. Køb 19" Rack Fastening Solutions hos CC ProShop .

19" Rack Fastening Solutions

NULL

19" Rack Fastening Solutions

Aktive filtre

  • Status: Disponibel
Mounting kit with 4 screws M6
search

Mounting kit with 4 screws M6

HUMFREESThe Adam Hall® Humfrees against humming noises

During rack mounting, ground connections are created between the devices via the metal rails. This is the most common cause of humming noises! Our Hummfrees interrupt these ground loops, the devices are electrically isolated from each other and attached to the rails. An additional effect: the front panels of the devices are protected from mounting damage.

Quick and easy to install: Pull the device 5 cm out of the rack, fold the Humfrees sideways around the corners of the front panel and fasten the device back into the rack with the screws. Now just make sure that the devices do not touch each other directly on the surfaces. Existing cable connections in the rack do not need to be disconnected.

For M5 screws you can use our enclosed adapter sleeves.

Pris 79,00 kr.

På fjernlager

19" L-Support Rails / Brackets Set
search

19" L-Support Rails /...

876 TL
  • Can be adapted to different rack rail spacings due to 45.5 mm long openings
  • Fits in all standard 19'' rack cabinets and cases
  • 1.5 mm material thickness, black powder-coated
  • Enables secure installation of heavy 19'' equipment
  • Maximum load capacity of 37.5 kg
  • 2 pieces in a set
Pris 159,00 kr.

På fjernlager

Rack Strip aluminium - 2 x 2 meter
search

Rack Strip aluminium - 2 x...

6169

Aluminium single sliding rack strip

  • For side mounting shelf support in rear of racks with no rear double rack strip
  • Supplied with rubber insert for arresting special M6 nut 5666
Pris 409,00 kr.

På fjernlager

Heavy Duty Double Rack Strip black 45 U
search

Heavy Duty Double Rack...

61555 BLK

Heavy duty rack strip with three holes per U

  • 9.5 mm hole size (according to IEC 60297)
Pris 429,00 kr.

På fjernlager