. Køb Studio & Recording Equipment hos CC ProShop (3) .

Studio & Recording Equipment

NULL

Studio & Recording Equipment

Aktive filtre

  • Mærker: Adam Hall Stands
  • Mærker: Gravity
  • Mærker: LD Systems
  • Mærker: Palmer
LD Systems Professional In-Ear Headphones black
search

LD Systems Professional...

IEHP 1

The LDIEHP1 is an extremely light, professional in-ear monitor with a broad frequency response range and a clean, balanced sound. It is very well shielded against extraneous noise and comes with three different sets of tips to fit practically any pair of ears perfectly. Additional convenience is ensured by a generously long, 1.5m-long cable. A gold-plated mini-TRS plug provides for a reliable connection.

Pris 399,00 kr.

På fjernlager

LD Systems 19" Headphone Amplifier 6-Channel
search

LD Systems 19" Headphone...

HPA 6LDHPA6 6-Channel Rackmount Headphone Amplifier

The LD Systems HPA 6 is a highly flexible 1U 19_ rack format headphone amplifier with 6 fully independent channels and comprehensive features for a wide range of professional audio monitoring applications.

Each channel provides a 6.3 mm TRS headphone output on the front panel with level control, mono/stereo switching, discrete left/right muting and a 6.3 mm TRS Aux input with Main/Aux balance control for mixing in further signal sources. Four-segment LED meters permit visual output level monitoring, and two 6.3 mm TRS outputs per channel on the rear allow for connecting a total of 18 headphones.

The HPA 6's main section features a master level control with eight-segment LED metering and 6.3 mm TRS input to mix in an additional source with all channels. The rear panel provides the main stereo inputs on balanced XLR and 6.3 mm TRS connectors and stereo outputs for daisy chaining multiple units.

Pris 1.859,00 kr.

På fjernlager

LD Systems Amplifier for headphones and wired IEM
search

LD Systems Amplifier for...

HPA 1

The LD Systems HPA 1 is a versatile headphone amplifier with high power output for stage, studio and home recording and is the perfect solution for wired in-ear-monitoring.. The compact device in a rugged, ergonomically shaped plastic housing with soft-touch surface and practical belt clip is very extensively equipped.

In addition to locking XLR connectors for the stereo signal L/R input, the HPA 1 has a balanced 3.5 mm stereo jack as AUX input, which can be used in parallel for clicks or playback. It is protected for safe operation against excessive input levels; a hollow pin socket with negative internal contact enables the connection of a network adapter for fixed operation.

A 3.5 mm stereo jack is provided as earphone and headphone output. Volume level and balance can be set with easy-grip knobs, a push-button switches between the summed mono and stereo signals. A full-fledged limiter is integrated for distortion-free playback and as protection against feedback.

The LD Systems HPA 1 has bi-colour LEDs to facilitate the features overview, which displays the response of the limiter during peaks and the battery status. At 165 grams, the headphone amplifier is distinctly light-weight and can be operated for up to 12 hours thanks to a high quality 9 V block battery.

Pris 939,00 kr.

På fjernlager

LD Systems Carry case for in-ear headphones
search

LD Systems Carry case for...

IE POCKET

This durable, lightweight carry case is designed for storing and transporting your in-ear headphones. The rigid outer shell with soft fleece lining provides solid protection from impact, scratches and dust. The case features an internal mesh pocket for ear tips and other accessories, a sturdy zip closure and detachable carabiner belt clip.

Pris 59,00 kr.

På fjernlager

LD Systems Professional In-Ear Headphones
search

LD Systems Professional...

IE HP 2

A good monitor sound in which not only the musician who plays the loudest can be heard clearly, but also your own voice and instrument, is the basis for an excellent performance. Modern in-ear monitoring systems offer a wonderful solution for optimal stage sound. They also help reduce the high volume levels that musicians' ears are often subjected to both on stage and in rehearsal rooms. The IE HP 2 is an extremely light, professional stereo in-ear headphone that boasts a wide transmission range and a clear, balanced sound.

The dynamic driver transmits distortion-free, harmonic frequencies ranging between 20 and 18,000 Hz. The optimised earpiece design ensures maximum environmental sound suppression. Thanks to the silicon and foam design that comes included in three sizes, the IE HP 2 offers maximum shielding and optimal wearing comfort for almost any ear. Its low weight of just 16 grams guarantees comfortable in-ear wear, even over extended periods. And for those who move a lot on the stage, the removable (and exchangeable) 1.55 m cable offers maximum freedom of movement. Once a performance is over, the IE HP 2 in-ear headphone can be safely stored in the included transport case until it is needed again.

