. Køb AdamHall hos CC ProShop (10) .
Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

AdamHall

AdamHall

Aktive filtre

  • Status: Disponibel
  • Mærker: Adam Hall 19" Parts
  • Mærker: Adam Hall Accessories
  • Mærker: Adam Hall Connectors
  • Mærker: Gravity
Gravity Loudspeaker Stand with Base and Cast Iron Weight Plate
search

Gravity Loudspeaker Stand...

SSP WB SET 1

This rugged speaker stand has a much smaller footprint than tripods and a 35 mm rod with a high-strength steel sleeve, ergonomic locking screw and safety stud for secure height adjustment. This stand is adjustable from 1.05 to 1.8 m in 7.5 cm increments. It comes with an additional weight disc from our patented VARI-WEIGHT® stability system, ensuring both a more secure footing and more convenient transport of the system as a whole. The flat round base and the additional disc weigh 17.1 kg in total, thereby ensuring excellent stability.

Pris 1.049,00 kr.

På fjernlager

Gravity Wind-Up Speaker Stand
search

Gravity Wind-Up Speaker Stand

SP 4722 B

The Gravity GSP 4722 B is a heavy-duty speaker stand with a convenient hand crank and rack and pinion that make it easy to raise your speakers to the desired height. It is made of hard-wearing steel tubing with a folding tripod base and durable cast aluminium leg collar. A large knob set screw and safety pin secure the telescoping pole, which extends from 1.5 m to a maximum height of 2.4 m. The stand is TÜV/GS certified.

Pris 1.509,00 kr.

På fjernlager

Gravity Traveler extension
search

Gravity Traveler extension

MATE 01The Traveler Series' Extension

Every bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed.

The Gravity® MA TE 01 can be taken everywhere you go. It's so light and space-saving, there's absolutely no need for you to worry about weight or storage space.

This tool lets you extend almost all available Traveler products by 100 mm. The increased load caused by the extension is counteracted by an adapted ball head in the joint. The arm is easy to implement and gives you extra flexibility for your Traveler accessories.

Gravity® has once again delivered a small, useful and reliable product for you to round off your collection of stands.
Pris 79,00 kr.

På fjernlager

Gravity Traveler 3D Arm with Pop Filter
search

Gravity Traveler 3D Arm...

MA 3D A POP 1The Traveler Series' Pop Filter with 3D Arm

Every bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed.

The Pop Filter with 3D Arm MA 3D A POP 1 can be taken everywhere you go. It's so light and space-saving, there's absolutely no need for you to worry about weight or storage space.

With this tool you can enhance your voice- and vocal recordings by placing the high-quality pop filter, with double nylon mesh and a large screen diameter of 15.7 cm between you and your microphone. This way you avoid unwanted pop noises and clipping.

Its fastening mechanism is quick and easy to assemble. The large clamping range from 15 to 35 mm lets you mount it on all popular microphone stands, and the three joints' 360° rotation options allow you to install it as you like. Simply loosen, adjust and tighten the wing-screws. Voila - you're all done! Once set, the MA 3D A POP 1 stays locked in place.

Gravity® has once again delivered a small, useful and reliable product for you to round off your collection of stands.
Pris 199,00 kr.

På fjernlager

Gravity Pop Filter with VARI®-ARM
search

Gravity Pop Filter with...

MA POP 1

To make sure your pop filter successfully filters undesired pop noises and clipping, you need to be able to position it perfectly in front of your mouth. This is simple with the Gravity MA POP 1 pop filter, with its large screen diameter, double nylon mesh and VARI®-ARM.

The VARI®-ARM allows you to position the pop filter precisely where it will work best, and then fix into position so that it won't shift.

All joints can be moved using only one single adjustment screw. Once the desired position has been achieved, you simply tighten the screw to fix the whole VARI®-ARM. This way, your pop filter won't slip out of position while you're sitting at your desk creating a podcast or standing in the studio booth recording vocals.

The solid clamp fits on any microphone stand, on the edge of a table or any other surface you want to attach it within the clamping range of 15 mm to 35 mm.

Pris 509,00 kr.

På fjernlager

Gravity Handheld Wireless Microphone Clip
search

Gravity Handheld Wireless...

