Speaker Pole M20 Thread
SPS 822
Extendable speaker pole, steel black, with M20 screw thread.
På fjernlager
.
Filtrer efter
Status
Selections
Mærker
Pris
19,00 kr. - 2.359,00 kr.
Der er 124 varer.
Aktive filtre
SPS 822
Extendable speaker pole, steel black, with M20 screw thread.
På fjernlager
The LD Systems CURV 500® ceiling mount bracket is custom designed to mate with the CURV 500® SmartLink adapter. It is made of powder coated steel, 360° rotatable and allows for a very low ceiling clearance to the speaker (only 15 mm). The bracket comes with a 20 cm safety rope to secure the CURV satellites attached to the adapter in accordance with BGV C1. Available in black or white.
Note:
Under the statutory provisions (BGV C1 § 7 "Protection against falling objects") speakers must additionally be secured for attachment to a wall bracket by means of a steel rope, for example.
På fjernlager
The LD Systems CURV 500® ceiling mount bracket is custom designed to mate with the CURV 500® SmartLink adapter. It is made of powder coated steel, 360° rotatable and allows for a very low ceiling clearance to the speaker (only 15 mm). The bracket comes with a 20 cm safety rope to secure the CURV satellites attached to the adapter in accordance with BGV C1. Available in black or white.
Note:
Under the statutory provisions (BGV C1 § 7 "Protection against falling objects") speakers must additionally be secured for attachment to a wall bracket by means of a steel rope, for example.
På fjernlager
Speaker bracket for mounting small units to walls or ceilings. Ideally suited to surround speakers in home theatre applications. The universal ball joint allows speakers to be swivelled to any angle.
Please note:
On account of statutory regulations (BGV-C1 §7 "Protection against falling objects"), loudspeakers, in addition to being attached to a wall bracket, must be secured against falling with a device such as a wire rope.
På fjernlager
Wall mount speaker bracket with mounting pole
Please note:
On account of statutory regulations (BGV-C1 §7 "Protection against falling objects"), loudspeakers, in addition to being attached to a wall bracket, must be secured against falling with a device such as a wire rope (e.g., Adam Hall S53102B or S53100).
På fjernlager
SPS 16
Robust speaker stand for devices with a 16mm flange. A perfect accessory for many mobile LD Systems products.
På fjernlager
SKDB 040
This 86 cm high loudspeaker stand is ideal for studio monitors and home speakers and is fitted with a triangular foot with an edge length of 44.5 cm. The foam-padded steel tray provides 28 x 28 cm standing space, which is sufficient for all standard monitor speakers.
The exceptionally sturdy design made with black powder-coated steel carries a maximum weight of 40 kg. Delivery also includes 4 cable clips for tidy cable organisation, as well as a set of steel spikes.
På fjernlager
SPS 56 BBlack aluminium speaker stand with pneumatic suspension
Pneumatic suspension at no extra charge! The air cushioning guarantees a secure descent and easier handling of the speaker.
På fjernlager
Truss adapter for 35 mm tripod mounts (e.g. for speaker stands) with variable width (20-40 cm). Indentations for common truss systems facilitate set-up and ensure a central position. Locking pins and cotter pins are included.
På fjernlager
SPS 54 B
På fjernlager
SPS 023
Can be fixed secure in 5 steps (each step 17 cm) with included safety bolt
På fjernlager
På fjernlager
Large microphone clamp with rubber-like clamp. Variable fit. The microphone can be easily removed with one hand. For wireless microphones. 3/8" and 5/8" thread.
På fjernlager
Microphone Shock Mount with Pop Killer
På fjernlager
The SLED 1 ULTRA XLR 3 A is a matt black gooseneck light with 4 extra bright white COB LEDs and 3-pin male angled XLR plug that works on dedicated 12 volt task light and 48 volt phantom power. The 400 mm gooseneck is easily flexible yet stays put where you bend it, the power switch is conveniently located on top of the lamp.
På fjernlager
The SLED 1 ULTRA XLR 4 is a matte-black gooseneck light with 4 especially bright COB LEDs and a 4-pin XLR connector. It operates on either 12-volt or 48-volt phantom power. The 30 cm gooseneck is both flexible and sturdy; the on/off switch is easily accessible on the lamp head.
