Scandomestic GD510BDDSS -...
- Styringstype: Elektromekanisk
- Farve: Rustfrit Stål
- Mærke: Scandomestic
- Nettovægt I Kg: 60
- Bredde (cm): 60
På fjernlager
.
Filtrer efter
Status
Selections
Mærker
Pris
19,00 kr. - 68.999,00 kr.
Der er 597 varer.
Aktive filtre
På fjernlager
På fjernlager
På fjernlager
GCF 1803 X er et 3-sektions frysebord på 214 liter, med praktisk integreret bagkant på bordpladen, som forhindrer spild bag disken. Frysebordet er perfekt til frys opbevaring og tilberedning af dine råvarer på den store, slidstærke, 50 mm bordplade, som er meget nem at gøre ren. GCF 1803 X er både udvendigt og indvendigt produceret af den bedste stålkvalitet.
Fryseborde er ideelle til cafeer, delikatesser, lufthavnscatering, restauranter og hoteller, samt alle fødevareproducerende virksomheder med et storkøkken som har behov for en god og overskuelig arbejdsplads.
Display
Udvendigt digital kontrolpanel er placeret i en ergonomisk og brugervenlig position.
Intuitiv digital kontrol gør det muligt at justere temperaturparametrene nemt og hurtigt, og displayet viser altid temperaturen ved drift.
Interiør
Frysebordet har Epoxy-coatede trådhylder, med en maksimal kapacitet på op til 40 kg.
Hylderne er justerbare med 3 intervaller med 70 mm imellem, hvilket sikrer en fantastisk fleksibilitet i frysebordets indretning.
Hyldestørrelse er GN 1/1 = 530 x 325 mm, og der medfølger 1 stk. hylde pr. dør fra fabrikken.
Ønskes flere hylder, kan de tilkøbes som ekstra udstyr. Bestil RES-27198 for 1 stk. Epoxi-belagt GN 1/1 wire hylde.
Funktion
Optimal temperatur sikres med innovativt, intelligent luftcirkulationssystem.
Selvlukkende dør og justerbare ben
Frysebordet kommer venstre hængslet, men kan også højre hængsles. Døren er solid i rustfrit stål i fuld længde,
med integreret håndtag der undgår støv- og snavsopsamling.
Døren har en 120° dvæleposition, og lukker automatisk ved mindre end 90° hvilket minimerer temperaturstigninger.
Højdejusterbare ben i rustfrit stål fra 125 til 200 mm, kan udskiftes til hjul som kan tilkøbes som ekstra udstyr. Bestil RES-27364 for 1 sæt med 4 hjul, diameter 100mm, 2 hjul m. bremser
Afløb & rengøring
Afløb kan tømmes direkte ud på gulvet via bundprop ved indvendig rengøring, men det er også muligt at installere permanent afløbsslange. Derudover er frysebordet udstyret med automatisk afrimning.
Aftagelig tætningsliste i dør for bedre og mere hygiejnisk rengøring. Tætningslisten er også nem at skifte ved slitage uden tilkald af montør, således er det nemt at bevare de isolerende egenskaber.
Hylder og vægskinner kan nemt fjernes uden brug af værktøj. Desuden er det indvendige kabinet udført med buede samlinger, som gør rengøring endnu nemmere.
Kabinet
Indvendig og udvendig konstruktion lavet af rustfrit stål af høj kvalitet. AISI 304 rustfri stål indvendigt og AISI 201 rustfri stål udvendigt. Isolering 50 mm tykkelse, CFC-fri. Lågerne kan vendes, det kræver et dør-vendings-kit, som kan tilkøbes som ekstra udstyr.
På fjernlager
GCF 1352 X er et 2-sektions frysebord på 143 liter, med praktisk integreret bagkant på bordpladen, som forhindrer spild bag disken. Frysebordet er perfekt til frys opbevaring og tilberedning af dine råvarer på den store, slidstærke, 50 mm bordplade, som også er meget nem at gøre ren. GCF 1352 X, er både udvendigt og indvendigt produceret af den bedste stålkvalitet.
Fryseborde er ideelle til cafeer, delikatesser, lufthavnscatering, restauranter og hoteller, samt alle fødevareproducerende virksomheder med et storkøkken som har behov for en god og overskuelig arbejdsplads.
Display
Udvendigt digital kontrolpanel er placeret i en ergonomisk og brugervenlig position.
Intuitiv digital kontrol gør det muligt at justere temperaturparametrene nemt og hurtigt, og displayet viser altid temperaturen ved drift.
Interiør
Frysebordet har Epoxy-coatede trådhylder, med en maksimal kapacitet på op til 40 kg.
