And that's where the PWT 06 IEC comes in. With six high current, individually isolated, ultra low noise outputs - each with its own dedicated regulator and custom isolated transformer - the PWT 06 IEC represents the next generation of Palmer® isolated pedal power supplies. Featuring one variable voltage output, the PWT 06 IEC lets you adjust the voltage between 6 and 18 volts, giving you even more headroom to run your overdrive pedals, as well as the "dying battery" sound that many guitarists love. In addition, the Palmer PWT 06 IEC has a USB C and USB A output with 18W so you can charge your mobile devices or even power your MIDI keyboards. We designed the PWT 06 IEC to address guitarists' main pain points when it comes to powering their precious effects pedals, so you can perform with complete peace of mind, knowing that your pedals and rig will sound as good as they can.
På fjernlager
Leave the noise behind
A pedalboard can be a noisy place, and choosing the right power supply can make a big difference to the noise level and clarity of your guitar tone. That's where the PWT 12 IEC comes in. With 12 high current, individually isolated, ultra low noise outputs - each with its own dedicated regulator and custom isolated transformer - the PWT 12 IEC represents the next generation of Palmer® isolated pedal power supplies. Featuring two variable voltage outputs, the PWT 12 IEC lets you adjust the voltage between 6 and 18 volts, giving you even more headroom to run your overdrive pedals, as well as the "dying battery" sound that many guitarists love.In addition, the Palmer PWT 12 IEC has a USB C and USB A output with 18W so you can charge your mobile devices or even power your MIDI keyboards. We designed the PWT 12 IEC to address guitarists' main pain points when it comes to powering their precious effects pedals, so you can perform with complete peace of mind, knowing that your pedals and rig will sound as good as they can.
På fjernlager
Keep your microphones, in-ear monitors, effect pedals and other battery-powered devices operational at all times with the professional 19" Palmer BC 400 AA V1 battery charger. It is controlled by a micro-controller and charges up to 16 AA or AAA batteries at the same time, including a combination of each. Charging stations for two 9-volt blocks are available as accessories, and can be combined as needed with the AA/AAA charging stations.
The Palmer 19" quick charger monitors the charging status of each individual battery, identifies defective batteries, and protects against overcharging and short-circuiting. The built-in multi-voltage power supply facilitates worldwide use. The Palmer BC 400 AA V1 includes 16 rechargeable Varta AA batteries.
På fjernlager
The PWT 04 is a universal pedalboard power supply with 1,000 mA output capacity and 4 standard centre negative 9 V DC single isolated outputs. Featuring short circuit and overload protection, the PWT 04 is fully regulated to deliver constant voltage. The unit sports a power on LED, and comes with a set of DC cables and dedicated mains adapter.
På fjernlager
Attention stage-musicians: The Palmer Powerbar greatly reduces your gig set-up time thanks to the universal power supply which can be completely and discreetly integrated into the pedalboard. Simply replace the first crossbar with the power supply to experience the familiar high quality: Eight single isolated centre-negative outputs and two switchable outputs of 9, 12 or 18 volts for added flexibility. Optimum performance is provided by a total current of 2,000 mA. The best thing: no more forgotten power supplies or unnecessary cable clutter on-stage means no more stress.
På fjernlager
With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MKII is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are single isolated.
The PWT 05 MKII is protected against overloading and comes with 25 and 50 cm long connection cables, as well as two Y-cables. The first one, with a black connector, connects two 9 V outputs to increase the current intensity to a massive 500 mA, the other one, with a white connector, connects two 9 V outputs to double the voltage to 18 V. Also included is a 1-into-5 daisy chain that lets you power five pedals from one output if their total current draw does not exceed 250 mA. The rugged enclosure of the Palmer PWT 05 MKII provides mounting and cable relief options while the IEC mains inlet and voltage selector enable worldwide use.
På fjernlager
The PWT 08 MK2 power supply stands out with its slim design, which easily fits under almost any pedal boards. The total capacity of 2,000 mA is distributed over eight individually isolated 9V DC outputs.