MS CLMP 34

This microphone clip acommodates most handheld wireless microphones with shaft diameters ranging from 34 to 42 mm. Made of unbreakable high-quality elastic material, it firmly holds your mic and tilts for perfect positioning. The clip has a standard 5/8" female thread and includes a 3/8" adapter to fit all mic stands and boom arms.

Pris 49,00 kr.

På fjernlager

Gravity Microphone Clamp 25mm
search

Gravity Microphone Clamp 25mm

MS CLMP 25

The GMSCLMP 25 is compatible with most handheld dynamic microphones and acommodates shaft diameters from 24 to 35 mm. The unbreakable clip holds your mic firmly in place and swivels to aim it as needed. The Gravity microphone clip includes a 3/8" adapter.

Pris 49,00 kr.

På fjernlager

Gravity Universal Microphone Clamp for Handheld Microphones
search

Gravity Universal...

MS U CLMP

Show starts in an hour, people are waiting, you are setting the stage and you feel the pressure because you just can't find that right clamp. The search is over!

With the MS U CLMP you have a clamp that fits any microphone.

It's clamping range of 14-42 mm will hold any microphone in your collection, both round or conical. It will also make sure not to scratch your microphones due to the EVA padded grip.

With a Gravity MS U CLMP, you have an all-purpose solution for attaching any hand-held microphone.

Pris 49,00 kr.

På fjernlager

Gravity Transport Bag for Square Base Plate
search

Gravity Transport Bag for...

BG WBLS 331

The robust, padded carrier bag, made of water-repellent 1680D ballistic nylon, is specially designed for the square base plates (563 x 563 mm) of the Gravity lighting stands GLS331B and GLS431B. It has two carrying straps with a soft Velcro handle, a sturdy double zip and a see-through window for labels.

Pris 299,00 kr.

På fjernlager

Gravity Spacer 41 mm to 35 mm M20
  • På tilbud!
  • -20,00 kr.
search

Gravity Spacer 41 mm to 35...

SF 20 M 20

135 mm extension for loudspeaker stands made of robust steel tube with powder coating and M20 thread (1 x male, 1 x female), suitable for all subwoofer spacer tubes with M20 thread. Also fits threads that are countersunk up to 100 mm deep, with an inner diameter of 36 mm.

Pris 99,00 kr. Normalpris 119,00 kr.

På fjernlager

Gravity Weight Plate for Round Base Microphone Stands
search

Gravity Weight Plate for...

MS 2 WP

This 2.3 kg weight disc made of cast iron can be mounted on all Gravity microphone stands with a round base, ensuring a particularly high level of stability.

VARI-WEIGHT® _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

The round base is not included.

Pris 119,00 kr.

På fjernlager

XLR plug 3-pole | with terminating resistor
search

XLR plug 3-pole - with...

3 STAR DMX T 3

DMX plug with integral 120-ohm terminator

  • XLR 3-pin male PIN 2 and PIN 3 assignments
  • Terminator for a serial DMX chain
Pris 59,00 kr.

På fjernlager

Gravity Remote operating pole for spotlights
search

Gravity Remote operating...

LS OP 1

Anyone who works as a lighting technician in theatres, TV studios, congress centres or other production venues knows: the optimal illumination of a stage is precision work. At the same time, the tight schedules of a production rarely allow for fetching a ladder every time to manually adjust static spotlights high up in the rig - not to mention the safety risk for the people on site.

With the LS OP 1, Gravity® has a solution for these situations in its portfolio. The extendable operating pole enables the alignment of installed spotlights at great heights. The adjustment options include the pan and tilt angle, as well as focus adjustment (Pan/Tilt/Focus) via standard bells and the folding of barndoors.

The maximum length of 6.4 metres is achieved via three individually lockable extensions and can be extended to the desired length in a few simple steps. In addition, the robust but lightweight aluminium construction facilitates operation enormously.

At the upper end of the LS OP 1 is the integrated hook for hanging in the pan/tilt/focus bells. The crank at the lower end of the pole allows the hook to be easily turned into the desired position. The crank can be removed for easy and space-saving transport.

Pris 2.809,00 kr.

På fjernlager

Universal Hook Clamp with Clamping Lever MK2 + SS018 Bolt
search

Universal Hook Clamp with...

