. Køb Stands & Tripods hos CC ProShop (5) .

Stands & Tripods

NULL

Stands & Tripods

Aktive filtre

  • Status: Disponibel
  • Status: På lager
Tripod Microphone Stand with Boom Arm and Locking Leg
  • På tilbud!
  • -30,00 kr.
search

Tripod Microphone Stand...

S 10 B

This microphone boom stand is made of hardwearing steel tubing with black powder coating finish. It features a durable tripod base with locking leg that eliminates the need for a set screw. Folding the locking leg halfway allows you to slide the leg collar up and down the shaft, folding it to the upper or lower stop locks the collar in place for quick setup or compact transport.

Pris 249,00 kr. Normalpris 279,00 kr.

På fjernlager

Gravity 2-Point Adjustment Telescoping Boom Arm
search

Gravity 2-Point Adjustment...

MS B 22

This telescoping boom arm features a cast aluminium hub with precision 2-point tilt and position adjustment and 3/8" male thread.

The ergonomic set screw knobs are made from high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation.

A convenient quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement.

Pris 239,00 kr.

På fjernlager

Microphone Stand with Boom Arm
  • På tilbud!
  • -30,00 kr.
search

Microphone Stand with Boom...

S 9 B

Small microstand black for guitar, amp, drum, brass a.s.o.

Pris 229,00 kr. Normalpris 259,00 kr.

På fjernlager

Table Microphone Arm with Built-In XLR Cable
  • På tilbud!
  • -40,00 kr.
search

Table Microphone Arm with...

S TBA 01

No matter if you're a podcaster, content creator, or home producer looking to equip your creative workspace with a microphone arm and keep your cables tidy and out of the way, the Adam Hall Stands S TBA 01 is just what you need.

The freely movable and robust microphone arm can be easily attached to any tabletop using the supplied table clamp.

Cables won't get tangled up thanks to the 3 m XLR microphone cable that's integrated inside the arm.

The Adam Hall Stands S TBA 01 microphone arm is perfect for your home studio or multimedia workstation.

Pris 279,00 kr. Normalpris 319,00 kr.

På fjernlager

Tabletop Microphone Stand
  • På tilbud!
  • -20,00 kr.
search

Tabletop Microphone Stand

S 8 BB

Stable microphone stand with base plate made of cast steel. The round base is equipped with rubber feet for soundproofing. The tripod tube can be unscrewed and has a 3/8" thread.

Pris 139,00 kr. Normalpris 159,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base
search

Gravity Microphone Stand...

MS 23 W

The MS 23 is a premium-quality microphone stand with thick walled tubing, white powder-coated finish and 160 cm maximum height. The exceptionally stable round base, made of cast iron, is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

For smooth, durable height adjustment, the MS 23_s handle is made of high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

VARIWEIGHT® compatible _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

An additional set of black coding rings is included with the MS 23; more ring packs are available in a wide array of colours for instant personalization.

Pris 439,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod Base and 2-Point Adjustment Telescoping Boom
search

Gravity Microphone Stand...

MS 4322 W

The MS 4322 is a premium microphone stand which features heavy-duty construction, powder coating and a maximum height of 169 cm. The extremely stable base features a zinc die-cast bell and generously proportioned, precision-folding steel legs with durable rubber caps to protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick-release adjuster enables variable extension to a maximum length of 88 cm, facilitating flexible microphone placement. The smooth yet robust height adjustment grip and screw knobs of the MS 4322 are made from highly durable ABS with a non-slip, soft-touch thermoplastic coating for comfortable use. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

An additional set of black coding rings is included with the MS 4322; more ring packs are available in a wide array of colours for instant personalisation.

Pris 519,00 kr.

På fjernlager

Gravity Short Microphone Stand with Folding Tripod Base and 2-Point Adjustment Boom
search

Gravity Short Microphone...

MS 4221 B

The MS 4221 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the 50 cm boom arm. For easy height adjustment the MS 4221 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4221 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 449,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base and 2-Point Adjustment Boom
search

Gravity Microphone Stand...

MS 2321 B

The MS 2321 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 168 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features convenient 1-point tilt and position adjustment of the 79 cm boom arm. For easy height adjustment the MS 2321 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 2321 B, additional ring packs are available in a wide array of colours for instant personalization.

