Insert Handle plastic black
Insert handle - in two parts
- Can be used to lift a box from all four directions
- With holes for water drain.
På fjernlager
.
Filtrer efter
Status
Selections
Mærker
Pris
9,00 kr. - 14.729,00 kr.
Der er 868 varer.
Aktive filtre
Insert handle - in two parts
På fjernlager
Strap Handle, black webbing covered with black rubber.
På fjernlager
Back Plate for 5720 Cargo Restraint Track
På fjernlager
Lashing point in black anodised aluminium. Specially designed for subsequent mounting on a speaker cabinet, for example. The flexibly mountable panel has a direct tensile load-bearing capacity of up to 500 daN.
På fjernlager
På fjernlager
Cargo Restraint Track
Fixings M6 x 40 countersunk
På fjernlager
Cargo Restraint Track
Fixings M6 x 40 countersunk
På fjernlager
Insulating wadding for loudspeaker boxes and sound absorption
På fjernlager
Mounting plate for 2 powerCON TRUE1 sockets
Cutout: 115 x 67 mm
På fjernlager
På fjernlager
Back-to-Back tape, one side hooks, other side loops.
På fjernlager
Back-to-Back tape, one side hooks, other side loops.
På fjernlager
Back-to-Back tape, one side hooks, other side loops.
På fjernlager
For extending network cables, you need an adapter or straight-through-coupling. As this adapter is of course also a component of the set-up, you should use a plug for Cat.6a connections that can also pass on this bandwidth.
We now offer the Cat.6a coupling from Neutrik® for this purpose. Very light, very small and compact. Perfect fit for any adapter case.
På fjernlager
etherCON RJ45 feedthrough coupler for cable extensions
På fjernlager
powerCON NAC3MPA-1 (power in) - powerCON NAC3MPB-1 (power out), coupler for linking cables
The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!
På fjernlager
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Hand tool for tightening the socket of the powerCON TRUE1 TOP, FXX and speakON FXX series.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
The G-shaped rubber sealing cap protects the powerCON TRUE1 TOP built-in connectors NAC3FPX* from dust and water in accordance with protection class IP65. User-friendly and easy to install, the compact frame enables a high packing density on the housing.
På fjernlager
The SCNAC-04 rubber sealing caps with two caps (power-in / power-out) protect the powerCON TRUE1 TOP built-in connectors NAC3PX-TOP against dust and water in accordance with protection class IP65. The compact frame is user-friendly, easy to install and enables a high packing density on the housing.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Colored coding rings with labeling block. Insert must not be unsoldered to change ring.
Box of 100 pcs.
På fjernlager
The D-shaped rubber sealing cap protects the powerCON TRUE1 TOP NAC3MPX* and powerCON 20A NAC3MPXXA* and NAC3MPA-* against dust and water in accordance with protection class IP 65. The compact frame is user-friendly, easy to install and enables a high packing density.
På fjernlager
Colored marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series) Easy handling as the insert does not have to be desoldered to change the ring.
Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Colored coding rings. Insert must not be unsoldered to change the color coding. Box of 100 pcs.
På fjernlager
Colored marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series) Easy handling as the insert does not have to be desoldered to change the ring.
Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Colored marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series) Easy handling as the insert does not have to be desoldered to change the ring.
Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Colored marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series) Easy handling as the insert does not have to be desoldered to change the ring.
Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series)
Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Phillips-head Screw with Nut for XLR Sockets
På fjernlager
The cable connector protection for pre-assembled RJ45 cable connectors consists of a black chrome-plated housing, stop washer, collet chuck, clamping sleeve and kink protection. It is supplied with two kink protection elements for cable diameters up to 5 mm or 8 mm. An RJ45 cable connector is not included in the scope of delivery.
The etherCON cable connector protection upgrades a conventional RJ45 connector to an extremely robust and lockable solution.
Attention! Not compatible with the CAT6 panel jacks NE8FDY-C6 and NE8FDY-C6-B.
På fjernlager
RJ45 cable connector carrier for preassembled RJ45 plugs consists of shell, fixing disk, chuck, bushing and boot. Packed with two cable protection elements for cable diameter either up to 5 mm or 8 mm. Cable connector carrier does not include a RJ45 plug.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
Attention! Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.
På fjernlager
Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.
På fjernlager
The set NE8MX6-B includes a cable plug carrier offering a robust metal shell, proven Neutrik chuck-type strain relief and a CAT6A RJ45 plug. The set is suitable for a cable diameter range of 7 mm to 9.5 mm and gauge of AWG26/1 - AWG22/1 (solid) or AWG27/7 - AWG22/7 (stranded).
Attention! Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.
På fjernlager
Phono socket in nickel D-shape housing, red isolation washers, solder version.
Features & BenefitsPå fjernlager
På fjernlager
Male phono/RCA connector in metal housing (D-form) with white coding and gold-plated contacts made by Rean (registered trademark of Neutrik AG)
På fjernlager
Male phono/RCA connector in metal housing with red coding and gold-plated contacts made by Rean (registered trademark of Neutrik AG)
På fjernlager
The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.
På fjernlager
The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.