SUPER CLAMP MK2 SET 1

When you face challenges like mounting lighting equipment, positioning cameras or loudspeakers at the proper angle, hanging Molton and backdrops, or mounting other equipment safely on a truss, you need just the right companion you can trust in.

The new Super Clamp now offers you the possibility to fix heavy objects such as lighting equipment easily with one click. The "One-Click Auto-Lock", snaps the fixing bolt directly into place.

Whether working as a photographer, a YouTuber in a home studio, or as a lighting technician attaching lights to a truss, the Super Clamp gives your creativity the freedom it requires.

As well as having an impressive load capacity, the rugged Super Clamp can be used in practically any situation and on any surface - curved or flat. Your new clamping companion can support up to 20 kg and enjoys German TÜV certification.

See for yourself how quick and easy it is to mount your equipment securely using the Super Clamp.

Pris 329,00 kr.

På fjernlager

Universal Hook Clamp with Toggle Black and with Bolt SS018
search

Universal Hook Clamp with...

SUPER CLAMP SET 1
  • Perfect for lighting and multimedia applications
  • Adjustable clamping lever _ can be operated in any position
  • Full metal (stainless steel and die-cast aluminium alloy)
  • For mounting on round and square tubes as well as on flat objects
  • Clamping range: 13 _ 55 mm
  • 5/8" (16 mm) hexagonal or circular pin insert
  • 1 x M6 and 2 x M5 thread
  • TÜV certified
  • Max. load capacity: 20 kg
  • Not oxidising
  • Various mounting bolts available as an option
  • 16 mm M10 bolt for SCP710B
Pris 309,00 kr.

På fjernlager

Safety Rope 4 mm length 1 m
search

Safety Rope 4 mm length 1 m

S 42100Adam Hall safety cables - clearly comply with legal regulations
  • 6 x 19 + fibre core
  • Eyelet at both ends

ATTENTION: Screw link S93061 has to be ordered separately

Pris 79,00 kr.

På fjernlager

Saveking® Safety Rope 5 mm
search

Saveking® Safety Rope 5 mm,...

S 58060 SKSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

Pris 189,00 kr.

På fjernlager

Saveking® Safety Rope 5 mm
search

Saveking® Safety Rope 5 mm,...

S 58062 SKBSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

Pris 259,00 kr.

På fjernlager

Screw Link long
search

Screw Link long, 6 mm thick

S 93061Adam Hall safety cables - clearly comply with legal regulations
  • Chain Link for S42100
  • Stamped according to DIN 56926 (code number: 200)
Pris 29,00 kr.

På fjernlager

Safety Rope 5 mm with Screw Link
search

Safety Rope 5 mm with Screw...

S 56100

Adam Hall safety ropes - clearly oriented to the legislator

  • 6 x 19 + FE
  • Thimble on both sides
  • One side with captive quick connection link (SVG), galvanised, 90 x 9 mm
  • Stamped according to DIN 56927 B200 (code: BGV C1)
  • Up to 45 kg unit weight with two-line securing method
Pris 139,00 kr.

På fjernlager

Câble d'acier 4 mm with Screw Link
search

Câble d'acier 4 mm with...

S 45062 B
  • 6 x 19 + fibre core
  • Eyelet at both ends
  • One end with unlosable chain link (black galvanised, 6 mm thick) 0.60 m.
  • Up to 20 kg device weight in the case of double-stranded securing method
Pris 179,00 kr.

På fjernlager

Safety Rope 3 mm
search

Safety Rope 3 mm, 0.6 m,...

S 37060 PAdam Hall safety cables - clearly comply with legal regulations
  • 6 x 19+ fibre core
  • Eyelet at both ends
  • One end with non detachable chain link (galvanised, 5mm thick)
  • Stamped by sticker according to DIN 56927 B140
Pris 99,00 kr.

På fjernlager

Safety Rope 8 mm length 5 m for S80VS Wire Clip for Ropes 6 - 8 mm
search

Safety Rope 8 mm length 5 m...

S 80500

Wire cable suitable for cable holders of types DSH 50S (5 mm) 80VS (8 mm). The cut end of the cable is tin-plated to ensure cable durability when used with the cable holder, guaranteeing complete suitability for practical applications (see illustration). For this reason, all suspension cables for Adam Hall DSH wire cable holders are provided with tin plating at one end and a eyelet at the other. Certified in accordance with BGV C1.