Pris 929,00 kr.

På fjernlager

LD Systems Phono Preamplifier and Equalizer
search

LD Systems Phono...

PPA 2

The LD Systems PPA 2 is a very compact analogue phono preamplifier, which equalises the extremely low output signal of conventional turntables to RIAA standards. It allows you to connect to devices without any phono input, such as mixers, PA power amplifiers or sound cards.

The phono inputs are designed as RCA jacks, just like the line outputs; the PPA 2 also has a screw terminal for the ground conductor of the turntable and a 6.3 mm stereo jack for connecting a headset. The THD factor of the preamplifier is below 0.05% and the channel separation is -75 dB.

The LD Systems PPA 2 uses a 12 V AC adapter; a bright LED indicates the power supply on the top of the sturdy metal chassis.

Pris 289,00 kr.

På fjernlager

Palmer Professional DI box active
search

Palmer Professional DI box...

PAN 02 PRO

The Palmer PAN02 PRO is an active DI box with outstanding additional functions. These include an unbalanced XLR input, in addition to the 3-way attenuator -10, -20, -30 dB and a switchable gain of 12 dB, connected with a maximum output voltage of +20 dBu. The ground lift switch has a "lift" position allowing adjustments between a "soft and hard grounding" . The balanced output is achieved with a high quality transformer in the Mumetall housingthat was specially developed for this purpose. The PAN02 PRO can be powered either with a 9 V battery or 48 V phantom power. A two-colour LED indicates which source supplies the power.

Pris 2.359,00 kr.

På fjernlager

Palmer Passive speaker simulation DI box
search

Palmer Passive speaker...

RIVER ilm

You've found your perfect amp sound, but somehow it sounds different on every stage?

The Palmer ilm speaker simulation DI box removes all the uncertainties of amp micing such as microphone choice, acoustic environment and positioning. With a sophisticated filter switch simulating the sound behaviour of a real guitar speaker, it captures your authentic sound, even without a microphone. Its direct signal always sounds the same, whether at home, in the (home) studio, during rehearsals, or on stage, whatever the room size.

The Palmer ilm offers three analog guitar speaker simulation settings, which represent typical guitar speaker models. We'll leave the flowery names to the others; on the Palmer ilm , they are called "normal", "mellow" and "bright".

Generally, the Palmer ilm is looped in between the guitar amp output and guitar speaker; but it can also be operated on the amplifier's line out. For input-level adjustment, the ilm has a pad switch with three settings: 0, -15 and -30 dB.

The output of the Palmer ilm is balanced and transformer isolated which means there is no interference or ground loop hum when connecting it to a mixing console or audio interface. With the Palmer ilm, you can always rely on what really matters: Your music, your instrument and your sound.

Pris 1.369,00 kr.

På fjernlager

Palmer Passive DI box
search

Palmer Passive DI box

RIVER wipper

If you need to pick up the pure sound of your guitar, bass or keyboard, you need a high-quality DI box which does not alter the natural sound or add any noise.

The Palmer wipper is a single channel passive DI box with a high-quality transformer, which also handles high levels without distorting or losing the pure sound of your instrument. With a ratio of 10:1, it can be used for optimal impedance and level adjustment to connect instrument signals from guitars, bass, keyboards or synthesisers to a balanced microphone input. At the same time galvanic isolation prevents ground loop hum, so that the signal remains pure, clear and ultra-low noise, without any interference. Thanks to a switchable 30 dB pre-attenuation, the wipper can also be looped in between amplifier output and the loudspeaker.

The Palmer wipper is an easy-to-use problem solver. Its passive construction means it does not need any batteries or a phantom power. This makes it extremely fail-safe and also virtually indestructible thanks to its aluminum and steel casing. With its ability to retain the natural sound of your instrument, it also cuts a fine figure studio and live environments. This way you can simply be true to your sound.

Pris 1.169,00 kr.

På fjernlager

Rack Stand 6 U
search

Rack Stand 6 U

STRS 6 U
  • Rack stand 6 units high
  • Black finish, drilled tapped for M5 screws
  • 12 screws included
Pris 129,00 kr.

På fjernlager

Rack Stand 12 U
  • På tilbud!
  • -20,00 kr.
search

Rack Stand 12 U

STRS 12 U

  • Rack stand 12 units high
  • Black finish, drilled tapped for M5 screws
  • 24 screws included
Pris 159,00 kr. Normalpris 179,00 kr.

På fjernlager