. Køb Professionel lyd hos CC ProShop .

Filtrer efter

Status

Mærker

  • 0,00 kr. - 10.799,00 kr.

Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

Professionel lyd

Professionel lyd

Aktive filtre

  • Status: Disponibel
  • Mærker: K_NIG / MEYER
  • Mærker: ORG.MAKERS BRAND
Trådløst dommersæt - MULTICOM-3SET
search

Trådløst dommersæt -...

Multicom transceivers for referees,
case with a set of 3,
consists of 3 multicom transceivers, 3 headsets for referees, 3 upper arm bags, 3 USB charging cables, 3 lanyards.

  • Wireless full-duplex communication (simultaneous listening and talking) for up to 5 people while another 94 people can listen at the same time
  • Cost-efficient use w/o licence fees
  • Easy to use: switch on the device, position headset and start communicating
  • Operating time: up to 10 hours
  • Applicable across Europe (due to 2.4 GHz ISM band)
  • Different groups can be set up
  • Operating range: up to 200 m
  • AES 128-bit encryption
  • Clear voice transmission with very low susceptibility to ambient noise
  • Adjustable microphone sensitivity
  • Splashproof
  • Micro USB charging port
  • 2 headset jacks
  • Intended application:

  • Sport events (e.g. for referees)
  • Concerts and conferences
  • Building sites and industrial use
  • Service sector


Licence-free in the EU.

Pris 10.799,00 kr.

På lager

Intercom sæt - G-7SET
search

Intercom sæt - G-7SET

Pair of professional dual-band transceivers,
case set,
consisting of 2 transceivers with belt clip, 2 clip-on mics with earphones, charger for 2 transceivers, 2 rech. battery packs.
  • 8 PMR channels 446 MHz
  • 69 LPD channels 433 MHz
  • Boost function for a wide operating range
  • High-performance rech. batteries for high operational availability
  • Manual transmit mode (PTT) or hands-free voice-activated transmit mode (VOX)
  • Monitoring function
  • Automatic squelch
  • Channel scan mode (SCAN)
  • CTCSS tones
  • Dual watch
  • Vibracall function
  • Key lock
  • Backlit LCD
  • Supplied in a robust hard-sided case

Licence-free, please refer to instruction manual on the MONACOR website.
Pris 2.999,00 kr.

På lager

Sender - ATT100
search

Sender - ATT100

Tour guide transmitter

  • 10+10 pre-programmed channels, channels 1-10 are transmitting with low power (operating range: approx. 200 m), channels 11-20 are transmitting with increased power (PMR446 standard: high operating range of up to 2 km)
  • High battery capacity for continuous announcements of up to 6 hours
  • Fully programmable (depending on the application)
  • 3 different operating modes can be selected:

  • Continuous transmission
  • Voice control
  • Control via push-to-talk buttons (PTT)

  • Matching the tour guide receiver ATR200
  • Supplied with belt clip, lanyard


Licence-free, please refer to instruction manual on MONACOR's website.

Pris 1.039,00 kr.

På fjernlager

19´´ modul m/4 blæsere - DPVEN-04
search

19´´ modul m/4 blæsere -...

482 mm ventilation module (19''), 1 RS, with 4 fans

  • For installation into 482 mm racks
  • External temperature control with 1.2 m connection cable, adjustable range: 0-60 °C
  • Illuminated on/off switch
  • Black powder-coated metal housing (RAL 9005)

Pris 3.749,00 kr.

På fjernlager

19´´ modul m/3 blæsere - DPVEN-03
search

19´´ modul m/3 blæsere -...

482 mm ventilation module (19''), 1 RS, with 3 fans

  • For installation into 482 mm racks
  • External temperature control with 1.2 m connection cable, adjustable range: 0-60 °C
  • Illuminated on/off switch
  • Black powder-coated metal housing (RAL 9005)

Pris 3.179,00 kr.

På fjernlager

Kabelordner - RWM-2D ORG.MAKERS BRAND
search

Kabelordner - RWM-2D

Rack-mount cable ducts, for horizontal cable management in 482 mm (19") racks, e.g. RACK-42NV, RACK-33NV, RACK-21NV, RACK-15NV.
  • Metal rack panel, black powder-coated (standard RAL 9005)
  • Panels with oval apertures for cable routing from the front to the back
  • Black plastic cable duct with vertical apertures for cable diameters up to 8 mm
RWM-1D: 1 RS, 482 x 44 x 70 mm
RWM-2D: 2 RS, 482 x 88 x 70 mm
Pris 429,00 kr.

På fjernlager

Kabelordner - RWM-1D ORG.MAKERS BRAND
search

Kabelordner - RWM-1D

Rack-mount cable ducts, for horizontal cable management in 482 mm (19") racks, e.g. RACK-42NV, RACK-33NV, RACK-21NV, RACK-15NV.
  • Metal rack panel, black powder-coated (standard RAL 9005)
  • Panels with oval apertures for cable routing from the front to the back
  • Black plastic cable duct with vertical apertures for cable diameters up to 8 mm
RWM-1D: 1 RS, 482 x 44 x 70 mm
RWM-2D: 2 RS, 482 x 88 x 70 mm
Pris 299,00 kr.

