Drawbolt medium...
Drawbolt medium, with key
Replacement key has the part number 1903KEY
På fjernlager
.
Filtrer efter
Status
Selections
Mærker
Pris
9,00 kr. - 34.239,00 kr.
Der er 1003 varer.
Aktive filtre
Drawbolt medium, with key
Replacement key has the part number 1903KEY
På fjernlager
Recessed lever latch for service door. Black plastic (POM). Mounts into wood thickness from 7-13 mm. Stainless steel screws.
På fjernlager
This sliding latch system was developed especially for small panels, doors or similar applications. In doing so, we emphasized minimising the installed height of the latch system in order to cover as many areas of application as possible.
På fjernlager
This sliding latch system was developed especially for small panels, doors or similar applications. In doing so, we emphasized minimising the installed height of the latch system in order to cover as many areas of application as possible.
På fjernlager
Galvanized screw with integrated gear rim and washer for easy mounting of substructure rollers.
På fjernlager
Galvanized screw with integrated gear rim and washer for easy mounting of substructure rollers.
På fjernlager
Thanks to its properties, embossed Cayman imitation leather is ideal for use as a covering material in loudspeaker construction. Cayman impresses with its fine appearance and appealing quality. Its fabric backing enables a firm and durable bonding.
På fjernlager
fixed castor in 2 mm steel frame
Distance of mounting holes: 60 x 80 mm
På fjernlager
372151Swivel Castor
På fjernlager
372191Swivel Castor
På fjernlager
Handle consisting of a black plastic dish and a sturdy ring handle made of black powder-coated die-cast zinc. By virtue of the two additional handholds, extremely ergonomic and especially suitable for carrying larger speakers in front of the body.
På fjernlager
På fjernlager
Recessed steel Bar Handle for top edge mounting.
På fjernlager
Insert handle - in two parts
På fjernlager
Strap Handle, black webbing covered with black rubber.
På fjernlager
Back Plate for 5720 Cargo Restraint Track
På fjernlager
Lashing point in black anodised aluminium. Specially designed for subsequent mounting on a speaker cabinet, for example. The flexibly mountable panel has a direct tensile load-bearing capacity of up to 500 daN.
På fjernlager
På fjernlager
Cargo Restraint Track
Fixings M6 x 40 countersunk
På fjernlager
Cargo Restraint Track
Fixings M6 x 40 countersunk
På fjernlager
Insulating wadding for loudspeaker boxes and sound absorption
På fjernlager
Mounting plate for 2 powerCON TRUE1 sockets
Cutout: 115 x 67 mm
På fjernlager
På fjernlager
Back-to-Back tape, one side hooks, other side loops.
På fjernlager
Back-to-Back tape, one side hooks, other side loops.
På fjernlager
Back-to-Back tape, one side hooks, other side loops.
På fjernlager
For extending network cables, you need an adapter or straight-through-coupling. As this adapter is of course also a component of the set-up, you should use a plug for Cat.6a connections that can also pass on this bandwidth.
We now offer the Cat.6a coupling from Neutrik® for this purpose. Very light, very small and compact. Perfect fit for any adapter case.
På fjernlager
etherCON RJ45 feedthrough coupler for cable extensions
På fjernlager
powerCON NAC3MPA-1 (power in) - powerCON NAC3MPB-1 (power out), coupler for linking cables
The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!
På fjernlager
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Hand tool for tightening the socket of the powerCON TRUE1 TOP, FXX and speakON FXX series.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
The G-shaped rubber sealing cap protects the powerCON TRUE1 TOP built-in connectors NAC3FPX* from dust and water in accordance with protection class IP65. User-friendly and easy to install, the compact frame enables a high packing density on the housing.
På fjernlager
The SCNAC-04 rubber sealing caps with two caps (power-in / power-out) protect the powerCON TRUE1 TOP built-in connectors NAC3PX-TOP against dust and water in accordance with protection class IP65. The compact frame is user-friendly, easy to install and enables a high packing density on the housing.
På fjernlager
Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.
På fjernlager
Vægt (Emb.) | 60g |
Rumfang (Emb.) | 0.00074025 |
Bredde (Emb.) | 94mm |
Længde (Emb.) | 225mm |
Højde (Emb.) | 35mm |
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.