Gaffer Tapes Neon Yellow...
Gaffer adhesive tape
- Very high adhesion
- Easy unwind and easy tear
På fjernlager
.
Filtrer efter
Status
Selections
Mærker
Pris
19,00 kr. - 4.689,00 kr.
Der er 155 varer.
Aktive filtre
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
The Truss Stacker Roller Board System combined with the 'Interface Stacker 382100' enables easy and trouble-free stacking of trusses for safe transport. The birch plywood roller boards are available in versions with 2 x 2.3, 3 and 4 castors and are suitable for 3 and 4 point trusses.
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
På fjernlager
På fjernlager
Gaffer adhesive tape
På fjernlager
På fjernlager
På fjernlager
Gaffer adhesive tape
På fjernlager
På fjernlager
AT170 is a strong cloth duct tape coated with an aggressive pressure sensitive solvent free rubber - resin adhesive. This standard duct tape is suitable for short term external applications due to its water and weather resistance. Its non-corrosive adhesive will not rust or stain substrates during application. AT170 adheres very well over a wide temperature range from -50°C to +65°C. Really easy to apply, this duct tape conforms well to smooth and uneven surfaces. Ideal for short term applications including sealing bags and double glazing units, and joining polythene sheeting.
På fjernlager
AT170 is a strong cloth duct tape coated with an aggressive pressure sensitive solvent free rubber - resin adhesive. This standard duct tape is suitable for short term external applications due to its water and weather resistance. Its non-corrosive adhesive will not rust or stain substrates during application. AT170 adheres very well over a wide temperature range from -50°C to +65°C. Really easy to apply, this duct tape conforms well to smooth and uneven surfaces. Ideal for short term applications including sealing bags and double glazing units, and joining polythene sheeting.
På fjernlager
Gaffer adhesive tape
På fjernlager
PVC Electrical Insulation Tape
På fjernlager
Gaffer adhesive tape
På fjernlager
På fjernlager
Gaffer adhesive tape
På fjernlager
PVC Electrical Insulation Tape
På fjernlager
Gaffer adhesive tape
På fjernlager
Gaffer adhesive tape
På fjernlager
På fjernlager
På fjernlager
På fjernlager
AT170 is a strong cloth duct tape coated with an aggressive pressure sensitive solvent free rubber - resin adhesive. This standard duct tape is suitable for short term external applications due to its water and weather resistance. Its non-corrosive adhesive will not rust or stain substrates during application. AT170 adheres very well over a wide temperature range from -50°C to +65°C. Really easy to apply, this duct tape conforms well to smooth and uneven surfaces. Ideal for short term applications including sealing bags and double glazing units, and joining polythene sheeting.
På fjernlager
På fjernlager
VP Cable Ties
Available only in 100 packs per type and colour! Other lenghts and colours on inquiry!
På fjernlager
VP Cable Ties
Available only in 100 packs per type and colour! Other lenghts and colours on inquiry!
På fjernlager
VP Cable Ties
Available only in 100 packs per type and colour! Other lenghts and colours on inquiry!
På fjernlager
VP Cable Ties
Available only in 100 packs per type and colour! Other lenghts and colours on inquiry!
På fjernlager
VP Cable Ties
Available only in 100 packs per type and colour! Other lenghts and colours on inquiry!
På fjernlager
Gig Bag for Double Keyboard Stand SKS22XB
På fjernlager
På fjernlager
Folding to ultra compact dimensions, the SLED 24 PRO music stand light provides uniform, glare-free illumination from a total of 24 warm white LEDs. The pivoting LED bar adjusts easily for optimum coverage, and the power switch includes three brightness level settings. Elegant and unobtrusive, the SLED 24 PRO features two padded spring clips for quick, secure attachment and can be mains and battery powered. It comes with a 5 V DC adapter, three size AAA batteries and fits into any accessory pouch.
På fjernlager
The flexible light can be operated via any USB type A socket, and is perfect for mixers or racks. Both its goosenecks are 45 cm long and can be flexibly aligned to where the light is needed. Each is equipped with 4 particularly bright COB LEDs and individual on/off switches.