På fjernlager

Monteringsskinne - RTW-400 ORG.MAKERS BRAND
search

Monteringsskinne - RTW-400

Pair of mounting rails, for rack installation of devices incapable of being installed into a rack (e.g. hi-fi components), suitable for RACK-42NV, RACK-33NV, RACK-21NV or RACK-15NV.
  • Black powder-coated steel version
  • Mounting depth: 342 mm
  • Mounting height: 88 mm (2 RS)
  • Support area: 80 mm
  • Max. load: 50 kg
 
Supplied w/o devices.
Pris 399,00 kr.

På fjernlager

Kabeltromle - MCR-10 ORG.MAKERS BRAND
search

Kabeltromle - MCR-10

Kabeltromle, med 10 m ledning.
  • Lukket plastikhus
  • 4 sokler m/jord
  • Beskyttet mod overophedning
  • Indikator for overophedning og overbelastning
  • Kabelspecifikation: H05VV-F3G x 1,5 mm2
  • Mål: 225 x 270 x 75 mm
  • Vægt: 1,5 kg

 

Pris 0,00 kr.

På fjernlager

Kabeltromle - MCR-1 ORG.MAKERS BRAND
search

Kabeltromle - MCR-1

Kabeltromle, til kabellængde på op til 100 m.
  • Stålrørsstel med ergonomisk plastikhåndtag
  • Plastiktromle Ø 290 mm med låseanordning
  • Mål: 290 x 365 x 190 mm
  • Vægt: 1,1 kg
 
Leveres uden kabel

Den maksimale kabellængde henviser til standard mikrofonkabler.

 

Pris 299,00 kr.

På fjernlager

Mikrofonholder - KM-85070 K_NIG / MEYER
search

KM Mikrofonholder - KM-85070

Microphone holder, Ø 34-40 mm, made of elastic plastic.
  • Particularly suitable for wireless hand-held microphones with bigger handle
  • Thread: 16 mm ( 5/8 ") and 9 mm ( 3/8 ")
Pris 68,00 kr.

På fjernlager

Mikrofonstativ - KM-26085 K_NIG / MEYER
search

KM Mikrofonstativ - KM-26085

Microphone floor stand with one-hand height adjustment, mat black lacquered, with shock-absorbing black diecast base (Ø 25 cm).
  • Handle with soft-touch coating
  • Thread: 9 mm ( 3/8 ")
  • Adjustable height: 106-179 cm
  • Weight: 3.68 kg
Pris 769,00 kr.

På fjernlager

Mikrofonstativ - KM-259 K_NIG / MEYER
search

KM Mikrofonstativ - KM-259

Half-height microphone floor stand, with movable boom of adjustable length and shock-absorbing folding feet. Thread: 9 mm ( 3/8 ").
  • Mat black lacquered
  • Adjustable boom length: 47-77 cm
  • Adjustable height: 43-64 cm
  • Weight: 2.05 kg
Pris 939,00 kr.

På fjernlager

Mikrofonstativ - KM-210/9 K_NIG / MEYER
search

KM Mikrofonstativ - KM-210/9

Microphone floor stand, with movable boom of adjustable length and shock-absorbing folding feet. Thread: 9 mm ( 3/8 ").
  • Mat black lacquered
  • Adjustable boom length: 46-77 cm
  • Adjustable height: 90-160 cm
  • Weight: 3.2 kg
Pris 749,00 kr.

På fjernlager

Mikrofonholder - KM-85035 K_NIG / MEYER
search

KM Mikrofonholder - KM-85035

Microphone holder, Ø 17-22 mm, made of elastic plastic.
  • Particularly suitable for wireless hand-held microphones with slim handle
  • Thread: 16 mm ( 5/8 ") and 9 mm ( 3/8 ")
Pris 58,00 kr.

På fjernlager

Hørebeskyttelse 200 sæt - SPARKPLUG-200 ORG.MAKERS BRAND
search

Hørebeskyttelse 200 sæt -...

Dispenser med 200 ørepropper, fx til større arrangementer og virksomheder med højt støjniveau.

  • Medium dæmpning: 35 dB
  • Opfylder EN 352
  • 200 sæt farvede ørepropper, hvert par er hygiejnisk emballeret i gennemsigtig pose
  • Ørepropper af superblødt, hudvenligt polyuretanskum, konisk form
  • Karton med dispenserskuffe

 

Pris 519,00 kr.

På fjernlager

Tilt adapter - KM-19674 K_NIG / MEYER
search

KM Tilt adapter - KM-19674

Push-on tilting adapter for speaker stands, with patented expanding mandrel to ensure a secure and low-resonance connection between the adapter and PA speaker system via movable plastic splints.
  • Black lacquered steel version
  • Adjustable tilting angle: 0-15°, to be secured with locking screw
  • Suitable for stands and speaker stand inserts with a standard diameter
  • Max. load: 25 kg
  • For optimising the sound alignment of raised speaker systems
Pris 749,00 kr.