På fjernlager
The SLED 1 ULTRA XLR 3 is a matt black gooseneck light with 4 extra bright white COB LEDs and 3-pin male XLR plug that works on dedicated 12 volt task light connectors and 48 volt phantom powered mic inputs. The 300 mm gooseneck is easily flexible yet stays put where you bend it, the power switch is conveniently located on top of the lamp.
På fjernlager
The SLED 1 ULTRA BNC is a matt black gooseneck light with 4 extra bright white COB LEDs and male BNC connector that works on dedicated 12 volt task light and 48 volt phantom power. The 300 mm gooseneck is easily flexible yet stays put where you bend it, the power switch is conveniently located on top of the lamp.
På fjernlager
The SLED 1 ULTRA USB C is a matt black gooseneck light with 4 extra bright white COB LEDs with selectable colour and USB connector. The 300 mm gooseneck is easily flexible yet stays put where you bend it, the colour is conveniently adjustable in warm white, cold white, red, green and blue.
På fjernlager
The SLED 1 ULTRA XLR 4 A is a matt black gooseneck light with 4 extra bright white COB LEDs and 4-pin male angled XLR plug that works on dedicated 12 volt task light and 48 volt phantom power. The 400 mm gooseneck is easily flexible yet stays put where you bend it, the power switch is conveniently located on top of the lamp.
På fjernlager
Streamlining MAUI installations is a breeze with this low-profile wall mount kit. It contains a wall plate and slim hook-in bracket that holds the column. They require an installation height of 15 mm only putting the column nearly flush to the wall. The plate and bracket are made of heavy-gauge steel and available in black (LDMG2IK1) or white (LDMG2IK1W) powder coating finish. The kit also includes two adapters for the system_s multipin connectors which provide loudspeaker and terminal block connectors to hook up the column and sub.
På fjernlager
Customized to mount CURV 500 satellites attached to the SmartLink adapter on subwoofers, the CURV 500 distance bar is made of powder coated steel with an M20 bottom end thread. It features a steel collar with set screw and safety pin for secure height adjustment. The base tube can be disassembled for a transport length of 58 cm only.
På fjernlager
CURV 500 SSB
The stable, round CURV 500® SSB speaker stand base made of powder-coated steel with integrated extension offers a strong support for the distance bar of the CURV 500® DB.
På fjernlager
Customized to mount CURV 500 satellites attached to the SmartLink adapter on subwoofers, the CURV 500 speaker pole is made of powder coated steel with an M20 bottom end thread. It features a steel collar with set screw and safety pin for secure height adjustment. The base tube can be disassembled for a transport length of 58 cm only. Also suitable for DAVE 8 series.
På fjernlager
The CURV 500® TS spacer rod is specifically designed for mounting CURV satellites onto Smart Link adapters and subwoofers and is made of powder-coated steel with an M20 thread at the lower end. It has a steel sleeve with locking screw and safety stud for secure height adjustment. The lower rod can be unscrewed to achieve a transport length of just 60.5 cm.
På fjernlager
Streamlining MAUI installations is a breeze with this low-profile wall mount kit. It contains a wall plate and slim hook-in bracket that holds the column. They require an installation height of 15 mm only putting the column nearly flush to the wall. The plate and bracket are made of heavy-gauge steel and available in black (LDMG2IK1) or white (LDMG2IK1W) powder coating finish. The kit also includes two adapters for the system_s multipin connectors which provide loudspeaker and terminal block connectors to hook up the column and sub.
På fjernlager
DAVE 10 G4X STAND
The DAVE 10 G4X stand with star flange adapter is built to be extremely sturdy and made of powder-coated steel tubes.
The height adjustment with the easy-grip, triangular tightening sleeve is as easy as it is extremely fast. Another outstanding feature is the round base, which provides a stable and secure footing thanks to its weight and flat rubber feet. Thanks to VARIT®-WEIGHT compatibility, the base plate can be made heavier with additional weight plates.
