LD Systems Speaker Stands...
SPS 16
Robust speaker stand for devices with a 16mm flange. A perfect accessory for many mobile LD Systems products.
På fjernlager
.
Filtrer efter
Status
Selections
Mærker
Pris
49,00 kr. - 3.909,00 kr.
Der er 91 varer.
Aktive filtre
SPS 16
Robust speaker stand for devices with a 16mm flange. A perfect accessory for many mobile LD Systems products.
På fjernlager
XS 400LD Systems XS400 Power Amplifier
The XS400 is an extremely compact, dependable Class D power amplifier with an output of 200W per channel at 4 ohms 400W in 8-ohm bridged mode, and a wide transmission range of 20Hz _ 20kHz. Our Class D power amplifier technology makes it possible to pack high performance into a minimum of space without generating unnecessary loss energy. The XS400, at 1U and a weight of 3.4kg, is conceived for all professional applications in which ease of transport or space is important, whether mobile or in permanent installations.
The XS400 has all protection circuits against short-circuiting, DC, overheating, and overloading and has a soft-start delay. The amplifier features XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as outputs. On the rear panel, it is possible to select the mode of operation and gain and activate the limiter and ground-lift function. LEDs on the front indicate power, signal, clipping, triggering of the protection circuit, and the mode of operation. The transparent sound of the XS400 stands out with high dynamics and impulse fidelity.
På fjernlager
XS 700LD Systems XS700 Power Amplifier
The XS700 is the flagship of the XS series of power amplifiers and an absolute flyweight with just 1U and 3.4kg. Our Class D power amplifier technology makes it possible to pack high performance into a minimum of space without generating unnecessary loss energy. The power amp has an output of 350W per channel at 4 ohms, 2x 200W at 8 ohms, and 700W in bridged mode. It is conceived for all professional applications in which ease of transport and space is essential, whether mobile or in permanent installations.
The XS700 has all protection circuits against short-circuiting, DC, overheating, and overloading and has a soft-start delay.
The amplifier features XLR, RCA and jack input connectors, with Speakon-compatible sockets and screw terminals as outputs. On the rear panel, it is possible to select the mode of operation and gain and activate the limiter and ground-lift function. LEDs on the front indicate power, signal, clipping, triggering of the protection circuit, and the mode of operation. The XS700 impresses with operational dependability and a transmission range of 20Hz _ 20kHz, which is reproduced transparently and dynamically with high impulse fidelity.
På fjernlager
CURV 500 SSB
The stable, round CURV 500® SSB speaker stand base made of powder-coated steel with integrated extension offers a strong support for the distance bar of the CURV 500® DB.
På fjernlager
DAVE 10 G4X STAND
The DAVE 10 G4X stand with star flange adapter is built to be extremely sturdy and made of powder-coated steel tubes.
The height adjustment with the easy-grip, triangular tightening sleeve is as easy as it is extremely fast. Another outstanding feature is the round base, which provides a stable and secure footing thanks to its weight and flat rubber feet. Thanks to VARIT®-WEIGHT compatibility, the base plate can be made heavier with additional weight plates.
På fjernlager
MAUI G2 SPS
With this set, MAUI 11 G2 and 28 G2 subwoofers and columns are easily and quickly mounted and taken apart. The heavy cast iron base with 50 cm steel tube attachment adjusts the column to the optimal height; it can also be screwed directly onto the base for use at home or in low-ceilinged rooms. The set includes a 5 m speaker cable and two adapters for the multipin connectors which are equipped with speaker and Euroblock sockets for connecting the column to the subwoofer. The MAUI base set is available with a black (LDMG2SPS) or a white (LDMG2SPSW) powder coating.
På fjernlager
CURV 500 STS
If the distance between the speaker base and the satellites on a CURV 500® array system needs to be increased for enhanced stereo experience, the CURV 500® STS is the optimal solution. This Stereo Set includes the CURV 500® DB distance bar, a round CURV 500® SSB speaker stand base with integrated extension, a SmartLink® adapter and a 8 metre speaker cable. The CURV 500® Entertainer Set can be operated with this set in the left and right channels with two satellites each. When purchasing a further four satellites, i.e. twice the CURV 500® S2 Set with two speakers each, you can even operate eight array satellites in stereo mode. This configuration with a subwoofer and 8 array satellites is particularly suitable for voice applications.
