På tilbud!
-20,00 kr.

Lighting Stand T-Bar with...

SLTS 017 CB

This square T-bar fits onto all lighting stands with 28 mm sockets and is a direct replacement for our AH-Stand SLTS017. It features 4 fixture mounting points and holds up to 45 kg evenly distributed. The 123 cm T-bar comes with a set of matted M8 x 45 mm bolts and wing nuts.

139,00 kr. 159,00 kr.

På lager

På tilbud!
-60,00 kr.

Lighting Stand large with...

SLTS 017 E

Lighting Stand large with holding fixture for 28 mm TV Spigot

579,00 kr. 639,00 kr.

På lager

På tilbud!
-200,00 kr.

Gravity Lighting Stand with...

LS 331 B

The LS 331 B lighting stand features a large heavy steel base providing a firm footing and a single extension for a maximum height of 2.4 m. The 35 mm pole includes a male threaded M20 insert, the base tube has a female M20 end. Two integrated base handles facilitate transport.

1.349,00 kr. 1.549,00 kr.

På lager

På tilbud!
-60,00 kr.

Gravity Super Mini T-Bar...

LS SUPER TB 01

If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this, such as the LS 331 B from Gravity. However, if you install a standard T-bar, the combination appears clumsy and oversized. You don't need a clavilux, just two spots.

The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm, it blends seamlessly into any environment, even museums and galleries. Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into position, removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However, despite its slimline elegance, there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two, extra spigot inserts can be installed in the additional mounting holes.

As you are probably already aware, ergonomic locking screws, interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly.

529,00 kr. 589,00 kr.

På lager

På tilbud!
-110,00 kr.

Gravity Lighting Stand with...

LS TBTV 28

The GLSTBTV28 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. The unbreakable height adjustment collars are made of steel for additional strength and feature safety pins to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberized T-Joint _ making the T-Bar not only easier to handle and carry but also look better than regular stands.

909,00 kr. 1.019,00 kr.

På lager

På tilbud!
-290,00 kr.

Wind up stand with T-Bar black

SWU 400 T

The SWU400T is an affordable lighting stand that features convenient height adjustment by means of a hand crank. Thanks to its high load bearing capacity of 85 kg, the removable crossbar, and the upper tube with a diameter of 35 mm, the SWU400T is also suitable for use as a speaker stand.

The sturdy steel construction has a black powder-coated finish; the upper tube and extensions are galvanized. A levelling foot ensures secure positioningof the wind up stand even on uneven surfaces. All adjustable elements are secured with spring bolts in addition to the tommy screws. The SWU400T weighs 19.7 kg and is extendable from a minimum height of 190.5 cm to a maximum of 4m.

2.069,00 kr. 2.359,00 kr.

På lager

Universal Hook Clamp with...

SUPER CLAMP MK2

When you face challenges like mounting lighting equipment, positioning cameras or loudspeakers at the proper angle, hanging Molton and backdrops, or mounting other equipment safely on a truss, you need just the right companion you can trust in.

The new Super Clamp now offers you the possibility to fix heavy objects such as lighting equipment easily with one click. The "One-Click Auto-Lock", snaps the fixing bolt directly into place.

Whether working as a photographer, a YouTuber in a home studio, or as a lighting technician attaching lights to a truss, the Super Clamp gives your creativity the freedom it requires.

As well as having an impressive load capacity, the rugged Super Clamp can be used in practically any situation and on any surface - curved or flat. Your new clamping companion can support up to 20 kg and enjoys German TÜV certification.

See for yourself how quick and easy it is to mount your equipment securely using the Super Clamp.

269,00 kr.

På lager

På tilbud!
-60,00 kr.

Lighting Stand large with...

SLTS 017

Large lighting stand with crossbar and TV spigot adaptors (length 123 cm).
Including set of 4 screws with washer, safety disc and wing nuts

659,00 kr. 719,00 kr.