Pris 529,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod Base
search

Gravity Microphone Stand...

MS 43

The MS 43 is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

For easy height adjustment the MS 43 sports a smooth, durable clutch with an ergonomic threaded handle made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 43, additional ring packs are available in a wide array of colours for instant personalization.

Pris 379,00 kr.

På fjernlager

Gravity Short Microphone Stand with Round Base and 2-Point Adjustment Telescoping Boom
search

Gravity Short Microphone...

MS 2222 B

The MS 2222 B is a premium-quality microphone stand with thick walled tubing, black powder-coated finish and 73 cm maximum height. The exceptionally stable round base, made of cast iron, is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The position and angle of the boom is precisely adjusted with 2 tensioning knobs on the bracket. A quick fastener allows for variable extension to a maximum length of 88 cm, facilitating flexible mic placement. For smooth, durable height adjustment, the MS 4222 B_s handle and knobs are made of high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

An additional set of black coding rings is included with the MS 2222 B; more ring packs are available in a wide array of colours for instant personalization.

VARIWEIGHT® compatible _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

Pris 519,00 kr.

På fjernlager

Microphone Stand with Boom Arm
  • På tilbud!
  • -30,00 kr.
search

Microphone Stand with Boom Arm

S 6 B

Microphone stand black

  • telescopic boom arm
  • plastic-covered metal base with folding legs
Pris 309,00 kr. Normalpris 339,00 kr.

På fjernlager

Gravity Touring Series Tripod Mic Stand Standard Boom
search

Gravity Touring Series...

TMS 4321 B

Tours and events often operate under hard conditions and time pressures. Microphone stands are thrown around and not generally treated gently. That's why Gravity Touring series microphone stands are built to be extremely sturdy. Made with especially strong steel tubing with three folding feet. The base and boom mount are made of indestructible die-cast zinc. The solid metal knobs are unlosable, to ensure that the stands survive the hard conditions of touring longer. The microphone stands are also faster to set up and take down. Turning the locking screw just 3/4 quickly snaps the boom into place. Height adjustment is just as easy, with incredibly quick tightening of the easy-grip, triangular tightening sleeve.

Pris 729,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod and One-Hand Clutch
search

Gravity Microphone Stand...

MS 431 HB

The GMS 431 HB is a premium quality microphone stand with thick walled tubing, powder coated finish and 179 cm maximum height. The heavy duty tripod base is made of die-cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

The GMS 431 HB sports a slim, innovative clutch for convenient one-handed height adjustment. The ergonomic design and soft touch surface of the clutch handle provide a secure grip in all situations. The custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the GMS 431 HB, additional ring packs are available in a wide array of colors for instant personalization.

Pris 469,00 kr.

På fjernlager

Gravity Cab Clamp Microphone Holder for Guitar Cabinets
search

Gravity Cab Clamp...

MS CAB CL 01

This universal clamping system allows you to mic up a guitar cabinet in an easy and revolutionary way. The spring-loaded clamping arm makes the clamp suitable for almost any type of cabinet and securely fastens to the side or top of a cabinet or combo amplifier. Thanks to its adjustable edge grip, the clamp can be adjusted to fit snugly onto recessed edges. The rigid boom is finely adjustable in both boom angle and microphone depth _ this ensures a far more precise and secure mic placement as opposed to using a gooseneck-based clamping system or conventional mic stand.

Pris 409,00 kr.

På fjernlager

Gravity Table-Top Microphone Stand
search

Gravity Table-Top...

MS T 01 B

This table top microphone stand consists of a heavy yet compact die-cast base and a steel tube. Thick rubber covering the whole circumference of the base isolates it from the table and helps to minimise unwanted noise.

Pris 229,00 kr.

På fjernlager

Gravity Cab Clamp - Mic Holder for Guitar Cabs
search

Gravity Cab Clamp - Mic...

MS CAB CL 01 S

This universal clamping system allows you to mic up a guitar cabinet in an easy and revolutionary way. The spring-loaded clamping arm makes the clamp suitable for almost any type of cabinet and securely fastens to the side or top of a cabinet or combo amplifier. Thanks to its adjustable edge grip, the clamp can be adjusted to fit snugly onto recessed edges. The rigid boom is finely adjustable in both boom angle and microphone depth _ this ensures a far more precise and secure mic placement as opposed to using a gooseneck-based clamping system or conventional mic stand.

