. Køb AdamHall hos CC ProShop (2) .
Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

AdamHall

AdamHall

Aktive filtre

  • Mærker: Adam Hall 19" Parts
  • Mærker: Gravity
  • Mærker: NEUTRIK
Neutrik Adapter Speakon 2/4-pole to Speakon 2/4-pole
search

Neutrik Adapter Speakon...

NL4MMX

Lockable 4 pole speakON adapter

Links two NL2/4F*s together for cable extension. Changes gender to male when permanently locked on the cable.

Features permanent secure connection on a speakON cable connector using 2nd lock. Can be permanently attached to NL2/4F*.

Pris 89,00 kr.

På lager

19" Rack Tray 2U | 375 mm depth
search

19" Rack Tray 2U - 375 mm...

87552

19" Rack Tray extra deep for mounting non standard equipment with a depth of up to 375 mm

  • Rear edge is folded up 10 mm for extra stability
  • Internal width: 435mm
  • Ventilation slots in sides
Pris 309,00 kr.

På lager

Neutrik Dummy Plug for XLR Chassis Connectors
search

Neutrik Dummy Plug for XLR...

NDF

The dummyPLUG NDF for Neutrik female XLR receptacles enable you to simplify cabling. Unused inputs can be covered to avoid miss wiring and protect against dust additionally.

Pris 19,00 kr.

På lager

Neutrik 8-pole speakON to 8-pole speakON adapter
search

Neutrik 8-pole speakON to...

NL8MMXX

To extend a speakON cable, you need a straight-through adapter, as the two ends of the cable always consist of female connectors and it is not possible to plug them together as with XLR cables, for example. For this purpose, you can get the NL8MMXX from Neutrik (R), for example. The adapter is made of sturdy die-cast zinc and comes with two male sockets and is only suitable for 8-pole speakON. This adapter is also available for the 4-pole version.

Pris 279,00 kr.

På fjernlager

Gravity Square Steel Base Prepared for Off-Centre Weight Attachment
  • På tilbud!
  • -210,00 kr.
search

Gravity Square Steel Base...

WB 431 B

This large heavy steel base for M20 poles provides a firm footing and three female threads that allow you to mount extra weights off centre. Two integrated handles facilitate transport while felt- covered feet prevent scratches and marks on the floor.

Pris 999,00 kr. Normalpris 1.209,00 kr.

På fjernlager

Gravity Holding Clip for VARI®-G Guitar Stands
  • På tilbud!
  • -14,00 kr.
search

Gravity Holding Clip for...

XSP 1057

Additional clip to expand the Gravity VARI®-G guitar stand series

Pris 25,00 kr. Normalpris 39,00 kr.

På fjernlager

Gravity Weight Plate For Round Speaker Pole Base Art. Nr. GWB123B
  • På tilbud!
  • -60,00 kr.
search

Gravity Weight Plate For...

WB 123 WPB

Adding 5 kg extra weight for increased stability this cast iron plate installs to our speaker pole base part no. GWB123B without the need for tools.

Pris 299,00 kr. Normalpris 359,00 kr.

På fjernlager

Gravity Versatile Swivel Arm with Central Locking Mechanism - 1/4" Medium
search

Gravity Versatile Swivel...

MA VARIARM M 14

In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.

With the VARI®-ARM M 14, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from an action cam to a mobile recorder - almost anywhere and in any direction in a matter of seconds.

The VARI®-ARM M 14 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position. Its main feature: Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM M 14 is held tight and safe.

Both ends of the VARI®-ARM M 14 have 1/4" threads on which you can attach almost any camera, handheld recorder or smartphone holder on the market. You can then screw the VARI®-ARM to a Super Clamp with a 1/4" mount and fix your equipment to a truss in the studio or on stage.

As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM M 14's usability.

Pris 349,00 kr.

På fjernlager

Gravity Versatile Swivel Arm with Central Locking Mechanism - 1/4" TV16 Large
search

Gravity Versatile Swivel...

MA VARIARM L TV

In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.

