. Køb Studio & Recording Equipment hos CC ProShop (2) .

Studio & Recording Equipment

NULL

Studio & Recording Equipment

Aktive filtre

  • Status: Disponibel
  • Mærker: Adam Hall Accessories
  • Mærker: Adam Hall Stands
  • Mærker: Gravity
  • Mærker: LD Systems
Gravity Keyboard Stand X-Form
search

Gravity Keyboard Stand...

KSX 1

The KSX 1 is a stable, solid keyboard stand with an X support and a 55 kg load capacity. The height can be comfortably adjusted up to 90 cm with the quick lock. The black powder-coated steel design boasts reinforced junctures for maximum durability and long-lasting, non-slip end caps.

Pris 379,00 kr.

På fjernlager

Gravity Set with keyboard stand X-Form double and rapid desk
  • På tilbud!
  • -90,00 kr.
search

Gravity Set with keyboard...

KSX 2 RD

Especially on tour it is important that all instruments, equipment and accessories are compactly packed and can be easily stowed away in the bus. That's why the Gravity Rapid Desk Set combines the stable Gravity KSX2 keyboard stand with a double X-form and the Gravity Rapid Desk 1. That makes it easy for you to put up a sturdy table in a few simple steps and also to take it down into two separated flat pieces. Plus, this combination works in pretty much every situation, no matter if you're playing in the studio or practicing in the rehearsal room.

Measuring 100 cm wide and 48 cm deep, its large table surface provides you with plenty of room to arrange your laptop, DJ mixer, controller or even a small rack synthesizer just the way you like. The stand and tabletop can hold up to 60 kg in weight, whereas the vents in the powder-coated steel support plate ensure your equipment is kept perfectly cool.

In terms of set-up, all you have to do is slide the upper bars of the keyboard stand into the slots located on the bottom middle of the support plate and then open the X-stand. There's absolutely no need to fasten or screw tight the support plate.

Pris 769,00 kr. Normalpris 859,00 kr.

På fjernlager

Gravity Height Adjustable Stool with Footrest
search

Gravity Height Adjustable...

FM SEAT 1

Long rehearsals or gigs usually mean hours of standing for musicians - whether on the microphone, guitar or other instruments. A flexible, comfortable standing aid ensures increased comfort, preventing early fatigue and relieving back strain.

The standing aid FM Seat 1 by Gravity is suitable for universal use on stage, in the rehearsal room or at home while practising; for guitarists, bass players, pianists, string players, wind players and singers. It boasts several of Gravity's special hallmark features.

Let's take a look at the seat first: It has an attractive leatherette covering and can be tilted forwards or backwards at continuously variable angles.

Let's move onto the adjustment options offered by this standing aid: The frame is made of solid steel and with a generous height adjustment range of 67 cm to 97 cm, a comfortable seating position can be achieved for any body height. The continuously height-adjustable footrest additionally reliefs the back while also allowing one or both legs to be rested.

Another extremely practical aspect is the integrated levelling foot. The tubular base construction is fitted with our KS Vari-Foot® 1. This ensures a stable and secure footing even on uneven surfaces by means of a simple screw mechanism.

The FM Seat®1 is quick to assemble by means of a folding mechanism and can be folded flat for transport - so it fits into any narrow gap when loading.

And for those who are looking for even greater comfort, a practical Gravity GFMBR1 backrest is optionally available that likewise features continuously variable height adjustment.

In short, our FM SEAT 1 is the ideal standing aid for a wide range of applications!

Pris 1.299,00 kr.

På fjernlager

Gravity Tilting Tier for GKSX Keyboard Stands
search

Gravity Tilting Tier for...

KSX 2 T

Tilting tier for Gravity X-type keyboard stands. Upgrade your keyboard stand by attaching a second tier for an additional keyboard. The universal and easy to use mounting and adjustment options require no tools whatsoever. The tilting angle of the tier is adjustable in fine incremental steps _ markings on both arms help in finding the right angle. The tier is compatible with tubes measuring an inner diameter of at least 20 mm.

Pris 379,00 kr.

På fjernlager

Gravity Height-Adjustable Folding Keyboard Bench
search

Gravity Height-Adjustable...

