19" Rack Panel for 3 Axial...
- Rack panel 3 U high for mounting of 3 standard axial fans
- For 3 fans
På lager
.
Filtrer efter
Status
Selections
Mærker
Pris
9,00 kr. - 14.729,00 kr.
Der er 769 varer.
På lager
U-shaped rack panel with brush strip to pass through connectors and cables
På lager
På lager
87403 ERGO
The ERGO is a very affordable rackmount drawer with heavy-duty 1.5 mm steel construction and easy, ergonomic operation. It integrates a recessed pull handle that runs the width of the drawer and a convenient push-to-close, pull-to-open latching mechanism with 1,5 kg pull force. This economy rack drawer has a black semi-gloss powder coating finish and 20 kg load capacity. It features smooth-running full extension ball bearing slides with front disconnect for easy drawer removal.
På lager
87402 ECONOMYOrganization is half the rack!
Our 19" drawers offer the ideal solution for safe storage and organization of the accessories you need when working. Specially designed for use in 19" racks and maximize the efficiency of your rack system.
Our "Economy" version of the standard 19" drawer from Adam Hall® with 2/3 extension, on ball bearing slide-in rails.
På lager
1 U rack panel with punched holes for 16 universal _D_ type XLR sockets.
På lager
U-shaped Ventilation Rack Panel - horizontal slots
På lager
Strap handle with Steel insert
På lager
Recessed extendable handle - three section: 39/22/25 cm
På lager
19" Rackmount pull-out tray 1 U. Drawer with slides mounted on both sides with.The rack brackets on the front and back are extendable, allowing the unit to be fitted with rear support to racks of varying depths.
På lager
87402 ALU ERGO
If you want to keep your rack tidy by storing accessories and cables conveniently and safely, ERGO has a sturdy rack drawer for tough everyday travel. The 1.5 mm aluminium rack drawer runs smoothly on ball bearing mounted telescopic rails and can be fully pulled out or completely removed.
The recessed handle lets you push and pull the drawer, and the drawer locks securely into place when closed.
På lager
Steel Bar Handle, mounted in recessed plastic dish for top edge mounting with 12mm Radius.
På lager
37041
The main features of this swivel castor are high stability, low height and excellent steering abilitie. This heavy duty ball bearing castor has a low noise level and is abrasion- proof.
This castor is mounted on a 10 mm deep, galvanized steel fitting. The overall height after mounting is thus only 41 mm.
På lager
Powerful and biodegradable citrus solvent cleaner for degreasing and removing adhesive residues.
Usable on most surfaces and substrates, such as painted and coated surfaces, glass, porcelain, and concrete, and compatible with vinyl and many plastics. It is also ideal for cleaning nozzles and spray glue guns.
Note: Not suitable for preparing surfaces for adhesives or painting!
På lager
På lager
3780Fixed Castor 50 mm
På lager
If you want to install devices in the rack that do not correspond to the standard 19" dimensions, here is the right tray for you. The universal hole pattern is suitable for mounting many different devices.
På lager
På lager
Medium duty Butt hinge
På lager
The simple and fast adhesive from the spray can for bonding large areas.It bonds many materials to and with each other. Specially developed for permanent bonding of rough and uneven surfaces such as paper, cardboard, felt, fabric, plasticiser- free plastic films, foams, upholstery wadding, for bonding hard foams as well as on wood, glass, metal, ceramics (ideal for case and box makers).
A special valve allows the spray jet to be individually adjusted to the required application. Depending on the material, up to 4 m² of material can be glued per can. The spray adhesive is temperature resistant from -20°C to +75°C.
Please also note our safety data sheet in the download area.
På lager
4906 S M4AH
The popular rubber foot classic 4906 now also with a special feature.In its adapted version, it is particularly effective for applications where a secure footing is important. With its softer material and slightly embossed surface, it offers a better grip than standard feet.
Material contains plasticisers. Therefore, please check the compatibility of the surface before use.
På lager
Heavy duty rack strip with three holes per U
På lager
19" Rack Tray extra deep for mounting non standard equipment with a depth of up to 375 mm
På lager
Carpet covering - heavy duty
Price per running meter!
På lager
På lager
På lager
Gas spring 300 Newton including mounting material
På fjernlager
På fjernlager
Lightweight material with high stability for your special casebuilding ideas - SolidLite®, the latest innovation from Adam Hall.
På fjernlager
Lightweight material with high stability for your special casebuilding ideas - SolidLite®, the latest innovation from Adam Hall.
På fjernlager
The EasyCase System of aluminium extrusions and interlocking plastic corners allow fast assembly of cases without the need for rivets.
Corners, extrusions and 7mm wood or plastic materials can be easily glued together or tacked, using a compressed air Tacker and 6mm double prong tacks.
EasyCase Aluminium Extrusions for 7mm material are available in mill finish or anodised (A) and EasyCase plastic corners are available in black and three shades of grey.
Slight color variations between different batches possible.
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.