With the VARI®-ARM L TV, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from microphone clamps to super clamps and lighting equipment - almost anywhere and in any direction in a matter of seconds.

The VARI®-ARM L TV is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position. Its main feature: Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM L TV is held tight and safe.

Perfect for truss mounting

Both ends of the VARI®-ARM L TV have a 16 mm TV spigot for attaching the VARI®-ARM to a Super Clamp. You can unscrew the two TV16 spigots. This frees up a 1/4" thread to which you can attach a microphone clamp, pop filter and more.

As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM L TV's usability.

Pris 389,00 kr.

På fjernlager

Gravity Versatile Swivel Arm with Central Locking Mechanism - 3/8" Medium
search

Gravity Versatile Swivel...

MA VARIARM M 38

In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.

With the VARI®-ARM M 38, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from a microphone clamp to a tablet or an action cam - almost anywhere and in any direction in a matter of seconds.

The VARI®-ARM M 38 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position. Its main feature: Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM M 38 is held tight and safe. Thanks to the 3-kilogram load capacity, you can even mount a DSLM camera including a standard lens or a heavyweight microphone such as the broadcast classic RE-20.

There is a 3/8" thread at the head of the VARI®-ARM for you to screw on a microphone clip, a pop filter and more. The included adapter (3/8" to 1/4" reduction thread) gives you complete flexibility, allowing you to use almost any camera, handheld recorder or smartphone mount on the market with the VARI®- ARM M 38. Thanks to the solid clamp at the bottom of the VARI®-ARM and its large clamping range from 15 to 35 mm, the VARI®-ARM can also be easily attached to most tables and poles (e.g. to tripods). The clamp can also be unscrewed to reveal a 3/8" thread for mounting the VARI®-ARM onto other equipment.

As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM M 38's usability.

Pris 389,00 kr.

På fjernlager

Gravity Versatile Swivel Arm with Central Locking Mechanism -  3/8" Large
search

Gravity Versatile Swivel...

MA VARIARM L 38

In the past, if you wanted to produce music, videos or other content professionally, you had to go to specialised studios. Today, podcasts and YouTube videos for millions of followers and even international hit albums are recorded either at home or spontaneously on the road. It doesn't take much anymore. However, it is crucial that the remaining equipment is as flexible and well thought-out as possible.

With the VARI®-ARM L 38, Gravity® has created such an universal tool that allows you to use a wide variety of equipment - from a microphone clamp to a tablet or an action cam - almost anywhere and in any direction in a matter of seconds.

The VARI®-ARM L 38 is an innovative mounting arm with three joints that allow you to move your equipment freely and precisely into any desired position.

Its main feature:Only one adjusting screw is needed to lock and unlock all three joints. As soon as you have found your desired position, you tighten the locking screw and the position of the VARI®-ARM L 38 is held tight and safe. The included adapter (3/8" to 1/4" reduction thread) gives you complete flexibility, allowing you to use almost any camera, handheld recorder or smartphone mount on the market with the VARI®- ARM L 38.

Thanks to the solid clamp at the bottom of the VARI®-ARM and its large clamping range from 15 to 35 mm, the VARI®-ARM can also be easily attached to most tables and poles (e.g. to tripods). The clamp can also be unscrewed to reveal a 3/8" thread for mounting the VARI®-ARM onto other equipment.

As a universal tool for your creative purposes, there are hardly any limits to the VARI®-ARM L 38's usability.

Pris 469,00 kr.

På fjernlager

Gravity Mounting/ Rack Bracket for Gravity® DJ Desk
  • På tilbud!
  • -30,00 kr.
search

Gravity Mounting/ Rack...

XSP 10130

Small helpers - big impact. With the XSP 10130 rack brackets, you can use your Gravity® DJ Desk in an even more versatile and comfortable way. Whether you want to add 19'' equipment to your studio centre, attach a rack drawer for accessories or simply place a power strip firmly and securely within reach, the Gravity® rack brackets offer a multitude of possible applications.