Two of the outputs are adjustable between 6 and 18 volts to simulate the voltage drop of old batteries, or to feed effects pedals with higher voltage requirements. In addition, these two individually isolated outputs provide 500 mA each, making them ideal for digital effects pedals with high current requirements. The other six individually isolated outputs provide 300 mA each.
The PWT 08 MK2 power supply is regulated for a stable voltage supply, and is protected against short circuit and overvoltage issues. The PWT 08 MK2 pedalboard power supply is also equipped with a power LED on the input socket, and a two-colour LED on all outputs to indicate output status.
It comes with the appropriate US/UK/EU power adapter and a complete set of DC cables.
The PWT 08 MK2 is the ideal solution for a low-noise pedalboard that features power-hungry effects pedals.
På fjernlager
The PWT 12 is a heavy duty (2000 mA) universal pedal board power supply with 12 single-isolated 9 V DC, centre-negative female pin-connector outputs. The variable outputs enable the simulation of voltage drop or 'battery sag' in old batteries. The power supply is regulated for constant voltage supply and protected against short circuit and overloading. The PWT 12 is equipped with a power LED and a two-colour LED output status indicator. It is supplied with an AC adapter and a set of DC cables. The PWT 12 is the ideal solution for power-hungry foot pedals or 9-volt effects units that can be operated at higher voltages for increased dynamics and stability.
På fjernlager
The PEDALBAY® 60 PB set combines the Palmer PEDALBAY® 60 and the Palmer WT PB 60 power supply with 8 single-isolated outputs. Due to the patented integration, the power supply can be exchanged and fixed with the rear rail of the PEDALBAY® 60. A separate transport for power supply and PEDALBAY® is no longer necessary.
På fjernlager
Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars as well as the height and the tilt of the Pedalboard can be individually adjusted. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy!
This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.
På fjernlager
Universal aluminium Pedalboard for the storage of all commercially available floor effects. The cross bars as well as the height and the tilt of the Pedalboard can be individually adjusted. The cross bars are already covered with Velcro (fleece), a sufficient amount of hook strap is also included. Power supplies and similar peripheral devices can be mounted below the board. For this the Pedalboard features 4 practical hooks on the underside. 2 Elastic bands are supplied - making fixation easy!
This set also features a high-quality padded softcase with an accessory compartment and a shoulder strap.
På fjernlager
Unleash the true potential of your guitar amp with the new line of Palmer® guitar amp cabinets!
It is well known, that the guitar amp cabinet and its speaker play a significant role in the overall sound of your guitar. After many years of amp and cabinet building, we at Palmer® are well aware of this and have developed the second generation of our popular guitar amp cabinets.
This cabinet features the legendary Celestion® Creamback speaker, which is known for its extended headroom along with a warm and punchy sound. The cabinet features a closed back design allowing for a powerful and very direct sound dispersion. Plus, its removable front grille comes in handy for placing your mic even closer to the speaker, as well as allowing for quick speaker swaps.
The Palmer® 2 x 12 closed back guitar speaker cabinet is made of a robust and durable housing that will withstand the heavy strains of touring.
So whether you're touring, recording in the studio or simply practicing at home, the Palmer® 2 x 12 closed-back gives you the versatility you need to be true to your sound.
På fjernlager
Unleash the true potential of your guitar amp with the new line of Palmer® guitar amp cabinets!
It is well known, that the guitar amp cabinet and its speaker play a significant role in the overall sound of your guitar. After many years of amp and cabinet building, we at Palmer® are well aware of this and have developed the second generation of our popular guitar amp cabinets.
This cabinet model is equipped with the legendary Celestion® Greenback speaker, which is known for its creamy sound and a forward punchy attitude.
The open-back cabinet simultaneously creates a more present sound in the room and provides greater sound design options when recording in the studio, as the sound of cabinet can be picked up from both the front and the rear end. Plus, its removable front grille comes in handy for placing your mic even closer to the speaker, as well as allowing for quick speaker swaps.
The Palmer® 2 x 12 open back guitar speaker cabinet is made of a robust and durable housing that will withstand the heavy strains of touring.
