. Palmer Standard 9 V Power Pack .
Palmer Standard 9 V Power Pack
search
  • Palmer Standard 9 V Power Pack

Palmer Standard 9 V Power Pack

159,00 kr.
Inkl. moms
PW 9 V

Power supply for all Palmer devices with a 9 V input connector and a maximum power consumption of 500 mA.

Antal
På fjernlager

Ref: PW9V

Product typePower Supplies
Mains connectorIEC connector
Input voltage100 - 240 V
Outputs1
Output connectors2.1 x 5.5 mm
Output voltage9 V
Max. output current500 mA A
PolarityCenter negative
Cord length150 cm
Width70 mm
Depth30 mm
Height70 mm
Weight0,092 kg
Palmer
PW9V

Specifikke referencer

16 andre varer i den samme kategori:

Palmer Professional 19" Battery Charger with 16 Varta AAA Batteries
search

Palmer Professional 19"...

BC400 AAA V1

Keep your microphones, in-ear monitors, effect pedals and other battery-powered devices operational at all times with the professional 19" Palmer BC 400 AAA V1 battery charger. It is controlled by a micro-controller and charges up to 16 AAA or AA batteries at the same time, including a combination of each. Charging stations for two 9-volt blocks are available as accessories, and can be combined as needed with the AA/AAA charging stations.

The Palmer 19" quick charger monitors the charging status of each individual battery, identifies defective batteries, and protects against overcharging and short-circuiting. The built-in multi-voltage power supply facilitates worldwide use. The Palmer BC 400 AAA V1 includes 16 rechargeable Varta AAA batteries.

Pris 4.259,00 kr.

På fjernlager

Palmer Professional 19" Rackmount Battery Charger
search

Palmer Professional 19"...

BC 400 AA

Keep your microphones, in-ear monitors, effect pedals and other battery-powered devices operational at all times with the professional 19" Palmer BC 400 AA battery charger. It is controlled by a micro-controller and charges up to 16 AA or AAA batteries at the same time, including a combination of each. Charging stations for two 9-volt blocks are available as accessories, and can be combined as needed with the AA/AAA charging stations.

The Palmer 19" quick charger monitors the charging status of each individual battery, identifies defective batteries, and protects against overcharging and short-circuiting. The built-in multi-voltage power supply facilitates worldwide use. The Palmer BC 400 AA does not include rechargeable batteries.

Pris 3.779,00 kr.

På fjernlager

LD Systems Power Supply for FX 300
search

LD Systems Power Supply for...

FX 300 PS

To make sure you always have the right and necessary power for your FX 300, we highly recommend its suitable power supply - FX 300 PS.

It runs center-negative at 9V DC / 500 mA and features a common 2.1 mm plug with negative tip and positive shaft.

Pris 169,00 kr.

På fjernlager

Palmer Professional 19" Battery Charger with 16 Varta AA Batteries
search

Palmer Professional 19"...

BC400 AA V1

Keep your microphones, in-ear monitors, effect pedals and other battery-powered devices operational at all times with the professional 19" Palmer BC 400 AA V1 battery charger. It is controlled by a micro-controller and charges up to 16 AA or AAA batteries at the same time, including a combination of each. Charging stations for two 9-volt blocks are available as accessories, and can be combined as needed with the AA/AAA charging stations.

The Palmer 19" quick charger monitors the charging status of each individual battery, identifies defective batteries, and protects against overcharging and short-circuiting. The built-in multi-voltage power supply facilitates worldwide use. The Palmer BC 400 AA V1 includes 16 rechargeable Varta AA batteries.

Pris 4.449,00 kr.

På fjernlager

Palmer Power Distribution Cable for up to 6 Devices
search

Palmer Power Distribution...

PWC 6

With the PWC6 you can power up to 6 units from one single power outlet. Considering that most common effects have a power consumption of approx. 20mA, a 300mA power supply such as the Palmer PW9V can thus often suffice to power 6 units.

Pris 69,00 kr.

På fjernlager

Palmer AA/AAA Battery Drawer for Palmer PBC chargers
search

Palmer AA/AAA Battery...