The robust brackets are made of powder-coated steel and are quickly and easily mounted to the rear rail of the FDJ T 01 DJ table via locking screws. As they are two individual brackets, you can adjust the width and positioning as required. The mounting is done via the integrated cage nuts.

Pris 199,00 kr. Normalpris 229,00 kr.

På fjernlager

Gravity Absorber pucks for loudspeakers ( 4 pcs.)
  • På tilbud!
  • -40,00 kr.
search

Gravity Absorber pucks for...

SA SM IF 01

Those who do not place their studio monitors on a table surface, but use dedicated stands and mounts for monitoring in their own studio, are already doing a lot of things correct. Nevertheless, studio monitors also generate oscillations and vibrations here, which are transferred to the supporting surface and can thus impair the stereo image of the speakers. Usually, the larger the surface, the more energy transfer takes place. With the SA SM IF 01 absorber pucks, Gravity has a solution ready that can have a big impact with small means.

The Gravity Absorber pucks can be placed freely under a loudspeaker (e.g. studio monitor) and achieve a decoupling of the loudspeaker cabinet and the installation surface due to their silica gel surface. This significantly reduces vibrations and oscillations and makes the stereo image more precise by reducing acoustic smearing and discolouration.

The load capacity is 36 kg when using four Gravity SASMIF01 absorber pucks, which means that most speakers on the market can be used without any problems.

Pris 199,00 kr. Normalpris 239,00 kr.

På fjernlager

Gravity DJ Desk
search

Gravity DJ Desk

F T 01

Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ Desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes.

The DJ Desk offers enough space to place two decks and a mixing console or your DJ controller. Your performance setup with samplers, sequencers and synthesizers will also find enough room thanks to a surface depth of 50 cm and a width of 119 cm.

In case you need additional space, simply expand the Gravity® DJ Desk with an optionally available laptop holder or two studio monitor holders. The rear rail also offers further flexible expansion options that are tailored to your individual needs as a DJ, producer or instrumentalist.

You will have no trouble adapting the desk to your individual height. It can be set between 68 cm and 109 cm

More stability is provided by the adjustable levelling feet, which compensate for any unevenness of the floor, and the mountable cross bar, which significantly strengthens the table.

Pris 2.509,00 kr.

På fjernlager

Gravity DJ Desk with Adjustable Loudspeaker and Laptop Trays
search

Gravity DJ Desk with...

FDJT 01

Creativity has no limits, but workspace certainly does. A place where you can unfold without limits is the Gravity® FDJT 01 DJ desk. On it you keep your set-up compact and always ready for the moment when inspiration strikes.

Your trusty monitors can be placed on the height-adjustable, 360° rotatable and 15° tiltable trays. The precise positioning and inclination of your loudspeakers is made much easier for you by a precise scale on the tubes.

Your laptop is enthroned at the heart of your set-up in the middle of the table, held firmly in place by the integrated pins so that even if tilted extremely, it is always secure. Both loudspeaker and laptop trays can be adjusted precisely along the rear rail of the Gravity® FDJT 01 DJ Desk by shifting them to the left or right.

You will have no trouble adapting the desk to your individual height. It can be set between 680 mm and 1090 mm and offers you plenty of space for your equipment - with a usable depth of 500 mm and a width of 1190 mm.

More stability is provided by the adjustable levelling feet, which compensate for any unevenness of the floor, and the mountable cross bar, which significantly strengthens the table.

Pris 2.809,00 kr.

På fjernlager

Gravity Guitar Footrest
search

Gravity Guitar Footrest

GS FB 01

Designed to support the proper posture for playing classical guitar, this Gravity footrest offers 6 adjustable height levels from 18 to 255 mm to perfectly adapt to any player. The rubber tipped feet are angled outwards to increase stability and prevent tipping over, and the extra wide construction with non-slip rubber pad provides a secure grip of any foot.

Pris 129,00 kr.

På fjernlager

Gravity Robust work gloves size L
  • På tilbud!
  • -20,00 kr.
search

Gravity Robust work gloves...