Pris 409,00 kr.

På fjernlager

Gravity Traveler Microphonestand
search

Gravity Traveler...

MS 5311 BThe Traveler Series' Microphone Stand

Every bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed.

The Gravity® MS 5311 B microphone stand can be taken everywhere you go. It's so light, there's absolutely no need for you to worry about weight or availability.

Despite its light weight, the stand is still sturdy and strong. Its robust leg construction withstands heavy loads and gives the stand a solid foundation. The position and tilt of the boom can be adjusted quickly and easily at the joint with only one clamping screw. The handle, used for smoothly and securely adjusting the stand's height, and the clamping screw are made of exceptionally durable ABS plastic and covered with a non-slip soft-touch thermoplastic coating for comfortable operation.

Gravity® has once again delivered a useful and reliable product for you to round off your collection of stands.
Pris 239,00 kr.

På fjernlager

Gravity Short Heavy Duty Microphone Stand with Folding Tripod Base
search

Gravity Short Heavy Duty...

MS 3122 HDB

Ideal for bass drum micing, the GMS 3122 HDB is a premium quality microphone stand with thick walled tubing, powder coated finish and 32 cm height. The tripod base is made of die cast zinc while the legs are made of strong and heavy folding steel. Hefty rubber cabs for surface protection complete the picture of the stand.

The boom hub features precision 2-point tilt and position adjustment of the telescoping arm. A quick fastener allows for easily variable extension to a maximum length of 88 cm, and the custom designed retainer requires no tools for quick and secure mic clip attachment.

A set of black coding rings is included with the GMX 3122 HDB, additional ring packs are available in a wide array of colors for instant personalization.

Pris 489,00 kr.

På fjernlager

Gravity Touring Series Microphone Stand with 2-Point Adjustment Telescoping Boom
search

Gravity Touring Series...

TMS 4322 B

Tours and events often operate under hard conditions and time pressures. Microphone stands are thrown around and not generally treated gently. That's why Gravity Touring series telescopic boom microphone stands are built to be extremely sturdy. Made with especially strong steel tubing with three folding feet. The base and boom mount are made of indestructible die-cast zinc. Theboom has an adjustment range of 51 to 88 cm. The screw-on counterweight has a specially designed locking nut for microphone clips. The solid metal knobs are unlosable, to ensure that the stands withstand the rigours of the road for longer. The microphone stands are also faster to set up and take down. Turning the locking screw just 3/4 quickly snaps the boom into place. Height adjustment is just as easy and extremely quick via the easy-grip, triangular tightening sleeve.

Pris 779,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base and One-Hand Clutch
search

Gravity Microphone Stand...

MS 231 HB

The GMS 231 HB is a premium-quality microphone stand with thick walled tubing, black powder-coated finish and 175 cm maximum height. The exceptionally stable round base is made of heavy-duty cast iron, while a rubber ring on the bottom ensures acoustic isolation and surface protection.

The GMS 231 HB features a new and especially convenient single-handed height adjustment function fitted with a non-slip ergonomic handle that makes it very easy to use at all times. The custom-designed retainer requires no tools for quick and secure microphone clip attachment.

VARIWEIGHT® compatible _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

An additional set of black coding rings is included with the GMS 231 HB; more ring packs are available in a wide array of colours for clear personalization. For increased stability, a 2.3 kg weight disc is available as an accessory (article no. GWS2WP) that is easy to assemble without tools.

Pris 519,00 kr.

På fjernlager

Gravity Short Microphone Stand with Folding Tripod Base and 2-Point Adjustment Telescoping Boom
search

Gravity Short Microphone...

MS 4222 B

The MS 4222 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 74 cm maximum height. The folding tripod base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 4222 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4222 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 469,00 kr.

På fjernlager

Gravity Microphone Stand with Round Base and 2-Point Adjustment Telescoping Boom
search

Gravity Microphone Stand...

MS 2322 B

The MS 2322 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 168 cm maximum height. The heavy duty round base made of cast iron is equipped with a rubber bottom to provide acoustic isolation and protect surfaces.