  • 6 x 19 + fibre core
  • Tin-plated at one end with
  • Eyelet at the other end
Pris 449,00 kr.

På fjernlager

Safety Rope 5 mm length 5 m for S50S Wire Clip for Ropes 4 - 5 mm
search

Safety Rope 5 mm length 5 m...

S 50500

Wire cable suitable for cable holders of types DSH 50S (5 mm) 80VS (8 mm). The cut end of the cable is tin-plated to ensure cable durability when used with the cable holder, guaranteeing complete suitability for practical applications (see illustration). For this reason, all suspension cables for Adam Hall DSH wire cable holders are provided with tin plating at one end and a eyelet at the other. Certified in accordance with BGV C1.

  • 6 x 19 + fibre core
  • Tin-plated at one end with
  • Eyelet at the other end
Pris 219,00 kr.

På fjernlager

Wire Rope Holder with Coupling Part Ring for 4 - 5 mm Ropes
search

Wire Rope Holder with...

S 50 S V3
  • Wire rope holder Type50SV III M12
  • With coupling part ring, locking nut and six-ball mechanism.
  • Wire rope holders are marked and certified according to BGV-C1
  • Please also note our information in the download area
Pris 419,00 kr.

På fjernlager

Safety Rope 4 mm with Screw Link
search

Safety Rope 4 mm with Screw...

S 45100Adam Hall safety cables - clearly comply with legal regulations
  • 6 x 19 + fibre core
  • Eyelet at both ends
  • One end with unlosable carabiner (90 x 9, with screw lock)
  • Stamped: WLL 250 kg W/K
  • Up to 20 kg device weight when using two safety cables
Pris 119,00 kr.

På fjernlager

Saveking® Safety Rope 5 mm
search

Saveking® Safety Rope 5 mm,...

S 58100 SKSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

Pris 189,00 kr.

På fjernlager

Safety Cable
search

Safety Cable, 6 mm with...

S 66100

Adam Hall Safety Cables - conform explicitly to legislation

  • 6 x 19 + FE
  • Cable eye stiffener on both sides (in accordance with DIN-EN 12385-4)
  • One side with captive quick link, galvanised, 90 x 9 mm
  • Stamped in accordance with DIN 56927 B200 (code: BGV C1)
  • Up to 60 kg equipment load capacity in a double strand installation
Pris 179,00 kr.

På fjernlager

Safety Rope 3 mm
search

Safety Rope 3 mm, 0.6 m,...

S 37062 PAdam Hall safety cables - clearly comply with legal regulations
  • 6 x 19+ fibre core
  • Eyelet at both ends
  • One end with non detachable chain link (galvanised, 5mm thick)
  • Stamped by sticker according to DIN 56927 B140
Pris 149,00 kr.

På fjernlager

Safety Rope 4 mm with Fall Brake and Chain Link length 1 m
search

Safety Rope 4 mm with Fall...

S 43100 SKSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

Pris 169,00 kr.

På fjernlager

Safety Rope 8 mm length 1 m
search

Safety Rope 8 mm length 1 m

S 82100

Adam Hall safety cables - clearly comply with legal regulations

  • 6 x 19 + fibre core
  • Eyelet at both ends
  • Stamped: BGV C1 I.W 8 mm 295 kg
  • Up to 100 kg device weight when using two safety cables

ATTENTION: Chain link S93100 has to be ordered separately!

Pris 179,00 kr.

På fjernlager

Round Sling with Fabric Insert 1.2 t - 0.5 m
search

Round Sling with Fabric...

SX 01205

Black roundsling with fiber or wire rope inlay and lashings - Made in Germany. Our roundslings with fiber inlay are featuring a tubular coating made from extra dense polyester webbing with Pu-impregnation. The core consists of endlessly laid polyester yarn. In addition to the marking on the label, the working load can be learned from a colored seam. All roundslings are furnished with user_s manual excerpts on an identification label, marked with utilization length and working load limit (WLL).

Pris 99,00 kr.

På fjernlager

SAVEKING® Safety Rope 3 mm with Fall Brake and Chain Link Length 0.6 m
search

SAVEKING® Safety Rope 3 mm...