XW GLOVE L

Everything today is done digitally: lights, audio and video operate on networks and can be controlled from everywhere and at any time using touchscreens. Hybrid events even sometimes take audiences into the virtual world. Yet no stage in the world can be put up at the touch of a button. The heavy lifting still needs to be done manually. Speakers, spotlights, mixing consoles and many other things still have to be pre-loaded into cases and trucks by hand. And that's why Gravity developed the XW GLOVE working gloves to make the work of anyone who has to turn events into a physical reality: safer, efficient and more comfortable.

The XW GLOVE gloves feature two types of materials: the fingers and palm are made of durable goat leather and the back of the hand of elastic jersey. A good fit is ensured by the rubber band and the velcro fastener. Goat leather sets itself apart from other types of leather because it has no oily residues, helping it to remain soft and be more resilient and tear-resistant than other kinds of leather.

There is also an opening for the thumb and index finger on the XW GLOVE that allows digital applications to be accessed at any time, even when toiling away on the stage and in the warehouse. Apps and remote software on smartphones and tablets required for taking care of daily business in all fields can thus be used quickly and freely without always having to remove your gloves. Carrying out high-precision work by hand is also made easier at the same time: small parts can be grabbed, turned and pulled, tape can be ripped, etc.

The Gravity XW GLOVE gloves are available in black in sizes M, L and XL.

Pris 139,00 kr. Normalpris 159,00 kr.

På fjernlager

Gravity Robust work gloves size XL
  • På tilbud!
  • -20,00 kr.
search

Gravity Robust work gloves...

XW GLOVE XL

Everything today is done digitally: lights, audio and video operate on networks and can be controlled from everywhere and at any time using touchscreens. Hybrid events even sometimes take audiences into the virtual world. Yet no stage in the world can be put up at the touch of a button. The heavy lifting still needs to be done manually. Speakers, spotlights, mixing consoles and many other things still have to be pre-loaded into cases and trucks by hand. And that's why Gravity developed the XW GLOVE working gloves to make the work of anyone who has to turn events into a physical reality: safer, efficient and more comfortable.

The XW GLOVE gloves feature two types of materials: the fingers and palm are made of durable goat leather and the back of the hand of elastic jersey. A good fit is ensured by the rubber band and the velcro fastener. Goat leather sets itself apart from other types of leather because it has no oily residues, helping it to remain soft and be more resilient and tear-resistant than other kinds of leather.

There is also an opening for the thumb and index finger on the XW GLOVE that allows digital applications to be accessed at any time, even when toiling away on the stage and in the warehouse. Apps and remote software on smartphones and tablets required for taking care of daily business in all fields can thus be used quickly and freely without always having to remove your gloves. Carrying out high-precision work by hand is also made easier at the same time: small parts can be grabbed, turned and pulled, tape can be ripped, etc.

The Gravity XW GLOVE gloves are available in black in sizes M, L and XL.

Pris 139,00 kr. Normalpris 159,00 kr.

På fjernlager

Gravity Robust work gloves size M
  • På tilbud!
  • -20,00 kr.
search

Gravity Robust work gloves...

XW GLOVE M

Everything today is done digitally: lights, audio and video operate on networks and can be controlled from everywhere and at any time using touchscreens. Hybrid events even sometimes take audiences into the virtual world. Yet no stage in the world can be put up at the touch of a button. The heavy lifting still needs to be done manually. Speakers, spotlights, mixing consoles and many other things still have to be pre-loaded into cases and trucks by hand. And that's why Gravity developed the XW GLOVE working gloves to make the work of anyone who has to turn events into a physical reality: safer, efficient and more comfortable.

The XW GLOVE gloves feature two types of materials: the fingers and palm are made of durable goat leather and the back of the hand of elastic jersey. A good fit is ensured by the rubber band and the velcro fastener. Goat leather sets itself apart from other types of leather because it has no oily residues, helping it to remain soft and be more resilient and tear-resistant than other kinds of leather.