FK SEAT 1

Piano and keyboard players often have to sit for hours on end during long rehearsals, gigs or recording sessions. Having a flexible and comfortable keyboard bench enhances comfort, improves posture and prevents you from getting tired too quickly.

Gravity's FK SEAT 1 keyboard bench, which can be used for a variety of different applications on the stage, in the rehearsal studio or while practicing and composing at home, is for keyboard players, guitarists, bass players, and musicians of string and wind instruments.

It boasts several of Gravity's special hallmark features.

On the one hand, the seat has a range of functions: it is covered with a mix of leatherette and fabric to ensure the seat surface can breathe in all the right places. This provides an elevated level of comfort. The FK SEAT 1's unmistakable and appealing design is also made possible by this combo of materials.

On the other hand, it is worth noting that the bench's height can be adjusted to provide the optimal sitting position for every body size and every type of instrument. The necessary stability is provided by the solid steel frame.

The integrated leveler is another very useful element, and the tubular base construction is outfitted with our KS VARI®-Foot 1. The simple screw-lock mechanism lets the bench stay firmly and securely fixed in place, even on bumpy surfaces. The FK Seat's 1 hinge mechanism allows the bench to be quickly set up, taken down and folded flat for transport. It can thus fit into virtually any space during loading. In short, our FK SEAT 1 is the ideal keyboard bench for a wide range of applications!

Pris 1.029,00 kr.

På fjernlager

Folding Keyboard Bench With Extra Thick Padding
search

Folding Keyboard Bench With...

SKT 17

The SKT 17 is an ultra comfortable single X brace keyboard bench with a 52 x 24 cm high density foam padded seating area and adjustable height from 36 to 52 cm. The durable construction is made of black powder coated heavy duty steel. The legs feature non-slip rubber ends and fold completely flat for easy transport and space saving storage.

Pris 439,00 kr.

På fjernlager

Gravity Musician Seat with Guitar Stand
search

Gravity Musician Seat with...

FG SEAT 1

Compactness is the key word here because who isn't familiar with forgetting their guitar stand in a hurry on the way to the gig, the stool at the concert venue not being comfortable and the guitar slipping off your leg because the stool is too high. For this there is now the Gravity® FG SEAT 1 musician seat. A clever stool with integrated stand and adjustable footrest for a bar-like feeling on every stage and at home.

The guitar bar stool is a round musician seat designed for guitarists, bassists and singer-songwriters. It boasts several of Gravity's special hallmark features. Firstly, there is the design and functionality of the seat: It is made from a combination of leatherette and fabric. This ensures that the seat surface is breathable at the right places, which significantly increases sitting comfort. This combination also gives the stool a unique and appealing design.

A second highlight is the sophisticated stable body mount for your guitar. This can be folded down and can securely hold any conventional guitar, whether acoustic or electric. Further up, the neck of the guitar is held by a pull-out arm, which can be locked to protect your instrument from any falls. At the touch of a button, the arm can be elegantly retracted under the seat when not in use. For transport, the FG SEAT 1 fits into any narrow space as it can be folded flat.

A third very practical aspect is the particularly stable and height-adjustable footrest. This can be easily pulled up with your foot and enables you to quickly find the optimal leg angle. This way, you always keep your guitar in a perfect position.

In short, the FG SEAT 1 is a compact 3-in-1 solution for you and your guitar!

*Not suitable for long-term use with guitars that have a nitro lacquer finish.

Pris 989,00 kr.

På fjernlager

Gravity Height Adjustable Stool with Foot and Backrest
search

Gravity Height Adjustable...

FM SEAT1 BR

Long rehearsals or gigs usually mean hours of standing for musicians - whether on the microphone, guitar or other instruments. A flexible, comfortable standing aid ensures increased comfort, preventing early fatigue and relieving back strain.

The standing aid FM SEAT 1 BR by Gravity is suitable for universal use on stage, in the rehearsal room or at home while practising; for guitarists, bass players, pianists, string players, wind players and singers. It boasts several of Gravity's special hallmark features.

Let's take a look at the seat first: It has an attractive leatherette covering and can be tilted forwards or backwards at continuously variable angles.

