. Køb 19" Rack Accessories hos CC ProShop (2) .

19" Rack Accessories

19" Rack Accessories

Aktive filtre

  • Status: Disponibel
  • Mærker: Adam Hall 19" Parts
Rack Strip aluminium - 2 x 2 meter
search

Rack Strip aluminium - 2 x...

6169

Aluminium single sliding rack strip

  • For side mounting shelf support in rear of racks with no rear double rack strip
  • Supplied with rubber insert for arresting special M6 nut 5666
Pris 409,00 kr.

På fjernlager

Heavy Duty Double Rack Strip black 45 U
search

Heavy Duty Double Rack...

61555 BLK

Heavy duty rack strip with three holes per U

  • 9.5 mm hole size (according to IEC 60297)
Pris 429,00 kr.

På fjernlager

19" U-Shaped Rack Panel Universal 1 U
search

19" U-Shaped Rack Panel...

872212

1 U rack pannel with punched holes for 2 x female XLR, 6 x male XLR and 1 x IEC mains socket.

Pris 139,00 kr.

På fjernlager

19" Front Panel with Plexiglass Insert 2 U
search

19" Front Panel with...

87442
  • 19" Cover with plexiglass front for protecting settings on effects units, etc
Pris 249,00 kr.

På fjernlager

19" U-Rack Panel 0.5 U
search

19" U-Rack Panel 0.5 U,...

872205 LBL

If you want to label your rack panel for a better overview, the 872205 LBL is the safe choice.

The front surface is intended for labeling. You can easily insert the included labeling strip via a plastic rail at the front.

Pris 89,00 kr.

På fjernlager

19" 2U Rack Drawer with keyboard outlet | steel
search

19" 2U Rack Drawer with...

87412 KEYBOARDComputer keyboard tray
  • Available in either 19" rackmount for keyboards up to 435 mm x 235 mm x 70 mm
  • Includes self adhesive strips to hold keyboard in position.
  • Cable access at rear of tray
Pris 1.209,00 kr.

På fjernlager

19" Angled Rack Panel for 8 x D-TYPE Sockets
search

19" Angled Rack Panel for 8...

872230

19" angled rack panel with 8 cutouts for D-type sockets - with rear strain relief rail.

The mounting holes are fitted with M3 threads; the tilt angle is 30°.

The front overhead surface is intended for labels - a magnetic labelling strip is included.

Pris 339,00 kr.

På fjernlager

19" U-Shaped Rack Panel 12 Sockets 1 U with Tie Bar
search

19" U-Shaped Rack Panel 12...

872215

1 U rack panel with punched holes for 12 universal _D_ type XLR sockets

  • With integral strain relief
  • Integrated tie bar including 12cable ties.
Pris 149,00 kr.

På fjernlager

19" Rack Tray 4U | with steel clamps
search

19" Rack Tray 4U - with...

8759

19" Rack Tray for mounting of non-standard equipment

  • With strong, adjustable clampingsteel bars
Pris 529,00 kr.

På fjernlager

19" Rack Tray 4U | 375 mm depth
search

19" Rack Tray 4U - 375 mm...

87554

19" Rack Tray, extra deep, for units with a depth of up to 375 mm

  • Rear edge is raised 10 mm for enhanced stability
  • Usable interior width: 435 mm
  • Air vents in the sides
Pris 339,00 kr.

På fjernlager

19" Rack Tray 2U | with velcro
search

19" Rack Tray 2U - with velcro

8756

19" Rack Tray for top mounting in open top rack. Supplied with self-adhesive Velcro to enable small mixers, effects, etc., to be mounted. Steel, black powder coated.

Pris 459,00 kr.

På fjernlager

19" Rack Tray 3U | with steel clamps
search

19" Rack Tray 3U - with...

8758

19" Rack Tray for mounting of non-standard equipment

  • With strong, adjustable clampingsteel bars
Pris 409,00 kr.

På fjernlager

19" Rack Tray 3U | 375 mm depth
search

19" Rack Tray 3U - 375 mm...

87553

19" Rack Tray extra deep for mounting non standard equipment with a depth of up to 375 mm

  • Rear edge is folded up 10 mm for extra stability
  • Internal width: 435mm
  • Ventilation slots in sides
Pris 319,00 kr.