På fjernlager
MAUI G2 SPS
With this set, MAUI 11 G2 and 28 G2 subwoofers and columns are easily and quickly mounted and taken apart. The heavy cast iron base with 50 cm steel tube attachment adjusts the column to the optimal height; it can also be screwed directly onto the base for use at home or in low-ceilinged rooms. The set includes a 5 m speaker cable and two adapters for the multipin connectors which are equipped with speaker and Euroblock sockets for connecting the column to the subwoofer. The MAUI base set is available with a black (LDMG2SPS) or a white (LDMG2SPSW) powder coating.
På fjernlager
The LD Systems CURV 500® mounting bracket is designed to mate with the CURV 500 SmartLink adapter. It is made of powder coated die cast aluminium, is fully adjustable on all axes and can therefore be individually aligned. It includes a 20 cm steel safety rope to secure the CURV 500® satellites attached to the SmartLink adapter in accordance with BGV C1.
Note:
Under the statutory provisions (BGV C1 § 7 "Protection against falling objects") speakers must additionally be secured for attachment to a wall bracket by means of a steel rope, for example.
På fjernlager
The LD Systems CURV 500® mounting bracket is designed to mate with the CURV 500 SmartLink adapter. It is made of powder coated die cast aluminium, is fully adjustable on all axes and can therefore be individually aligned. It includes a 20 cm steel safety rope to secure the CURV 500® satellites attached to the SmartLink adapter in accordance with BGV C1.
Note:
Under the statutory provisions (BGV C1 § 7 "Protection against falling objects") speakers must additionally be secured for attachment to a wall bracket by means of a steel rope, for example.
På fjernlager
Made of heavy duty steel, this U-bracket is custom designed for mounting the LD Systems SAT 122 G2 installation loudspeaker parallel to walls. It lets you swivel the speaker for optimum orientation.
The wall mount is available with a black (item no. LDSAT122G2WMB) or white powder coating finish (item no. LDSAT122G2WMBW).
På fjernlager
Made of heavy duty steel, this U-bracket is custom designed for mounting the LD Systems SAT 122 G2 installation loudspeaker parallel to walls. It lets you swivel the speaker for optimum orientation.
The wall mount is available with a black (item no. LDSAT122G2WMB) or white powder coating finish (item no. LDSAT122G2WMBW).
På fjernlager
Made of heavy duty steel, this U-bracket is custom designed for mounting the LD Systems SAT 102 G2 installation loudspeaker parallel to walls. It lets you swivel the speaker for optimum orientation.
The wall mount is available with a black (item no. LDSAT102G2WMB) or white powder coating finish (item no. LDSAT102G2WMBW).
På fjernlager
Reducer flange or adapter from 36 mm (e.g. speaker stand) to 16 mm. Speakers with a 16 mm flange can be installed onto a normal loudspeaker stand using this adapter.
På fjernlager
This wall bracket makes it possible to precisely position active STINGER® 28 A G3 models. It is made with powder-coated steel, it holds up to 21 kg and it can be precisely positioned both horizontally and vertically. Its swivel range is 160°, the downward tilt of the loudspeaker is continuously adjustable up to 40°. The solid wall panel is 5 mm thick and equipped with an eyelet for safety cables in accordance with BGV C1.
På fjernlager
Made of heavy duty steel, this U-bracket is custom designed for mounting the LD Systems SAT 102 G2 installation loudspeaker parallel to walls. It lets you swivel the speaker for optimum orientation.
The wall mount is available with a black (item no. LDSAT102G2WMB) or white powder coating finish (item no. LDSAT102G2WMBW).
På fjernlager
This extra heavy duty wall mount for active STINGER® 8_ models is made of powder-coated steel and provides horizontal plus vertical adjustment for precision aiming. It supports loudspeakers up to 11 kg. Side to side swivel is 160° while down tilt is continuously variable to a maximum of 40°. The heavy duty 5 mm wall plate features a safety rope eyelet in accordance with BGV C1.
På fjernlager
Made of powder coated steel, this U-bracket is designed for mounting Stinger® 28 G3 models parallel to walls and ceilings. The loudspeaker can be swivelled for optimum orientation.
På fjernlager
Made of heavy duty steel, this U-bracket is custom designed for mounting the LD Systems SAT 262 G2 installation loudspeaker parallel to walls. It lets you swivel the speaker for optimum orientation.