The boom hub features precision 2-point tilt and position adjustment of the telescoping boom arm. A quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement. For easy height adjustment the MS 2322 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 2322 B, additional ring packs are available in a wide array of colours for instant personalization.

Pris 559,00 kr.

På fjernlager

Gravity Microphone Stand with XLR Connector and Gooseneck
  • På tilbud!
  • -90,00 kr.
search

Gravity Microphone Stand...

MS 23 XLR B

Enabling ultra flexible microphone orientation, this premium quality stand features a 36.5 cm gooseneck on a thick walled 114.5 cm tube and a heavy duty round base made of cast iron.

The gooseneck integrates a 3-pin female XLR connector for directly attaching a microphone while the tube sports a lateral XLR mic cable connector at the bottom end. This permits quick, clean setup without mic clips and running the cable up the stand.

To extend the stand's height and increase stability, additional XLR goosenecks and a weight disc are available as accessories.

Pris 699,00 kr. Normalpris 789,00 kr.

På fjernlager

Gravity Microphone Stand with Folding Tripod Base and 2-Point Adjustment Boom
search

Gravity Microphone Stand...

MS 4321 B

The MS 4321 B is a premium quality microphone stand with thick walled tubing, powder coated finish and 169 cm maximum height. The heavy duty tripod base is made of die cast zinc for an accurate fit of the ultra strong folding legs of steel with hefty rubber caps for surface protection.

The boom hub features precision 2-point tilt and position adjustment of the 79 cm boom arm. For easy height adjustment the MS 4321 B sports a smooth, durable clutch with threaded handle. The ergonomic knobs and clutch handle are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation, and the custom designed retainer requires no tools for quick and secure microphone clip attachment.

A set of black coding rings is included with the MS 4321 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 489,00 kr.

På fjernlager

Speaker Pole M20 Thread
  • På tilbud!
  • -20,00 kr.
search

Speaker Pole M20 Thread

SPS 822

Extendable speaker pole, steel black, with M20 screw thread.

Pris 259,00 kr. Normalpris 279,00 kr.

På fjernlager

Gravity Adjustable Two-Part Speaker Pole
search

Gravity Adjustable Two-Part...

SP 3332 TPB

The SP 3332 TP B is a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 105 to 140 cm. The SP 3332 TP B features a 35 mm bottom end and steel collar with set screw and safety pin to securely lock the extension pole in place. The base tube is a two-piece assembly that can be unscrewed to result in an amazingly short transport length of 54 cm only. The SP 3332 TP B comes with a convenient rubber retainer to secure the safety pin during transport.

Pris 309,00 kr.

På fjernlager

Gravity Adjustable Touring Speaker Pole 35 mm to M 20
  • På tilbud!
  • -70,00 kr.
search

Gravity Adjustable Touring...

TSP 2332 B

To make sure that you can mount your speakers on your subwoofers in a time-saving and optimal way during tough touring conditions, Gravity offers the TSP 2332 B speaker pole.

The solid construction made of black powder-coated steel is height adjustable from 82 to 140 cm using the automatic LockPin® mechanism specially designed for the Touring series. This makes setup much faster, because the height adjustment lock snaps automatically into place when pulled up. No additional pin is required. The Gravity TSP 2332 B has an M20 thread at the bottom end of the pole, so you can simply screw it onto your subwoofer.

Pris 549,00 kr. Normalpris 619,00 kr.

På fjernlager

Gravity Adjustable Speaker Pole 35 mm to M20
search

Gravity Adjustable Speaker...

SP 2332 B

The SP 2332 B is a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 82 to 140 cm. The SP 2332 B features an M20 bottom end and steel collar with set screw and safety pin to lock the extension pole in place. It comes with a convenient rubber retainer to secure the safety pin during transport.

Pris 249,00 kr.

På fjernlager

LD Systems Ceiling Mounting Bracket for CURV 500 Satellites
search

LD Systems Ceiling Mounting...

CURV 500 CMB

The LD Systems CURV 500® ceiling mount bracket is custom designed to mate with the CURV 500® SmartLink adapter. It is made of powder coated steel, 360° rotatable and allows for a very low ceiling clearance to the speaker (only 15 mm). The bracket comes with a 20 cm safety rope to secure the CURV satellites attached to the adapter in accordance with BGV C1. Available in black or white.