På fjernlager
The SLED1Pro is a compact, handy light with a patented design intended for music stands. The 2 bright and efficient LEDs can be switched individually between 2 brightness levels. Also, the light cone is adjustable thanks to the flexible 220 mm long gooseneck.
Due to its long operating time, it is also suitable as a mobile reading lamp and multifunctional clip light for all lighting needs at home and on the go.
På fjernlager
The SLED 1 ULTRA USB is a matt black gooseneck light with 4 extra bright white COB LEDs and USB connector. The 300 mm gooseneck is easily flexible yet stays put where you bend it, brightness is conveniently adjustable in 3 levels.
På fjernlager
The SLED10 is a very compact and handy light with a patented design intended for music stands. The 10 bright and efficient LEDs can be switched individually between 2 brightness levels. Also, the light cone is adjustable thanks to the flexible 220
mm long gooseneck.
Due to its long operating time, it is also suitable as a mobile reading lamp and multifunctional clip light for all lighting problems at home and on the go.
På fjernlager
The SLED2Pro is a compact, handy light with a patented design intended for music stands. The 4 bright and efficient LEDs can be switched individually between 2 brightness levels. Also, the light cone is adjustable thanks to the flexible 220 mm long goosenecks.
Due to its long operating time, it is also suitable as a mobile reading lamp and multifunctional clip light for all lighting needs at home and on the go.
På fjernlager
The SLED1USBPRO is a compact, USB Goosebeck Light with 2 LEDs.
The 2 bright and efficient LEDs can be switched individually between 2 brightness levels. Also, the light cone is adjustable thanks to the flexible 200 mm long gooseneck.
Works on any PC or MAC USB port and is therefore also ideal for working on the laptop, if you do not want to illuminate the whole room.
På fjernlager
This durable, lightweight carry case is designed for storing and transporting your in-ear headphones. The rigid outer shell with soft fleece lining provides solid protection from impact, scratches and dust. The case features an internal mesh pocket for ear tips and other accessories, a sturdy zip closure and detachable carabiner belt clip.
På fjernlager
The SLED 1 ULTRA XLR 3 A is a matt black gooseneck light with 4 extra bright white COB LEDs and 3-pin male angled XLR plug that works on dedicated 12 volt task light and 48 volt phantom power. The 400 mm gooseneck is easily flexible yet stays put where you bend it, the power switch is conveniently located on top of the lamp.
På fjernlager
The SLED 1 ULTRA XLR 4 is a matte-black gooseneck light with 4 especially bright COB LEDs and a 4-pin XLR connector. It operates on either 12-volt or 48-volt phantom power. The 30 cm gooseneck is both flexible and sturdy; the on/off switch is easily accessible on the lamp head.
På fjernlager
The SLED 1 ULTRA XLR 3 is a matt black gooseneck light with 4 extra bright white COB LEDs and 3-pin male XLR plug that works on dedicated 12 volt task light connectors and 48 volt phantom powered mic inputs. The 300 mm gooseneck is easily flexible yet stays put where you bend it, the power switch is conveniently located on top of the lamp.
På fjernlager
The SLED 1 ULTRA BNC is a matt black gooseneck light with 4 extra bright white COB LEDs and male BNC connector that works on dedicated 12 volt task light and 48 volt phantom power. The 300 mm gooseneck is easily flexible yet stays put where you bend it, the power switch is conveniently located on top of the lamp.
På fjernlager
The SLED 1 ULTRA USB C is a matt black gooseneck light with 4 extra bright white COB LEDs with selectable colour and USB connector. The 300 mm gooseneck is easily flexible yet stays put where you bend it, the colour is conveniently adjustable in warm white, cold white, red, green and blue.
På fjernlager
The SLED 1 ULTRA XLR 4 A is a matt black gooseneck light with 4 extra bright white COB LEDs and 4-pin male angled XLR plug that works on dedicated 12 volt task light and 48 volt phantom power. The 400 mm gooseneck is easily flexible yet stays put where you bend it, the power switch is conveniently located on top of the lamp.