The wall mount is available with a black (item no. LDSAT262G2WMB) or white powder coating finish (item no. LDSAT262G2WMBW).
På fjernlager
This heavy duty wall mount for Stinger® 10" models is made of powder-coated steel and provides horizontal plus vertical adjustment for precision aiming. Side to side swivel is 160° while down tilt is continuously variable to a maximum of 40°. The heavy duty 5 mm wall plate features a safety rope eyelet in accordance with BGV C1.
På fjernlager
Made of heavy duty steel, this U-bracket is custom designed for mounting the LD Systems SAT 262 G2 installation loudspeaker parallel to walls. It lets you swivel the speaker for optimum orientation.
The wall mount is available with a black (item no. LDSAT262G2WMB) or white powder coating finish (item no. LDSAT262G2WMBW).
På fjernlager
The freedom to achieve the sound you want is the concept behind the ICOA and its matching U-mounting bracket as well.
It gives you complete flexibility to mount the ICOA in different ways - to the wall, either horizontally or vertically, or to a truss using an optional clamping tool.
You can install the bracket on the wall with six screws and quickly and effortlessly "click" your ICOA into place with the Easy-Click system. All that's left to do is to fasten everything down with a safety screw.
The U-bracket's cable feedthrough behind the ICOA keeps things looking neat and tidy. Once the ICOA is installed, you can freely swivel it around in 10° increments up to 180°. Enough flexibility to find your ideal angle.
På fjernlager
STINGER® 12" and 15" models can be installed on walls with this adjustable powder-coated steel mounting bracket. One end is inserted into the tripod holder and the other fixed with a practical lever screw. To The loudspeaker can be swivelled in the bracket for optimum alignment.
På fjernlager
CURV 500 STS
If the distance between the speaker base and the satellites on a CURV 500® array system needs to be increased for enhanced stereo experience, the CURV 500® STS is the optimal solution. This Stereo Set includes the CURV 500® DB distance bar, a round CURV 500® SSB speaker stand base with integrated extension, a SmartLink® adapter and a 8 metre speaker cable. The CURV 500® Entertainer Set can be operated with this set in the left and right channels with two satellites each. When purchasing a further four satellites, i.e. twice the CURV 500® S2 Set with two speakers each, you can even operate eight array satellites in stereo mode. This configuration with a subwoofer and 8 array satellites is particularly suitable for voice applications.
På fjernlager
The freedom to achieve the sound you want is the concept behind the ICOA and its matching U-mounting bracket as well.
It gives you complete flexibility to mount the ICOA in different ways - to the wall, either horizontally or vertically, or to a truss using an optional clamping tool.
You can install the bracket on the wall with six screws and quickly and effortlessly "click" your ICOA into place with the Easy-Click system. All that's left to do is to fasten everything down with a safety screw.
The U-bracket's cable feedthrough behind the ICOA keeps things looking neat and tidy. Once the ICOA is installed, you can freely swivel it around in 10° increments up to 180°. Enough flexibility to find your ideal angle.
På fjernlager
The LDSATWMB10 is fully adjustable on all axes and can therefore be individually aligned. It is compatible with all SAT G2 speakers, Dave 8 and DAVE 10 G4X satellites. But is also suitable for direct installation in the wood or plastic housing of other speakers.
It comes with a 20 cm long steel safety cable, with which the mounted speakers can be secured against falling, in accordance with BGV-C1 § 7.
Note:
Under the statutory provisions (BGV C1 § 7 "Protection against falling objects") speakers must additionally be secured for attachment to a wall bracket by means of a steel rope, for example.
På fjernlager
The freedom to achieve the sound you want is the concept behind the ICOA and its matching U-mounting bracket as well.
It gives you complete flexibility to mount the ICOA in different ways - to the wall, either horizontally or vertically, or to a truss using an optional clamping tool.
You can install the bracket on the wall with six screws and quickly and effortlessly "click" your ICOA into place with the Easy-Click system. All that's left to do is to fasten everything down with a safety screw.
The U-bracket's cable feedthrough behind the ICOA keeps things looking neat and tidy. Once the ICOA is installed, you can freely swivel it around in 10° increments up to 180°. Enough flexibility to find your ideal angle.
