Gaffer Tapes Neon Green...
Gaffer adhesive tape
- Very high adhesion
- Easy unwind and easy tear
På lager
.
Filtrer efter
Status
Mærker
Pris
19,00 kr. - 4.689,00 kr.
Der er 53 varer.
Aktive filtre
Gaffer adhesive tape
På lager
Powerful and biodegradable citrus solvent cleaner for degreasing and removing adhesive residues.
Usable on most surfaces and substrates, such as painted and coated surfaces, glass, porcelain, and concrete, and compatible with vinyl and many plastics. It is also ideal for cleaning nozzles and spray glue guns.
Note: Not suitable for preparing surfaces for adhesives or painting!
På lager
The simple and fast adhesive from the spray can for bonding large areas.It bonds many materials to and with each other. Specially developed for permanent bonding of rough and uneven surfaces such as paper, cardboard, felt, fabric, plasticiser- free plastic films, foams, upholstery wadding, for bonding hard foams as well as on wood, glass, metal, ceramics (ideal for case and box makers).
A special valve allows the spray jet to be individually adjusted to the required application. Depending on the material, up to 4 m² of material can be glued per can. The spray adhesive is temperature resistant from -20°C to +75°C.
Please also note our safety data sheet in the download area.
På lager
Galvanized screw with integrated gear rim and washer for easy mounting of substructure rollers.
På fjernlager
Galvanized screw with integrated gear rim and washer for easy mounting of substructure rollers.
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
På fjernlager
Gaffer adhesive tape
På fjernlager
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
På fjernlager
På fjernlager
VP Cable Ties
Available only in 100 packs per type and colour! Other lenghts and colours on inquiry!
På fjernlager
Back-to-Back tape, one side hooks, other side loops.
På fjernlager
VP Cable Ties
Available only in 100 packs per type and colour! Other lenghts and colours on inquiry!
På fjernlager
VP Cable Ties
Available only in 100 packs per type and colour! Other lenghts and colours on inquiry!
På fjernlager
VP Cable Ties
Available only in 100 packs per type and colour! Other lenghts and colours on inquiry!
På fjernlager
Back-to-Back tape, one side hooks, other side loops.
På fjernlager
VP Cable Ties
Available only in 100 packs per type and colour! Other lenghts and colours on inquiry!
På fjernlager
Back-to-Back tape, one side hooks, other side loops.
På fjernlager
Phillips-head Screw with Nut for XLR Sockets
På fjernlager
During rack mounting, ground connections are created between the devices via the metal rails. This is the most common cause of humming noises! Our Hummfrees interrupt these ground loops, the devices are electrically isolated from each other and attached to the rails. An additional effect: the front panels of the devices are protected from mounting damage.
Quick and easy to install: Pull the device 5 cm out of the rack, fold the Humfrees sideways around the corners of the front panel and fasten the device back into the rack with the screws. Now just make sure that the devices do not touch each other directly on the surfaces. Existing cable connections in the rack do not need to be disconnected.
For M5 screws you can use our enclosed adapter sleeves.
På fjernlager
Set of 4 screws M6 x 16 mm with square nut and washers in the bag
På fjernlager
Mounting kit with square nuts for two 19'' units in a blisterpack.
På fjernlager
Bag of 8 M6 x 12 mm screw with cage nut and washer
På fjernlager
Phillips-head Screw with Nut for XLR Sockets
På fjernlager
Fittings kit with hexagonal nuts for two 19_ devices.
På fjernlager
Bag of 12 M6 x 12 mm screw with cage nut and washer
På fjernlager
Bag of 24 M6 x 20 mm screw with cage nut and washer
På fjernlager
Galvanized 15 mm washer with an inner diameter of 5 mm. Also ideal for use in conjunction with rivets for rear reinforcement.
På fjernlager
The integrated sprocket means that no U-disc or washer is required.
På fjernlager
På fjernlager
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.