Hylderne er justerbare med 3 intervaller med 70 mm imellem, hvilket sikrer en fantastisk fleksibilitet i frysebordets indretning.
Hyldestørrelse er GN 1/1 = 530 x 325 mm, og der medfølger 1 stk. hylde pr. dør fra fabrikken.
Ønskes flere hylder, kan de tilkøbes som ekstra udstyr. Bestil RES-27198 for 1 stk. Epoxi-belagt GN 1/1 wire hylde.
Funktion
Optimal temperatur sikres med innovativt, intelligent luftcirkulationssystem.
Selvlukkende dør og justerbare ben
Frysebordet kommer venstre hængslet, men kan også højre hængsles. Døren er solid i rustfrit stål i fuld længde,
med integreret håndtag der undgår støv- og snavsopsamling.
Døren har en 120° dvæleposition, og lukker automatisk ved mindre end 90° hvilket minimerer temperaturstigninger.
Højdejusterbare ben i rustfrit stål fra 125 til 200 mm, kan udskiftes til hjul som kan tilkøbes som ekstra udstyr. Bestil RES-27364 for 1 sæt med 4 hjul, diameter 100mm, 2 hjul m. bremser
Afløb & rengøring
Afløb kan tømmes direkte ud på gulvet via bundprop ved indvendig rengøring, men det er også muligt at installere permanent afløbsslange. Derudover er frysebordet udstyret med automatisk afrimning.
Aftagelig tætningsliste i dør for bedre og mere hygiejnisk rengøring. Tætningslisten er også nem at skifte ved slitage uden tilkald af montør, således er det nemt at bevare de isolerende egenskaber.
Hylder og vægskinner kan nemt fjernes uden brug af værktøj. Desuden er det indvendige kabinet udført med buede samlinger, som gør rengøring endnu nemmere.
Kabinet
Indvendig og udvendig konstruktion lavet af rustfrit stål af høj kvalitet. AISI 304 rustfri stål indvendigt og AISI 201 rustfri stål udvendigt. Isolering 50 mm tykkelse, CFC-fri.
På fjernlager
GUR 700 X er et heldørs køleskab på 461 liter, med praktisk integreret lås i døren. Køleskabet er udvendigt og indvendigt produceret af den bedste stålkvalitet.
Skabet er Ideelt til lager af kølevarer i enhver fødevareproducerende virksomhed og storkøkken.
Tilsvarende lager fryseskab fås i samme design og dimensioner.
Display
Udvendigt digital kontrolpanel er placeret i en ergonomisk og brugervenlig position.
Intuitiv digital kontrol gør det muligt at justere temperaturparametrene nemt og hurtigt, og displayet viser altid temperaturen ved drift.
Interiør
Køleskabet har Epoxy-coatede trådhylder, med en maksimal kapacitet på op til 40 kg.
Hylderne er justerbare med 23 intervaller med 55 mm imellem, hvilket sikrer en fantastisk fleksibilitet i køleskabets indretning.
Velegnet til madbeholdere GN 2/1 eller 2 x GN 1/1. Der medfølger 3 stk. GN 2/1 hylde fra fabrikken.
Ønskes flere hylder, kan de tilkøbes som ekstra udstyr.
Funktion
Køleskabet har Intelligent luftcirkulationssystem, som sikrer perfekt ventileret køling med dets innovative luftstrømsdesign. Integreret dørkontakt stopper ventilationen, når døren åbnes, hvilket sparer energi.
Selvlukkende dør og justerbare ben
Køleskabet kommer højre hængslet, men kan også venstre hængsles. Døren er solid i rustfrit stål i fuld længde, med integreret håndtag der undgår støv- og snavsopsamling.
Døren har en 120° dvæleposition, og lukker automatisk ved mindre end 90° hvilket minimerer temperaturstigninger.
Højdejusterbare ben i rustfrit stål fra 125 til 200 mm, kan udskiftes til hjul som kan tilkøbes som ekstra udstyr. Ydermere kan der tilkøbes fodpedal for håndfri døråbning.
Rengøring
Aftagelig tætningsliste i dør for bedre og mere hygiejnisk rengøring. Tætningslisten er også nem at skifte ved slitage uden tilkald af montør, således er det nemt at bevare de isolerende egenskaber.
Hylder er justerbare og desuden er det indvendige kabinet udført med buede samlinger, som gør rengøring endnu nemmere. Bundpanel med vandafløb specielt designet til at gøre rengøringen hurtigere og lettere.