S 33060 SKSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

Pris 139,00 kr.

På fjernlager

Saveking® Safety Rope 5mm
search

Saveking® Safety Rope 5mm,...

S 58102 SKBSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

Pris 269,00 kr.

På fjernlager

Safety Rope 3 mm with Screw Link
search

Safety Rope 3 mm with Screw...

S 37060Adam Hall safety cables - clearly comply with legal regulations
  • 6 x 19+ fibre core
  • Eyelet at both ends
  • One end with non detachable chain link (galvanised, 5mm thick)
  • Stamped according to DIN56926 (code number: 140)
Pris 89,00 kr.

På fjernlager

Steel Rope 3 mm with Chain Link length 0.6 m
search

Steel Rope 3 mm with Chain...

S 37062 B
  • 6 x 19 + fibre core
  • Eyelet at both ends
  • One end with non detachable chain link (galvanised, 5 mm thick)
Pris 139,00 kr.

På fjernlager

Gravity Carry Bag for Distance Poles
search

Gravity Carry Bag for...

BG DBLS 331

The BG DBL 331 is a heavy duty carry bag with 10 mm padding that holds the two GLS331B and GLS431B lighting distance poles. The bag is made from tough 1680D nylon that is water repellent and easy to clean, a padded divider keeps the poles separate to prevent scratches. The bottom and all other points of stress are reinforced for extra strength, two carry straps with comfortable wrap-around handle and the heavy gauge single pull zipper closure of the lid provide handling convenience.

Pris 469,00 kr.

På fjernlager

Floor and Wall Mounting Plate for all PAR16/36/56/64 PAR Spots
  • På tilbud!
  • -15,00 kr.
search

Floor and Wall Mounting...

38163

Floor and wall mounting plate for all PAR16/36/56/64 Flood and Spotlights. Easy to use with bolt and butterfly nut through center mounting hole. Three mounting holes ( Ø 5 mm) to fix the plate to the wall or floor if required. Simple, elegant and inexpensive method for mounting PAR cans!

  • - Including suitable bolt M8 x 35 and butterfly nut
Pris 94,00 kr. Normalpris 109,00 kr.

På fjernlager

Gravity Floor Stand for Spots
search

Gravity Floor Stand for...

LS FLOORX B

The LS FLOORX B is a compact stand for placing light fixtures on the stage floor. The folding design of powder coated steel with ergonomic locking screw enables space saving storage, hefty rubber feet prevent marring of the floor while providing a secure grip.

Pris 119,00 kr.

På fjernlager

Gravity Universal T-Bar for 35 mm Stands
  • På tilbud!
  • -30,00 kr.
search

Gravity Universal T-Bar for...

LS TB 01

This universal crossbar quickly converts stands with a 35 mm tube diameter into light stands. It is made with light but robust aluminium and is installed quickly and safely using the robust flange with ergonomic adjustment screw.

Pris 199,00 kr. Normalpris 229,00 kr.

På fjernlager

Gravity Lighting Stand with Square Steel Base and Excentric Mounting Option
  • På tilbud!
  • -210,00 kr.
search

Gravity Lighting Stand with...

LS 431 W

The GLS 431 W lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.

Pris 1.669,00 kr. Normalpris 1.879,00 kr.

På fjernlager

Gravity Lighting Stand with T-Bar
search

Gravity Lighting Stand with...

LS TBTV 17

The GLSTBTV17 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity.

The unbreakable height adjustment collars are made of steel for additional strength to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberised T-Joint _ making the T-Bar not only easier to handle and carry but also better looking than regular stands.

Pris 689,00 kr.

På fjernlager

Gravity Clamping Pole VARI®-POLE
search

Gravity Clamping Pole...

LS VARI®-POLE 01 B

Made of lightweight, black anodized aluminium tubing with a secure locking mechanism, the Gravity VARI®-POLE extends from 210 cm to 370 cm and quickly mounts between floors and ceilings. It is held in place by pressure, and strong rubber on both sides for a variety of other applications.

Pris 819,00 kr.

På fjernlager

Gravity Twin Extension Speaker and Lighting Stand
search

Gravity Twin Extension...