Let's move onto the adjustment options offered by this standing aid: The frame is made of solid steel and with a generous height adjustment range of 67 cm to 97 cm, a comfortable seating position can be achieved for any body height. Even more comfort is provided by the FM BR 1 backrest. It is also covered in pleasant leatherette and can be flexibly adjusted in height and distance to the seat, allowing you to find your perfect sitting posture.

The continuously height-adjustable footrest additionally reliefs the back while also allowing one or both legs to be rested. Another extremely practical aspect is the integrated levelling foot. The tubular base construction is fitted with our KS Vari-Foot® 1. This ensures a stable and secure footing even on uneven surfaces by means of a simple screw mechanism.

The FM SEAT 1 BR is quick to assemble by means of a folding mechanism and can be folded flat for transport - so it fits into any narrow gap when loading.

In short, our FM SEAT 1 BR is the ideal standing aid for a wide range of applications!
Pris 1.989,00 kr.

På fjernlager

Gravity Round Musicians Stool
search

Gravity Round Musicians...

FD SEAT 1

For musicians, long rehearsals or recording sessions usually mean sitting for hours on end. Whether playing the drums or other instruments. A flexible and comfortable seat provides more endurance and a better atmosphere for everyone.

The FD SEAT 1 from Gravity is a round musician's chair for universal use: In the studio, on stage, in the rehearsal room or at home practicing. For drummers, guitarists, bassists, pianists, strings or wind instruments. It boasts special characteristics typical of Gravity. On the one hand, the functionality of the seat: In contrast to most current models from other manufacturers, it is not only made of leather/ imitation leather or fabric, but of a mix of materials. This ensures that the seat surface is breathable at the right places, significantly increasing comfort. In addition, this mix gives the FD SEAT 1 an unmistakable and appealing design that sets it apart from the crowd.

A second highlight is the ingenious height adjustment: It is based on a threaded rod, but with a certain twist. For fine adjustment, simply loosen the locking screw and turn the seat in the appropriate direction. For larger height adjustments, however, the seat surface can simply be pulled up or down and then tightened with the knurled nut. This saves time and nerves! And thirdly, the Gravity chair has a particularly sturdy leg construction made entirely of metal. The legs are double-braced and the feet are large enough to ensure stability and reliability.

Pris 879,00 kr.

På fjernlager

Gravity Studio Monitor Speaker Stand
  • På tilbud!
  • -60,00 kr.
search

Gravity Studio Monitor...

SP 3102

A mix's sound and feel is heavily influenced by having your monitors placed in the proper position. In a home studio, however, where space is at a premium, it's not always possible to put your studio monitors right next to a table using suitable stands. The Gravity SP 3102 is the solution to this problem. The flexible, powder-coated steel stand squeezes onto pretty much any desk. The edge of the solid base is only 25 cm in length. Monitor boxes weighing up to 25 kg can be flexibly positioned at the height you want, and EVA padding and tilting protection make it possible to vertically angle them by up to 15° and horizontally rotate them 360°, meaning you can always find the perfect position for your studio monitors. The colourful G-rings make a clear design statement and can be swapped out in mere seconds. An additional black ring set is also supplied with the product.

Pris 529,00 kr. Normalpris 589,00 kr.

På fjernlager

Gravity 2-Point Adjustment Boom Arm
search

Gravity 2-Point Adjustment...

MS B 21

This 80 cm boom arm features a cast aluminium hub with precision 2-point tilt and position adjustment and 3/8" male thread. The ergonomic set screw knobs are made from high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation.

Pris 199,00 kr.

På fjernlager

Tripod Microphone Stand with Boom Arm and Locking Leg
  • På tilbud!
  • -30,00 kr.
search

Tripod Microphone Stand...

S 10 B

This microphone boom stand is made of hardwearing steel tubing with black powder coating finish. It features a durable tripod base with locking leg that eliminates the need for a set screw. Folding the locking leg halfway allows you to slide the leg collar up and down the shaft, folding it to the upper or lower stop locks the collar in place for quick setup or compact transport.

Pris 249,00 kr. Normalpris 279,00 kr.

På fjernlager

Gravity 2-Point Adjustment Telescoping Boom Arm
search

Gravity 2-Point Adjustment...

