LD Systems 2-Channel Effect Pedal with Carrying Bag and Power Supply

1.699,00 kr.

Inkl. moms

FX 300 SET

When you take the stage as a singer-songwriter or perform a living room concert, the quality of your sound plays a crucial role in how you are received by the audience. With the FX 300 SET from LD Systems (consisting of effects processor, transport bag and power supply), they will be convinced from the first tone you make - even if there was no time for a proper sound check. The practical little device is not only an effect pedal for your voice and instrument, but also a handy 2-channel mixer. Best of all, the mute functions can be controlled by pedals using your feet or hands. If you want to make an announcement, you can use the FX MUTE pedal to mute all effects so that your voice can be heard clearly without reverberation or delay. If you want neither your microphone signal nor that of your instrument to reach the outputs, simply tap MUTE ALL - extremely practical during breaks or at the end of your set.

The FX 300 offers 16 digital effect presets in 16-bit quality, 2 inputs with separate gain setting and two outputs: one balanced and one unbalanced. Thanks to the +48 V phantom power supply at the mic input, you can connect either a condenser or dynamic microphone. The high-impedance, low-noise instrument input produces impressive sound not only for acoustic guitar and bass, but with any instrument. Thanks to generous headroom, you no longer have to worry about distorted signals. And just in case no power outlet is nearby, the FX 300 can be operated with a 9-volt battery for up to five hours.

Antal

På fjernlager

Ref: LDFX300SET

Beskrivelse
Produktoplysninger

Effects processor with 16 digital effects presets in 16-bit quality
Water-repellent bag with 8 mm padding
Power supply unit with 9-volt DC at 500 mA

Product type	Power Supplies
Product type	Artist Pedal
Product type	Artist Pedal
Type	Set
Type	Home-Recording
Type	Live
Type	Soft carrying case with shoulder strap
Material	Nylon 1680D
Mains connector	IEC connector
Channels	2
Weight	0,89 kg

Microphone channels

Input voltage	100 - 240 V
Color	Black
Thickness of the padding	8 mm
Microphone channels	1
Mic inputs	XLR/6.3 mm jack
Height	90 mm
Width	180 mm
Output voltage	9 V
Depth	230 mm
Frequency Response Microphone Channel	50 - 20000 Hz
Amplification range Microphone channel XLR input	42 dB
Weight	0,18 kg
Max. output current	0.5 A
Mono Mic Input Input THD-N	<0,03%
Impedance XLR input	6000 Ohm(s)
Polarity	Center negative
Cord length	150 cm
Phantom power	+48V DC to XLR Input
Microphone channel Jack input Input type	Electronically balanced
Amplification range Microphone channel Jack input	20 dB
THD jack input	<0.045%
Width	35 mm
Depth	55 mm
Microphone Equalizer	+5/-8dB @ 8kHz
Microphone channel controls	FX SEND
Microphone channel controls	Gain
Microphone channel controls	tone
Height	60 mm
Weight	0,06 kg
Microphone Channels Display Elements	channel signal

Instrument channels

Instrument inputs	1
gain range	23 dB
THD	0.03%
Equalizer	+7/-8dB @ 10kHz
Channel Inserts	1
Controls	FX SEND
Controls	Gain
Controls	tone
Indicators	3-colour LED (SIG)
Indicators	channel signal

Main Section

Line outputs	2
Line output connectors	6.3 mm TRS
Line output connectors	XLR
Output level XLR	Max. +17dBu, balanced
Impedance XLR output	150 Ohm(s)
Output level Jack output	Max. +5dBV, unbalanced
Impedance jack output	40 Ohm(s)
Digital Effects Processor	Yes
Number of Presets	16
Main section controls	DFX Presets
Main section controls	FX MUTE
Main section controls	MIX OUT
Main section controls	MUTE ALL
Main section controls	Power
Display elements Main section	Effekt-Clip
Display elements Main section	FX MUTE
Display elements Main section	MUTE ALL
Display elements Main section	red LED (FX CLIP)

General Specifications

Operating voltage	9 V block
Operating voltage	External mains adapter 9 V DC / 250 mA (not included
Ambient temperature (in operation)	0 - 40° °C
Relative Humidity	< 80% (non-condensing)
Width	160 mm
Height	55 mm
Length	163 mm
Weight	0,65 kg
Features	Preparation for microphone stand mounting

Mærker LD Systems

Reference LDFX300SET

Specifikke referencer

4 andre varer i den samme kategori:

Palmer Portable Preamp for...