Kabinet
Indvendig og udvendig konstruktion lavet af rustfrit stål af høj kvalitet, AISI 201 rustfri stål udvendig og AISI 304 rustfri stål indvendigt. Isolering 60 mm tykkelse, CFC-fri. Kabinettet matcher fryseskab GUF 700 X
På fjernlager
På fjernlager
På fjernlager
På fjernlager
På fjernlager
På fjernlager
På fjernlager
På fjernlager
På fjernlager
Den intuitive elektronisk styrede blæstkøler-/fryser er perfekt til hurtig nedkøling eller nedfrysning af varm mad fra komfuret eller ovnen og sikrer samtidig fødevaresikkerheden, hygiejnen og opfylder myndighedernes krav.
Blæstkøleren reducerer hurtigt temperaturen på både friske råvarer og færdigretter, men opbevarer dem også uden at ændre deres friskhed og kvalitetsegenskaber. Blæstkøleren kan også anvendes som kølet mellemlager i produktionsområdet, lagerkøl _ frys, eller til skånsom optøning. En blæstkøler -/fryser er med sine mange fordele en stor gevinst for storkøkkener i en travl hverdag. Det gør det nemmere at planlægge, gør det muligt at udvide menutilbud, reducerer madspild og dermed også god mulighed for at øge driftsoverskuddet.
Blæstkølere og frysere er ideelle til hospitaler, plejehjem, catering, restauranter, delikatesser, lufthavnscatering, fødevareindustrien, bagerier og konditorier mfl.
Temperaturspyd & display:
Med det integrerede varespyd/temperaturspyd er det nemt at følge temperaturen i fødevarens kerne.
Udvendig kontrolpanel er placeret i en ergonomisk og brugervenlig position.
Displayet viser resttiden eller temperaturen ved drift.
Kapacitet & drift:
Scancool blæstkøler -/ fryser GBC 10 passer til 10 stk. GN 1/1 eller 10 stk. euronorm
De aftagelige vægskinner har 65 mm afstandsintervaller.
Nedkølingskapaciteten er 18 kg og nedfrysningskapaciteten 10 kg per cyklus
Selvlukkende dør og justerbare ben:
Blæstkøleren -/fryseren kommer højre hængslet men kan ved tilkøb af et dør-kit også venstre hængsles.
Døren er solid i rustfrit stål i fuld længde, med integreret håndtag, der undgår støv- og snavsopsamling.
Døren har en 120° dvæleposition og lukker automatisk ved mindre end 90° hvilket minimerer temperaturstigninger.
Højdejusterbare ben i rustfrit stål fra 125 til 200 mm, kan udskiftes til hjul som kan tilkøbes som tilbehør
Afløb & rengøring:
Drypbakken er nem at tømme fra fronten, men det er også muligt at installere permanent afløbsslange.
Ydermere kan afløb tømmes direkte ud på gulvet via bundprop ved indvendig rengøring.
Aftagelig tætningsliste i dør for bedre og mere hygiejnisk rengøring, og kabinettet er indvendigt udført med buede samlinger som også letter rengøringen.
Aftagelige vægskinner.
Kabinet:
Indvendig og udvendig konstruktion lavet af rustfrit stål af høj kvalitet. AISI 304 rustfri stål indvendig og AISI 201 rustfri stål udvendig. Isolering 60 mm tykkelse, CFC-fri.
På fjernlager
Den intuitive elektronisk styrede blæstkøler-/fryser er perfekt til hurtig nedkøling eller nedfrysning af varm mad fra komfuret eller ovnen og sikrer samtidig fødevaresikkerheden, hygiejnen og opfylder myndighedernes krav.
Blæstkøleren reducerer hurtigt temperaturen på både friske råvarer og færdigretter, men opbevarer dem også uden at ændre deres friskhed og kvalitetsegenskaber. Blæstkøleren kan også anvendes som kølet mellemlager i produktionsområdet, lagerkøl _ frys, eller til skånsom optøning. En blæstkøler -/ fryser er med sine mange fordele en stor gevinst for storkøkkener i en travl hverdag. Det gør det nemmere at planlægge, gør det muligt at udvide menutilbud, reducerer madspild og dermed også god mulighed for at øge driftsoverskuddet.
Blæstkølere og frysere er ideelle til hospitaler, plejehjem, catering, restauranter, delikatesser, lufthavnscatering, fødevareindustrien, bagerier og konditorier mfl.
Temperaturspyd & display:
Med det integrerede varespyd/temperaturspyd er det nemt at følge temperaturen i fødevarens kerne.
Udvendig kontrolpanel er placeret i en ergonomisk og brugervenlig position.
Displayet viser resttiden eller temperaturen ved drift.
Kapacitet & drift:
Scancool blæstkøler -/ fryser GBC 05 passer til 5 stk. GN 1/1 eller 5 stk. euronorm
De aftagelige vægskinner har 65 mm afstandsintervaller.
