Cameo Animation Laser 200 mW RGY

1.649,00 kr.

Inkl. moms

WOOKIE 200 RGY

Sporting diode and DPSS lasers with 3 mm beam diameters and a maximum divergence of 1 mrad only the WOOKIE 200 RGY provides red, green and yellow colors and 200 mW output.

The Wookie Series animation laser lights provide vibrant, highly visible animations with precision beams, 32 lively pattern presets and high speed 5 Kpps stepper motors with a 60° scan angle. They are controllable via DMX in 3-channel and 9-channel modes, the integrated microphone with adjustable sensitivity and capable of master, slave and standalone operation. Each Wookie laser light sports a compact, high quality aluminium enclosure with 3-pin DMX connectors, IEC mains inlet and adjustable mounting bracket. A key switch prevents unauthorized use, and the bright display with four function keys allows easy manual operation. The Wookie Series laser lights come with a convenient infrared remote control.

Antal

På fjernlager

Ref: CLLWOOKIE200RGY

Beskrivelse
Produktoplysninger

Animation laser with high speed 5 Kpps stepper motor
60° scan angle
Precision beams with minimum divergence
32 pattern presets
DMX, sound and infrared control plus auto function
Master, slave and standalone modes
Display with 4 function keys for easy manual operation
Rugged aluminium enclosure with key switch
Includes handheld infrared remote

Product type	Laser
Total power	200 mW
Colour spectrum	RGY
Wavelength	532 nm
Wavelength	650 nm
Beam Data	approx. 3 mm / 1 mrad divergence
Laser sources	DPSS
Laser sources	Laser diode
Laser Class	3B
Scanner	High speed stepper motors, 5 kpps
Max. scan angle	60 °
Operating modes	Auto programs
Operating modes	DMX 512 protocol
Operating modes	sound control
DMX input	XLR 3-pin male
DMX output	XLR 3-pin female
DMX mode	3-channel
DMX mode	9-channel
Controls	Enter
Controls	Mode
Controls	Value Down
Controls	Value Up
Power supply	100 V AC - 240 V AC, 50 - 60 Hz
Power consumption	50 W
Power supply connector	IEC power connector male
Housing material	Metal
Cabinet colour	Black
Width	180 mm
Height	90 mm
Depth	192 mm
Weight	2 kg

Mærker Cameo

Reference CLLWOOKIE200RGY

Specifikke referencer

4 andre varer i den samme kategori:

På tilbud!
-300,00 kr.

Cameo Animation Laser 400...

WOOKIE 400 RGB

Projecting animations with red, green and blue color mixes the WOOKIE 400 RGB delivers an output of 400 mW from 3 mm beam diameter diode and DPSS lasers with no more than 2 mrad divergence.

2.349,00 kr. 2.649,00 kr.

På lager

Cameo Professional 700 mW...

LUKE 700 RGB

Projecting red, green and blue color mixes with 700 mW output power the LLUKE 700 RGB includes diode and DPSS lasers with 3 mm beam diameters and no more than 2 mrad divergence.

The Luke Series professional show lasers utilize an ingenious dual layer design to separate the optical components from the power supply and fan to vastly improve performance. They feature high speed 30 Kpps galvo scanners @ 8 degrees ILDA, a 60° scan angle and 128 pattern presets for exciting graphics projections with high visibility and pinpoint beams. The Luke laser lights include an ILDA interface on 25-pin D-sub connectors for computer control, 3-pin inputs and outputs for DMX control in 4-channel and 11-channel modes and a built-in microphone with adjustable sensitivity for sound control. In addition, they provide master, slave and standalone capability. The rugged high quality aluminium enclosure sports a key switch to prevent unauthorized use, a bright display with four function keys for manual operation and Neutrik powerCON mains connectors. A low noise fan keeps the compact units quiet and cool, and for audience safety the Luke Series laser lights are equipped with a _Scan Fail Safety_ system.

Note: Sharing identical presets, the Luke lasers are compatible with the Ioda series for master and slave operation. With switchable inversion, the master and slave combo is capable of producing the most interesting and impressive laser show effects.

6.959,00 kr.

På fjernlager

Cameo Professional Diode...

D FORCE 5000 RGB

Delivering a massive total output of 5,000 mW, the D.FORCE 5000 RGB creates stunning graphics projections with analogue modulation for up to 16 million colour shades. The highly professional diode-only show laser generates a razor-sharp beam with 2 mm diameter and less than 1 mrad divergence, and the use of a 638 nm diode ensures a highly visible, intense red colour. Eliminating the need for servicing, an easily accessible beam alignment system enables the user to quickly perform adjustments if necessary. The D.FORCE 5000 RGB's pure diode design provides an increased life span and much higher efficiency compared to temperature-dependent DPSS laser sources.

The D.FORCE 5000 RGB features a high-speed 30 Kpps scanner @ 8 degrees ILDA, a wide 50° scan angle and an ILDA interface on 25-pin D-sub connectors for software control.

The dust proof dual layer aluminium housing separates the optical components from the power supply and fan to ensure maximum performance while minimizing maintenance. It provides Neutrik powerCON input and output connectors plus a key switch to prevent unauthorized use. For audience safety the D.FORCE 5000 RGB is equipped with a Scan Fail Safety system, and an optional adapter permits the use of Pangolin lenses.

34.239,00 kr.

På fjernlager

Cameo Professional Full...

D FORCE 3000 RGB

The D.FORCE 3000 RGB has a high output of 3,000 mW, and with its pure red, green and blue LED construction, is superior to other DPSS lasers. The beam diameter is 4 x 2 mm with extremely low divergence of less than 1 mrad. The red 638 nm LED has considerably improved visibility over a conventional 650 nm LED, making the D.FORCE 3000 RGB the perfect choice for high-level professional laser shows. Analogue modulation enables the D.FORCE 3000 RGB professional show laser to generate up to 16 million colour shades and create eye-catching, razor-sharp graphics projections

The extremely robust dust-tight aluminium housing features two-layer construction. Optical components are separated from the power supply and the fan, ensuring consistent optimal performance and minimal service requirement. The D.FORCE 3000 RGB has a 30 kpps high-speed galvo @ 8° ILDA and a wide 50° scan area. It features an ILDA interface with 25-pin D-Sub connectors to facilitate control via various software, and a low-noise fan to maintain a low operating temperature. Power connection is via Neutrik PowerCON power input and output sockets, and a locking switch prevents unauthorised operation. The D.FORCE 3000 RGB is equipped with a scan fail safety system for the protection of the audience The easy-access beam alignment system is particularly well designed.

This system saves time and money because the D.FORCE 3000 RGB can easily be calibrated by the user. The D.FORCE 3000 has many application options due to its compatibility with effect and safety diffusers from the company Pangolin.

22.599,00 kr.

På fjernlager