. Køb AdamHall hos CC ProShop (4) .
Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

AdamHall

AdamHall

Aktive filtre

  • Status: Disponibel
  • Mærker: Adam Hall Hardware
  • Mærker: Cameo
  • Mærker: LD Systems
  • Mærker: NEUTRIK
LD Systems Padded protective cover for MON 8 A G3
search

LD Systems Padded...

MON 8 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 8 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 559,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 15 A G3
search

LD Systems Padded...

MON 15 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 15 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 749,00 kr.

På fjernlager

LD Systems Padded protective cover for MON 12 A G3
search

LD Systems Padded...

MON 12 G3 PC

With the padded protective cover made of durable and water-repellent 1680D nylon, the MON 12 A G3 monitor is optimally protected against weather influences and other impacts. The 8 mm thickly padded protective cover can be easily slipped over the monitor standing on its side due to the large side zipper opening. The crossing of the internal Velcro straps ensures a secure fit in the protective cover.

The large roll-up front opening and side flaps allow full use of the monitor with the protective cover in place. The cutouts for handles, control panel, connections, speaker stand flange, and heat sink each have their own flap. These flaps are closed with a zipper and can be kept open using Velcro to optimally protect the monitor while still allowing it to be operated.

Pris 649,00 kr.

På fjernlager

LD Systems Ring Screw Stainless Steel M8 x 30 mm Incl. Washer
search

LD Systems Ring Screw...

5430 M8

Polished stainless steel screw with fitting washer for multi-purpose use such as for hanging speaker systems or attaching safety ropes. Also suitable for full-range loudspeakers from the LD Systems Series.

Pris 49,00 kr.

På fjernlager

Screw M8 x 16 with Gear Rim
search

Screw M8 x 16 with Gear...

54M8X16

Galvanized screw with integrated gear rim and washer for easy mounting of substructure rollers.

Pris 169,00 kr.

På fjernlager

Screw M8 x 20 with Gear Rim
search

Screw M8 x 20 with Gear...

54M8X20

Galvanized screw with integrated gear rim and washer for easy mounting of substructure rollers.

Pris 179,00 kr.

På fjernlager

Faux leather "Cayman" - embossed
search

Faux leather "Cayman" -...

0155

Thanks to its properties, embossed Cayman imitation leather is ideal for use as a covering material in loudspeaker construction. Cayman impresses with its fine appearance and appealing quality. Its fabric backing enables a firm and durable bonding.

Pris 159,00 kr.

På fjernlager

Swivel Castor 100 mm with blue Wheel
  • På tilbud!
  • -30,00 kr.
search

Swivel Castor 100 mm with...

372151Swivel Castor

  • double ball race swivel
  • 2 mm steel frame
  • distance of mounting holes: 60 x 80 mm
Pris 99,00 kr. Normalpris 129,00 kr.

På fjernlager

Swivel Castor 100 mm with blue Wheel and Brake
  • På tilbud!
  • -30,00 kr.
search

Swivel Castor 100 mm with...

372191Swivel Castor

  • double ball race swivel
  • 2 mm steel frame
  • distance of mounting holes: 60 x 80 mm
Pris 159,00 kr. Normalpris 189,00 kr.

På fjernlager

Ergonomic installation "Evolution" handle in set (2 pieces)".
search

Ergonomic installation...

EVOLUTIVE HANDLE

Handle consisting of a black plastic dish and a sturdy ring handle made of black powder-coated die-cast zinc. By virtue of the two additional handholds, extremely ergonomic and especially suitable for carrying larger speakers in front of the body.

Pris 429,00 kr.

På fjernlager

Insert Handle plastic black
search

Insert Handle plastic black

3403

Insert handle - in two parts

  • Can be used to lift a box from all four directions
  • With holes for water drain.
Pris 119,00 kr.

På fjernlager

Flying Plate
search

Flying Plate, Aluminium...

5725 B

Lashing point in black anodised aluminium. Specially designed for subsequent mounting on a speaker cabinet, for example. The flexibly mountable panel has a direct tensile load-bearing capacity of up to 500 daN.

Pris 89,00 kr.

På fjernlager

D-Ring black
search

D-Ring black

5710
  • Roping eye with no moving parts
  • No rattle or hum at low frequencies
  • Easily rotated through 90 degrees to suit suspension orientation
  • 2 mm steel with Ø 7 mm dia. pin.
Pris 59,00 kr.

På fjernlager

D-Ring
search

D-Ring

5801

Roping eye/snap-back spring shackle

Pris 129,00 kr.

På fjernlager

LD Systems Padded Bag for FX300
search

LD Systems Padded Bag for...

FX 300 BAG

As the proud owner of an FX 300 effects pedal, you want it to last for as long as possible. The matching padded bag will protect it from getting scratched during the day-to-day touring use.