Nedkølingskapaciteten er 18 kg og nedfrysningskapaciteten 10 kg per cyklus
Selvlukkende dør og justerbare ben:
Blæstkøleren -/fryseren kommer højre hængslet men kan ved tilkøb af et dør-kit også venstre hængsles.
Døren er solid i rustfrit stål i fuld længde, med integreret håndtag, der undgår støv- og snavsopsamling.
Døren har en 120° dvæleposition og lukker automatisk ved mindre end 90° hvilket minimerer temperaturstigninger.
Højdejusterbare ben i rustfrit stål fra 125 til 200 mm, kan udskiftes til hjul som kan tilkøbes som tilbehør.
Afløb & rengøring:
Drypbakken er nem at tømme fra fronten, men det er også muligt at installere permanent afløbsslange.
Ydermere kan afløb tømmes direkte ud på gulvet via bundprop ved indvendig rengøring.
Aftagelig tætningsliste i dør for bedre og mere hygiejnisk rengøring, og kabinettet er indvendigt udført med buede samlinger som også letter rengøringen.
Aftagelige vægskinner.
Kabinet:
Indvendig og udvendig konstruktion lavet af rustfrit stål af høj kvalitet. AISI 304 rustfri stål indvendig og AISI 201 rustfri stål udvendig. Isolering 60 mm tykkelse, CFC-fri.
På fjernlager
På fjernlager
Produktmål, HxBxD, mm 900 x 600 x 600
Ovnstørrelse, ltr 60
_ Multifunktionsovn med ægte varmluft
_ 8 madlavningsfunktioner inklusive grill- og optøningsfunktion
_ Rummelig magasinskuffe
_ Glaskeramisk HiLight kogeplade med restvarmeindikator
_ Ekstra dyb bradepande, bageplade og rist
_ SteamClean-funktion for nem rengøring af ovnen
Fritstående komfur med glaskeramisk kogeplade og traditionel 60 liters el ovn. Energiklasse A og klassisk hvidt design med brugervenlige drejeknapper. FCC800W er ideel til dig, der ønsker et enkelt komfur, som er nemt at bruge og vedligeholde.
Funktion
Med 9 ovnfunktioner, heriblandt ægte varmluft kan komfuret håndtere de fleste madlavningsopgaver i køkkenet.
Enkel styring via drejeknapper gør det enkelt og brugervenligt.
To lag glas i ovnlågen giver en kølig frontflade, så ingen kan brænde sig.
De fire zoner har to forskellige størrelser, 14 cm og 18 cm, så de passer til både små og store gryder og pander.
Rummelig magasinskuffe til opbevaring af rist og plader. Bradepanden er ekstra dyb og dermed kan der bages og laves lasagne med mere direkte i bradepanden.
Rengøring
Drejeknapperne er aftagelige, hvilket har sin fordel ved rengøring hvis der er spildt ned over panelet og ind under knapperne.
Der er fuldt glas i inder lågen, hvilket gør det let at rengøre glasset. Desuden kan glasset i ovnlågen nemt skilles ad og tages ud.
Udtagelige skinner for pladder, gør det nemt at rengøre hele ovnrummet. Det er også enkelt at tage ovnpakning ud samtidig med rengøring af ovnen, og hvis den er slidt og står til udskiftning.
Ved brug af SteamClean program, skal du blot hælde 0,5 liter vand i bradepanden, sætte ovnen på 50 grader og vente ca. 30 min. Derefter tørrer du ovnen over med en fugtig klud.
Udstyr
1 ekstra dyb bradepande
1 bageplade
1 grillrist
Komfuret leveres uden kabel
På fjernlager
Produktmål, HxBxD, mm815 x 598 x 570
Lydniveau, dB(A)42
_ 7 programmer, Touch-kontrol, LED-display
_ 42 dB(A) støjniveau, 1-24H forsinket start
_ Underbygningsmodel, 14 kuverter
_ 3 stativer, justerbar øverste kurv med fuldt udtræk og lejer
_ Aqua stop, Ekstra tørring, Ekstra kraftig vask, Dobbeltvask
_ Indikator for salt og afspændingsmiddel
På fjernlager
På fjernlager
På fjernlager
WB 431 B
This large heavy steel base for M20 poles provides a firm footing and three female threads that allow you to mount extra weights off centre. Two integrated handles facilitate transport while felt- covered feet prevent scratches and marks on the floor.
På fjernlager
XSP 1057
Additional clip to expand the Gravity VARI®-G guitar stand series
På fjernlager
WB 123 WPB
Adding 5 kg extra weight for increased stability this cast iron plate installs to our speaker pole base part no. GWB123B without the need for tools.
På fjernlager
In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.
With the VARI®-ARM M 14, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from an action cam to a mobile recorder - almost anywhere and in any direction in a matter of seconds.