På lager

På tilbud!
-20,00 kr.

Lighting Stand

SLS 6

Lightweight lighting stand with crossbeam and 2-stage boom arm
Including set of 4 screws with washer, safety disc and wing nuts

359,00 kr. 379,00 kr.

På lager

Universal Hook Clamp with...

SUPER CLAMP

Perfect for lighting and multimedia applications
Adjustable clamping lever - can be operated in any position
Full metal (stainless steel and die-cast aluminium alloy)
For mounting on round and square tubes as well as on flat objects
Clamping range: 13 _ 55 mm
5/8" (16 mm) hexagonal or circular pin insert
1 x M6 and 2 x M5 thread
TÜV certified
Max. load capacity: 20 kg
Not oxidising
Various mounting bolts available as an option

249,00 kr.

På lager

Gravity Remote operating...

LS OP 1

Anyone who works as a lighting technician in theatres, TV studios, congress centres or other production venues knows: the optimal illumination of a stage is precision work. At the same time, the tight schedules of a production rarely allow for fetching a ladder every time to manually adjust static spotlights high up in the rig - not to mention the safety risk for the people on site.

With the LS OP 1, Gravity® has a solution for these situations in its portfolio. The extendable operating pole enables the alignment of installed spotlights at great heights. The adjustment options include the pan and tilt angle, as well as focus adjustment (Pan/Tilt/Focus) via standard bells and the folding of barndoors.

The maximum length of 6.4 metres is achieved via three individually lockable extensions and can be extended to the desired length in a few simple steps. In addition, the robust but lightweight aluminium construction facilitates operation enormously.

At the upper end of the LS OP 1 is the integrated hook for hanging in the pan/tilt/focus bells. The crank at the lower end of the pole allows the hook to be easily turned into the desired position. The crank can be removed for easy and space-saving transport.

2.809,00 kr.

På fjernlager

Universal Hook Clamp with...

SUPER CLAMP MK2 SET 1

When you face challenges like mounting lighting equipment, positioning cameras or loudspeakers at the proper angle, hanging Molton and backdrops, or mounting other equipment safely on a truss, you need just the right companion you can trust in.

The new Super Clamp now offers you the possibility to fix heavy objects such as lighting equipment easily with one click. The "One-Click Auto-Lock", snaps the fixing bolt directly into place.

Whether working as a photographer, a YouTuber in a home studio, or as a lighting technician attaching lights to a truss, the Super Clamp gives your creativity the freedom it requires.

As well as having an impressive load capacity, the rugged Super Clamp can be used in practically any situation and on any surface - curved or flat. Your new clamping companion can support up to 20 kg and enjoys German TÜV certification.

See for yourself how quick and easy it is to mount your equipment securely using the Super Clamp.

329,00 kr.

På fjernlager

Universal Hook Clamp with...

SUPER CLAMP SET 1

Perfect for lighting and multimedia applications
Adjustable clamping lever _ can be operated in any position
Full metal (stainless steel and die-cast aluminium alloy)
For mounting on round and square tubes as well as on flat objects
Clamping range: 13 _ 55 mm
5/8" (16 mm) hexagonal or circular pin insert
1 x M6 and 2 x M5 thread
TÜV certified
Max. load capacity: 20 kg
Not oxidising
Various mounting bolts available as an option
16 mm M10 bolt for SCP710B

309,00 kr.

På fjernlager

Safety Rope 4 mm length 1 m

S 42100Adam Hall safety cables - clearly comply with legal regulations

6 x 19 + fibre core
Eyelet at both ends

ATTENTION: Screw link S93061 has to be ordered separately

79,00 kr.

På fjernlager

Saveking® Safety Rope 5 mm,...

S 58060 SKSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

189,00 kr.

På fjernlager

Saveking® Safety Rope 5 mm,...

S 58062 SKBSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

259,00 kr.