MS B 22

This telescoping boom arm features a cast aluminium hub with precision 2-point tilt and position adjustment and 3/8" male thread.

The ergonomic set screw knobs are made from high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation.

A convenient quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement.

Pris 239,00 kr.

På fjernlager

Microphone Stand with Boom Arm
  • På tilbud!
  • -30,00 kr.
search

Microphone Stand with Boom...

S 9 B

Small microstand black for guitar, amp, drum, brass a.s.o.

Pris 229,00 kr. Normalpris 259,00 kr.

På fjernlager

Table Microphone Arm with Built-In XLR Cable
  • På tilbud!
  • -40,00 kr.
search

Table Microphone Arm with...

S TBA 01

No matter if you're a podcaster, content creator, or home producer looking to equip your creative workspace with a microphone arm and keep your cables tidy and out of the way, the Adam Hall Stands S TBA 01 is just what you need.

The freely movable and robust microphone arm can be easily attached to any tabletop using the supplied table clamp.

Cables won't get tangled up thanks to the 3 m XLR microphone cable that's integrated inside the arm.

The Adam Hall Stands S TBA 01 microphone arm is perfect for your home studio or multimedia workstation.

Pris 279,00 kr. Normalpris 319,00 kr.

På fjernlager

Tabletop Microphone Stand
  • På tilbud!
  • -20,00 kr.
search

Tabletop Microphone Stand

S 8 BB

Stable microphone stand with base plate made of cast steel. The round base is equipped with rubber feet for soundproofing. The tripod tube can be unscrewed and has a 3/8" thread.

Pris 139,00 kr. Normalpris 159,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base
search

Gravity Microphone Stand...

MS 23 W

The MS 23 is a premium-quality microphone stand with thick walled tubing, white powder-coated finish and 160 cm maximum height. The exceptionally stable round base, made of cast iron, is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

For smooth, durable height adjustment, the MS 23_s handle is made of high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

VARIWEIGHT® compatible _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

An additional set of black coding rings is included with the MS 23; more ring packs are available in a wide array of colours for instant personalization.

Pris 439,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod Base and 2-Point Adjustment Telescoping Boom
search

Gravity Microphone Stand...

MS 4322 W

The MS 4322 is a premium microphone stand which features heavy-duty construction, powder coating and a maximum height of 169 cm. The extremely stable base features a zinc die-cast bell and generously proportioned, precision-folding steel legs with durable rubber caps to protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick-release adjuster enables variable extension to a maximum length of 88 cm, facilitating flexible microphone placement. The smooth yet robust height adjustment grip and screw knobs of the MS 4322 are made from highly durable ABS with a non-slip, soft-touch thermoplastic coating for comfortable use. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

An additional set of black coding rings is included with the MS 4322; more ring packs are available in a wide array of colours for instant personalisation.

Pris 519,00 kr.

På fjernlager

Gravity Short Microphone Stand with Folding Tripod Base and 2-Point Adjustment Boom
search

Gravity Short Microphone...

MS 4221 B

The MS 4221 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the 50 cm boom arm. For easy height adjustment the MS 4221 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4221 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 449,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base and 2-Point Adjustment Boom
search

Gravity Microphone Stand...

MS 2321 B

The MS 2321 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 168 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features convenient 1-point tilt and position adjustment of the 79 cm boom arm. For easy height adjustment the MS 2321 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 2321 B, additional ring packs are available in a wide array of colours for instant personalization.

Pris 529,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod Base
search

Gravity Microphone Stand...

MS 43

The MS 43 is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

For easy height adjustment the MS 43 sports a smooth, durable clutch with an ergonomic threaded handle made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 43, additional ring packs are available in a wide array of colours for instant personalization.

Pris 379,00 kr.

På fjernlager

Gravity Short Microphone Stand with Round Base and 2-Point Adjustment Telescoping Boom
search

Gravity Short Microphone...

MS 2222 B

The MS 2222 B is a premium-quality microphone stand with thick walled tubing, black powder-coated finish and 73 cm maximum height. The exceptionally stable round base, made of cast iron, is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The position and angle of the boom is precisely adjusted with 2 tensioning knobs on the bracket. A quick fastener allows for variable extension to a maximum length of 88 cm, facilitating flexible mic placement. For smooth, durable height adjustment, the MS 4222 B_s handle and knobs are made of high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

An additional set of black coding rings is included with the MS 2222 B; more ring packs are available in a wide array of colours for instant personalization.