Note:

Under the statutory provisions (BGV C1 § 7 "Protection against falling objects") speakers must additionally be secured for attachment to a wall bracket by means of a steel rope, for example.

Pris 339,00 kr.

På fjernlager

LD Systems Ceiling Mounting Bracket for CURV 500 Satellites
search

LD Systems Ceiling Mounting...

CURV 500 CMB W

The LD Systems CURV 500® ceiling mount bracket is custom designed to mate with the CURV 500® SmartLink adapter. It is made of powder coated steel, 360° rotatable and allows for a very low ceiling clearance to the speaker (only 15 mm). The bracket comes with a 20 cm safety rope to secure the CURV satellites attached to the adapter in accordance with BGV C1. Available in black or white.

Note:

Under the statutory provisions (BGV C1 § 7 "Protection against falling objects") speakers must additionally be secured for attachment to a wall bracket by means of a steel rope, for example.

Pris 339,00 kr.

På fjernlager

Wall Mount for Speakers
search

Wall Mount for Speakers

SPSG 3 B

Speaker bracket for mounting small units to walls or ceilings. Ideally suited to surround speakers in home theatre applications. The universal ball joint allows speakers to be swivelled to any angle.

Please note:

On account of statutory regulations (BGV-C1 §7 "Protection against falling objects"), loudspeakers, in addition to being attached to a wall bracket, must be secured against falling with a device such as a wire rope.

Pris 299,00 kr.

På fjernlager

Gravity Tilt-and-Swivel Wall Mount for Speakers up to 30 kg
search

Gravity Tilt-and-Swivel...

SP WMBS 30 B

Made of powder-coated steel and providing horizontal plus vertical adjustment for precision aiming, this Gravity wall mount supports loudspeakers up to 30 kg. Side to side swivel is 160° while down tilt is continuously variable to a maximum of 40°. The heavy duty 6 mm wall plate features a safety rope eyelet in accordance with BGV C1. The GSPWMBS 30 comes with a universal plate that attaches to the speaker for easy hook-in mounting. It is available in black (GSPWMBS30B) or white (GSPWMBS30W).

Pris 469,00 kr.

På fjernlager

Gravity Tilt-and-Swivel Wall Mount for Speakers up to 20 kg
search

Gravity Tilt-and-Swivel...

SP WMBS 20 W

Made of powder-coated steel and providing horizontal plus vertical adjustment for precision aiming, this Gravity wall mount supports loudspeakers up to 20 kg. Side to side swivel is 160° while down tilt is continuously variable to a maximum of 40°. The heavy duty 5 mm wall plate features a safety rope eyelet in accordance with BGV C1. The SP WMBS 20 comes with a universal plate that attaches to the speaker for easy hook-in mounting. It is available in black (GSPWMBS20B) or white (GSPWMBS20W).

Pris 399,00 kr.

På fjernlager

Gravity Tilt-and-Swivel Wall Mount for Speakers up to 20 kg
search

Gravity Tilt-and-Swivel...

SP WMBS 20 B

Made of powder-coated steel and providing horizontal plus vertical adjustment for precision aiming, this Gravity wall mount supports loudspeakers up to 20 kg. Side to side swivel is 160° while down tilt is continuously variable to a maximum of 40°. The heavy duty 5 mm wall plate features a safety rope eyelet in accordance with BGV C1. The SP WMBS 20 comes with a universal plate that attaches to the speaker for easy hook-in mounting. It is available in black (GSPWMBS20B) or white (GSPWMBS20W).

Pris 399,00 kr.

På fjernlager

Wall Mount for Speakers
search

Wall Mount for Speakers, Black

SMBS 5

Wall mount speaker bracket with mounting pole

  • Adjustable tilt

Please note:

On account of statutory regulations (BGV-C1 §7 "Protection against falling objects"), loudspeakers, in addition to being attached to a wall bracket, must be secured against falling with a device such as a wire rope (e.g., Adam Hall S53102B or S53100).

Pris 279,00 kr.

På fjernlager

LD Systems Speaker Stands for 16 mm Flange
  • På tilbud!
  • -30,00 kr.
search

LD Systems Speaker Stands...