This bag does so much more though: its water-resistant 1680D nylon protects your FX 300 from splashing water during transport, and there is an extra compartment for the power supply unit so that you always have it by your side and neatly tucked away.

You can also easily carry cables or other accessories in the large inside pocket. Have fun and enjoy using the FX 300 for a long time!

Pris 249,00 kr.

På fjernlager

LD Systems Power Supply for FX 300
search

LD Systems Power Supply for...

FX 300 PS

To make sure you always have the right and necessary power for your FX 300, we highly recommend its suitable power supply - FX 300 PS.

It runs center-negative at 9V DC / 500 mA and features a common 2.1 mm plug with negative tip and positive shaft.

Pris 169,00 kr.

På fjernlager

Back to Back Hook and Loop Fastener 16 mm
search

Back to Back Hook and Loop...

5815

Back-to-Back tape, one side hooks, other side loops.

  • Good solution to manufacture strong and custom made cable ties, also to be used for many purposes in speaker cabinet and case building.
Pris 259,00 kr.

På fjernlager

Back to Back Hook and Loop Fastener 20 mm
search

Back to Back Hook and Loop...

5816

Back-to-Back tape, one side hooks, other side loops.

  • Good solution to manufacture strong and custom made cable ties, also to be used for many purposes in speaker cabinet and case building.
Pris 279,00 kr.

På fjernlager

Back to Back Hook and Loop Fastener 30 mm
search

Back to Back Hook and Loop...

5817

Back-to-Back tape, one side hooks, other side loops.

  • Good solution to manufacture strong and custom made cable ties, also to be used for many purposes in speaker cabinet and case building.
Pris 399,00 kr.

På fjernlager

Neutrik Cat.6a Feed-through-coupling RJ-45 etherCON®
search

Neutrik Cat.6a...

NE8FFX6-WCompact adapter for etherCON® RJ-45 connectors

For extending network cables, you need an adapter or straight-through-coupling. As this adapter is of course also a component of the set-up, you should use a plug for Cat.6a connections that can also pass on this bandwidth.

We now offer the Cat.6a coupling from Neutrik® for this purpose. Very light, very small and compact. Perfect fit for any adapter case.

Pris 649,00 kr.

På fjernlager

Neutrik etherCON RJ45 Feedthrough Coupler for Cable Extensions
search

Neutrik etherCON RJ45...

NE8FF

etherCON RJ45 feedthrough coupler for cable extensions

  • Accommodates NE8MC* or any standard RJ45 plug
  • The adapter offers the approved latch lock system
  • The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applications
Pris 259,00 kr.

På fjernlager

Neutrik Adapter PowerCon to powerCON
search

Neutrik Adapter PowerCon to...

NAC3MM-1

powerCON NAC3MPA-1 (power in) - powerCON NAC3MPB-1 (power out), coupler for linking cables

The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!

Pris 279,00 kr.

På fjernlager

Neutrik Colour Code Ring black - 100 stk.
search

Neutrik Colour Code Ring...

XCR-0

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Colour Code Ring orange - 100 stk.
search

Neutrik Colour Code Ring...

XCR-3

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Colour Code Ring white - 100 stk.
search

Neutrik Colour Code Ring...

XCR-9

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Colour Code Ring violet - 100 stk.
search

Neutrik Colour Code Ring...

XCR-7

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Colour Code Ring grey - 100 stk.
search

Neutrik Colour Code Ring...

XCR-8

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Rubber sealing cap g-type for Neutrik powerCON® NAC3FPX*
search

Neutrik Rubber sealing cap...

SCNAC-03

The G-shaped rubber sealing cap protects the powerCON TRUE1 TOP built-in connectors NAC3FPX* from dust and water in accordance with protection class IP65. User-friendly and easy to install, the compact frame enables a high packing density on the housing.

Pris 29,00 kr.

På fjernlager

Neutrik Rubber sealing cap for Neutrik powerCON® NAC3PX-TOP
search

Neutrik Rubber sealing cap...

SCNAC-04

The SCNAC-04 rubber sealing caps with two caps (power-in / power-out) protect the powerCON TRUE1 TOP built-in connectors NAC3PX-TOP against dust and water in accordance with protection class IP65. The compact frame is user-friendly, easy to install and enables a high packing density on the housing.

Pris 39,00 kr.

På fjernlager

Tilbage til toppen

Mest solgte

AFMONTERINGSNØGLER BLAUPUNKT 2 STK.
search

AFMONTERINGSNØGLER...

Vægt (Emb.) 60g
Rumfang (Emb.) 0.00074025
Bredde (Emb.) 94mm
Længde (Emb.) 225mm
Højde (Emb.) 35mm
Pris 19,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.