På fjernlager
MIX 6 G2 SET 2
This set consists of two robust speaker stands for the MIX 6 (A) G2 speakers, a 10 metre long speaker cable (Jack) and a high-quality, padded transport bag for both speaker stands.
The speaker cable is intended to connect the passive fullrange model MIX 6 G2 to the MIX 6 A G2 for slave use.
På fjernlager
87403 COMBILOCKOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Standard" range with combilock of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a combination lock for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87403 ALU COMBILOCKOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Standard" range with combilock of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a combination lock for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87404 COMBILOCKOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Standard" range with combilock of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a combination lock for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87406 COMBILOCKOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Standard" range with combilock of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a combination lock for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87402 COMBILOCKOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Standard" range with combilock of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a combination lock for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87402 ALU COMBILOCKOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Alu" range with combilock of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a combination lock for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87404 ALU ERGO
If you want to keep your rack tidy by storing accessories and cables conveniently and safely, ERGO has a sturdy rack drawer for tough everyday travel. The 1.5 mm aluminium rack drawer runs smoothly on ball bearing mounted telescopic rails and can be fully pulled out or completely removed.
The recessed handle lets you push and pull the drawer, and the drawer locks securely into place when closed.
På fjernlager
87404 ALUOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Alu" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87401 ALU ERGO
If you want to keep your rack tidy by storing accessories and cables conveniently and safely, ERGO has a sturdy rack drawer for tough everyday travel. The 1.5 mm aluminium rack drawer runs smoothly on ball bearing mounted telescopic rails and can be fully pulled out or completely removed.
The recessed handle lets you push and pull the drawer, and the drawer locks securely into place when closed.
På fjernlager
87403 ALU ERGO
If you want to keep your rack tidy by storing accessories and cables conveniently and safely, ERGO has a sturdy rack drawer for tough everyday travel. The 1.5 mm aluminium rack drawer runs smoothly on ball bearing mounted telescopic rails and can be fully pulled out or completely removed.
The recessed handle lets you push and pull the drawer, and the drawer locks securely into place when closed.
På fjernlager
87401 ECONOMYOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Economy" version of the standard 19" drawer from Adam Hall® with 2/3 extension, on ball bearing slide-in rails.
På fjernlager
87402 SHORTOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Standard" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87406 STANDARDOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Standard" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87403 ALUOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Alu" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87404 ALU COMBILOCKOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Standard" range with combilock of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a combination lock for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87401 ERGO
The ERGO is a very affordable rackmount drawer with heavy-duty 1.5 mm steel construction and easy, ergonomic operation. It integrates a recessed pull handle that runs the width of the drawer and a convenient push-to-close, pull-to-open latching mechanism with 1,5 kg pull force. This economy rack drawer has a black semi-gloss powder coating finish and 10 kg load capacity. It features smooth-running full extension ball bearing slides with front disconnect for easy drawer removal.
På fjernlager
87403 STANDARDOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Standard" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87404 STANDARDOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Standard" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87403 ECONOMYOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Economy" version of the standard 19" drawer from Adam Hall® with 2/3 extension, on ball bearing slide-in rails.
På fjernlager
87404 ERGO
The ERGO is a very affordable rackmount drawer with heavy-duty 1.5 mm steel construction and easy, ergonomic operation. It integrates a recessed pull handle that runs the width of the drawer and a convenient push-to-close, pull-to-open latching mechanism with 1,5 kg pull force. This economy rack drawer has a black semi-gloss powder coating finish and 20 kg load capacity. It features smooth-running full extension ball bearing slides with front disconnect for easy drawer removal.
På fjernlager
87402 ALUOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Alu" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87402 STANDARDOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Standard" range of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a lock with two keys for secure storage of the contents, a handle with latching function and is removable.
På fjernlager
87402 ERGO
The ERGO is a very affordable rackmount drawer with heavy-duty 1.5 mm steel construction and easy, ergonomic operation. It integrates a recessed pull handle that runs the width of the drawer and a convenient push-to-close, pull-to-open latching mechanism with 1,5 kg pull force. This economy rack drawer has a black semi-gloss powder coating finish and 20 kg load capacity. It features smooth-running full extension ball bearing slides with front disconnect for easy drawer removal.
På fjernlager
Vægt (Emb.) | 60g |
Rumfang (Emb.) | 0.00074025 |
Bredde (Emb.) | 94mm |
Længde (Emb.) | 225mm |
Højde (Emb.) | 35mm |
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.