The VARI®-ARM M 14 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position. Its main feature: Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM M 14 is held tight and safe.
Both ends of the VARI®-ARM M 14 have 1/4" threads on which you can attach almost any camera, handheld recorder or smartphone holder on the market. You can then screw the VARI®-ARM to a Super Clamp with a 1/4" mount and fix your equipment to a truss in the studio or on stage.
As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM M 14's usability.
På fjernlager
In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.
With the VARI®-ARM L TV, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from microphone clamps to super clamps and lighting equipment - almost anywhere and in any direction in a matter of seconds.
The VARI®-ARM L TV is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position. Its main feature: Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM L TV is held tight and safe.
Perfect for truss mountingBoth ends of the VARI®-ARM L TV have a 16 mm TV spigot for attaching the VARI®-ARM to a Super Clamp. You can unscrew the two TV16 spigots. This frees up a 1/4" thread to which you can attach a microphone clamp, pop filter and more.
As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM L TV's usability.
På fjernlager
In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.
With the VARI®-ARM M 38, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from a microphone clamp to a tablet or an action cam - almost anywhere and in any direction in a matter of seconds.
The VARI®-ARM M 38 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position. Its main feature: Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM M 38 is held tight and safe. Thanks to the 3-kilogram load capacity, you can even mount a DSLM camera including a standard lens or a heavyweight microphone such as the broadcast classic RE-20.
There is a 3/8" thread at the head of the VARI®-ARM for you to screw on a microphone clip, a pop filter and more. The included adapter (3/8" to 1/4" reduction thread) gives you complete flexibility, allowing you to use almost any camera, handheld recorder or smartphone mount on the market with the VARI®- ARM M 38. Thanks to the solid clamp at the bottom of the VARI®-ARM and its large clamping range from 15 to 35 mm, the VARI®-ARM can also be easily attached to most tables and poles (e.g. to tripods). The clamp can also be unscrewed to reveal a 3/8" thread for mounting the VARI®-ARM onto other equipment.
As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM M 38's usability.
På fjernlager
In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.
With the VARI®-ARM L 38, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from a microphone clamp to a tablet or an action cam - almost anywhere and in any direction in a matter of seconds.
The VARI®-ARM L 38 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position.
Its main feature:Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM L 38 is held tight and safe. The included adapter (3/8" to 1/4" reduction thread) gives you complete flexibility, allowing you to use almost any camera, handheld recorder or smartphone mount on the market with the VARI®- ARM L 38.
Thanks to the solid clamp at the bottom of the VARI®-ARM and its large clamping range from 15 to 35 mm, the VARI®-ARM can also be easily attached to most tables and poles (e.g. to tripods). The clamp can also be unscrewed to reveal a 3/8" thread for mounting the VARI®-ARM onto other equipment.
As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM L 38's usability.
På fjernlager
XSP 10130
Small helpers - big impact. With the XSP 10130 rack brackets, you can use your Gravity® DJ Desk in an even more versatile and comfortable way. Whether you want to add 19'' equipment to your studio centre, attach a rack drawer for accessories or simply place a power strip firmly and securely within reach, the Gravity® rack brackets offer a multitude of possible applications.
The robust brackets are made of powder-coated steel and are quickly and easily mounted to the rear rail of the FDJ T 01 DJ table via locking screws. As they are two individual brackets, you can adjust the width and positioning as required. The mounting is done via the integrated cage nuts.
På fjernlager
SA SM IF 01
Those who do not place their studio monitors on a table surface, but use dedicated stands and mounts for monitoring in their own studio, are already doing a lot of things correct. Nevertheless, studio monitors also generate oscillations and vibrations here, which are transferred to the supporting surface and can thus impair the stereo image of the speakers. Usually, the larger the surface, the more energy transfer takes place. With the SA SM IF 01 absorber pucks, Gravity has a solution ready that can have a big impact with small means.
The Gravity Absorber pucks can be placed freely under a loudspeaker (e.g. studio monitor) and achieve a decoupling of the loudspeaker cabinet and the installation surface due to their silica gel surface. This significantly reduces vibrations and oscillations and makes the stereo image more precise by reducing acoustic smearing and discolouration.
The load capacity is 36 kg when using four Gravity SASMIF01 absorber pucks, which means that most speakers on the market can be used without any problems.
På fjernlager
Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ Desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes.
The DJ Desk offers enough space to place two decks and a mixing console or your DJ controller. Your performance setup with samplers, sequencers and synthesizers will also find enough room thanks to a surface depth of 50 cm and a width of 119 cm.
In case you need additional space, simply expand the Gravity® DJ Desk with an optionally available laptop holder or two studio monitor holders. The rear rail also offers further flexible expansion options that are tailored to your individual needs as a DJ, producer or instrumentalist.