VARIWEIGHT® compatible _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

Pris 519,00 kr.

På fjernlager

Microphone Stand with Boom Arm
  • På tilbud!
  • -30,00 kr.
search

Microphone Stand with Boom Arm

S 6 B

Microphone stand black

  • telescopic boom arm
  • plastic-covered metal base with folding legs
Pris 309,00 kr. Normalpris 339,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod and One-Hand Clutch
search

Gravity Microphone Stand...

MS 431 HB

The GMS 431 HB is a premium quality microphone stand with thick walled tubing, powder coated finish and 179 cm maximum height. The heavy duty tripod base is made of die-cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

The GMS 431 HB sports a slim, innovative clutch for convenient one-handed height adjustment. The ergonomic design and soft touch surface of the clutch handle provide a secure grip in all situations. The custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the GMS 431 HB, additional ring packs are available in a wide array of colors for instant personalization.

Pris 469,00 kr.

På fjernlager

Gravity Cab Clamp Microphone Holder for Guitar Cabinets
search

Gravity Cab Clamp...

MS CAB CL 01

This universal clamping system allows you to mic up a guitar cabinet in an easy and revolutionary way. The spring-loaded clamping arm makes the clamp suitable for almost any type of cabinet and securely fastens to the side or top of a cabinet or combo amplifier. Thanks to its adjustable edge grip, the clamp can be adjusted to fit snugly onto recessed edges. The rigid boom is finely adjustable in both boom angle and microphone depth _ this ensures a far more precise and secure mic placement as opposed to using a gooseneck-based clamping system or conventional mic stand.

Pris 409,00 kr.

På fjernlager

Gravity Table-Top Microphone Stand
search

Gravity Table-Top...

MS T 01 B

This table top microphone stand consists of a heavy yet compact die-cast base and a steel tube. Thick rubber covering the whole circumference of the base isolates it from the table and helps to minimise unwanted noise.

Pris 229,00 kr.

På fjernlager

Gravity Cab Clamp - Mic Holder for Guitar Cabs
search

Gravity Cab Clamp - Mic...

MS CAB CL 01 S

This universal clamping system allows you to mic up a guitar cabinet in an easy and revolutionary way. The spring-loaded clamping arm makes the clamp suitable for almost any type of cabinet and securely fastens to the side or top of a cabinet or combo amplifier. Thanks to its adjustable edge grip, the clamp can be adjusted to fit snugly onto recessed edges. The rigid boom is finely adjustable in both boom angle and microphone depth _ this ensures a far more precise and secure mic placement as opposed to using a gooseneck-based clamping system or conventional mic stand.

Pris 409,00 kr.

På fjernlager

Gravity Traveler Microphonestand
search

Gravity Traveler...

MS 5311 BThe Traveler Series' Microphone Stand

Every bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed.

The Gravity® MS 5311 B microphone stand can be taken everywhere you go. It's so light, there's absolutely no need for you to worry about weight or availability.

Despite its light weight, the stand is still sturdy and strong. Its robust leg construction withstands heavy loads and gives the stand a solid foundation. The position and tilt of the boom can be adjusted quickly and easily at the joint with only one clamping screw. The handle, used for smoothly and securely adjusting the stand's height, and the clamping screw are made of exceptionally durable ABS plastic and covered with a non-slip soft-touch thermoplastic coating for comfortable operation.

Gravity® has once again delivered a useful and reliable product for you to round off your collection of stands.
Pris 239,00 kr.

På fjernlager

Gravity Short Heavy Duty Microphone Stand with Folding Tripod Base
search

Gravity Short Heavy Duty...

MS 3122 HDB

Ideal for bass drum micing, the GMS 3122 HDB is a premium quality microphone stand with thick walled tubing, powder coated finish and 32 cm height. The tripod base is made of die cast zinc while the legs are made of strong and heavy folding steel. Hefty rubber cabs for surface protection complete the picture of the stand.