PBC DRAWER AA

Whether you're a stage professional or amateur, no power means no performance! That's why we've developed a charging tray for the Palmer PBC400 battery charger to ensure that your devices attached to AA / AAA battery never run out of power. Measuring just under 10 cm, this practical charging tray can be easily stored in any side pocket.

Pris 139,00 kr.

På fjernlager

Palmer Universal Pedalboard Power Supply with USB
search

Palmer Universal Pedalboard...

PWT 12 IEC

Leave the noise behind

A pedalboard can be a noisy place, and choosing the right power supply can make a big difference to the noise level and clarity of your guitar tone. That's where the PWT 12 IEC comes in. With 12 high current, individually isolated, ultra low noise outputs - each with its own dedicated regulator and custom isolated transformer - the PWT 12 IEC represents the next generation of Palmer® isolated pedal power supplies. Featuring two variable voltage outputs, the PWT 12 IEC lets you adjust the voltage between 6 and 18 volts, giving you even more headroom to run your overdrive pedals, as well as the "dying battery" sound that many guitarists love.In addition, the Palmer PWT 12 IEC has a USB C and USB A output with 18W so you can charge your mobile devices or even power your MIDI keyboards. We designed the PWT 12 IEC to address guitarists' main pain points when it comes to powering their precious effects pedals, so you can perform with complete peace of mind, knowing that your pedals and rig will sound as good as they can.

Pris 1.569,00 kr.

På fjernlager

Palmer Universal Pedalboard Power Supply 4-Outputs
search

Palmer Universal Pedalboard...

PWT 04

The PWT 04 is a universal pedalboard power supply with 1,000 mA output capacity and 4 standard centre negative 9 V DC single isolated outputs. Featuring short circuit and overload protection, the PWT 04 is fully regulated to deliver constant voltage. The unit sports a power on LED, and comes with a set of DC cables and dedicated mains adapter.

Pris 629,00 kr.

På fjernlager

Palmer Universal 8-Outlet Pedalboard Power Supply
search

Palmer Universal 8-Outlet...

PWT 08 MK2No unwanted noise, plenty of output for power-hungry pedals, and slim design

The PWT 08 MK2 power supply stands out with its slim design, which easily fits under almost any pedal boards. The total capacity of 2,000 mA is distributed over eight individually isolated 9V DC outputs.

Two of the outputs are adjustable between 6 and 18 volts to simulate the voltage drop of old batteries, or to feed effects pedals with higher voltage requirements. In addition, these two individually isolated outputs provide 500 mA each, making them ideal for digital effects pedals with high current requirements. The other six individually isolated outputs provide 300 mA each.

The PWT 08 MK2 power supply is regulated for a stable voltage supply, and is protected against short circuit and overvoltage issues. The PWT 08 MK2 pedalboard power supply is also equipped with a power LED on the input socket, and a two-colour LED on all outputs to indicate output status.

It comes with the appropriate US/UK/EU power adapter and a complete set of DC cables.

The PWT 08 MK2 is the ideal solution for a low-noise pedalboard that features power-hungry effects pedals.

Pris 1.099,00 kr.

På fjernlager

Palmer Power Supply with 8 Outputs for PEDALBAY® 60
search

Palmer Power Supply with 8...

WT PB 60

Attention stage-musicians: The Palmer Powerbar greatly reduces your gig set-up time thanks to the universal power supply which can be completely and discreetly integrated into the pedalboard. Simply replace the first crossbar with the power supply to experience the familiar high quality: Eight single isolated centre-negative outputs of which two are switchable outputs of 9, 12 or 18 volts for added flexibility. Optimum performance is provided by a total current of 2,000 mA. The best thing: no more forgotten power supplies or unnecessary cable clutter on-stage means no more stress.

Pris 1.679,00 kr.

På fjernlager

Palmer Power Supply with 8 Outputs for PEDALBAY® 40
search

Palmer Power Supply with 8...

WT PB 40

Attention stage-musicians: The Palmer Powerbar greatly reduces your gig set-up time thanks to the universal power supply which can be completely and discreetly integrated into the pedalboard. Simply replace the first crossbar with the power supply to experience the familiar high quality: Eight single isolated centre-negative outputs and two switchable outputs of 9, 12 or 18 volts for added flexibility. Optimum performance is provided by a total current of 2,000 mA. The best thing: no more forgotten power supplies or unnecessary cable clutter on-stage means no more stress.