There is also an opening for the thumb and index finger on the XW GLOVE that allows digital applications to be accessed at any time, even when toiling away on the stage and in the warehouse. Apps and remote software on smartphones and tablets required for taking care of daily business in all fields can thus be used quickly and freely without always having to remove your gloves. Carrying out high-precision work by hand is also made easier at the same time: small parts can be grabbed, turned and pulled, tape can be ripped, etc.

The Gravity XW GLOVE gloves are available in black in sizes M, L and XL.

Pris 139,00 kr. Normalpris 159,00 kr.

På fjernlager

Gravity Rapid Desk extension for CART L 01 B
search

Gravity Rapid Desk...

CART L 01 B AC 1Turn your Gravity® CART into a mobile workspace!

With the Rapid Desk extension CART L 01 AC 1, you can transform your CART L 01 B together with the Rapid Desk (KS RD 1) into a stable, mobile work surface in no time at all.

The extension is made of powder-coated steel and - like all Gravity® stands - extremely stable and robust. In combination with the Rapid Desk (KS RD 1), a generous maximum load capacity of up to 50 kg is achieved on the top tier. On the lower tier, up to 120 kg can be transported.

For assembly, the screwed supports are simply inserted into the recesses in the middle of the Rapid Desk, the trolley is unfolded and extended to the now maximum possible dimension. No further fastening or screwing of the support is necessary.

Pris 139,00 kr.

På fjernlager

Gravity Multifunctional Trolley (Large)
  • På tilbud!
  • -150,00 kr.
search

Gravity Multifunctional...

CART L 01 BEasy work with heavy equipment

Sound technicians, DJs and stagehands: Take the weight off your load with a multi-functional cart. The Gravity Cart L 01 B chassis is made of steel to ensure stability. Two fixed and two rotating low-rolling resistance, anti-slip tyres provide extra maneuverability even for higher curbs or rough terrain.

The Gravity Cart is your trusty companion before and after every show. And the best thing: The light-weight, compact-folded, multi-functional cart lifts easily from the tour bus while also performing effortlessly when fully loaded with equipment. With its up to 1.35 m extendable chassis and 170 kg load capacity, your equipment is quickly and safely transported to and from the stage.

And thanks to its optimal ergonomic design: without straining your back.

Pris 1.899,00 kr. Normalpris 2.049,00 kr.

På fjernlager

Gravity Wagon Bag for CART M 01 B
search

Gravity Wagon Bag for CART...

BG CART M 1

The BG CART M1 wagon bag is a practical solution for carrying smaller items of equipment with the Gravity® CART M 01 B.

Made from robust, water-repellent 1680D nylon, it provides protection and stability for your equipment. The simple assembly allows for easy attachment to the handles of the Gravity® CART Medium. The adjustable straps allow the length of the bag to be adapted to the set length of the CART, so that the bag remains flexible and foldable even after assembly.

The Gravity® BG CART M1 wagon bag is robust, flexible and simply practical - an indispensable aid for transporting equipment.

Pris 239,00 kr.

På fjernlager

Gravity Multifunctional Trolley (Medium)
  • På tilbud!
  • -240,00 kr.
search

Gravity Multifunctional...

CART M 01 BMakes Light Work of Heavy Equipment

Sound technicians, DJs and stagehands: Take the weight off your load with a multi-functional cart. The Gravity Cart chassis is made of steel to ensure rigidity. Two fixed and two rotating low-rolling resistance, anti-slip rubber tyres provide extra manoeuvrability. The Gravity Cart is your trusty companion before and after every show. And the best thing is: The light-weight, compact-folded, multi-functional cart lifts easily from the tour bus while also performing effortlessly when fully loaded with equipment. With its (up to 1.09 m) extendable chassis and 150 kg load capacity, your equipment is quickly and safely transported to and from the stage. And thanks to its optimal ergonomic design: without straining your back.

Pris 799,00 kr. Normalpris 1.039,00 kr.

På fjernlager

Neutrik Cat.6a Feed-through-coupling RJ-45 etherCON®
search

Neutrik Cat.6a...