På fjernlager

Screw Link long, 6 mm thick

S 93061Adam Hall safety cables - clearly comply with legal regulations

Chain Link for S42100
Stamped according to DIN 56926 (code number: 200)

29,00 kr.

På fjernlager

Safety Rope 5 mm with Screw...

S 56100

Adam Hall safety ropes - clearly oriented to the legislator

6 x 19 + FE
Thimble on both sides
One side with captive quick connection link (SVG), galvanised, 90 x 9 mm
Stamped according to DIN 56927 B200 (code: BGV C1)
Up to 45 kg unit weight with two-line securing method

139,00 kr.

På fjernlager

Câble d'acier 4 mm with...

S 45062 B

6 x 19 + fibre core
Eyelet at both ends
One end with unlosable chain link (black galvanised, 6 mm thick) 0.60 m.
Up to 20 kg device weight in the case of double-stranded securing method

179,00 kr.

På fjernlager

Safety Rope 3 mm, 0.6 m,...

S 37060 PAdam Hall safety cables - clearly comply with legal regulations

6 x 19+ fibre core
Eyelet at both ends
One end with non detachable chain link (galvanised, 5mm thick)
Stamped by sticker according to DIN 56927 B140

99,00 kr.

På fjernlager

Safety Rope 8 mm length 5 m...

S 80500

Wire cable suitable for cable holders of types DSH 50S (5 mm) 80VS (8 mm). The cut end of the cable is tin-plated to ensure cable durability when used with the cable holder, guaranteeing complete suitability for practical applications (see illustration). For this reason, all suspension cables for Adam Hall DSH wire cable holders are provided with tin plating at one end and a eyelet at the other. Certified in accordance with BGV C1.

6 x 19 + fibre core
Tin-plated at one end with
Eyelet at the other end

449,00 kr.

På fjernlager

Wire Rope Holder with...

S 50 S V3

Wire rope holder Type50SV III M12
With coupling part ring, locking nut and six-ball mechanism.
Wire rope holders are marked and certified according to BGV-C1
Please also note our information in the download area

419,00 kr.

På fjernlager

Safety Rope 4 mm with Screw...

S 45100Adam Hall safety cables - clearly comply with legal regulations

6 x 19 + fibre core
Eyelet at both ends
One end with unlosable carabiner (90 x 9, with screw lock)
Stamped: WLL 250 kg W/K
Up to 20 kg device weight when using two safety cables

119,00 kr.

På fjernlager

Saveking® Safety Rope 5 mm,...

S 58100 SKSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

189,00 kr.

På fjernlager

Safety Cable, 6 mm with...

S 66100

Adam Hall Safety Cables - conform explicitly to legislation

6 x 19 + FE
Cable eye stiffener on both sides (in accordance with DIN-EN 12385-4)
One side with captive quick link, galvanised, 90 x 9 mm
Stamped in accordance with DIN 56927 B200 (code: BGV C1)
Up to 60 kg equipment load capacity in a double strand installation

179,00 kr.

På fjernlager

Safety Rope 3 mm, 0.6 m,...

S 37062 PAdam Hall safety cables - clearly comply with legal regulations

6 x 19+ fibre core
Eyelet at both ends
One end with non detachable chain link (galvanised, 5mm thick)
Stamped by sticker according to DIN 56927 B140

149,00 kr.

På fjernlager

Safety Rope 4 mm with Fall...

S 43100 SKSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

169,00 kr.

På fjernlager

Safety Rope 8 mm length 1 m

S 82100

Adam Hall safety cables - clearly comply with legal regulations

6 x 19 + fibre core
Eyelet at both ends
Stamped: BGV C1 I.W 8 mm 295 kg
Up to 100 kg device weight when using two safety cables

ATTENTION: Chain link S93100 has to be ordered separately!

179,00 kr.

På fjernlager

Round Sling with Fabric...