På fjernlager

Vægbeslag - KM-24471 K_NIG / MEYER
search

KM Vægbeslag - KM-24471

Wall bracket for speaker systems
  • Black lacquered steel version
  • Pivoting (approx. 90°) and tilting (approx. 30°)
  • Load capacity: 15 kg
  • Weight: 870 g
  • Type approved by TÜV (Technical Inspection Authority, Germany)
  • Matching adapter plate KM-24352 is available at option
Pris 719,00 kr.

På fjernlager

Højttalerstativ - KM-26735 K_NIG / MEYER
search

KM Højttalerstativ - KM-26735

Speaker stand, with flat diecast base (Ø 450 mm).
  • Decorative and space-saving design
  • Robust steel version, mat black lacquered
  • Height adjustable in 4 steps (110-178 cm), with locking pin, additionally secured via locking screw
  • 35 mm spigot
  • Max. load/central weight concentration: 20 kg
  • Weight: 10 kg
Pris 1.399,00 kr.

På fjernlager

Monteringsplade - KM-24116 K_NIG / MEYER
search

KM Monteringsplade - KM-24116

Mounting plate, with M20 inside thread.
  • Matching the spacer tube KM-21367 with M20 threaded bolts
  • Diecast zinc
  • Ø 105 mm
  • Weight: 240 g
Pris 152,00 kr.

På fjernlager

Mellemstykke variabel - KM-21367 K_NIG / MEYER
search

KM Mellemstykke variabel -...

Spacer tube, with patented expanding mandrels 'ring lock' for a secure and low-resonance connection via plastic expanding jaws at the top and M20 threaded bolt at the bottom.
  • For stand inserts with standard diameter
  • Mounting plate with M20 inside thread KM-24116 is available at option
  • Black lacquered steel tube version
  • Height adjustable in 3 steps (98-137 cm), with locking screw
  • Weight: 2.56 kg
Pris 889,00 kr.

På fjernlager

Vægbeslag - KM-24120 K_NIG / MEYER
search

KM Vægbeslag - KM-24120

Wall bracket for PA speaker systems, with patented expanding mandrel for a secure and low-resonance connection between wall bracket and PA speaker system via movable plastic splints.
  • Black lacquered steel version
  • Pivoting (approx. 180°) and tilting (approx. 22°), tilting angle adjustable in 11 steps
  • Distance between mandrel and mounting plate: 420 mm
  • Load capacity: 50 kg
  • Weight: 6.2 kg
  • GS approved
  • Supplied in individual parts, instructions for assemby are included
Safety Note
To be installed by experts only! Pay attention to precise screw connection! Please use suitable safety ropes!
Pris 2.159,00 kr.

På fjernlager

Vægbeslag - KM-24110 K_NIG / MEYER
search

KM Vægbeslag - KM-24110

Wall bracket for PA speaker systems, with patented expanding mandrel for a secure and low-resonance connection between wall bracket and PA speaker system via movable plastic splints.
  • Black lacquered special square steel tube design
  • Tiltable (approx. 22°), tilting angle adjustable in 11 steps
  • Distance between mandrel and wall-mounted square profile tube: 420 mm
  • Load capacity: 50 kg 
  • Weight: 2.7 kg
  • GS approved
  • Supplied in individual parts, instructions for assemby are included
Safety Note
To be installed by experts only! Pay attention to precise screw connection! Please use suitable safety ropes!
Pris 849,00 kr.

På fjernlager

Højttalerstativ - KM-214/6 K_NIG / MEYER
search

KM Højttalerstativ - KM-214/6

Speaker stand
  • Lightweight aluminium version, mat black lacquered
  • Height adjustable in 5 steps (137-218 cm), with locking pin, additionally secured via locking screw
  • 35 mm spigot
  • Max. load/central weight concentration: 50 kg
  • Weight: 4.3 kg
  • Type approved by TÜV (Technical Inspection Authority, Germany)
Pris 1.429,00 kr.

På fjernlager

Højttalerstativ - KM-21435 K_NIG / MEYER
search

KM Højttalerstativ - KM-21435

Speaker stand
  • Robust steel version, mat black lacquered
  • Height adjustable in 5 steps (132-202 cm), user-friendly locking due to push-button system, additionally secured via locking screw
  • 35 mm spigot
  • Max. load/central weight concentration: 50 kg
  • Weight: 5.5 kg
  • Type approved by TÜV (Technical Inspection Authority, Germany)
Pris 909,00 kr.

På fjernlager

Højttalerstativ - KM-21302 K_NIG / MEYER
search

KM Højttalerstativ - KM-21302

Telescopic speaker stand
  • Robust steel version, mat black lacquered
  • Crank handle with push-button for unlocking and locking screw
  • Adjustable height: 138-218 cm
  • 35 mm spigot with integrated M10 threaded bushing
  • Max. load/central weight concentration: 40 kg
  • Weight: 7.5 kg
  • Type approved by TÜV (Technical Inspection Authority, Germany)
Pris 2.169,00 kr.

På fjernlager