SPS 16

Robust speaker stand for devices with a 16mm flange. A perfect accessory for many mobile LD Systems products.

Pris 289,00 kr. Normalpris 319,00 kr.

På fjernlager

Rugged Studiomonitor Stand with Spacious Tray
  • På tilbud!
  • -40,00 kr.
search

Rugged Studiomonitor Stand...

SKDB 040

This 86 cm high loudspeaker stand is ideal for studio monitors and home speakers and is fitted with a triangular foot with an edge length of 44.5 cm. The foam-padded steel tray provides 28 x 28 cm standing space, which is sufficient for all standard monitor speakers.

The exceptionally sturdy design made with black powder-coated steel carries a maximum weight of 40 kg. Delivery also includes 4 cable clips for tidy cable organisation, as well as a set of steel spikes.

Pris 429,00 kr. Normalpris 469,00 kr.

På fjernlager

Speaker Stand
  • På tilbud!
  • -50,00 kr.
search

Speaker Stand

SPS 56 BBlack aluminium speaker stand with pneumatic suspension

Pneumatic suspension at no extra charge! The air cushioning guarantees a secure descent and easier handling of the speaker.

Pris 429,00 kr. Normalpris 479,00 kr.

På fjernlager

Truss adapter for 35 mm tripod mounts
search

Truss adapter for 35 mm...

TRA 36

Truss adapter for 35 mm tripod mounts (e.g. for speaker stands) with variable width (20-40 cm). Indentations for common truss systems facilitate set-up and ensure a central position. Locking pins and cotter pins are included.

Pris 319,00 kr.

På fjernlager

Speaker Stands
  • På tilbud!
  • -40,00 kr.
search

Speaker Stands

SPS 54 B

  • Steel speaker stand
  • Very stable due to double bracing
  • All joints constructed of metal
  • With "safety-pin" security lock
Pris 429,00 kr. Normalpris 469,00 kr.

På fjernlager

Gravity Speaker Stand
search

Gravity Speaker Stand, 35...

SP 5211 W

The SP 5211 is a classic tripod speaker stand made of strong but lightweight aluminium tubing with black powder coating. It has a 50 kg load capacity and a maximum height of 195 cm.

The redesigned, extremely durable mounting of the support feet is made of aluminium pressure die-casting. The steel cuff of the height adjustment is virtually indestructible and ensures additional stability. A safety stud locks the 35 cm, strong extension tube.

The ergonomic buttons on the locking screws are made from highly-resistant ABS with a non-slip soft-touch coating made of thermo-plastic for convenient operation.

The SP 5211 is delivered with an additional set of black coding rings; additional rings are available in many different colours for distinct personalisation.

Pris 579,00 kr.

På fjernlager

Gravity Loudspeaker Stand with Base and Cast Iron Weight Plate
search

Gravity Loudspeaker Stand...

SSP WB SET 1 W

This rugged speaker stand has a much smaller footprint than tripods and features a 35 mm rod with high-strength steel sleeve as well as an ergonomic locking screw and safety stud for secure height adjustment. The stand is adjustable in 7.5 cm increments from 1.05 to 1.8 m. It comes with an additional weight disc from our patented VARI-WEIGHT® stability system, ensuring both a more secure footing and more convenient transport of the system as a whole. It comes with an additional weight disc from our patented VARI-WEIGHT® stability system, ensuring both a more secure footing and more convenient transport of the system as a whole. The flat round base and the additional disc weigh 17.1 Kg in total, thereby ensuring excellent stability.

Pris 1.209,00 kr.

På fjernlager

Gravity Short Loudspeaker Stand 35 mm
search

Gravity Short Loudspeaker...

SP 5111 B

If you want to set up your loudspeakers in a stable and secure way, or place your laptop in a firm and safe position, the SP 5111 B, as a short classic tripod loudspeaker stand, is exactly the right thing for you. It is made of sturdy but lightweight aluminium with black powder coating and can support up to 35 kg at a maximum height of 132 cm.

The Loudspeaker stand is excellent for attaching the Gravity® LTS TRAY 1 laptop tray and other 36 mm attachments that you need to use based on your body height.