SX 01205

Black roundsling with fiber or wire rope inlay and lashings - Made in Germany. Our roundslings with fiber inlay are featuring a tubular coating made from extra dense polyester webbing with Pu-impregnation. The core consists of endlessly laid polyester yarn. In addition to the marking on the label, the working load can be learned from a colored seam. All roundslings are furnished with user_s manual excerpts on an identification label, marked with utilization length and working load limit (WLL).

99,00 kr.

På fjernlager

SAVEKING® Safety Rope 3 mm...

S 33060 SKSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

139,00 kr.

På fjernlager

Saveking® Safety Rope 5mm,...

S 58102 SKBSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

269,00 kr.

På fjernlager

Safety Rope 3 mm with Screw...

S 37060Adam Hall safety cables - clearly comply with legal regulations

6 x 19+ fibre core
Eyelet at both ends
One end with non detachable chain link (galvanised, 5mm thick)
Stamped according to DIN56926 (code number: 140)

89,00 kr.

På fjernlager

Steel Rope 3 mm with Chain...

S 37062 B

6 x 19 + fibre core
Eyelet at both ends
One end with non detachable chain link (galvanised, 5 mm thick)

139,00 kr.

På fjernlager

Gravity Carry Bag for...

BG DBLS 331

The BG DBL 331 is a heavy duty carry bag with 10 mm padding that holds the two GLS331B and GLS431B lighting distance poles. The bag is made from tough 1680D nylon that is water repellent and easy to clean, a padded divider keeps the poles separate to prevent scratches. The bottom and all other points of stress are reinforced for extra strength, two carry straps with comfortable wrap-around handle and the heavy gauge single pull zipper closure of the lid provide handling convenience.

469,00 kr.

På fjernlager

På tilbud!
-15,00 kr.

Lighting Stand T-Bar with...

SLS 6 CB

This square T-bar fits onto all lighting stands with 16 mm sockets and is a direct replacement for our AH-Stand SLS6. It features 4 fixture mounting points and holds up to 25 kg evenly distributed. The 92 cm T-bar comes with a set of matted M8 x 45 mm bolts and wing nuts.

84,00 kr. 99,00 kr.

På fjernlager

På tilbud!
-15,00 kr.

Floor and Wall Mounting...

38163

Floor and wall mounting plate for all PAR16/36/56/64 Flood and Spotlights. Easy to use with bolt and butterfly nut through center mounting hole. Three mounting holes ( Ø 5 mm) to fix the plate to the wall or floor if required. Simple, elegant and inexpensive method for mounting PAR cans!

- Including suitable bolt M8 x 35 and butterfly nut

94,00 kr. 109,00 kr.

På fjernlager

På tilbud!
-60,00 kr.

Lighting Stand, Medium

SLTS 09

Medium lighting stand with crossbeam
Including set of 4 screws with washer, safety disc and wing nuts

459,00 kr. 519,00 kr.

På fjernlager

Gravity Floor Stand for...

LS FLOORX B

The LS FLOORX B is a compact stand for placing light fixtures on the stage floor. The folding design of powder coated steel with ergonomic locking screw enables space saving storage, hefty rubber feet prevent marring of the floor while providing a secure grip.

119,00 kr.

På fjernlager

På tilbud!
-30,00 kr.

Gravity Universal T-Bar for...

LS TB 01

This universal crossbar quickly converts stands with a 35 mm tube diameter into light stands. It is made with light but robust aluminium and is installed quickly and safely using the robust flange with ergonomic adjustment screw.

199,00 kr. 229,00 kr.

På fjernlager

På tilbud!
-210,00 kr.

Gravity Lighting Stand with...

LS 431 W

The GLS 431 W lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.

1.669,00 kr. 1.879,00 kr.

På fjernlager

Gravity Lighting Stand with...

LS TBTV 17

The GLSTBTV17 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity.

The unbreakable height adjustment collars are made of steel for additional strength to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberised T-Joint _ making the T-Bar not only easier to handle and carry but also better looking than regular stands.