NE8FFX6-WCompact adapter for etherCON® RJ-45 connectors

For extending network cables, you need an adapter or straight-through-coupling. As this adapter is of course also a component of the set-up, you should use a plug for Cat.6a connections that can also pass on this bandwidth.

We now offer the Cat.6a coupling from Neutrik® for this purpose. Very light, very small and compact. Perfect fit for any adapter case.

Pris 649,00 kr.

På fjernlager

Neutrik etherCON RJ45 Feedthrough Coupler for Cable Extensions
search

Neutrik etherCON RJ45...

NE8FF

etherCON RJ45 feedthrough coupler for cable extensions

  • Accommodates NE8MC* or any standard RJ45 plug
  • The adapter offers the approved latch lock system
  • The D shape adapters are problem solvers for various intermating problems for professional and semi-professional applications
Pris 259,00 kr.

På fjernlager

Neutrik Adapter PowerCon to powerCON
search

Neutrik Adapter PowerCon to...

NAC3MM-1

powerCON NAC3MPA-1 (power in) - powerCON NAC3MPB-1 (power out), coupler for linking cables

The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!

Pris 279,00 kr.

På fjernlager

Neutrik Colour Code Ring black - 100 stk.
search

Neutrik Colour Code Ring...

XCR-0

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Colour Code Ring orange - 100 stk.
search

Neutrik Colour Code Ring...

XCR-3

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Colour Code Ring white - 100 stk.
search

Neutrik Colour Code Ring...

XCR-9

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Colour Code Ring violet - 100 stk.
search

Neutrik Colour Code Ring...

XCR-7

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Colour Code Ring grey - 100 stk.
search

Neutrik Colour Code Ring...

XCR-8

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Rubber sealing cap g-type for Neutrik powerCON® NAC3FPX*
search

Neutrik Rubber sealing cap...

SCNAC-03

The G-shaped rubber sealing cap protects the powerCON TRUE1 TOP built-in connectors NAC3FPX* from dust and water in accordance with protection class IP65. User-friendly and easy to install, the compact frame enables a high packing density on the housing.

Pris 29,00 kr.

På fjernlager

Neutrik Rubber sealing cap for Neutrik powerCON® NAC3PX-TOP
search

Neutrik Rubber sealing cap...

SCNAC-04

The SCNAC-04 rubber sealing caps with two caps (power-in / power-out) protect the powerCON TRUE1 TOP built-in connectors NAC3PX-TOP against dust and water in accordance with protection class IP65. The compact frame is user-friendly, easy to install and enables a high packing density on the housing.

Pris 39,00 kr.

På fjernlager

Neutrik Colour Code Ring red - 100 stk.
search

Neutrik Colour Code Ring...

XCR-2

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Colour Code Ring yellow - 100 stk.
search

Neutrik Colour Code Ring...

XCR-4

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Colour Code Ring brown - 100 stk.
search

Neutrik Colour Code Ring...

XCR-1

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Colour Code Ring blue - 100 stk.
search

Neutrik Colour Code Ring...

XCR-6

Coloured marking rings for coding all connectors of the classic Neutrik X series. Easy handling as the insert does not have to be desoldered to change the ring.

Pris 419,00 kr.

På fjernlager

Neutrik Colour Code Ring green - 100 stk.
search

Neutrik Colour Code Ring...

XCR-5

Colored coding rings with labeling block. Insert must not be unsoldered to change ring.

Box of 100 pcs.

Pris 419,00 kr.

På fjernlager

Neutrik Rubber sealing cap d-type for Neutrik powerCON® NAC3MPX*
search

Neutrik Rubber sealing cap...

SCNAC-01

The D-shaped rubber sealing cap protects the powerCON TRUE1 TOP NAC3MPX* and powerCON 20A NAC3MPXXA* and NAC3MPA-* against dust and water in accordance with protection class IP 65. The compact frame is user-friendly, easy to install and enables a high packing density.

Pris 29,00 kr.

På fjernlager

Neutrik Colour Code Ring yellow - 20 stk.
search

Neutrik Colour Code Ring...