Its mounting for the base is manufactured from die-cast aluminium. The steel sleeve for adjusting the height is virtually indestructible and offers additional stability. A locking pin holds the 35 mm thick extension tube in place. The ergonomic knobs for the set screws are made of highly durable ABS plastic and covered with a non-slip soft-touch thermoplastic coating for comfortable handling. Thanks to its compact size and low weight of 1.94 kg, the short loudspeaker stand is perfect for portable use.

An extra set of black coding rings comes supplied with the Gravity® SP 5111 B Loudspeaker stand; additional rings are also available in many different colours to add your own personal touch.

Pris 419,00 kr.

På fjernlager

Gravity Pneumatic Speaker Stand
search

Gravity Pneumatic Speaker...

SP 5211 ACB

The GSP 5211 ACB is a classic tripod speaker stand made from thick walled, yet lightweight powder coated aluminium tubing with a maximum height of 195 cm. Featuring a built-in air brake it allows you to lower loads up to 50 kg with minimum effort.

The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. To provide superior strength the height adjustment collar is made of steel and is virtually indestructable. A safety pin securely locks the 35 mm diameter extension pole in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation.

A set of black coding rings is included with the SP 5211 ACB, additional ring packs are available in a wide array of colors for instant personalization.

Pris 579,00 kr.

På fjernlager

Speaker Stands
  • På tilbud!
  • -30,00 kr.
search

Speaker Stands, Black

SPS 023

Can be fixed secure in 5 steps (each step 17 cm) with included safety bolt

Pris 239,00 kr. Normalpris 269,00 kr.

På fjernlager

Speaker Stand Set 2 Speaker Stands with Bag
search

Speaker Stand Set 2 Speaker...

SPS 023 SETSpeaker stand set with transport bag - set composed of 2 black aluminium speaker stands (SPS023) and one transport bag.
Pris 669,00 kr.

På fjernlager

Gravity Touring series Steel Speaker Stand with Auto Lockpin
search

Gravity Touring series...

TSP 5212 LB

The hard conditions and extreme time pressures of touring are for strong workers and robust materials only - such as the Gravity Touring series speaker stand. Extremely sturdy, with three double-braced legs and a die-cast aluminium mounting bracket. Especially strong steel tubing for a 50 kg load capacity. Set-up and take-down are extremely quick and safe thanks to the automatic, snap-in LockPin®. The 35 mm extension pole is locked into place and the pin can only be unlocked with the release lever. The loudspeaker stand can be adjusted to a height of up to 194 cm. The locking screws, with solid, unlosable metal knobs, are an invaluable advantage when touring.

Pris 799,00 kr.

På fjernlager

Gravity Speaker Stand Set of 2 Speaker Stands
search

Gravity Speaker Stand Set...

SS 5212 B SET 1

This set includes two Gravity GSP5212B tripod speaker stands and the padded heavy duty GBGSS2B carry bag for convenient, easy transport.

Pris 1.489,00 kr.

På fjernlager

Gravity VARI®-TILT Studio Monitor Speaker Stand
search

Gravity VARI®-TILT Studio...

SP 3202 VT

The Gravity® studio monitor stand SP 3202 VARI®-TILT features a heavy, triangular base made of cast iron and a 250 x250 mm steel tray with isolating foam rests. It is tilt-adjustable by 10° and height-adjustable from 930 to 150 mm for optimum speaker positioning. The stand is supplied with a set of spikes. Mounted on the large, integrated rubber feet, these ensure effective coupling to the floor.

Pris 759,00 kr.

På fjernlager

Gravity Loudspeaker Stand with Base and Cast Iron Weight Plate
search

Gravity Loudspeaker Stand...

SSP WB SET 1

This rugged speaker stand has a much smaller footprint than tripods and a 35 mm rod with a high-strength steel sleeve, ergonomic locking screw and safety stud for secure height adjustment. This stand is adjustable from 1.05 to 1.8 m in 7.5 cm increments. It comes with an additional weight disc from our patented VARI-WEIGHT® stability system, ensuring both a more secure footing and more convenient transport of the system as a whole. The flat round base and the additional disc weigh 17.1 kg in total, thereby ensuring excellent stability.

Pris 1.049,00 kr.

