. Cage Nut M6 for 2 mm - 100 stk. .
Cage Nut M6 for 2 mm - 100 stk.
search
  • Cage Nut M6 for 2 mm - 100 stk.

Cage Nut M6 for 2 mm - 100 stk.

509,00 kr.
Inkl. moms
5653
  • Cage nut M6 for 6150 (aluminium rear rail punched)
Antal
På fjernlager

Ref: 5653

Product typeFittings
Typecage nut
MaterialSteel
Surfacechromium plated
Coloryellow
Thread sizeM6
Weight0,003 kg
Adam Hall 19" Parts
5653

Specifikke referencer

16 andre varer i den samme kategori:

19" L-Support Rails / Brackets Set
search

19" L-Support Rails /...

876 TL
  • Can be adapted to different rack rail spacings due to 45.5 mm long openings
  • Fits in all standard 19'' rack cabinets and cases
  • 1.5 mm material thickness, black powder-coated
  • Enables secure installation of heavy 19'' equipment
  • Maximum load capacity of 37.5 kg
  • 2 pieces in a set
Pris 159,00 kr.

På fjernlager

Heavy Duty Double Rack Strip black 45 U
search

Heavy Duty Double Rack...

61555 BLK

Heavy duty rack strip with three holes per U

  • 9.5 mm hole size (according to IEC 60297)
Pris 429,00 kr.

På fjernlager

Rack Strip aluminium - 2 x 2 meter
search

Rack Strip aluminium - 2 x...

6169

Aluminium single sliding rack strip

  • For side mounting shelf support in rear of racks with no rear double rack strip
  • Supplied with rubber insert for arresting special M6 nut 5666
Pris 409,00 kr.

På fjernlager

Mounting kit with 4 screws M6
search

Mounting kit with 4 screws M6

HUMFREESThe Adam Hall® Humfrees against humming noises

During rack mounting, ground connections are created between the devices via the metal rails. This is the most common cause of humming noises! Our Hummfrees interrupt these ground loops, the devices are electrically isolated from each other and attached to the rails. An additional effect: the front panels of the devices are protected from mounting damage.

Quick and easy to install: Pull the device 5 cm out of the rack, fold the Humfrees sideways around the corners of the front panel and fasten the device back into the rack with the screws. Now just make sure that the devices do not touch each other directly on the surfaces. Existing cable connections in the rack do not need to be disconnected.

For M5 screws you can use our enclosed adapter sleeves.

Pris 79,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.