
Speaker Stands, Black
SPS 023
Can be fixed secure in 5 steps (each step 17 cm) with included safety bolt
På fjernlager
.
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available.
Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate.
Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room.
Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
Ref: GSP3102TM
Product type | Stands and Tripods |
Type | Speaker Stands |
Tube material | Steel |
Tubing colour | Black |
Tubing surface | Powder-coated |
Min. height | 250 mm |
Max. height | 350 mm |
Tilt angle | +/- 15 ° |
Rotation | 360° |
Bearing surface | 250 x 250 mm |
Bearing surface | EVA padded |
Height adjustment | Adjusting screw |
Clamp base material | Steel |
Base edge length | 100 x 70 mm |
Clamping range up to | 100 mm |
Max load | 25 kg |
Interchangeable rings | 1 x 15 mm |
Interchangeable rings | 2 x 30 mm |
Black ring pack included | Yes |
Weight | 2,7 kg |
SPS 023
Can be fixed secure in 5 steps (each step 17 cm) with included safety bolt
På fjernlager
The hard conditions and extreme time pressures of touring are for strong workers and robust materials only - such as the Gravity Touring series speaker stand. Extremely sturdy, with three double-braced legs and a die-cast aluminium mounting bracket. Especially strong steel tubing for a 50 kg load capacity. Set-up and take-down are extremely quick and safe thanks to the automatic, snap-in LockPin®. The 35 mm extension pole is locked into place and the pin can only be unlocked with the release lever. The loudspeaker stand can be adjusted to a height of up to 194 cm. The locking screws, with solid, unlosable metal knobs, are an invaluable advantage when touring.
På fjernlager
CURV 500 STS
If the distance between the speaker base and the satellites on a CURV 500® array system needs to be increased for enhanced stereo experience, the CURV 500® STS is the optimal solution. This Stereo Set includes the CURV 500® DB distance bar, a round CURV 500® SSB speaker stand base with integrated extension, a SmartLink® adapter and a 8 metre speaker cable. The CURV 500® Entertainer Set can be operated with this set in the left and right channels with two satellites each. When purchasing a further four satellites, i.e. twice the CURV 500® S2 Set with two speakers each, you can even operate eight array satellites in stereo mode. This configuration with a subwoofer and 8 array satellites is particularly suitable for voice applications.
På fjernlager
CURV 500 SSB
The stable, round CURV 500® SSB speaker stand base made of powder-coated steel with integrated extension offers a strong support for the distance bar of the CURV 500® DB.
På fjernlager
DAVE 10 G4X DUAL STAND
The custom-fit set of distance pole and stand fork, in conjunction with the cluster mode of the DAVE G4X system, enables interference-free clustering of the DAVE 10 G4X satellites.
How does it work?
For this purpose, there is a special preset (Cluster Mode) with a special M/S distribution to reproduce the stereo signal without interference. This way, you also get more headroom and directivity.
The T-Stand allows two DAVE 10 G4X satellites to be mounted close together on to the subwoofer. The speaker pole is made of powder coated steel with an M20 bottom end thread. It features a steel collar with set screw and safety pin for secure height adjustment. With the simple height adjustment, the stand can be quickly and easily set to the desired height, offering a maximum height of 1.45 metres (excl. subwoofer). The base tube can be disassembled for a transport length of 58 cm only.
For larger events, the set can also be used to build a larger stereo setup by connecting two DAVE 10 G4X systems in cluster mode through a mixing console.
På fjernlager
LS 431 W
The GLS 431 W lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.
På fjernlager
The Gravity® studio monitor stand SP 3202 VARI®-TILT features a heavy, triangular base made of cast iron and a 250 x250 mm steel tray with isolating foam rests. It is tilt-adjustable by 10° and height-adjustable from 930 to 150 mm for optimum speaker positioning. The stand is supplied with a set of spikes. Mounted on the large, integrated rubber feet, these ensure effective coupling to the floor.
På fjernlager
SPS 16
Robust speaker stand for devices with a 16mm flange. A perfect accessory for many mobile LD Systems products.
På fjernlager
WB 431 B
This large heavy steel base for M20 poles provides a firm footing and three female threads that allow you to mount extra weights off centre. Two integrated handles facilitate transport while felt- covered feet prevent scratches and marks on the floor.
På fjernlager
SP 5211 B
The SP 5211 is a classic tripod speaker stand made of strong but lightweight aluminium tubing with black powder coating. It has a 50 kg load capacity and a maximum height of 195 cm.
The redesigned, extremely durable mounting of the support feet is made of aluminium pressure die-casting. The steel cuff of the height adjustment is virtually indestructible and ensures additional stability. A safety stud locks the 35 cm, strong extension tube.
The ergonomic buttons on the locking screws are made from highly-resistant ABS with a non-slip soft-touch coating made of thermo-plastic for convenient operation.
The SP 5211 is delivered with an additional set of black coding rings; additional rings are available in many different colours for distinct personalisation.
På lager
SP 3202
The Gravity GSP 3202 studio monitor stand has a heavy, triangular cast iron base. And the monitor tray is 250 mm x 250 mm in size with foam pads for damping. It is height-adjustable from 930 mm to 1500 mm for optimum speaker positioning and comes with a set of spikes. Mounted to the integrated large rubber feet, they achieve an effective coupling to the floor.
På lager
The Gravity GSP 4722 B is a heavy-duty speaker stand with a convenient hand crank and rack and pinion that make it easy to raise your speakers to the desired height. It is made of hard-wearing steel tubing with a folding tripod base and durable cast aluminium leg collar. A large knob set screw and safety pin secure the telescoping pole, which extends from 1.5 m to a maximum height of 2.4 m. The stand is TÜV/GS certified.
På fjernlager
SKDB 040
This 86 cm high loudspeaker stand is ideal for studio monitors and home speakers and is fitted with a triangular foot with an edge length of 44.5 cm. The foam-padded steel tray provides 28 x 28 cm standing space, which is sufficient for all standard monitor speakers.
The exceptionally sturdy design made with black powder-coated steel carries a maximum weight of 40 kg. Delivery also includes 4 cable clips for tidy cable organisation, as well as a set of steel spikes.
På fjernlager
MIX 6 G2 SET 2
This set consists of two robust speaker stands for the MIX 6 (A) G2 speakers, a 10 metre long speaker cable (Jack) and a high-quality, padded transport bag for both speaker stands.
The speaker cable is intended to connect the passive fullrange model MIX 6 G2 to the MIX 6 A G2 for slave use.
På fjernlager
DAVE 10 G4X STAND
The DAVE 10 G4X stand with star flange adapter is built to be extremely sturdy and made of powder-coated steel tubes.
The height adjustment with the easy-grip, triangular tightening sleeve is as easy as it is extremely fast. Another outstanding feature is the round base, which provides a stable and secure footing thanks to its weight and flat rubber feet. Thanks to VARIT®-WEIGHT compatibility, the base plate can be made heavier with additional weight plates.
På fjernlager
DAVE 8 SET 2
This set consists of two robust speaker stands for the DAVE 8 Roadie and DAVE 8 XS (W) (from serial number 130818000001) satellite speakers, two 5 metre long speaker cables (Speakon compatible) and a high-quality, padded transport bag for both speaker stands.
På lager
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available.
Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate.
Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room.
Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.