SP 5522 B

The SP 5522 B is a classic tripod speaker and lighting stand made from thick walled, yet lightweight powder coated steel tubing with a load capacity of 30 kg and twin extensions for a maximum height of 3 m.

The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. The unbreakable height adjustment collars are made of steel for additional strength featuring safety pins to securely lock the extensions in place.

The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. A set of black coding rings is included with the SP 5522 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 759,00 kr.

På fjernlager

Gravity Touring-Lighting Stand with Square Steel Base
  • På tilbud!
  • -210,00 kr.
search

Gravity Touring-Lighting...

TLS 431 B

Well equipped to handle the daily grind and time constraints of touring: That's the TLS 431 B light stand from the Gravity Touring Series. Its heavy steel base featuring three M20 female threads for off-centre installation guarantees a firm footing in all circumstances, whereas two integrated handles make it easy to transport. In comparison to the standard series, the base is slightly smaller, but it still offers the same amount of stability. The added bonus here is that it can now also be used as a divider in Transflex cases. The base-to-pole connection has been made stronger by adding a reinforcing sleeve to prevent wobbling. With the 35 mm extension tube featuring a M10 female thread, the stand can be extended in height up to 2.40 meters. Thanks to the automatic LockPin® technology, it has never been easier to adjust the height of a stand. Because the pin automatically snaps into the holes when adjusting upwards, a separate locking pin is no longer necessary.

Pris 1.939,00 kr. Normalpris 2.149,00 kr.

På fjernlager

Gravity Lighting Stand with Square Steel Base and Excentric Mounting Option
search

Gravity Lighting Stand with...

LS 431 B

The GLS 431 B lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.

Pris 1.769,00 kr.

På fjernlager

SAVEKING® Safety Rope 4 mm
search

SAVEKING® Safety Rope 4 mm,...

S 43062 SKBSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

Pris 219,00 kr.

På fjernlager

SAVEKING® Safety Rope 3 mm
search

SAVEKING® Safety Rope 3 mm,...

S 33062 SKBSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

Pris 189,00 kr.

På fjernlager

Screw Link long
search

Screw Link long, 10 mm thick

S 93101Adam Hall safety cables - clearly comply with legal regulations
  • Chain Link for S82100
  • Galvanised
  • 10 mm thick
  • Stamped according to DIN 56926 (code number: 550)
Pris 79,00 kr.

På fjernlager

Saveking® Safety Rope 4 mm
search

Saveking® Safety Rope 4 mm,...

43102PSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

Pris 239,00 kr.

På fjernlager

SAVEKING® Safety Rope 3 mm
search

SAVEKING® Safety Rope 3 mm,...

S 33100 SKSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

Pris 159,00 kr.

På fjernlager

Black 5 mm Steel Rope with 2 x Thimble Eyes
search

Black 5 mm Steel Rope with...

S 56102 B
  • Steel rope, 6 x 19 + SE
  • Thimble eye at each end
  • One end with captive quick link (QL), black zinc-plated, 90 x 8 mm
  • Up to 45 kg device weight with dual strand securing method
Pris 219,00 kr.

På fjernlager

SAVEKING® Safety Rope 4 mm with Fall Brake and Chain Link length 0.6 m
search

SAVEKING® Safety Rope 4 mm...

S 43060 SKSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

Pris 159,00 kr.

På fjernlager

SAVEKING® Safety Rope 3 mm
search

SAVEKING® Safety Rope 3 mm,...

S 33102 SKBSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

Pris 199,00 kr.

På fjernlager

Tool for Installing and removing Cage Nuts
search

Tool for Installing and...

565 XTOOL

This tool is an indispensable aid for technicians and installers who want to install or remove captive nuts, such as in 19" (48 cm) rack rails. Designed for easy use, it reduces the risk of injury in comparison to using a screwdriver or other tool. Using the pliers also helps avoid damage to the rack or installation parts.

Pris 119,00 kr.

På fjernlager

Tilbage til toppen

Mest solgte

AFMONTERINGSNØGLER BLAUPUNKT 2 STK.
search

AFMONTERINGSNØGLER...

Vægt (Emb.) 60g
Rumfang (Emb.) 0.00074025
Bredde (Emb.) 94mm
Længde (Emb.) 225mm
Højde (Emb.) 35mm
Pris 19,00 kr.

På fjernlager

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.