På fjernlager
You now have an excellent SUB for your ICOA and, of course, you want to keep enjoying it for a long time to come. One way to make sure this happens is to protect your subwoofer using the padded protective cover designed for it, which will keep it from getting scratched up during a hectic tour.
But not only that. Made of water-repellent 1680D nylon, the cover also protects your ICOA SUB from splashing liquids.
Its spacious outer pocket gives you a place to conveniently keep cables and other accessories.
Wishing you a lot of fun and a long life for your ICOA SUB.
På fjernlager
You now have an excellent SUB for your ICOA and, of course, you want to keep enjoying it for a long time to come. One way to make sure this happens is to protect your subwoofer using the padded protective cover designed for it, which will keep it from getting scratched up during a hectic tour.
But not only that. Made of water-repellent 1680D nylon, the cover also protects your ICOA SUB from splashing liquids.
Its spacious outer pocket gives you a place to conveniently keep cables and other accessories.
Wishing you a lot of fun and a long life for your ICOA SUB.
På fjernlager
Made of polyurea coated 15 mm birch ply for extra strength and durability, this stackable dolly board is custom fit for the Stinger® G3 Subwoofer 15". It is specially designed for the STINGER SUB 15 G3 and the STINGER SUB 15A G3 and is securely fastened with two integrated butterfly locks. Four heavy-duty castors with 100 mm wheels now make the Sub easy to move.
På fjernlager
This stackable roller board is made of 15 mm birch multiplex with a polyurea coating that makes it extremely resilient and long-lasting. It is specially designed for the CURV 500® TS subwoofer and is securely fastened by means of two integrated butterfly locks. Four heavy-duty rollers with 100 mm wheels now make the sub easy to move around.
På fjernlager
Protective Cover for DAVE15G³ Satellites
På fjernlager
Protective Cover for Dave18G³ Subwoofer
På fjernlager
Protective cover for DAVE 8 subwoofer
På fjernlager
Protective Cover for DAVE15G³ Subwoofer
På fjernlager
This sturdy castor board is made of durable 15 mm birch plywood and specially designed for the LD MAUI P900 subwoofer. It features two fixed castors and a swivel castor with 80 mm wheels. Engaging the swivel castor's wheel and swivel head brake locks the dolly in place.
På fjernlager
Keep your MAUI P900 subwoofer in mint condition with this slip cover. It is made of hard wearing water repellent 1680D nylon with thick 16 mm padding to prevent dings and damage. Featuring a reinforced cutout with hook-and-loop fastener flap for easy handle access and an outer pocket to store your accessories, the cover provides a perfect fit. With its stylish design and charcoal piping, it is the perfect match for the MAUI P900's elegant lines.
På fjernlager
This high-quality transport set contains everything you need to transport your DAVE 10 G4X system safely and easily. A "must have" for every mobile user!
Included is a trolley for your subwoofer and a transport/carrying bag for the two satellites. All accessories are perfectly matched to the DAVE 10 G4X system.
Both bags are padded and made of durable and water-repellent 1680D nylon. This protects your DAVE 10 G4X system from bumps, scratches and dust. The handle of the 8mm thick padded carry bag can be easily slipped over the trolley's extendable handle to prevent it from falling and ensure safe transport.
On the outside of the trolley, there is a zipped pocket for storing accessories such as mains and loudspeaker cables.
På fjernlager
This castor board is made of 15 mm birch multiplex, which is extremely resistant and durable due to a polyurea coating. It is specially designed for the MAUI 11 G3 subwoofer. Four 80 mm heavy-duty swivel castors, two of which have locking brakes, make it easy to move the subwoofer.
På fjernlager
Vægt (Emb.) | 60g |
Rumfang (Emb.) | 0.00074025 |
Bredde (Emb.) | 94mm |
Længde (Emb.) | 225mm |
Højde (Emb.) | 35mm |
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.