På fjernlager

Gravity Wind-Up Speaker Stand
search

Gravity Wind-Up Speaker Stand

SP 4722 B

The Gravity GSP 4722 B is a heavy-duty speaker stand with a convenient hand crank and rack and pinion that make it easy to raise your speakers to the desired height. It is made of hard-wearing steel tubing with a folding tripod base and durable cast aluminium leg collar. A large knob set screw and safety pin secure the telescoping pole, which extends from 1.5 m to a maximum height of 2.4 m. The stand is TÜV/GS certified.

Pris 1.509,00 kr.

På fjernlager

Microphone Clamp
search

Microphone Clamp

D 902

Large microphone clamp with rubber-like clamp. Variable fit. The microphone can be easily removed with one hand. For wireless microphones. 3/8" and 5/8" thread.

Pris 39,00 kr.

På fjernlager

Gravity Traveler extension
search

Gravity Traveler extension

MATE 01The Traveler Series' Extension

Every bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed.

The Gravity® MA TE 01 can be taken everywhere you go. It's so light and space-saving, there's absolutely no need for you to worry about weight or storage space.

This tool lets you extend almost all available Traveler products by 100 mm. The increased load caused by the extension is counteracted by an adapted ball head in the joint. The arm is easy to implement and gives you extra flexibility for your Traveler accessories.

Gravity® has once again delivered a small, useful and reliable product for you to round off your collection of stands.
Pris 79,00 kr.

På fjernlager

Gravity Traveler 3D Arm with Pop Filter
search

Gravity Traveler 3D Arm...

MA 3D A POP 1The Traveler Series' Pop Filter with 3D Arm

Every bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed.

The Pop Filter with 3D Arm MA 3D A POP 1 can be taken everywhere you go. It's so light and space-saving, there's absolutely no need for you to worry about weight or storage space.

With this tool you can enhance your voice- and vocal recordings by placing the high-quality pop filter, with double nylon mesh and a large screen diameter of 15.7 cm between you and your microphone. This way you avoid unwanted pop noises and clipping.

Its fastening mechanism is quick and easy to assemble. The large clamping range from 15 to 35 mm lets you mount it on all popular microphone stands, and the three joints' 360° rotation options allow you to install it as you like. Simply loosen, adjust and tighten the wing-screws. Voila - you're all done! Once set, the MA 3D A POP 1 stays locked in place.

Gravity® has once again delivered a small, useful and reliable product for you to round off your collection of stands.
Pris 199,00 kr.

På fjernlager

Gravity Pop Filter with VARI®-ARM
search

Gravity Pop Filter with...

MA POP 1

To make sure your pop filter successfully filters undesired pop noises and clipping, you need to be able to position it perfectly in front of your mouth. This is simple with the Gravity MA POP 1 pop filter, with its large screen diameter, double nylon mesh and VARI®-ARM.

The VARI®-ARM allows you to position the pop filter precisely where it will work best, and then fix into position so that it won't shift.

All joints can be moved using only one single adjustment screw. Once the desired position has been achieved, you simply tighten the screw to fix the whole VARI®-ARM. This way, your pop filter won't slip out of position while you're sitting at your desk creating a podcast or standing in the studio booth recording vocals.

The solid clamp fits on any microphone stand, on the edge of a table or any other surface you want to attach it within the clamping range of 15 mm to 35 mm.

Pris 509,00 kr.

På fjernlager

Gravity Handheld Wireless Microphone Clip
search

Gravity Handheld Wireless...

MS CLMP 34

This microphone clip acommodates most handheld wireless microphones with shaft diameters ranging from 34 to 42 mm. Made of unbreakable high-quality elastic material, it firmly holds your mic and tilts for perfect positioning. The clip has a standard 5/8" female thread and includes a 3/8" adapter to fit all mic stands and boom arms.

Pris 49,00 kr.

På fjernlager

Tilbage til toppen

Mest solgte

AFMONTERINGSNØGLER BLAUPUNKT 2 STK.
search

AFMONTERINGSNØGLER...

Vægt (Emb.) 60g
Rumfang (Emb.) 0.00074025
Bredde (Emb.) 94mm
Længde (Emb.) 225mm
Højde (Emb.) 35mm
Pris 19,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.