Lighting Stand, Medium
SLTS 09
- Medium lighting stand with crossbeam
- Including set of 4 screws with washer, safety disc and wing nuts
På fjernlager
.
Filtrer efter
Status
Selections
Mærker
Pris
25,00 kr. - 3.909,00 kr.
Der er 143 varer.
Aktive filtre
SLTS 09
På fjernlager
LS TB 01
This universal crossbar quickly converts stands with a 35 mm tube diameter into light stands. It is made with light but robust aluminium and is installed quickly and safely using the robust flange with ergonomic adjustment screw.
På fjernlager
LS 431 W
The GLS 431 W lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.
På fjernlager
TLS 431 B
Well equipped to handle the daily grind and time constraints of touring: That's the TLS 431 B light stand from the Gravity Touring Series. Its heavy steel base featuring three M20 female threads for off-centre installation guarantees a firm footing in all circumstances, whereas two integrated handles make it easy to transport. In comparison to the standard series, the base is slightly smaller, but it still offers the same amount of stability. The added bonus here is that it can now also be used as a divider in Transflex cases. The base-to-pole connection has been made stronger by adding a reinforcing sleeve to prevent wobbling. With the 35 mm extension tube featuring a M10 female thread, the stand can be extended in height up to 2.40 meters. Thanks to the automatic LockPin® technology, it has never been easier to adjust the height of a stand. Because the pin automatically snaps into the holes when adjusting upwards, a separate locking pin is no longer necessary.
På fjernlager
STRS 12 U
På fjernlager
372251
På fjernlager
372081Swivel Castor
På fjernlager
372091Swivel Castor
På fjernlager
37300 S
På fjernlager
37601 S
This corner castor has a ball-bearing wheel with a tread of transparent PU on a PP core in a die-cast housing made of aluminium. The wheel has a load capacity of up to 100 kg (for a set consisting of two wheels).
På fjernlager
37551 S
På fjernlager
37501 S
På fjernlager
37500 S
På fjernlager
37600 S
This corner castor has a ball-bearing wheel with a tread of transparent PU on a PP core in a die-cast housing made of aluminium. The wheel has a load capacity of up to 100 kg (for a set consisting of two wheels).
På fjernlager
37450 S
På fjernlager
37042
The ball bearing-free castor consists of impact-resistant PA (Polyamide). This castor is mounted on a 10 mm deep, galvanized steel fitting. The overall height after mounting is thus only 41mm.
På fjernlager
37050
På fjernlager
37441Combination of ball corner 4122 and the swivel castor that is used with the 37041.
The result is a small, high quality and smooth running castor, that can be mounted even on small cases without the need of a castor board. Because of the position of the castor (outside corners of the case) it's possible to mount castors on a flightcase where it was not possible to use castors so far.
På fjernlager
372291
På fjernlager
372091 BLK
Swivel castor 80 mm with brake, black
På fjernlager
372151 BLK
På fjernlager
372191 BLK
På fjernlager
372081 BLK
Swivel castor 80 mm, black
På fjernlager
Vægt (Emb.) | 60g |
Rumfang (Emb.) | 0.00074025 |
Bredde (Emb.) | 94mm |
Længde (Emb.) | 225mm |
Højde (Emb.) | 35mm |
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.