På fjernlager
The SUWMB10 is fully adjustable on all axes and can be individually aligned. It is compatible with all speakers with an appropriate hole pattern or is suitable for direct installation in wood or plastic housing.
It comes with a 20 cm long steel safety cable, with which the mounted speakers can be secured against falling, in accordance with BGV-C1 § 7.
Please note:
On account of statutory regulations (BGV-C1 §7 "Protection against falling objects"), loudspeakers, in addition to being attached to a wall bracket, must be secured against falling with a device such as a wire rope.
På fjernlager
The SUWMB10 is fully adjustable on all axes and can be individually aligned. It is compatible with all speakers with an appropriate hole pattern or is suitable for direct installation in wood or plastic housing.
It comes with a 20 cm long steel safety cable, with which the mounted speakers can be secured against falling, in accordance with BGV-C1 § 7.
Please note:
On account of statutory regulations (BGV-C1 §7 "Protection against falling objects"), loudspeakers, in addition to being attached to a wall bracket, must be secured against falling with a device such as a wire rope.
På fjernlager
Made of powder coated steel, this U-bracket is designed for mounting Stinger® 10" models parallel to walls and ceilings. The loudspeaker can be swivelled for optimum orientation.
På fjernlager
This extra heavy duty wall mount for STINGER® 12" and 15" models is made of powder-coated steel and provides horizontal plus vertical adjustment for precision aiming. Side to side swivel is 160° while down tilt is continuously variable to a maximum of 40°. The heavy duty 5 mm wall plate features a safety rope eyelet in accordance with BGV C1.
På fjernlager
SMBS 5 W
Wall mount speaker bracket with mounting pole
Please note:
On account of statutory regulations (BGV-C1 §7 "Protection against falling objects"), loudspeakers, in addition to being attached to a wall bracket, must be secured against falling with a device such as a wire rope (e.g., Adam Hall S53102B or S53100).
På fjernlager
Made of powder coated steel, this U-bracket is designed for mounting STINGER® 8" models parallel to walls and ceilings. The loudspeaker can be swivelled for optimum orientation.
På fjernlager
MIX 6 G2 SET 2
This set consists of two robust speaker stands for the MIX 6 (A) G2 speakers, a 10 metre long speaker cable (Jack) and a high-quality, padded transport bag for both speaker stands.
The speaker cable is intended to connect the passive fullrange model MIX 6 G2 to the MIX 6 A G2 for slave use.
På fjernlager
This heavy duty wall mount for Stinger® 8" passive models is made of powder-coated steel and provides horizontal plus vertical adjustment for precision aiming. Side to side swivel is 160° while down tilt is continuously variable to a maximum of 40°. The heavy duty 5 mm wall plate features a safety rope eyelet in accordance with BGV C1.
På fjernlager
When you face challenges like mounting lighting equipment, positioning cameras or loudspeakers at the proper angle, hanging Molton and backdrops, or mounting other equipment safely on a truss, you need just the right companion you can trust in.
The new Super Clamp now offers you the possibility to fix heavy objects such as lighting equipment easily with one click. The "One-Click Auto-Lock", snaps the fixing bolt directly into place.
Whether working as a photographer, a YouTuber in a home studio, or as a lighting technician attaching lights to a truss, the Super Clamp gives your creativity the freedom it requires.
As well as having an impressive load capacity, the rugged Super Clamp can be used in practically any situation and on any surface - curved or flat. Your new clamping companion can support up to 20 kg and enjoys German TÜV certification.
See for yourself how quick and easy it is to mount your equipment securely using the Super Clamp.
På fjernlager
På fjernlager
SLS 6 CB
This square T-bar fits onto all lighting stands with 16 mm sockets and is a direct replacement for our AH-Stand SLS6. It features 4 fixture mounting points and holds up to 25 kg evenly distributed. The 92 cm T-bar comes with a set of matted M8 x 45 mm bolts and wing nuts.
På fjernlager
38163
Floor and wall mounting plate for all PAR16/36/56/64 Flood and Spotlights. Easy to use with bolt and butterfly nut through center mounting hole. Three mounting holes ( Ø 5 mm) to fix the plate to the wall or floor if required. Simple, elegant and inexpensive method for mounting PAR cans!
På fjernlager
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.