You will have no trouble adapting the desk to your individual height. It can be set between 68 cm and 109 cm
More stability is provided by the adjustable levelling feet, which compensate for any unevenness of the floor, and the mountable cross bar, which significantly strengthens the table.
På fjernlager
Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes.
Your trusty monitors can be placed on the height-adjustable, 360° rotatable and 15° tiltable trays. The precise positioning and inclination of your loudspeakers is made much easier for you by a precise scale on the tubes.
Your laptop is enthroned at the heart of your set-up in the middle of the table, held firmly in place by the integrated pins so that even if tilted extremely, it is always secure. Both loudspeaker and laptop trays can be adjusted precisely along the rear rail of the Gravity® FDJT 01 DJ Desk by shifting them to the left or right.
You will have no trouble adapting the desk to your individual height. It can be set between 680 mm and 1090 mm and offers you plenty of space for your equipment - with a usable depth of 500 mm and a width of 1190 mm.
More stability is provided by the adjustable levelling feet, which compensate for any unevenness of the floor, and the mountable cross bar, which significantly strengthens the table.
På fjernlager
Designed to support the proper posture for playing classical guitar, this Gravity footrest offers 6 adjustable height levels from 18 to 255 mm to perfectly adapt to any player. The rubber tipped feet are angled outwards to increase stability and prevent tipping over, and the extra wide construction with non-slip rubber pad provides a secure grip of any foot.
På fjernlager
XW GLOVE L
Everything today is done digitally: lights, audio and video operate on networks and can be controlled from everywhere and at any time using touchscreens. Hybrid events even sometimes take audiences into the virtual world. Yet no stage in the world can be put up at the touch of a button. The heavy lifting still needs to be done manually. Speakers, spotlights, mixing consoles and many other things still have to be pre-loaded into cases and trucks by hand. And that's why Gravity developed the XW GLOVE working gloves to make the work of anyone who has to turn events into a physical reality: safer, efficient and more comfortable.
The XW GLOVE gloves feature two types of materials: the fingers and palm are made of durable goat leather and the back of the hand of elastic jersey. A good fit is ensured by the rubber band and the velcro fastener. Goat leather sets itself apart from other types of leather because it has no oily residues, helping it to remain soft and be more resilient and tear-resistant than other kinds of leather.
There is also an opening for the thumb and index finger on the XW GLOVE that allows digital applications to be accessed at any time, even when toiling away on the stage and in the warehouse. Apps and remote software on smartphones and tablets required for taking care of daily business in all fields can thus be used quickly and freely without always having to remove your gloves. Carrying out high-precision work by hand is also made easier at the same time: small parts can be grabbed, turned and pulled, tape can be ripped, etc.
The Gravity XW GLOVE gloves are available in black in sizes M, L and XL.
På fjernlager
XW GLOVE XL
Everything today is done digitally: lights, audio and video operate on networks and can be controlled from everywhere and at any time using touchscreens. Hybrid events even sometimes take audiences into the virtual world. Yet no stage in the world can be put up at the touch of a button. The heavy lifting still needs to be done manually. Speakers, spotlights, mixing consoles and many other things still have to be pre-loaded into cases and trucks by hand. And that's why Gravity developed the XW GLOVE working gloves to make the work of anyone who has to turn events into a physical reality: safer, efficient and more comfortable.
The XW GLOVE gloves feature two types of materials: the fingers and palm are made of durable goat leather and the back of the hand of elastic jersey. A good fit is ensured by the rubber band and the velcro fastener. Goat leather sets itself apart from other types of leather because it has no oily residues, helping it to remain soft and be more resilient and tear-resistant than other kinds of leather.
There is also an opening for the thumb and index finger on the XW GLOVE that allows digital applications to be accessed at any time, even when toiling away on the stage and in the warehouse. Apps and remote software on smartphones and tablets required for taking care of daily business in all fields can thus be used quickly and freely without always having to remove your gloves. Carrying out high-precision work by hand is also made easier at the same time: small parts can be grabbed, turned and pulled, tape can be ripped, etc.
The Gravity XW GLOVE gloves are available in black in sizes M, L and XL.
På fjernlager
XW GLOVE M
Everything today is done digitally: lights, audio and video operate on networks and can be controlled from everywhere and at any time using touchscreens. Hybrid events even sometimes take audiences into the virtual world. Yet no stage in the world can be put up at the touch of a button. The heavy lifting still needs to be done manually. Speakers, spotlights, mixing consoles and many other things still have to be pre-loaded into cases and trucks by hand. And that's why Gravity developed the XW GLOVE working gloves to make the work of anyone who has to turn events into a physical reality: safer, efficient and more comfortable.