So whether you're touring, recording in the studio or simply practicing at home, the Palmer® 2 x 12 open-back gives you the versatility you need to be true to your sound.
På fjernlager
Unleash the true potential of your guitar amp with the new line of Palmer® guitar amp cabinets!
It is well known, that the guitar amp cabinet and its speaker play a significant role in the overall sound of your guitar. After many years of amp and cabinet building, we at Palmer® are well aware of this and have developed the second generation of our popular guitar amp cabinets.
This cabinet features two legendary Celestion® Creamback speakers, well known for their increased headroom along with a warm and punchy sound.
The open-back cabinet simultaneously creates a more present sound in the room and provides greater sound design options when recording in the studio, as the sound of cabinet can be picked up from both the front and the rear end. Plus, its removable front grille comes in handy for placing your mic even closer to the speaker, as well as allowing for quick speaker swaps.
The Palmer® 2 x 12 open back guitar speaker cabinet is made of a robust and durable housing that will withstand the heavy strains of touring.
So whether you're touring, recording in the studio or simply practicing at home, the Palmer® 2 x 12 open-back gives you the versatility you need to be true to your sound.
På fjernlager
Unleash the true potential of your guitar amp with the new line of Palmer® guitar amp cabinets!
It is well known, that the guitar cabinet and its speaker play a significant role in the overall sound of your guitar. After many years of amp and cabinet building, we at Palmer® are well aware of this and have developed the second generation of our popular guitar amp cabinets.
This cabinet model is equipped with the legendary Celestion® Greenback speaker, which is known for its creamy sound and a forward punchy attitude.
The open-back cabinet simultaneously creates a more present sound in the room and provides greater sound design options when recording in the studio, as the sound of cabinet can be picked up from both the front and the rear. Plus, its removable front grille comes in handy for precision mic positioning, as well as allowing for quick speaker swaps.
The Palmer® 1 x 12 open back guitar speaker cabinet is made of a robust and durable housing that will withstand the heavy strains of touring.
So whether you're touring, recording in the studio or simply practicing at home, the Palmer® 1 x 12 open-back gives you the versatility you need to be true to your sound.
På fjernlager
Unleash the true potential of your guitar amp with the new line of Palmer® guitar amp cabinets!
It is well known, that the guitar amp cabinet and its speaker play a significant role in the overall sound of your guitar. After many years of amp and cabinet building, we at Palmer® are well aware of this and have developed the second generation of our popular guitar amp cabinets.
This cabinet model is equipped with two legendary Celestion® Vintage 30 speakers, which are known for their increased headroom, powerful mids and punchy sound. The open-back cabinet simultaneously creates a more present sound in the room and provides greater sound design options when recording in the studio, as the sound of cabinet can be picked up from both the front and the rear end. Plus, its removable front grille comes in handy for placing your mic even closer to the speaker, as well as allowing for quick speaker swaps.
The Palmer® 2 x 12 open back guitar speaker cabinet is made of a robust and durable housing that will withstand the heavy strains of touring.
So whether you're touring, recording in the studio or simply practicing at home, the Palmer® 2 x 12 open-back gives you the versatility you need to be true to your sound.
På fjernlager
Unleash the true potential of your guitar amp with the new line of Palmer® guitar amp cabinets!
It is well known, that the guitar amp cabinet and its speaker play a significant role in the overall sound of your guitar. After many years of amp and cabinet building, we at Palmer® are well aware of this and have developed the second generation of our popular guitar amp cabinets.
This cabinet model is equipped with the legendary Celestion® Greenback speaker, which is known for its creamy sound and a forward punchy attitude. The cabinet features a closed back design allowing for a powerful and very direct sound dispersion. Plus, its removable front grille comes in handy for placing your mic even closer to the speaker, as well as allowing for quick speaker swaps.
The Palmer® 2 x 12 closed back guitar speaker cabinet is made of a robust and durable housing that will withstand the heavy strains of touring.
So whether you're touring, recording in the studio or simply practicing at home, the Palmer® 2 x 12 closed-back gives you the versatility you need to be true to your sound.