The boom hub features precision 2-point tilt and position adjustment of the telescoping arm. A quick fastener allows for easily variable extension to a maximum length of 88 cm, and the custom designed retainer requires no tools for quick and secure mic clip attachment.

A set of black coding rings is included with the GMX 3122 HDB, additional ring packs are available in a wide array of colors for instant personalization.

Pris 489,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base and One-Hand Clutch
search

Gravity Microphone Stand...

MS 231 HB

The GMS 231 HB is a premium-quality microphone stand with thick walled tubing, black powder-coated finish and 175 cm maximum height. The exceptionally stable round base is made of heavy-duty cast iron, while a rubber ring on the bottom ensures acoustic isolation and surface protection.

The GMS 231 HB features a new and especially convenient single-handed height adjustment function fitted with a non-slip ergonomic handle that makes it very easy to use at all times. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

VARIWEIGHT® compatible _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

An additional set of black coding rings is included with the GMS 231 HB; more ring packs are available in a wide array of colours for clear personalization. For increased stability, a 2.3 kg weight disc is available as an accessory (article no. GWS2WP) that is easy to assemble without tools.

Pris 519,00 kr.

På fjernlager

Gravity Short Microphone Stand with Folding Tripod Base and 2-Point Adjustment Telescoping Boom
search

Gravity Short Microphone...

MS 4222 B

The MS 4222 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The folding tripod base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4222 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4222 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 469,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base and 2-Point Adjustment Telescoping Boom
search

Gravity Microphone Stand...

MS 2322 B

The MS 2322 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 168 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 2322 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 2322 B, additional ring packs are available in a wide array of colours for instant personalization.

Pris 559,00 kr.

På fjernlager

Gravity Microphone Stand with XLR Connector and Gooseneck
  • På tilbud!
  • -90,00 kr.
search

Gravity Microphone Stand...

MS 23 XLR B

Enabling ultra flexible microphone orientation, this premium quality stand features a 36.5 cm gooseneck on a thick walled 114.5 cm tube and a heavy duty round base made of cast iron.

The gooseneck integrates a 3-pin female XLR connector for directly attaching a microphone while the tube sports a lateral XLR mic cable connector at the bottom end. This permits quick, clean setup without mic clips and running the cable up the stand.

To extend the stand's height and increase stability, additional XLR goosenecks and a weight disc are available as accessories.

Pris 699,00 kr. Normalpris 789,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod Base and 2-Point Adjustment Boom
search

Gravity Microphone Stand...

MS 4321 B

The MS 4321 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

The boom hub features precision 2-point tilt and position adjustment of the 79 cm boom arm. For easy height adjustment the MS 4321 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4321 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 489,00 kr.

På fjernlager

LD Systems Professional In-Ear Headphones black
search

LD Systems Professional...

IEHP 1

The LDIEHP1 is an extremely light, professional in-ear monitor with a broad frequency response range and a clean, balanced sound. It is very well shielded against extraneous noise and comes with three different sets of tips to fit practically any pair of ears perfectly. Additional convenience is ensured by a generously long, 1.5m-long cable. A gold-plated mini-TRS plug provides for a reliable connection.

Pris 399,00 kr.

På fjernlager

LD Systems 19" Headphone Amplifier 6-Channel
search

LD Systems 19" Headphone...

HPA 6LDHPA6 6-Channel Rackmount Headphone Amplifier

The LD Systems HPA 6 is a highly flexible 1U 19_ rack format headphone amplifier with 6 fully independent channels and comprehensive features for a wide range of professional audio monitoring applications.

Each channel provides a 6.3 mm TRS headphone output on the front panel with level control, mono/stereo switching, discrete left/right muting and a 6.3 mm TRS Aux input with Main/Aux balance control for mixing in further signal sources. Four-segment LED meters permit visual output level monitoring, and two 6.3 mm TRS outputs per channel on the rear allow for connecting a total of 18 headphones.

The HPA 6's main section features a master level control with eight-segment LED metering and 6.3 mm TRS input to mix in an additional source with all channels. The rear panel provides the main stereo inputs on balanced XLR and 6.3 mm TRS connectors and stereo outputs for daisy chaining multiple units.

Pris 1.859,00 kr.