The XW GLOVE gloves feature two types of materials: the fingers and palm are made of durable goat leather and the back of the hand of elastic jersey. A good fit is ensured by the rubber band and the velcro fastener. Goat leather sets itself apart from other types of leather because it has no oily residues, helping it to remain soft and be more resilient and tear-resistant than other kinds of leather.
There is also an opening for the thumb and index finger on the XW GLOVE that allows digital applications to be accessed at any time, even when toiling away on the stage and in the warehouse. Apps and remote software on smartphones and tablets required for taking care of daily business in all fields can thus be used quickly and freely without always having to remove your gloves. Carrying out high-precision work by hand is also made easier at the same time: small parts can be grabbed, turned and pulled, tape can be ripped, etc.
The Gravity XW GLOVE gloves are available in black in sizes M, L and XL.
På fjernlager
With the Rapid Desk extension CART L 01 AC 1, you can transform your CART L 01 B together with the Rapid Desk (KS RD 1) into a stable, mobile work surface in no time at all.
The extension is made of powder-coated steel and - like all Gravity® stands - extremely stable and robust. In combination with the Rapid Desk (KS RD 1), a generous maximum load capacity of up to 50 kg is achieved on the top tier. On the lower tier, up to 120 kg can be transported.
For assembly, the screwed supports are simply inserted into the recesses in the middle of the Rapid Desk, the trolley is unfolded and extended to the now maximum possible dimension. No further fastening or screwing of the support is necessary.
På fjernlager
CART L 01 BEasy work with heavy equipment
Sound technicians, DJs and stagehands: Take the weight off your load with a multi-functional cart. The Gravity Cart L 01 B chassis is made of steel to ensure stability. Two fixed and two rotating low-rolling resistance, anti-slip tyres provide extra maneuverability even for higher curbs or rough terrain.
The Gravity Cart is your trusty companion before and after every show. And the best thing: The light-weight, compact-folded, multi-functional cart lifts easily from the tour bus while also performing effortlessly when fully loaded with equipment. With its up to 1.35 m extendable chassis and 170 kg load capacity, your equipment is quickly and safely transported to and from the stage.
And thanks to its optimal ergonomic design: without straining your back.
På fjernlager
The BG CART M1 wagon bag is a practical solution for carrying smaller items of equipment with the Gravity® CART M 01 B.
Made from robust, water-repellent 1680D nylon, it provides protection and stability for your equipment. The simple assembly allows for easy attachment to the handles of the Gravity® CART Medium. The adjustable straps allow the length of the bag to be adapted to the set length of the CART, so that the bag remains flexible and foldable even after assembly.
The Gravity® BG CART M1 wagon bag is robust, flexible and simply practical - an indispensable aid for transporting equipment.
På fjernlager
CART M 01 BMakes Light Work of Heavy Equipment
Sound technicians, DJs and stagehands: Take the weight off your load with a multi-functional cart. The Gravity Cart chassis is made of steel to ensure rigidity. Two fixed and two rotating low-rolling resistance, anti-slip rubber tyres provide extra manoeuvrability. The Gravity Cart is your trusty companion before and after every show. And the best thing is: The light-weight, compact-folded, multi-functional cart lifts easily from the tour bus while also performing effortlessly when fully loaded with equipment. With its (up to 1.09 m) extendable chassis and 150 kg load capacity, your equipment is quickly and safely transported to and from the stage. And thanks to its optimal ergonomic design: without straining your back.
På fjernlager
Forget wobbly speaker pole connections and twisting PA speakers! With the Gravity® Grip Lock, your PA speakers stay firmly and securely in place.
The SA GRIP LOCK is a steel locking adapter for 35mm tripod poles. With its ergonomic design, the Grip Lock is quick and easy to set up and also provides a low-resonance connection to your speaker.
How does it work?
The expanding flap-system with its robust components is easily adjusted by turning the top adjustment screw. This holds the speaker securely in place and prevents it from twisting or wobbling. The adapter is secured to the tripod with the lower set screw which in turn ensures a tight fit on the tripod.
With the SA GRIP LOCK you get more than just a secure hold. It gives you a trusted tool in your audio setup, designed to perform without failure.
På fjernlager
Universal Ring Pack suitable for all Gravity products.
På fjernlager
Whether you're an event technician, small event organiser or retailer, the SA BELT 1 B crowd barrier cassette for stand mounting offers you absolute flexibility for barriered zones, regulated visitor flow, and highlighting of walkways.