På fjernlager
Unleash the true potential of your guitar amp with the new line of Palmer® guitar amp cabinets!
It is well known, that the guitar amp cabinet and its speaker play a significant role in the overall sound of your guitar. After many years of amp and cabinet building, we at Palmer® are well aware of this and have developed the second generation of our popular guitar amp cabinets.
This cabinet features the legendary Celestion® Creamback speaker, which is known for its extended headroom along with a warm and punchy sound.
The open-back cabinet simultaneously creates a more present sound in the room and provides greater sound design options when recording in the studio, as the sound of cabinet can be picked up from both the front and the rear end. Plus, its removable front grille comes in handy for placing your mic even closer to the speaker, as well as allowing for quick speaker swaps.
The Palmer® 1 x 12 open back guitar speaker cabinet is made of a robust and durable housing that will withstand the heavy strains of touring.
So whether you're touring, recording in the studio or simply practicing at home, the Palmer® 1 x 12 open-back gives you the versatility you need to be true to your sound.
På fjernlager
The Palmer 2 x 12 empty guitar speaker cabinet is a robust and heavy-duty enclosure for two 12" speakers which is perfect for creating a custom cabinet with your own personal speaker preference. Featuring a particle housing and an MDF baffle construction, an open back, recessed handles, detachable grille clothe and all the required speaker connections such as connection plate, cable and screws, the Palmer 2 x 12 empty guitar speaker cabinet is perfect for guitarists hunting for their own unique cabinet tone.
På fjernlager
Unleash the true potential of your guitar amp with the new line of Palmer® guitar amp cabinets!
It is well known, that the guitar amp cabinet and its speaker play a significant role in the overall sound of your guitar. After many years of amp and cabinet building, we at Palmer® are well aware of this and have developed the second generation of our popular guitar amp cabinets.
This cabinet features the legendary Celestion® Vintage 30 speaker, which is known for its increased headroom, powerful mids and punchy sound. The open-back cabinet simultaneously creates a more present sound in the room and provides greater sound design options when recording in the studio, as the sound of cabinet can be picked up from both the front and the rear end. Plus, its removable front grille comes in handy for placing your mic even closer to the speaker, as well as allowing for quick speaker swaps.
The Palmer® 1 x 12 open back guitar speaker cabinet is made of a robust and durable housing that will withstand the heavy strains of touring.
So whether you're touring, recording in the studio or simply practicing at home, the Palmer® 1 x 12 open-back gives you the versatility you need to be true to your sound.
På fjernlager
Unleash the true potential of your guitar amp with the new line of Palmer® guitar amp cabinets!
It is well known, that the guitar amp cabinet and its speaker play a significant role in the overall sound of your guitar. After many years of amp and cabinet building, we at Palmer® are well aware of this and have developed the second generation of our popular guitar amp cabinets.
This cabinet model is equipped with two legendary Celestion® Vintage 30 speakers, which are known for their increased headroom, powerful mids and punchy sound. The cabinet features a closed back design allowing for a powerful and very direct sound dispersion. Plus, its removable front grille comes in handy for placing your mic even closer to the speaker, as well as allowing for quick speaker swaps.
The Palmer® 2 x 12 closed back guitar speaker cabinet is made of a robust and durable housing that will withstand the heavy strains of touring. So whether you're touring, recording in the studio or simply practicing at home, the Palmer® 2 x 12 closed-back gives you the versatility you need to be true to your sound.
På fjernlager
The Palmer 2 x 12 empty guitar speaker cabinet is a robust and heavy-duty enclosure for two 12" speakers which is perfect for creating a custom cabinet with your own personal speaker preference. Featuring a particle housing and an MDF baffle construction, an Closed Back, recessed handles, detachable grille clothe and all the required speaker connections such as connection plate, cable and screws, the Palmer 2 x 12 empty guitar speaker cabinet is perfect for guitarists hunting for their own unique cabinet tone.