Pris 1.559,00 kr.

På fjernlager

Palmer Universal 9V Pedalboard Power Supply 5 Outputs
search

Palmer Universal 9V...

PWT 05 MK 2

With a stable 250 mA on each of the five center negative barrel style outlets the compact Palmer PWT 05 MKII is most suited to virtually any pedalboard size. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are single isolated.

The PWT 05 MKII is protected against overloading and comes with 25 and 50 cm long connection cables, as well as two Y-cables. The first one, with a black connector, connects two 9 V outputs to increase the current intensity to a massive 500 mA, the other one, with a white connector, connects two 9 V outputs to double the voltage to 18 V. Also included is a 1-into-5 daisy chain that lets you power five pedals from one output if their total current draw does not exceed 250 mA. The rugged enclosure of the Palmer PWT 05 MKII provides mounting and cable relief options while the IEC mains inlet and voltage selector enable worldwide use.

Pris 939,00 kr.

På fjernlager

Palmer Universal Pedalboard Power Supply with USB
search

Palmer Universal Pedalboard...

PWT 06 IEC

Leave the noise behind!

A pedalboard can be a noisy place, and choosing the right power supply can make a big difference to the noise level and clarity of your guitar tone. And that's where the PWT 06 IEC comes in. With six high current, individually isolated, ultra low noise outputs - each with its own dedicated regulator and custom isolated transformer - the PWT 06 IEC represents the next generation of Palmer® isolated pedal power supplies. Featuring one variable voltage output, the PWT 06 IEC lets you adjust the voltage between 6 and 18 volts, giving you even more headroom to run your overdrive pedals, as well as the "dying battery" sound that many guitarists love. In addition, the Palmer PWT 06 IEC has a USB C and USB A output with 18W so you can charge your mobile devices or even power your MIDI keyboards. We designed the PWT 06 IEC to address guitarists' main pain points when it comes to powering their precious effects pedals, so you can perform with complete peace of mind, knowing that your pedals and rig will sound as good as they can.

Pris 1.179,00 kr.

På fjernlager

Palmer 9 V Battery Drawer for Palmer PBC Chargers
search

Palmer 9 V Battery Drawer...

PBC DRAWER 9V

Whether you're a stage professional or amateur, no power means no performance! That's why we've developed a charging tray for the Palmer PBC400 battery charger to ensure that your devices attached to a 9 V battery never run out of power. Measuring just under 10 cm, this practical charging tray can be easily stored in any side pocket.

Pris 149,00 kr.

På fjernlager

Palmer Universal 12-Outlet Pedalboard Power Supply
search

Palmer Universal 12-Outlet...

PWT 12 MK 2

The PWT 12 is a heavy duty (2000 mA) universal pedal board power supply with 12 single-isolated 9 V DC, centre-negative female pin-connector outputs. The variable outputs enable the simulation of voltage drop or 'battery sag' in old batteries. The power supply is regulated for constant voltage supply and protected against short circuit and overloading. The PWT 12 is equipped with a power LED and a two-colour LED output status indicator. It is supplied with an AC adapter and a set of DC cables. The PWT 12 is the ideal solution for power-hungry foot pedals or 9-volt effects units that can be operated at higher voltages for increased dynamics and stability.

Pris 1.409,00 kr.

På fjernlager

Palmer Professional 19" battery Charger with eight 9V block Batteries
search

Palmer Professional 19"...

BC400 9V V1

Keep your microphones, in-ear monitors, effect pedals and other battery-powered devices operational at all times with the professional 19" Palmer BC 400 9V V1 battery charger . It is controlled by a micro-controller and charges up to eight 9V block batteries at the same time. including a combination of each. Charging stations for two 9-volt blocks are available as accessories, and can be combined as needed with the AA/AAA charging stations.

The Palmer 19" quick charger monitors the charging status of each individual battery, identifies defective batteries, and protects against overcharging and short-circuiting. The built-in multi-voltage power supply facilitates worldwide use. The Palmer BC 400 9V V1 includes eight rechargeable Varta 9V block batteries

Pris 4.729,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.