689,00 kr.

På fjernlager

Gravity Clamping Pole...

LS VARI®-POLE 01 B

Made of lightweight, black anodized aluminium tubing with a secure locking mechanism, the Gravity VARI®-POLE extends from 210 cm to 370 cm and quickly mounts between floors and ceilings. It is held in place by pressure, and strong rubber on both sides for a variety of other applications.

819,00 kr.

På fjernlager

Gravity Twin Extension...

SP 5522 B

The SP 5522 B is a classic tripod speaker and lighting stand made from thick walled, yet lightweight powder coated steel tubing with a load capacity of 30 kg and twin extensions for a maximum height of 3 m.

The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. The unbreakable height adjustment collars are made of steel for additional strength featuring safety pins to securely lock the extensions in place.

The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. A set of black coding rings is included with the SP 5522 B, additional ring packs are available in a wide array of colors for instant personalization.

759,00 kr.

På fjernlager

På tilbud!
-210,00 kr.

Gravity Touring-Lighting...

TLS 431 B

Well equipped to handle the daily grind and time constraints of touring: That's the TLS 431 B light stand from the Gravity Touring Series. Its heavy steel base featuring three M20 female threads for off-centre installation guarantees a firm footing in all circumstances, whereas two integrated handles make it easy to transport. In comparison to the standard series, the base is slightly smaller, but it still offers the same amount of stability. The added bonus here is that it can now also be used as a divider in Transflex cases. The base-to-pole connection has been made stronger by adding a reinforcing sleeve to prevent wobbling. With the 35 mm extension tube featuring a M10 female thread, the stand can be extended in height up to 2.40 meters. Thanks to the automatic LockPin® technology, it has never been easier to adjust the height of a stand. Because the pin automatically snaps into the holes when adjusting upwards, a separate locking pin is no longer necessary.

1.939,00 kr. 2.149,00 kr.

På fjernlager

Gravity Lighting Stand with...

LS 431 B

The GLS 431 B lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.

1.769,00 kr.

På fjernlager

SAVEKING® Safety Rope 4 mm,...

S 43062 SKBSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

219,00 kr.

På fjernlager

SAVEKING® Safety Rope 3 mm,...

S 33062 SKBSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

189,00 kr.

På fjernlager

Screw Link long, 10 mm thick

S 93101Adam Hall safety cables - clearly comply with legal regulations

Chain Link for S82100
Galvanised
10 mm thick
Stamped according to DIN 56926 (code number: 550)

79,00 kr.

På fjernlager

Saveking® Safety Rope 4 mm,...

43102PSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

239,00 kr.

På fjernlager

SAVEKING® Safety Rope 3 mm,...

S 33100 SKSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

159,00 kr.

På fjernlager

Black 5 mm Steel Rope with...

S 56102 B

Steel rope, 6 x 19 + SE
Thimble eye at each end
One end with captive quick link (QL), black zinc-plated, 90 x 8 mm
Up to 45 kg device weight with dual strand securing method

219,00 kr.

På fjernlager

SAVEKING® Safety Rope 4 mm...

S 43060 SKSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

159,00 kr.

På fjernlager

SAVEKING® Safety Rope 3 mm,...

S 33102 SKBSAVEKINGS Shock-Absorbing Safety Rope

Germany_s only safety rope with an inspection certificate according to the Regulations of the German Employers Liability Insurance Association (BGV)

Safety rope with an integral brake for controlled dissipation of fall energy, approved as a safety rope for use in the entertainment industry (BGV C1).

When conventional wire ropes are used, high levels of linear momentum can result if secured equipment falls. SAVEKINGS wire ropes incorporate a loop with a brake clamp. In the event of a fall, the loop constricts, thus absorbing the high shock forces. A color marking on the brake clamp serves as an indicator that the rope is in good condition.

199,00 kr.

På fjernlager

Lighting Equipment

Lighting Equipment