The Gravity® SA BELT 1 B crowd barrier cassette can be extended up to two meters and is self-tensioning. For the required hold of the belt, the retractable belt system has a useful locking function, whereby the belt is solidly held in place. Any number of barrier cassettes can be combined with each other via the typical three strap clips. With the SA BELT 1 B, there is no need to buy stands twice and fill up your storage space unnecessarily, as a 5/8" thread is integrated in the cassette itself, both at the top and bottom. Simply screw them onto any microphone or speaker stand with 3/8", 5/8" or M10 threads.
And to make sure you always have the right adapter at hand, the necessary adapters are included with this very cleverly conceived barrier belt system.
With the SA BELT 1 B , Gravity® offers you a versatile system to signalise short and long walkways, for entrance control, stage barriers or trade fairs.
På fjernlager
Universal Ring Pack suitable for all Gravity products.
På fjernlager
Universal Ring Pack suitable for all Gravity products.
På fjernlager
Universal Ring Pack suitable for all Gravity products.
På fjernlager
Universal Ring Pack suitable for all Gravity products.
På fjernlager
Universal Ring Pack suitable for all Gravity products.
På fjernlager
Universal Ring Pack suitable for all Gravity products.
På fjernlager
Universal Ring Pack suitable for all Gravity products.
På fjernlager
Sometimes only a few centimetres are missing in height or length for perfect micing. In order to extend the boom of your microphone stand or to raise it without having to own a collection of stands, Gravity® gives you a simple tool with which you can raise or extend any microphone stand.
The Gravity® MA SPACE 38 S is made of sturdy steel, 50 mm long and suitable for extending any equipment with a 3/8" thread. It is easily attached in no time and can also be combined with other spacers. The possibilities are almost unlimited.
På fjernlager
This telescoping boom arm features a cast aluminium hub with precision 2-point tilt and position adjustment and 3/8" male thread.
The ergonomic set screw knobs are made from high-grade ABS with a soft touch, non-slip thermoplastic coating for comfortable operation.
A convenient quick fastener allows for variable extension to a maximum length of 88 cm facilitating flexible mic placement.
På fjernlager
The LS M20 KEY is ideal for tightening the M20 thread inserts on LS 431 B / LS 431 W / LS 331 B In addition, the feet of the stand can be tightened as required.
På fjernlager
Universal Ring Pack suitable for all Gravity products.
På fjernlager
Universal Ring Pack suitable for all Gravity products.
På fjernlager
Everything has been prepped and the event can begin - then someone accidentally knocks over a stand and the real fun begins. To ensure that valuable pieces of equipment - microphones, speakers, spotlights and more - are stable and secure, the Gravity® portfolio now includes the new BG SB sandbags - individually fillable bags for easy attachment to stand legs. In addition to stage use, the BG SB bags also ensure greater safety in film and photography work - for example when a diffuser or softbox needs to be raised to great height over a C-stand The bags also stabilize equipment when using Content Creator and Videocaster, which for optical reasons work with a long boom arm or a lighter table stand. The Gravity® sandbag keeps you rock steady.
The BG SB sandbags are available in two versions: SMALL for mic stands and LARGE for C-stands and loudspeaker and lighting stands. Handling the bags is as easy as it is effective. Each bag has two inner bags that can be filled with sand, gravel or other materials as desired - and fit perfectly into the two recesses. The BG SB sandbag is then simply set down on the stand base or leg to hold the stand down firmly and reliably. The carrying handles offer additional comfort so that the bags can be gripped and repositioned with one hand.
To ensure that potentially heavily filled bags do not slide down on steep stand legs, they have a special non-slip mesh surface on the underside. In this way, the BG SB can be quickly and easily attached, removed and set back down again during hectic changeovers. (Velcro fasteners and straps are not necessary to fasten the bag to the stand leg). If strong winds are an issue, you can use the integrated metal eyelets on the corners to securely connect the bags to the stand using cable ties or rope.
For worry-free use on open-air stages and restaurant terraces, or for outdoor film shoots, the BG SB features a water-repellent outer material made of 1680D nylon, which makes sure that the sand or gravel inside do not become moist.
På fjernlager
Sometimes only a few centimetres are missing in height or length for perfect micing. In order to extend the boom of your microphone stand or to raise it without having to own a collection of stands, Gravity® gives you a simple tool with which you can raise or extend any microphone stand.
The Gravity® MA SPACE 38 L is made of sturdy steel, 300 mm long and suitable for extending any equipment with a 3/8" thread. It is easily attached in no time and can also be combined with other spacers. The possibilities are almost unlimited.
På fjernlager
Universal Ring Pack suitable for all Gravity products.
På fjernlager
Vægt (Emb.) | 60g |
Rumfang (Emb.) | 0.00074025 |
Bredde (Emb.) | 94mm |
Længde (Emb.) | 225mm |
Højde (Emb.) | 35mm |
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.