På fjernlager

19" Rack Tray 2U
search

19" Rack Tray 2U

8755

If you want to install devices in the rack that do not correspond to the standard 19" dimensions, here is the right tray for you. The universal hole pattern is suitable for mounting many different devices.

Pris 269,00 kr.

På fjernlager

Rack Tray 2U | with steel clamps
search

Rack Tray 2U - with steel...

8757

19" Rack Tray for mounting of non-standard equipment

  • With strong, adjustable clampingsteel bars
Pris 359,00 kr.

På fjernlager

Separating Web deep for 19" Drawers 2 U
search

Separating Web deep for 19"...

87402 SEPARATOR LENGTHWISE

Partitioning for Adam Hall Rack Drawer 2U or higher. P1 fits across the width of the drawer, P2 fits along the depth. Use as many as required to create further compartments.

Pris 79,00 kr.

På fjernlager

Separating Web transverse for 19" Drawers 2 U
search

Separating Web transverse...

87402 SEPARATOR CROSSWISE

Partitioning for Adam Hall Rack Drawer 2U or higher. P1 fits across the width of the drawer, P2 fits along the depth. Use as many as required to create further compartments.

Pris 79,00 kr.

På fjernlager

Universal Separating Web System for Rack Drawers 2 U
search

Universal Separating Web...

87402 SEPARATOR UNIVERSAL

Universal Partitioning for Rack Drawers 2 U or higher, or any drawer (office, etc.) with a minimum internal height of 70 mm. With click joiners at each end. Can be easilycut to the required length.

Pris 79,00 kr.

På fjernlager

Microphone Insert for 87406 Rack Drawer 6U
search

Microphone Insert for 87406...

87406 MICROPHONE INLET

Our practical storage solution for 25 microphones in the 6U drawer. It is made of high-quality two-tone foam. If you love order in your rack, you can't go past out 87406 MICROPHONE INLET. Not only can you admire a well-organized rack drawer, but you can also protect your equipment during transport.

Pris 509,00 kr.

På fjernlager

KYOTO FOAM Inlay for 2U rack drawers can be cut to size
search

KYOTO FOAM Inlay for 2U...

KYOTO FOAMDrawer organisation made easy with Kyoto foam

There are numerous products and options available to make sorting and organising the contents of 19" rack drawers easy. From foam inserts for microphones to adjustable dividers and pre-cut foam elements, all products offer excellent solutions. However, Kyoto's foam offers an unprecedented level of adaptability and flexibility while maintaining both durability and stability.

All that is needed to create a custom cavity is a sharp knife (included). The genius of Kyoto foam is that it consists of 5 layers that are firmly glued together, but can be separated from each other without leaving glue residue on the main part. This allows for different depth levels when cutting and does not require a CNC machine.

For the perfect measurements, simply place the part on the foam and trace the outline on the foam with a marker. Using the knife included in the kit, carefully cut along the outline on the foam. Make sure that you only cut into the desired layers. The cut-out area can now be clamped, the layers levered open from below and the segment pulled out.

Pris 229,00 kr.

På fjernlager

Microphone Foam Inlay for 2U Rack Drawer
search

Microphone Foam Inlay for...

87402 MICROPHONE INLET

Our practical storage solution for wireless microphones for the 2U rack drawer is made of high-quality, sturdy EVA foam. With separate compartments for bodypacks and batteries.

If you love order in the rack, you can't go past our 87402 MICROPHONE INLET. Not only does it allow you to admire a well-organized rack drawer, it also protects your equipment during transport.

Pris 429,00 kr.

På fjernlager

19
  • På tilbud!
  • -60,00 kr.
search

19" 3U Rack Drawer with...

87403 COMBILOCKOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Standard" range with combilock of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a combination lock for secure storage of the contents, a handle with latching function and is removable.

Pris 1.199,00 kr. Normalpris 1.259,00 kr.

På fjernlager

19
  • På tilbud!
  • -110,00 kr.
search

19" 3U Rack Drawer with...

87403 ALU COMBILOCKOrganization is half the rack!

Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.

Our "Standard" range with combilock of 19" drawers from Adam Hall® with full-extension runners on ball bearings is made of steel and is therefore robust. The drawer has a combination lock for secure storage of the contents, a handle with latching function and is removable.

Pris 1.399,00 kr. Normalpris 1.509,00 kr.

På fjernlager

Tilbage til toppen

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.