På fjernlager
The Palmer 1 x 12 empty guitar speaker cabinet is a robust and heavy-duty enclosure for one 12" speaker which is perfect for creating a custom cabinet with your own personal speaker preference. Featuring a particle housing and an MDF baffle construction, an open back, detachable grille clothe and all the required speaker connections such as connection plate, cables and screws the Palmer 1 x 12 empty guitar speaker cabinet is perfect for guitarists hunting for their own unique cabinet tone.
På fjernlager
Providing extensive sound shaping options for acoustic guitars and basses, the Acoustic Pocket Amp is a versatile preamp that_s perfect for gigging, recording and practising. It accomodates both piezo and magnetic pickups, and the 3-band EQ with semi-parametric mid control is specifically tuned for acoustic instruments. The Pocket Preamp features an input limiter to prevent transient distortion while a 5-position rotary notch filter eliminates resonant frequency feedback. A mode switch selects between crisp contemporary or warm vintage sound characteristics, and a blend control allows you to mix the direct and processed signals.
The Acoustic Pocket Amp provides an insert for external effects, 3.5 mm stereo line input, headphones output and a footswitch-assignable thru jack to connect a tuner. Enabling DI applications, the balanced XLR output is pre or post signal processing switchable. The Acoustic Pocket Amp requires a 9 volt battery or power adapter and comes in a rugged diecast enclosure with heavy duty long-life footswitch, convenient LED status indicators and ground lift.
På fjernlager
In its new incarnation, the Palmer Pocket Amp MK 2 delivers an extended range of authentic tube amplifier tones from high headroom ultra clean to maxed out high gain distortion. With 3-position selector switches for amplifier design, gain structure and loudspeaker miking simulation the MK 2's hot rodded circuitry lets you easily configure vintage and modern sounds as well as your own while high performance op amps provide superior S/N ratio. For even more flexibility the Pocket Amp MK 2 sports master controls for drive and output level plus a 2-band EQ that has been carefully tailored for guitar applications.
Featuring a durable die cast aluminium enclosure with balanced XLR and unbalanced 6.35 mm outputs in addition to 3.5 mm AUX input and headphones jacks the Palmer Pocket Amp MK 2 is more than just the go-to tool for direct recording. It doubles as a practice amp, overdrive and distortion pedal, standard guitar DI box when bypassed and replaces your stage amp when used with a sound and monitor system. The Pocket Amp MK 2 works on a 9V battery or optional power adapter, e.g. Palmer PW9V.
På fjernlager
Providing extensive sound shaping options for active and passive bass guitars, the Pocket Bass Amp is a multi-purpose effects pedal and preamp that_s perfect for gigging, recording and practising. It features clean, overdrive and fuzz modes with adjustable drive and saturation, a 3-band EQ with semi-parametric mid control that is specifically tuned for bass guitar and vintage or modern cabinet simulation. A blend control allows you to mix the direct and effected signals.
The Pocket Bass Amp provides an insert for external effects, 3.5 mm stereo line input and headphones output for quiet play-along practice and a footswitch-assignable thru jack for silent tuning. Enabling DI applications, the balanced XLR output is pre or post effect switchable. The Pocket Bass Amp requires a 9 volt battery or power adapter and comes in a rugged diecast enclosure with heavy duty long-life footswitch, convenient LED status indicators and ground lift.
På fjernlager
Padded softcase for Palmer MI PEDALBAY® 80
På fjernlager
Padded softcase for Palmer MI PEDALBAY® 60 L
På fjernlager
Self-adhesive Hook and Loop Tape 50 mm in width - 1 m long. Ideal for mounting devices on pedal boards.
På fjernlager
Protective Cover for Palmer 1 x12" Cabinets
På fjernlager
Ready for immediate use and the perfect addition to any adapter case. The little helpers of the 4 Star series of our adapters are perfectly suited to react quickly in cases of missing connections. Perfectly suited as a space-saving connector for the pedalboard, for example. So you are well equipped for situations in which the right connection is needed
På fjernlager
Our new Adapter line products are now available for all those who like sturdy adapters and high-quality connections. Made from robust metal with gold-plated contacts, they are an important part of any adapters case. Our 4 STAR A JM2 JM2 S G BLU is the perfect helper for linking floor pedals f.e.
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.