POCKET AMP ACOUSTIC

Providing extensive sound shaping options for acoustic guitars and basses, the Acoustic Pocket Amp is a versatile preamp that_s perfect for gigging, recording and practising. It accomodates both piezo and magnetic pickups, and the 3-band EQ with semi-parametric mid control is specifically tuned for acoustic instruments. The Pocket Preamp features an input limiter to prevent transient distortion while a 5-position rotary notch filter eliminates resonant frequency feedback. A mode switch selects between crisp contemporary or warm vintage sound characteristics, and a blend control allows you to mix the direct and processed signals.

The Acoustic Pocket Amp provides an insert for external effects, 3.5 mm stereo line input, headphones output and a footswitch-assignable thru jack to connect a tuner. Enabling DI applications, the balanced XLR output is pre or post signal processing switchable. The Acoustic Pocket Amp requires a 9 volt battery or power adapter and comes in a rugged diecast enclosure with heavy duty long-life footswitch, convenient LED status indicators and ground lift.

1.569,00 kr.

På fjernlager

LD Systems 2-Channel Pedal...

FX 300

For a singer-songwriter performing on stage or giving a concert in a living room, sound is everything.

LD Systems FX 300 will blow you away right from the moment you start your show, even if you've had little to no time to carry out a soundcheck. This small yet handy device not only serves as an effect pedal for altering the sound of your voice and instrument but is also an easy-to-use two-channel mixer. Its best feature by far are the pedals that let you control the mute functions with your feet or hand. And if you've got something to say, you can simply mute all effects with the FX MUTE pedal so your voice can be heard loud and clear without any reverb or delay and everyone in the room can understand your message. To prevent the signal of your microphone or instrument from reaching the outputs, all you need to do is tap the MUTE ALL pedal - a lifesaver during breaks or when wrapping up your set.

The FX 300 is outfitted with 16 digital effects presets in 16-bit quality, two inputs with a separate gain setting and a balanced and unbalanced output. The +48 V phantom power provided at the microphone input allows condenser microphones to be used in addition to dynamic microphones. The high-impedance, low-noise instrument input is not only great for acoustic or bass guitars but also for all other instruments. Plenty of headroom ensures you no longer have to worry about distorted signals. And with a 9 V battery that lasts up to five hours, LD Systems FX 300 has got you covered even if there's no outlet in sight.

1.459,00 kr.

På fjernlager

Palmer Portable Bass Preamp

POCKET AMP BASS

Providing extensive sound shaping options for active and passive bass guitars, the Pocket Bass Amp is a multi-purpose effects pedal and preamp that_s perfect for gigging, recording and practising. It features clean, overdrive and fuzz modes with adjustable drive and saturation, a 3-band EQ with semi-parametric mid control that is specifically tuned for bass guitar and vintage or modern cabinet simulation. A blend control allows you to mix the direct and effected signals.

The Pocket Bass Amp provides an insert for external effects, 3.5 mm stereo line input and headphones output for quiet play-along practice and a footswitch-assignable thru jack for silent tuning. Enabling DI applications, the balanced XLR output is pre or post effect switchable. The Pocket Bass Amp requires a 9 volt battery or power adapter and comes in a rugged diecast enclosure with heavy duty long-life footswitch, convenient LED status indicators and ground lift.

1.569,00 kr.

På fjernlager

Palmer Portable Guitar Preamp

POCKET AMP MK 2

In its new incarnation, the Palmer Pocket Amp MK 2 delivers an extended range of authentic tube amplifier tones from high headroom ultra clean to maxed out high gain distortion. With 3-position selector switches for amplifier design, gain structure and loudspeaker miking simulation the MK 2's hot rodded circuitry lets you easily configure vintage and modern sounds as well as your own while high performance op amps provide superior S/N ratio. For even more flexibility the Pocket Amp MK 2 sports master controls for drive and output level plus a 2-band EQ that has been carefully tailored for guitar applications.

Featuring a durable die cast aluminium enclosure with balanced XLR and unbalanced 6.35 mm outputs in addition to 3.5 mm AUX input and headphones jacks the Palmer Pocket Amp MK 2 is more than just the go-to tool for direct recording. It doubles as a practice amp, overdrive and distortion pedal, standard guitar DI box when bypassed and replaces your stage amp when used with a sound and monitor system. The Pocket Amp MK 2 works on a 9V battery or optional power adapter, e.g. Palmer PW9V.

1.179,00 kr.

På fjernlager