XXR-4

Colored marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series) Easy handling as the insert does not have to be desoldered to change the ring.

Easy handling as the insert does not have to be desoldered to change the ring.

Pris 69,00 kr.

På fjernlager

Neutrik Colour Code Ring white - 20 stk.
search

Neutrik Colour Code Ring...

XXR-9

Colored coding rings. Insert must not be unsoldered to change the color coding. Box of 100 pcs.

Pris 69,00 kr.

På fjernlager

Neutrik Colour Code Ring orange - 20 stk.
search

Neutrik Colour Code Ring...

XXR-3

Colored marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series) Easy handling as the insert does not have to be desoldered to change the ring.

Easy handling as the insert does not have to be desoldered to change the ring.

Pris 69,00 kr.

På fjernlager

Neutrik Colour Code Ring red - 20 stk.
search

Neutrik Colour Code Ring...

XXR-2

Colored marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series) Easy handling as the insert does not have to be desoldered to change the ring.

Easy handling as the insert does not have to be desoldered to change the ring.

Pris 69,00 kr.

På fjernlager

Neutrik Colour Code Ring green - 20 stk.
search

Neutrik Colour Code Ring...

XXR-5

Colored marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series) Easy handling as the insert does not have to be desoldered to change the ring.

Easy handling as the insert does not have to be desoldered to change the ring.

Pris 69,00 kr.

På fjernlager

Neutrik Colour Code Ring blue - 20 stk.
search

Neutrik Colour Code Ring...

XXR-6

Coloured marking rings for coding all connectors of the Neutrik XX series. (XX-, EMC-, RX-, XX-HE-, XX-14-, XX-Crimp-, crystalcCON-, Series)

Easy handling as the insert does not have to be desoldered to change the ring.

Pris 69,00 kr.

På fjernlager

Neutrik Network plug housing Neutrik etherCON®
search

Neutrik Network plug...

NE8MX-B

The cable connector protection for pre-assembled RJ45 cable connectors consists of a black chrome-plated housing, stop washer, collet chuck, clamping sleeve and kink protection. It is supplied with two kink protection elements for cable diameters up to 5 mm or 8 mm. An RJ45 cable connector is not included in the scope of delivery.

The etherCON cable connector protection upgrades a conventional RJ45 connector to an extremely robust and lockable solution.

Attention! Not compatible with the CAT6 panel jacks NE8FDY-C6 and NE8FDY-C6-B.

Pris 49,00 kr.

På fjernlager

Neutrik Network plug housing Neutrik etherCON®
search

Neutrik Network plug...

NE8MX

RJ45 cable connector carrier for preassembled RJ45 plugs consists of shell, fixing disk, chuck, bushing and boot. Packed with two cable protection elements for cable diameter either up to 5 mm or 8 mm. Cable connector carrier does not include a RJ45 plug.

The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.

Attention! Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.

Pris 49,00 kr.

På fjernlager

Neutrik Network chassis connector Neutrik etherCON® | Cat.6a
search

Neutrik Network chassis...

NE8FDX-P6-B

Attention! Does not intermate with CAT6 cable connector NE8MC6-MO and NKE6S* cables.

  • Ruggedized connector with CAT6A component compliance according to ISO/IEC 11801 and TIA/EIA 568-C.2
  • PoE+ compliant according to 802.3at Type2
  • Rugged latch lock system million fold proven
  • Intermateable with the existing etherCON CAT5 range
  • Shielded system - high noise immunity and EMI protection
Pris 239,00 kr.

På fjernlager

Neutrik Network plug Neutrik etherCON® | Cat.6a
search

Neutrik Network plug...

NE8MX6-B

The set NE8MX6-B includes a cable plug carrier offering a robust metal shell, proven Neutrik chuck-type strain relief and a CAT6A RJ45 plug. The set is suitable for a cable diameter range of 7 mm to 9.5 mm and gauge of AWG26/1 - AWG22/1 (solid) or AWG27/7 - AWG22/7 (stranded).

Attention! Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.

Pris 209,00 kr.

På fjernlager