På fjernlager

LD Systems Amplifier for headphones and wired IEM
search

LD Systems Amplifier for...

HPA 1

The LD Systems HPA 1 is a versatile headphone amplifier with high power output for stage, studio and home recording and is the perfect solution for wired in-ear-monitoring.. The compact device in a rugged, ergonomically shaped plastic housing with soft-touch surface and practical belt clip is very extensively equipped.

In addition to locking XLR connectors for the stereo signal L/R input, the HPA 1 has a balanced 3.5 mm stereo jack as AUX input, which can be used in parallel for clicks or playback. It is protected for safe operation against excessive input levels; a hollow pin socket with negative internal contact enables the connection of a network adapter for fixed operation.

A 3.5 mm stereo jack is provided as earphone and headphone output. Volume level and balance can be set with easy-grip knobs, a push-button switches between the summed mono and stereo signals. A full-fledged limiter is integrated for distortion-free playback and as protection against feedback.

The LD Systems HPA 1 has bi-colour LEDs to facilitate the features overview, which displays the response of the limiter during peaks and the battery status. At 165 grams, the headphone amplifier is distinctly light-weight and can be operated for up to 12 hours thanks to a high quality 9 V block battery.

Pris 939,00 kr.

På fjernlager

LD Systems Carry case for in-ear headphones
search

LD Systems Carry case for...

IE POCKET

This durable, lightweight carry case is designed for storing and transporting your in-ear headphones. The rigid outer shell with soft fleece lining provides solid protection from impact, scratches and dust. The case features an internal mesh pocket for ear tips and other accessories, a sturdy zip closure and detachable carabiner belt clip.

Pris 59,00 kr.

På fjernlager

LD Systems Professional In-Ear Headphones
search

LD Systems Professional...

IE HP 2

A good monitor sound in which not only the musician who plays the loudest can be heard clearly, but also your own voice and instrument, is the basis for an excellent performance. Modern in-ear monitoring systems offer a wonderful solution for optimal stage sound. They also help reduce the high volume levels that musicians' ears are often subjected to both on stage and in rehearsal rooms. The IE HP 2 is an extremely light, professional stereo in-ear headphone that boasts a wide transmission range and a clear, balanced sound.

The dynamic driver transmits distortion-free, harmonic frequencies ranging between 20 and 18,000 Hz. The optimised earpiece design ensures maximum environmental sound suppression. Thanks to the silicon and foam design that comes included in three sizes, the IE HP 2 offers maximum shielding and optimal wearing comfort for almost any ear. Its low weight of just 16 grams guarantees comfortable in-ear wear, even over extended periods. And for those who move a lot on the stage, the removable (and exchangeable) 1.55 m cable offers maximum freedom of movement. Once a performance is over, the IE HP 2 in-ear headphone can be safely stored in the included transport case until it is needed again.

Pris 929,00 kr.

På fjernlager

LD Systems Phono Preamplifier and Equalizer
search

LD Systems Phono...

PPA 2

The LD Systems PPA 2 is a very compact analogue phono preamplifier, which equalises the extremely low output signal of conventional turntables to RIAA standards. It allows you to connect to devices without any phono input, such as mixers, PA power amplifiers or sound cards.

The phono inputs are designed as RCA jacks, just like the line outputs; the PPA 2 also has a screw terminal for the ground conductor of the turntable and a 6.3 mm stereo jack for connecting a headset. The THD factor of the preamplifier is below 0.05% and the channel separation is -75 dB.

The LD Systems PPA 2 uses a 12 V AC adapter; a bright LED indicates the power supply on the top of the sturdy metal chassis.

Pris 289,00 kr.

På fjernlager

Rack Stand 6 U
search

Rack Stand 6 U

STRS 6 U
  • Rack stand 6 units high
  • Black finish, drilled tapped for M5 screws
  • 12 screws included
Pris 129,00 kr.

På fjernlager

Rack Stand 12 U
  • På tilbud!
  • -20,00 kr.
search

Rack Stand 12 U

STRS 12 U

  • Rack stand 12 units high
  • Black finish, drilled tapped for M5 screws
  • 24 screws included
Pris 159,00 kr. Normalpris 179,00 kr.

På fjernlager